How to get logout to work for partner applications

Hi
I have configured the demo partner application of the ssosdk 3.07
And login / logout works.
My problem is that the sample logout code, only clears the
cookie of the partner application, so the code redirects the
appliation to the login server which reauthenticates the partner
application.
So shall the logout code clear the portal30_sso cookie.
My other problem is the other way around, when I log out of
Portal, I also need to be logged out of the partner application,
have anybody have any success with that.
Jakob

FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
iTunes Purchase Problems: How to Report a Problem to iTunes Support
http://tinyurl.com/7tscpa7
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
Getting Refunds for your iTunes Store Purchases
http://www.labnol.org/software/itunes-app-store-refunds/13838/
Canceling a Digital Subscription
http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
 Cheers, Tom

Similar Messages

Validation in Accounting-how to get it to work for PO creation?

Hi!
I created a validation rule from GGb0 to limit cost center assignment to some G/L expence accounts.
It works great for all the transactions that get posted to BSEG: Journal Entries, IR, GR.
How can i get it to work (to validation if it is a correct cost center with G/L expense account) during creating a PO type K (for expense PO's) from ME21N?
I know that it is a complete set of tables and PO is not triggering the validation because it is not creating a FI document, but i still need it to work!
Any ideas?
Points will be assigned!

Hi,
Can you please list out the coding done with this validation rule in Controlling via tcode OKC7 and/or GBB0.
I am using R/3, V 4.7 and not ECC.
While creating a Purchase Order or Purchase Requisition, Project expense account should only generate a validation error when an Account Assignment Category K (Cost Center) is selected but should not generate any validation error when the same project expense account is selected with an account assignment category A (Asset). Please note that this project expense account is commonly used expense ccount in PR/PO for thel fixed asset purchases and would like to have a validation rule so that it cannot be used with any cost center. Figured out there are two options 1. BAdI User Exit and 2. CO Validation Rule.
I would appreciate if anyone has the detailed coding part of the complex CO validation rule via OKC7 and commitment management part?
Regards,
Srinivas Puppala
Edited by: Srinivas Puppala on Aug 10, 2009 8:13 PM
Edited by: Srinivas Puppala on Aug 13, 2009 5:30 PM

How to get Sharepoint OAuth clientId for Java application used in any tenant

I'm developing a web application for Office365 using the SharePoint 2013 REST service.
This app is hosted by my web server. The development language is Java.
I plan that users in any tenant use my app via OAuth.
How can I register my app to get clientId for OAuth?
I attempted to register my app by seller dashboard, but it seemed like register applications
to seller dashboard should be developed by .NET. And I couldn't use appregnew.aspx
because cilentId from appregnew.aspx could use only in one tenant.
Please let me know any better way to register my app.
Thanks,
Tarou

Hi,
SharePoint 2013 provide three types of app, SharePoint-hosted app, Provider-hosted app and Autohosted app. Which one do you used?
Here is an article from MSDN for your reference:
Guidelines for registering apps for SharePoint 2013
http://msdn.microsoft.com/en-us/library/office/jj687469(v=office.15).aspx
Best Regards
Dennis Guo
TechNet Community Support

ITunes wont open for me. it keeps saying "the Disc "untitled playlist" cannot be read. An unknown error occurred (-69)." don't know how to get it to work. Please help

iTunes wont open for me. it keeps saying "the Disc "untitled playlist" cannot be read. An unknown error occurred (-69)." don't know how to get it to work. Please help

It is likely a hardware failure
http://support.apple.com/kb/TS3694?viewlocale=en_US#error1

How do I get sound to work for games...?

How do I get sound to work for game apps, when I have sound for other items on ipad2?

Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

Can anyone tell me how to get crossfade to work...was working ok, but now for some reason when i click on a track and try to drag on a fade it just highlights the track but does not leave a fade on?

can anyone tell me how to get crossfade to work...was working ok, but now for some reason when i click on a track and try to drag on a fade it just highlights the track but does not leave a fade on?

Hello mate!
Are you sure u have the option on the up-right side of the arrange window checked to x-fade?

I cant get a photo project to email the moblile me address to someone else. I know how, but it has stopped working for some reason. Instead of pulling up the web address on the email form, it puts an error message? Any ideas?

I cant get a photo project to email the moblile me address to someone else. I know how, but it has stopped working for some reason. Instead of pulling up the web address on the email form, it puts an error message? Any ideas?

Michael,
The link for the word 'HERE' directs to a Evergreen School District page, which outside of Mobile Me and/or Aperture. Your school district network might be intercepting the request from Aperture and displaying the 'network authentication page' that you see, instead of the email. I would get with the IT department to see if they can help you get around this.
Have you also tried using the 'Tell a Friend' feature from another network location, like starbucks or your home?
Cheers,
Owen.

How to get iMessage to work when all it says is waiting for activation

How to get iMessage to work when all it says is waiting for activation

Hi Howell,
Welcome to Apple Support Communities.
This article on troubleshooting FaceTime activation has some steps you can try:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Have a great day,
Jeremy

Suddenly the apps I downloaded won't work. The screen "blinks" for a second as if the app is loading, and then returns to the home screen. All the apps that came with the iPod seem to be working fine. How to get them all working again?

Suddenly the apps I downloaded won't work. The screen "blinks" for a second as if the app is loading, and then returns to the home screen. All the apps that came with the iPod seem to be working fine. How to get them all working again?

First try a hard reset. To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
If still no luck, try downloading another free app from the App Store.
More troubleshooting here.
http://support.apple.com/kb/ts1702
Lastly, try to restore the iPod from a previous backup or restoring it to factory settings.
B-rock

I have purchased itunes match but the cloud will not load on my ipad 4.the only music that will show up is stuff that i bought from the itunes store.any ideas on how to get this to work?

i have purchased itunes match but the cloud will not load on my ipad 4.it works on my iphone 5 & it originally worked on my ipad.the only music that will show up is stuff that i bought from the itunes store.any ideas on how to get this to work?

On the MBP, in iTunes, switch to Song view and enable the iCloud Status column by pulling down View > View options and selecting the option for "iCloud Status." Close the small window. Look for any tracks that have a status of "waiting." If you see several of them disable iTunes Match while holding down the Option key. Quit iTunes, wait a few seconds, then open it again and turn iTM back on. Let it compelete the scan. Wait until all tracks that are "waiting" have a status of either "matched" or "uploaded."
On the iPad, turn off iTunes Match then launch the Music app and let the contents clear out. Power cycle the iPad for good measure, then re-enable the service once all the tracks in iTunes have been processed.

Has anyone figured out how to get speech recognition working with sticky keys enabled on mountain lion?

I'm trying to use speech recognition to input text on my iMac running the latest mountain lion, 10.8.3.
I have sticky keys enabled.
When I try to start speaking by pressing the function key twice nothing happens. I can only get it to work if I disable sticky keys.
The same problem occurs with all the other modifier keys as shortcut, they do not work with sticky keys.
When I try to select a different shortcut, I am unable to select a two key combination, but am limited to one.
If I select the F6 key, or any other single key, I am able to start speech recognition. However the second time that I press the key, it does not stop recognition and process my words. Instead, it restarts the recognition.
Has anyone figured out how to get speech recognition working with sticky keys enabled?
Or a way to get an individual key shortcut to start on the first press and process it on the second?
Or a way to get key combinations to work, as specified by the help:
Dictation On and Off
To use Dictation, click On.
When you’re ready to dictate text, place the insertion point where you want the dictated text to appear and press the Fn (function) key twice. When you see the lighted microphone icon and hear a beep, the microphone is ready for you to speak your text.
Shortcut
By default, you press the Fn (Function) key twice to start dictation. If you like, you can choose a different shortcut from the menu.
To create a shortcut that’s not in the list, choose Customize, and then press the keys you want to use. You can press two or more keys to create your shortcut.

I noticed with version 10.8.4 of OS X that I am now able to select F6 to activate, and the return key to complete the speech recognition. This is still different than the description of how these should function that's included in the help, but at least it's an improvement.

I just got the iphone 4s and i cant figure out how to get siri to work it seems to be the old voice command. HELP!

i just got the iphone 4s and i cant figure out how to get siri to work it seems to be the old voice command. HELP!

Did you enable Siri in settings?
Settings > General > Siri > ON
If Siri is off, all you get when pressing the home button for 1 second is the old Voice Control.

Can't get Extreme to work for me

I bought an Airport Extreme in May and just cannot get it to work for me. It most likely has to do with my settings as it seems complicated for me. My ISP refuses to help me other than providing me with some router/IP info. They claim they have had problems with Airport Extremes (anti-Mac) and do not know how to help me and I should contact Apple. My ISP also claims they have been successful with their few Mac clients using NetGear and they can help with that.
This is depressing to me because I am loyal Mac user and have never had problems with any Mac product. But I can't figure this one out on my own. I do not see phone support for the Airport Extreme and I feel exhausted by this.
Is anyone is willing to walk me (could be painful) through this or willing to buy my Extreme and I will concede to my pro-Windows ISP. In the end, all I want is one of my computers to be online wireless.
Sigh.
Jeanine
PowerMac G5, dual-2.0 ghz Mac OS X (10.4)

Hi Jeanine,
Don't assume that it is just a question of anti-Macness. There are legitimate reasons why an ISP (or a business) decides not to support this weird device. It goes against most of what is considered reasonable by the leading manufacturers, but hey, it's Apple. They usually don't care about that as long as they have loyal customers who still trust Apple.
I'd say that the critical settings are in the Internet tab. Assuming you have your computer connected to the airport using an Ethernet cable, and that you have the Admin Utility running, go to the Internet Tab and make sure that:
1. Connect using: Ethernet
2. Configure IP - It depends. You say that your ISP has given you some router/IP info. In that case, you need to choose "Manually" and enter all the fields following this setting. Otherwise, they might have told you that you will be assigned a DHCP address, and in this case choose "Using DHCP." The last two boxes ("Domain Name" and "DHCP ID") are usually not utilized.
3. For "Ethernet WAN Port" Automatic should suffice, but in my case, I had to force it to 100 Full Duplex or otherwise wouldn't work. Go figure!
4. For Connection Sharing, most probably you'll have "Share a public IP address" but if the ISP gives you a set of addresses, you may need to choose "Distribute a Range..." Not probable, though.
Leave the other two tabs as default, but make sure that your computer has DHCP enabled.
Following this steps won't give you a fully working wireless network (we have not configured anything yet) but at least should give you a working state for computers connected via Ethernet wire. We can take the next step then.
Good luck. This router (and the iPhone for similar reasons) are going to make may Apple loyal customers rethink future purchases. It has certainly happened to me.
Paco

...I just bought this and i can't get it o work for me, I had noticed chat windows right up until I

..I just bought this and i can't get it o work for me, I had noticed chat windows right up until I Paid for it now I am left alone I need help. or my Money back. I knopw I am writing to no one.

Good day,
How can I help?
Kind regards,
David
Adobe Systems

How to get the owner name for the file in ftp using abap ?

Hi folks ,
How to get the owner name for the file in ftp using abap ? please help me very ugernt . I tried with all standard FTP commands
but doest work out me . Helping in this regard highly appreciated ...
Thanks and regards,
Swarupa Vanarchi

Hi
dont you have used the os user while calling the FTP_CONNECT FM?
Hope you are not talking about the user executing the FTP program.
Else If you are talking about the FTP file creator then its not related to abap as you can handle it by maintaining the user in file name itself.
May be i am going too far with if and elses here as your question possesses no clarity.
Plz elaborate your requirement before anybody can help.
Regards
sateesh

How to get logout to work for partner applications

Similar Messages

Maybe you are looking for