How to get low performances alert for Hyper-v Host ON scom

Hello Expert,
We have to implement a scenario VM Live migration which involved (SCOM,SCVMM,SCORCH Parts).
where SCOM parts  will monitor the performances of SCVMM 's Hyper-V hosts and VMs running the within the Hyper-v hosts.
when the VMs utilization exceed the threshold and then scom monitor checks the performances of Running Hyper-v Hosts ,then using SCORCH automation ,VMs are moved to one of the best performances the Hyper-v hosts.
To implement this ,I have integrated SCOM 2012 R2 AND SCVMM 2012 R2 AND enabled the PRO Tips.
but don't know how to get alerts and configured related to performances of VMs and Hyper-v host.
What will be next  needed to achieved this from SCOM PARTS.
Thanks and Regards
RICHA KM 

Hi,
In addition, hope the management pack for Hyper-v 2012 can be helpful for you, please download and import it to your management group:
http://www.microsoft.com/en-us/download/details.aspx?id=36438
Regards,
Yan Li
Regards, Yan Li

Similar Messages

  • How to get subordinate org units for a given org unit within specific dates

    hi,
    How to get subordinate org units for a given org unit within specific dates

    Use the following Func module ..
    HRWPC_RFC_STRUCTURE_GET
    *--Get the sub org.unts for the given selection.
        CALL FUNCTION 'HRWPC_RFC_STRUCTURE_GET'
          EXPORTING
            ROOT           = root_org   <-- Give the Org unit 
            EVPATH         = 'O-O_DOWN'
            BEGDA          = s_date-low
            ENDDA          = s_date-high
          TABLES
            T_OBJEC        = t_objec
            T_STRUC        = t_struc
          EXCEPTIONS
            NOTHING_FOUND  = 1
            INTERNAL_ERROR = 2
            OTHERS         = 3.
        IF SY-SUBRC <> 0.
          MESSAGE i000 WITH 'No Sub Orgunits for ' s_objid-low.
        else.
    *--Prepare final sub org.units tabl.
          loop at t_objec.
            if t_objec-objid ne s_objid-low.
              it_orgunit = t_objec-objid.
              it_orgunit-begda   = t_objec-begda.
              it_orgunit-endda   = t_objec-endda.
              APPEND it_orgunit.
            endif.
          endloop.
        endif.

  • How to monitor the performances of VMs & Hyper-v Cluster host node running on SCVMM Cluster.

    hello...,
    How to monitor the performances of VMs & Hyper-v Cluster hosts node running on SCVMM Cluster from SCOM so that we can
    Identify the highest utilized(CPU and Memory ) VM on that from cluster  hyper-v host.
    Identify the lowest utilized (CPU and Memory )Hyper-v Host in the Cluster .
    After identifies VMs and Hyper-v cluster  host on SCVMM , so that we  can  proceed to do migrate the Highest Utilized VM to Lowest Utilized
    Hyper-v cluster host. 
    To identified and implement above ,what are the things I need to do or configured on SCOM.
    Thanks
    RICHA KM

    hello...,
    How to monitor the performances of VMs & Hyper-v Cluster hosts node running on SCVMM Cluster from SCOM
    so that we can
    Identify the highest utilized(CPU and Memory ) VM on that from cluster  hyper-v
    host.
    Identify the lowest utilized (CPU and Memory )Hyper-v Host in the Cluster .
    After identifies VMs and Hyper-v cluster  host on SCVMM , so that we  can  proceed
    to do migrate the Highest Utilized VM to Lowest Utilized Hyper-v cluster host. 
    To identified and implement above ,what are MPs i need to installed on SCOM for implementing
    this.
    Thanks
    RICHA KM

  • BODS 3.1 : How to trigger an email alert for the jobs on BODS server ?

    Hi All.
    I have this request.
    BODS 3.1 : How to trigger an email alert for the jobs on BODS server ?
    We have jobs scheduled on BODS running smoothly and absolutely fine.
    But to check, i am logging into the admin console and check for the jobs status.
    I would like to have an email to be received from BODS after each job is finished.
    It could succuessful. Or it could fail.
    Whatsoever, i wish to receive an email alert as soon as a job is finished.
    Can anyone advise me as to whether this could be made possible.
    And if yes, how this could be done.
    Thanks for your help in advance.
    In BOE CMC / for webi / schedule / we find an option to send email for a job success or a job failure.
    Is there any option similar to that in BODS ?
    Also would like to know :
    how to use the smtp_to or mail_to functions ?
    how to set up the smtp server for this ?
    thanks
    REgards
    indu
    Edited by: Indumathy Narayanan on May 31, 2011 3:47 PM

    Hi.
    Since am new to this BODS. I need some help.
    I already have many jobs which are running absolutely fine.
    And when a job runs, and finishes, am able to see the trace saying
    e.g. :
    Job_abc is completed successfully.
    We got the smtp service activated for our test server.
    and we hae a group email id.
    I have put the details of the smtp server / ip address / and said apply restarted.
    The i created a simple test script as below :
    print (' Before email ' );
    smtp_to('abc@company_name.com', 'Job ' || job_name() ||' on ' || host_name() || ' has FAILED',
    ' the job has failed', 0, 0);
    print('After Email ');
    It does send a email to as per smtp_to whatever email is specified.
    But how to differentiate between a job success
    And a job which has failed.
    I wish to have a mail which says on the subject :
    'Job ' || job_name() ||' on ' || host_name() || ' has completed successfully'
    ==> IF it is a success
    OR
    'Job ' || job_name() ||' on ' || host_name() || ' has failed'
    ==> if it has failed
    How to make the system identify, whether
    to send a success message or a error message whatever
    Could anyone advise.
    thanks
    indu

  • I am having a issue with getting data useage alerts for my iphone 4s

    I am having a issue with getting data useage alerts for my iphone 4s from AT&T.  I do not download anything huge at all.
    I looked into it and figured out that the phone dials out nightly at 12:29am every night.   I went into my settings and went to general..about..diagnostics and useage..then diagnostics and useage data to see this.  I then clicked don't send...but I am still getting useage alerts.  Can anyone help me please...
    Thanks

    Honestly, from reading the thread linked, they all come off as a bunch of whiney people that cannot be bothered to help themselves.
    Little to nothing in that thread indicates an issue beyond inept consumers.  Yes, I read several pages on the incessant gripes.  Very few made any actual attempts to troubleshoot issues before whining about the "Apple issue" and those that did actual troubleshooting got their issues resolved.
    So no, Apple has nothing to fix beyond a few specific devices that are experiencing hardware issues.
    If you have actually put forth effort and done the basic troubleshooting, take the device to Apple for evaluation and possible replacement.  Whining will get nothing accomplished.

  • How to get the last error for while loop?

    How to get the last error for while loop? I just want transfer the last error for while loop, but the program use the shift register shift all error every cycle.

    What do you mean by "get" and "transfer"?
    If the shift register is not what you want, use a plan tunnel instead.
    Typically, programmers are interested in the first, not last, error.
    Can you show us your code so we have a better idea what you are trying to?
    LabVIEW Champion . Do more with less code and in less time .

  • How to get title templates library for CC?

    How to get title templates library for CC?  Do you have to download and install PP 6 to get them?

    Try here Library, title templates, template projects missing: Premiere Pro, After Effects, Encore

  • How to get balance sheet report for profit centers

    hi
    how to get balance sheet report for profit centers, is there any transcation code to get that report or i need to create a report painter report for this

    Hi,
    You can use T. code KE5Z for actual line items.
    More to this you can use program RFBILA10 (Use T. code SE38 and program RFBILA10) for complete blance sheet.
    The transaction is for special purpose ledger but this program RFBILA10 can be used for profit center balance also.
    In selection, you can give ledger name which is generally 8A for profit center ledger.
    Reg

  • How to get a performing equalizer in iTunes

    Hello
    How to get a performing equalizer in iTunes?

    Try downloading and reinstalling the latest version of iTunes.
    If that doesn't help, give us a little more information about the tracks that are having the problem and what you are seeing.

  • I went to add my iPod to another computer and when I did it re-bought all of my music and I would like to know how to get my money back for it?

    I went to add my iPod to another computer and when I did it re-bought all of my music and I would like to know how to get my money back for it?
    anyonr know how I can get my money back????????

    Go to Settings>General>Reset>Erase all content and setting. Then re-setup the iPod with your account/media. To redownload iTunes purchases see:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • How to get 64 bit version for premiere elements 12

    How to get  64-bit version for Premier Elements 12 ? 
    I download from ADMISY site.
    Click on win 64 bit and download it.
    When I try to install ther is a error  this download version is not for 64 bit I have try many times but same result

    Hello
    I have been away some days
    ADMISY is a software partners for Adobe
    I running Win 7 Home Edition
    I have received a card with a code when I bought the program and the I
    download from ADMISY
    Sending serial and installation warning
    PhotoshopElements_12_WWEFDJ.7z
    PhotoshopElements_12_WWEFDJ
    PremiereElements_12_WWEFDJ_win32.7z
    PremiereElements_12_WWEFDJ_win32
    I can not find a 64 bit version of 32-bit or 64-bit version of downloads
    This is information I have
    Best regards
    Erling Magnusson
    2015-02-04 22:33 GMT+01:00 Adobe Forums <[email protected]>:
        How to get 64 bit version for premiere elements 12  created by A.T.
    Romano <https://forums.adobe.com/people/A.T.+Romano> in *Premiere
    Elements* - View the full discussion
    <https://forums.adobe.com/message/7162950#7162950>

  • How do I remove an alert for a calendar item that has long since been deleted? and yet goes off mysteriously, un-deletably, and un-editably every single ****** week !!

    How do I remove an alert for a calendar item that has long since been deleted? and yet goes off mysteriously, un-deletably, and un-editably every single ****** week !!

    I have the same problem with my iPhone.  I set up a recurring calendar event for every Thursday.  That event is no longer happening during the summer, so I went in and chose one from the current month and selected Delete.  Then it gve me two choices, one of which was to Delete All Future Events of this one, and that's what I chose.  I figured, this way, I'll still be able to see the ones from the past, but won't have to see (or hear the alert) for the future ones.
    The following week, my phone alerted me to the appointment, and even showed it on the initial screen, even though it wasn't in the calendar.  I went in to the calendar and NOTHING was scheduled for that day.  So why is this happening?
    So I set up a new recurring event, for in the past, then went in and deleted all furture occurances, and it did the same thing... still alerted to an event that was no longer in the calendar.
    I hope somebody else has found a fix, or at least a reason for why this is happening.

  • How to get the depreciation areas for an asset in particular period

    Hi frndz,
      how to get the depreciation areas for an asset in a particular period for writeup or manual depreciation method.
    Thanks and regards.
    Harisumanth.Ch

    Try table ANLB, then read ANLC.
    Regards.

  • How to get the version no. for service po?

    Hi,
    How to get the version no. for service po?For material po we are getting the version from EKKO-REVNO but for service po Ekko-revno is blank.
    Regards,
    Rachel.

    Hiee,
    It is not like service PO does not have revision.
    REVNO will only exists for any document if amendment is made after releasing it. If in EKKO for all service PO revision number is blank then test if version management is active for document type
    MM->Purchasing->Version management -> External documents
    Here check for your doc type and purchase org version management is active.
    Regs,
    Appie

  • Running snow leopard on MBP and am not getting an sound alerts for Mail or Calendar; Have checked all setting in sound in the system preferences

    Running snow leopard on MBP and am not getting an sound alerts for Mail or Calendar; Have checked all setting in sound in the system preferences

    Hi..
    For Mail, from your Mail menu bar (top of your screen) click Mail > Preferences then select the General tab.
    Click the pop up menu to the right of New messages sound to make a selection.

Maybe you are looking for