How to get MacBook Pro to recognize full 1366x768 resolution of Plasma?

When I hook up my MacBook Pro via DVI to my 1366 x 768 pixel Samsung plasma screen, the computer recognizes it as a Samsung PDP at 1024x768. The resulting image is stretched to fit the full 1366 horizontal pixels and thus ruins the aspect ratio. I know that I can switch the display mode on the Samsung to display 4x3 with black bars on the side, but what I really want is for the computer to take advantage of the full 1366x768. How do I do that?

Check your documentation. Most Samsung 1366x768 monitors do not support the full native resolution in DVI mode unless using a specific card to drive them made by PixelPerfect Digital.
I'm not entirely sure why that may be, but it does figure prominently in the product information on the Samsung product site.

Similar Messages

Can't get MacBook Pro to recognize Motorola H500 Bluetooth headset

Hello all,
I am trying to get my MacBook Pro to recognize a Motorola H500 Bluetooth headset. Bluetooth is ON and "discoverable" on my mac. When I go to system preferences and click "bluetooth", then "devices", the headset won't show up (it is turned ON). I tried clicking "Set up new device..." and won't work either.
Any tips on how i can make this work?
Thanks a lot!

You need to put the H500 into discoverable mode:
turn it off
hold "call button" for 5 seconds or until the sold blue circle light appears
now go do the bluetooth set up on your Mac....your H500 will show up and then just click thru continue....

How do i get MacBook Pro to recognize an iRig as an input device?

I have a Mid 2012 MacBook Pro Retina running Mavericks with the combo headphone-out/mic-in port. I am trying to connect an iRig using this port to track guitar in Logic or GarageBand but when i plug in the iRig it is only seen by the computer as a headphone out (there is no line input or external mic detected). This same iRig works flawlessly on my iPhone so i know it is not broken. Similarly, i plugged my iPhone earbuds-with-microphone into the port on the MacBook Pro and it recognizes both the headphones and external mic so the port seems to work ok.
Any ideas????

Make sure the power is off the irig and then plug it in.
took me a few tries, restarting the computer etc. brand new Mavericks 13"
Now it seems to recognize it on the computer as an input.
Logic seems to be listening to it (when I jiggle the cable)
but I still can't get a mic to work....
I'll let you know...

How can i get macbook pro to recognize my samsung fascinate to transfer music?

I want to transfer the music already on my samsung fascinate phone onto my new macbook pro using the usb mass storage device option. when i plug the phone into the usb port the computer recognizes that its there, but i am unable to do anything with it. shouldnt i be able to open the files on the phone and transfer them to the computer? any help would be great so i can get my music back

Contact Samsung's tech support and/or read its user manual.

How to get macbook pro to work with a canon wft-e6 wireless file transmitter

I recently purchased a Canon WFT-E6 wireless file transmitter for my 1DX Canon Camera. I can't find a way to set up my Notebook Pro to work with this device. Has anyone run into the same issue? and if so do you have a solution?

My guess is that you will see a wireless network in range using your Airport menu. The Airport menu looks like
. If it is all gray and nothing is inside of it, then the network was not properly setup. I do not have one, but if you tried to setup the network, and you can't see the device, then you might need Canon's support.

How does the MacBook Pro with Retina display scaled resolutions work?

How does it work? I think I have the basics figured out; is this correct (by this, I mean below)?
It is a scaled resolution (1/2 I think of the actual display resolution) therefore, the size of the pixels would be equivalent to 1440 x 900, but each pixel that is represented on screen is actually 4 pixels, therefore making it look sharper, so things are physically the same size if it would be an actual 1440 x 900 screen, but it looks sharper on the Retina display because each pixel is actually 4 pixels?
Thanks

If you read the specs on them you will discover that the MBP is way more powerful then the MBA. The big feature of the MBA is light weight. If you need a powerful computer then you want the MBP instead.
Allan

Can not get MacBook Pro 10.7.2 connected to Panasonic LCD projector to work

Any suggestions on how to get MacBook Pro 10.7.2 working with a LCD Panasonic Projector Model # PT-LB10NTU?

Thanks for the replys.
After spending an hour plus, uninstalling and reinstalling drivers and still not able to print, my husband, sits down, plugs in an ethernet cable, reinstalls the printer with the ip, and it prints. !!! I'd already done that , but that was before I deleted the preferences and installed the Gutenprint driver. I think it was the new Gutenprint driver that did it.

I have an iMac, an iPhone, and a MacBook Pro. My full iTunes library is on the iMac and iPhone, but only a handful of songs are on my MacBook. They are all associated with the same Apple ID. How do I get all of my music on the laptop?

I have an iMac, an iPhone, and a MacBook Pro. My full iTunes library is on the iMac and iPhone, but only a handful of songs are on my MacBook. They are all associated with the same Apple ID. When I try to sync, I get a warning message stating that I will lose songs on my phone which aren't on the laptop. How transfer my music from my phone to the laptop?

Hey kbert73
I would do a transfer of purchases from the phone and not sync. If you sync then it will want to start over and sync music that is on the MacBook Pro. If you want to transfer the music, check out the article below that will give you multiple options on how to move. I have also provided on how to sync with multiple computers.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/ht1202
Thanks for using Apple Support Communities.
Regards,
-Norm G.

How do I get my MacBook Pro to recognize my Toshiba external hard drive?

How do I get my MacBook Pro to recognize my Toshiba external hard drive? I'm working on transferring my music from our home computer to my new laptop and I already got all my music onto the hard drive but now, when I plug it into my MacBook Pro, it doesn't recognize it. There isn't an icon that pops up and nothing happens at all. The blue light on the hard drive that indicates that it knows it is plugged into something comes up but that's about it. Someone told me I might have to "format" it but I don't know what that means and I don't know how to do it. I just want to get my music from the hard drive to my laptop so please help!

natgray17 wrote:
I don't know about your first question... I went to finder, preferences, then general but I didn't see anything for the hard drive.
Huh, in the Finder menu, Preferences, you will see this:
Nope, disk utility cannot see it. I've tried unplugging it and plugging it back in but it still won't recognize it.puter that's a Mac...
If DU cannot see it then the preferences is just an academic exercise.
If this is a USB drive then as mentioned above you may need a powered USB hub since there may not be enough power from the USB to run the drive. What else do you have plugged into the USB ports? If there's some stuff you can unplug it then do it and see if your drive mounts.
What do you mean from a Windows machine? It's a Toshiba hard drive and I put my music on it from my home computer that's a Mac...
Which is all I wanted to know, i.e., whether the drive came from a Winows machine. So it's been formatted and created on a mac. Therefore it should mount on this other mac machine. So it most likely is a power problem.

I had an older iPhone 3 and just purchased the 4S. How do I get my MacBook Pro to recognize it?

I had an older iPhone 3 and just purchased a 4S. How do I get my MacBook Pro to recognize it so I can sync it with my computer?

Make sure you have the latest version of iTunes installed on you MacBook then plug the USB cable into your iPhone 4s.

How do I get my macbook pro to recognize my android phone so I can transfer photos from the phone

how do I get my macbook pro to recognize my android phone to I can transfer photos from the phone

you could try this:
http://www.android.com/filetransfer/
there's something called "Airdroid" on the Play store (whatever that is)
or if your files are on an sd card, you may wish to use an sd card reader. Just plugging it in via USB might possibly work. There's also something called DoubleTwist (basically iTunes for Android, which will allow you to
sync your music , photos, videos, etc
hope one of these works for you
John B

Macbook pro had a full startup disc and crashed

Hi, need help! My macbook pro had a full startup disc and crashed, I have since deleted a lot of files to clear space (23gb+) but now I can only get it to boot up in safe mode. I've run disc utility and the HD is fine also ticked all the login items to disable them (I think) in the Users and Groups. It did reboot normally once after doing this but soon froze up again after 5 or 10 mins. I think it is a 3rd party extension issue but how do I find it?

"Ticking" the login item only hides it. It's still loading. You need to select it then click the - sign. You should probably start there, the other stuff is more involved.
http://www.macworld.com/article/2047747/take-control-of-startup-and-login-items. html

Help on how to fix macbook pro 13inch 2010 (cpu 1 caller 0x47f5ad)?

help on how to fix macbook pro 13inch 2010
Hi, I need some peoples help on fixing my laptop. I have a macbook pro 13 inch 2010 model, and it refuses to boot into either osx or windows. Every time I prevoiusly treid to boot into mac osx I got this error "panic (cpu 1 caller 0x47f5ad)". there is an image below. and when I had treid to boot into windows (bootcamp) I got this error "A disk read error occured Press Ctrl+Alt+Del to restart". I have treid to restart the computer and gotten both these errors agian. The strange things is this deosn't always happen, sometimes I don't get any errors, and it just has the apple logo whith the spinning loading thing happening below (I left this for an hour and it still kept spinning, and never loaded). Other times it just show white whith no errors but never loads, sometime it lets me alt to select which os to boot into (nether work), but other times it just freezes and shows a mouse cursor on the white background. it's not consistent.
Most recently it has a flashing folder on a white background. I treid inserting my osx disc and went into disc utility but it doesn't detect my hardrive. It may be a faulty hardrive or sata cable but I dont know (I have links below). I was recently (well for the first time), defragmenting my windows partition, it hit temparatures of 80-85C, and stayed at that for several hours throughout the defragmentation, would this have damaged it?
I have scoured the internet and found many people whith very similar problems to me but none whith the same, and A lot of people saying that if you get the error you should just use a time machine backup, the thing is I don't have a time machine backup. The internal hardrive I am currently using on my laptop is a seagate 640gb 5400rpm (it's not an apple harddrive). every thing else it standard, standard ram and no overclocking, I was running 10.6.8 snow leopard, and windows xp profesional 32bit (split 320gb each, whith about 10gb spare on each parttion).
It would be greatly appreiciated If any one could shed some light on what I should do. I need the laptop working whithin the week (for my tafe work), but If I have to reinstall the OS's and programs it could take a long0I have a lot of programs and that could take a month. not to mention The fact that the hardrive might be completly fine and it's just a faulty sata connection. but then would I still be getting an error if thats all thats wrong?. and if it is just the error is there anyway I can fix it whitout doing a fresh install, there a error reading document blow but I cannot make heads or tails of it. I also have almost no money to afford getting it fixed.
also one last thing, I stupitidely inserted my mac osx disc 95% of the way into my macs slot loading drive when it was powered down (off). when I turned it on it sucked it in fine, but would that have caused any damage to the disc or laptop (I cannot eject the disc to check)
I have images of many of the things I described below. So any suggestions.
I have also posted this on several other websiets if that helps)
Photos
http://www.flickr.com/photos/100089102@N08/
"panic (cpu 1 caller 0x47f5ad)" error issues
http://forums.macrumors.com/showthread.php?t=1177233
http://reviews.cnet.com/8301-13727_7-10344626-263.html?tag=mfiredir
https://discussions.apple.com/thread/3256029?start=0&tstart=0
http://www.mac-forums.com/forums/switcher-hangout/258078-macbook-pro-will-not-st art-up.html
https://discussions.apple.com/thread/3965618?start=0&tstart=0
Hardrive issues
https://discussions.apple.com/thread/4225754?start=0&tstart=0
http://www.mac-forums.com/forums/other-hardware-peripherals/242064-hard-drive-no t-showing-up-disc-utility.html
How to read errors
http://developer.apple.com/library/mac/#technotes/tn2063/_index.html
other websites
http://au.answers.yahoo.com/question/index?qid=20130808212838AAYDeTk
http://forums.macrumors.com/showthread.php?p=17706929#post17706929

The problem may be that your macbook is'nt set to 'mirror image' if you go into settings, onto 'displays' there should be an option within, once youre connected, to 'mirror image' if you check this box, then the problem should be sorted, if not then maybe a dodgy cable or adapter.

How to download macbook pro (mid 2010) drivers for windows 7, without the included DVD (lost) ?

Hello everyone,
I am facing a problem with bootcamp on my Macbook pro 15" (Mid 2010, running Mos OS 10.6.6).
I have successfully installed windows 7 via Bootcamp, but I lost the Drivers DVD furnished by Apple.
I tried to download these using Bootcamp (v3.0.4), but bootcamp won't let me save it, i get this error :
"the windows support software could not be saved to the selected folder"
An Apple support article has been made for this problem ( http://support.apple.com/kb/TS3648 ), but it doesn't solve the problem in my case because I lost the furnished DVD.
So here I am, struck on this drivers issue...
So, my question is :
How to download macbook pro (mid 2010) drivers for windows 7, without the included DVD (lost) ?
Thank you for your help !
Regards

Aw, and I forgot, being in Thailand, they do not sell the installation DVD.

How to Charge Macbook pro unibody? correct way

Hi there, I have a question. just bought my Macbook pro unibody last week.
I want to know how to charge Macbook pro the correct way ?
When im working. should I charge all the time ? I should wait until the battery drain 10% left ?
When is the best time to charge the battery 75%,50% or less that 10% ?
Should I turn off asap when the charger once the green light turn on ? should I leave overcharge ? normally I charged mac at night which more than 8 hour charge , is this good ?
Thanks guys.
E

Here is apple's instructions in calibrating the battery KB Article
As for leaving it plugged in, that's the normal process most people do, there is circuitry in the computer to ensure the battery does not get over charged. Aside from calibrating it, I'd avoid any deep cycles, that is draining it completely, you're better off plugging it in when you have the opportunity and not wait until the battery is nearly drained. Deep cycles can shorten the life span of the battery.

How to get MacBook Pro to recognize full 1366x768 resolution of Plasma?

Similar Messages

Maybe you are looking for