How to get mail from exchange 2003

can any one help i have a new mac book pro and i wont to get mail from my companey
we use microsoft exchange server 2003 help help help please

Hello metalcraft,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
OS X Mountain Lion: Cannot connect to Exchange server in Mail after upgrading
http://support.apple.com/kb/TS4363
If you have issues connecting to the Exchange server or don't know what server addresses to use, contact your Exchange administrator or IT administrator.
Best of luck,
Mario

Similar Messages

How to get pst from Exchange 2007 server

Hi,
How to get pst from exchange server 2007 & 2010.
Regards
Anil

Hi,
Do you want to export mailboxes to a .pst file in Exchange 2007 and Exchange 2010?
If so, to export mailbox to a .pst file in Exchange 2007, we can use the Export-Mailbox cmdlet. You can refer to the following article.
How to Export Mailbox Data
http://technet.microsoft.com/en-gb/library/bb266964(v=exchg.80).aspx
To export mailbox to a .pst file in Exchange 2010, we can use the New-MailboxExportRequest cmdlet. For more details about this command, please see the article below.
Create a Mailbox Export Request
http://technet.microsoft.com/en-gb/library/ff459227(v=exchg.141).aspx
Best regards,
Belinda
Belinda Ma
TechNet Community Support

I set up two identities, the default & one more. How to get mail from the second one?

I have two different e-mail addresses that I want to get mail from. So the main/default one worked just fine. So I went to options, account settings, identities and set up the second one. But this second one doesn't appear on the start page and still when I Get Mail, it only brings in the mail from the default one. So what do I do?

You do not place your second account in Identities.
You go to the Menu Bar and select '''File-New-Existing Mail Account''' and add it there.
No Menu Bar? Press the alt key.
If using the '''AppMenu button''', click that and select''' New Message-Existing Mail Account'''

How to get mail from POP3S or IMAPS server

I have problem to get mail from pop3s or imaps potocol by javamail api.
Help me please!

Please refer the link http://www.javaworld.com/javatips/jw-javatip115.html. This could be the solution to your problem.

NO INCOMING POP MAIL from exchange 2003 server.-

My university uses a exchange 2003 server for mail and pop access is enabled on all professor accounts. Since a couple of weeks ago I had no problem at all with my university mail account on apple mail, although I had to use :
incoming mail server: "mail.myuniversity.edu.do"
user: "DOMAIN\username"
Password: "mypassword"
Authentication: Password
After december the 5th I'm not getting any mail at all, even thou the activity monitor says "incoming messages.... 83 of 83" but no message shows up on the inbox. I have noticed that the number keeps growing (84, 85, 86...) but still no message in my inbox.
the weird thing is that I'm able to see my university mail in my iphone using the synced account settings in Itunes. I thought it was a problem of my machine I have made a clean format and reinstall of osX 10.6 with the 10.6.2 combo update. I did not transfered files nor configuration, just copied my documents and reconfigured mail from scratch. I did not imported any message. After all that, the problem persist.
I have used Connection Doctor and everything looks ok. The Detail window shows this:
******************************** BEGIN OF LOG ********************************
CONNECTED Dec 25 20:37:28.201 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:110 -- socket:0x115c88b70 -- thread:0x115c74d30
CONNECTED Dec 25 20:37:28.216 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
READ Dec 25 20:37:28.648 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:110 -- socket:0x115c88b70 -- thread:0x115c74d30
+OK Microsoft Exchange Server 2003 POP3 server version 6.5.7638.1 (SvrMailAdm.rsta.pucmm) ready.
WROTE Dec 25 20:37:28.656 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:110 -- socket:0x115c88b70 -- thread:0x115c74d30
USER RSTA\sterlingjimenez
READ Dec 25 20:37:28.682 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
220 mail.pucmm.edu.do Microsoft ESMTP MAIL Service, Version: 6.0.3790.3959 ready at Fri, 25 Dec 2009 20:38:10 -0400
WROTE Dec 25 20:37:28.695 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
EHLO [10.0.1.33]
READ Dec 25 20:37:29.012 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:110 -- socket:0x115c88b70 -- thread:0x115c74d30
+OK
WROTE Dec 25 20:37:29.019 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:110 -- socket:0x115c88b70 -- thread:0x115c74d30
PASS ***********
READ Dec 25 20:37:29.030 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
250-mail.pucmm.edu.do Hello [200.88.1.167]
250-TURN
250-SIZE
250-ETRN
250-PIPELINING
250-DSN
250-ENHANCEDSTATUSCODES
250-8bitmime
250-BINARYMIME
250-CHUNKING
250-VRFY
250-X-EXPS GSSAPI NTLM LOGIN
250-X-EXPS=LOGIN
250-AUTH GSSAPI NTLM LOGIN
250-AUTH=LOGIN
250-X-LINK2STATE
250-XEXCH50
250 OK
WROTE Dec 25 20:37:29.036 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
AUTH LOGIN
READ Dec 25 20:37:29.391 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:110 -- socket:0x115c88b70 -- thread:0x115c74d30
+OK User successfully logged on.
WROTE Dec 25 20:37:29.397 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:110 -- socket:0x115c88b70 -- thread:0x115c74d30
QUIT
READ Dec 25 20:37:29.436 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
334 VXNlcm5hbWU6
WROTE Dec 25 20:37:29.447 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
UlNUQVxzdGVybGluZ2ppbWVuZXo=
READ Dec 25 20:37:29.823 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:110 -- socket:0x115c88b70 -- thread:0x115c74d30
+OK Microsoft Exchange Server 2003 POP3 server version 6.5.7638.1 signing off.
READ Dec 25 20:37:29.927 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
334 UGFzc3dvcmQ6
WROTE Dec 25 20:37:29.954 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
READ Dec 25 20:37:30.410 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
235 2.7.0 Authentication successful.
WROTE Dec 25 20:37:30.425 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
QUIT
******************************** END OF LOG ********************************
Can Anyone HELP ?
I'm Out of ideas.
Best Regards,
Sterling Jiménez R.

Hello metalcraft,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
OS X Mountain Lion: Cannot connect to Exchange server in Mail after upgrading
http://support.apple.com/kb/TS4363
If you have issues connecting to the Exchange server or don't know what server addresses to use, contact your Exchange administrator or IT administrator.
Best of luck,
Mario

How to get mail from Outlook to SAP GUI (workflow)

Hi All ,
How can we get a mail from outlook or personal mail into SAP GUI .
can it be used as an event for 'wait for event step ' in workflow . ?
Thanks ,
Naval bhatt

Hi Naval,
I just want to clarify some areas from your question:
1. Will a workflow be triggered because of the email from Outlook to SAP? Does it always have to start from the Outlook side?
The integration of SAP Workplace (thru Workflow) and Outlook is possible using the Extended Notification (tcode SWNCONFIG). Here, you can send an email from SAP to Outlook then execute a function from your Outlook message and then you will be directed to the tcode of SAP side (SAP GUI).
Regards,
Reymar

How to get mail from old computer to new in one place?

I've had lots of trouble merging my data from a G4 iMac to a new iMac. Now my problem is mail.
After the first Migration all was OK with mail. Then, because of other problems, I had to erase the entire new iMac. In doing so I lost about 10 days of mail. Now I have some new mail in the new Mac and lots of old mail in the old Mac and I can not get them together.
The new Mac has two POP folders in the Mail folder in the users Library. One has messages from 12/09 to 3/24/10. This one is named after an account I had 3+ years ago. The second POP folder has messages from only 3/29/10. It is named with the present account. Neither has the current messages that are in the inbox of Mail now. The current messages are from 3/29/10 until today but I can not find them in a folder, only by opening the mail program.
The mail prefs have been altered also. I had a major problem with a pref causing trouble ejecting disks and forbiding the Mac to start. All prefs were trashed. (I think I can find them, I kept them in folders rather than trashing them. However, there are several of these folders as I had to trash and restart several times.)
How can I get all my mail back together into one current mailbox?
Thanks.
Geoff

Thanks for this info. I wish I had know this before I migrated. And I wish the Mac sales person had know. And I wish the folks at Mac support had known. Or perhaps with so many experienced folks not knowing could it be controversial?
Be that as it may, the migration was done (several times) the new computer was non-functional but now seems to be OK. All I want now is to get my old email (from the old Mac) together with the new email (The stuff I've collected since being on the new Mac). That didn't work with the migration and getting all this straightened out has taken long enough that there is a collection of new email.
Geoff

How to get contacts from exchange account to Windows7

Hi,
All my contacts on the iPhone are held with my email account which is hosted on an exchange server (synced through activesync).
My email account is being taken away so I need to copy off my contacts and host them on the PC.
Can anyone advise on how to do this?
I'm using Windows 7 and have Outlook 2010.
Thanks
Nick

So you'd use Java to send the WebDAV protocol. Since this is a Java forum, it would help if you provided the WebDAV part of the equation and we can help with the Java part. Okay? Let us know when you have the WebDAV information.

How to migrate mails from Google Apps to MS Exchange Online IMAP (Getting error)

Any tips on How to migrate mails from Google Apps to MSOL? What is required? When I am trying to migrate using IMAP but getting fpollowing error
=======================
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:11
[email protected]
Failed
Error:
Failed to log on successfully for the following reason:
Server rejected Basic login with following message : * CAPABILITY IMAP4rev1 UNSELECT LITERAL+ IDLE NAMESPACE QUOTA ID XLIST CHILDREN X-GM-EXT-1 UIDPLUS COMPRESS=DEFLATE.
Exchange Management Shell command attempted:
'Microsoft.Exchange.Transporter.Provider.PopImap.InternetMailboxMeta' | Move-XsIMAPMailboxToExchangeOnline -AllowUnsecureConnection $false -TargetCredential 'System.Management.Automation.PSCredential' -MaxThreadCount '10' -Quiet
Elapsed Time: 00:00:11
======================
Any help will be much appreciated.
Regards
Sunil DK

I just finished migrating a client from Google Apps to Microsoft Exchange Online using the IMAP option in the Microsoft Online Services Migration Tool.
I added the mailboxes by creating a CSV file [i.e. GoogleApps(Gmail)_Mailboxes.csv] in the following format:
SourceIdentity,SourceServer,SourceLoginID,SourcePassword,TargetIdentity
[email protected],imap.gmail.com,[email protected],P@ssword1,[email protected]
[email protected],imap.gmail.com,[email protected],P@ssword2,[email protected]
[email protected],imap.gmail.com,[email protected],P@ssword3,[email protected]
Then I created a custom folder map XML file [i.e. GoogleApps(Gmail)_FolderMap.xml] to map the Google Apps (Gmail) labels to the appropriate Exchange (Outlook) mailbox folders and create those that didn't exist (i.e. Important, Starred, Follow up,
Misc, Priority) as sub-folders under the Inbox:
<?xml version="1.0" encoding="utf-8"?>
<FolderMappings xmlns="http://tempuri.org/FolderMap.xsd">



<Folder path = "INBOX">
<Property SpecialFolder = "Inbox"/>
</Folder>
<Folder path = "New Mail">
<Property SpecialFolder = "Inbox"/>
</Folder>
<Folder path = "[Root]">
<Property SpecialFolder = "Inbox"/>
</Folder>
<Folder path = "">
<Property SpecialFolder = "Inbox"/>
</Folder>
<Folder path = "Calendar">
<Property SpecialFolder = "Calendar"/>
</Folder>
<Folder path = "Tasks">
<Property Name = "Migration items/Tasks"/>
</Folder>
<Folder path = "Sent Items">
<Property SpecialFolder = "Sent Items"/>
</Folder>
<Folder path = "Sent Mail">
<Property SpecialFolder = "Sent Items"/>
</Folder>
<Folder path = "Sent">
<Property SpecialFolder = "Sent Items"/>
</Folder>
<Folder path = "Deleted Items">
<Property SpecialFolder = "Deleted Items"/>
</Folder>
<Folder path = "Trash">
<Property SpecialFolder = "Deleted Items"/>
</Folder>
<Folder path = "Drafts">
<Property SpecialFolder = "Drafts"/>
</Folder>
<Folder path = "Draft">
<Property SpecialFolder = "Drafts"/>
</Folder>
<Folder path = "Junk E-mail">
<Property SpecialFolder = "Junk E-mail"/>
</Folder>
<Folder path = "Spam">
<Property SpecialFolder = "Junk E-mail"/>
</Folder>
<Folder path = "Contacts">
<Property Name = "Migration Items/Contacts"/>
</Folder>
<Folder path = "Outbox">
<Property SpecialFolder = "Outbox"/>
</Folder>
<Folder path = "Journal">
<Property SpecialFolder = "Journal"/>
</Folder>
<Folder path = "Notes">
<Property SpecialFolder = "Notes"/>
</Folder>
<Folder path = "Public Folders">
<Property ExcludeFolder = "true"/>
</Folder>

<Folder path = "[Gmail]/All Mail">
<Property ExcludeFolder = "true"/>
</Folder>
<Folder path = "All Mail">
<Property ExcludeFolder = "true"/>
</Folder>
<Folder path = "[Gmail]/Drafts">
<Property SpecialFolder = "Drafts"/>
</Folder>
<Folder path = "[Gmail]/Important">
<Property Name = "Inbox/Important"/>
</Folder>
<Folder path = "[Gmail]/Sent Mail">
<Property SpecialFolder = "Sent Items"/>
</Folder>
<Folder path = "[Gmail]/Spam">
<Property SpecialFolder = "Junk E-mail"/>
</Folder>
<Folder path = "[Gmail]/Starred">
<Property Name = "Inbox/Starred"/>
</Folder>
<Folder path = "[Gmail]/Trash">
<Property SpecialFolder = "Deleted Items"/>
</Folder>

<Folder path = "Follow up">
<Property Name = "Inbox/Follow up"/>
</Folder>
<Folder path = "Misc">
<Property Name = "Inbox/Misc"/>
</Folder>
<Folder path = "Priority">
<Property Name = "Inbox/Priority"/>
</Folder>
</FolderMappings>
Additionally, I had to tell the Internet E-mail Mailbox Migration Wizard to use the "Individual Account Credentials" option since I was able to specify each account password in the CSV file when adding the mailboxes to Microsoft Online Services Migration
Tools console.
Just to note, the users had to manually export their contacts to a CSV file and calendars to iCal (ICS) files in order to import those items into Outlook.
I hope this will benefit others since Microsoft doesn't seem to have a custom, specifically defined migration strategy for this scenario. With Google Apps being in direct competition with BPOS/Office365, I assumed that Microsoft would have a simple
strategy using something like ActiveSync to facilitate the migration of email, contacts, calendar entries, etc. Hopefully we'll see something along those lines become available in a future release of the migration tools.
--Jon Payne

SPAM rules on Inbox after migration from Exchange 2003 - GFI Mail Essentials

Hello,
Few times ago, we had an Exchange 2003 server with mailboxes which were configured with "rulemgmt.exe" tool (from Microsoft ?) to manage users mailboxes and SPAM redirection in these mailboxes.
GFI MailEssentials (antispam) was installed on a mail relay and once a SPAM was detected, it was redirected in Inbox/SPAM folder on user mailbox thanks to the rule defined by "rulemgmt.exe".
Recently, we did a migration from Exchange 2003 to 2010. Unfortunately, "rulemgmt.exe" doesn't work anymore on Exchange 2010 and it's replaced by a "Transport Rule" which works fine but only to redirect SPAMs in Junk e-mail folder. However,
if I don't set up this transport rule, SPAM redirection still works from mailboxes which were created on Exchange 2003 and e-mails go to Inbox/SPAM as before... For new mailboxes on Exchange 2010, it doesn't work which is normal.
My question is: for old mailboxes from Exchange 2003, where are the SPAM redirection (Inbox/SPAM) information stored? I don't understand how SPAM can be redirected if the information is not stored in Exchange...
The aim is to use Junk E-mail folder with the Transport Rule at the end everywhere and to clean old rules used for Inbox/SPAM.
I contact GFI support but they couldn't help me.
Any idea?
Regards,
DeltaSM

Those old mailboxes probably have old rules still set. You can use the Outlook.exe /cleanrules switch to purge those old rules. This would require that you create an outlook profile for each of those impacted mailboxes.
You can also look at using MFCMapi -
http://support.microsoft.com/kb/2860406/en-us
When that is done, you might want to perform a Clean-MailboxDatabase and then look at the mailbox rules (get-inboxrule). If that does not work for you, could be something else within the mailbox and as such, I would recommend working with MS to get
more info.
DaDougInc

TS3988 How can I verify my icloud account without being able to get mail from the account?

How do I verify my icloud account without being able to get mail from that account?

The verification email will be sent to your primary Apple ID email address.

How can I get Mail for Exchange on my 6720 classic...

The manual says that Mail for Exchange is pre-installed. Yet, I cannot find it where the manual tells it's supposed to be. I updated to the latest fimware version a couple of months ago. So I cannot remember whether Mail for Exchange has been pre-installed before. At the OVi Store Mail for Exchange is not available for the 6720c.
How the heck can I get Mail for Exchange on my phone?

The iWork apps for a Mac and for iOS devices are different, they are different operating systems.
If your iPad was activated after 1st September 2013 (and you are using the same account that was used to activate the iPad) then you should be able to download the apps for free in its App Store app. If it was activate before that date (or you are not using the same account) then you will need to pay to download the apps.

How do I get Mail from my hotmail account?

I was wondering if I could get my mail from my hotmail account right into my mail. Also if I could get mail from an address originally opened on Windows with Outlook Express. Thanks a lot.

The short answer, for now, is you don't. It's increasingly clear that Microsoft does not want to extend this privilege to users of free HotMail accounts, not does it want to offer POP3 access to anyone other than paying HotMail Plus users at this point, and for the foreseeable future. And, IMAP: that's out of the question, apparently.
While the plugin idea is a nice one, the referenced open-source HTTPMail plug in is broken by Mac OS X 10.5, and nothing has been heard to date from the developer about an update to support Mail in Leopard.

Unable to manage Distribution list membership since moving from Exchange 2003 to Exchange 2010

Hi,
We have recently started migrating from Exchange 2003 to Exchange 2010. One of our customers used to be able to manage a security group through the outlook address book. This is a mail enabled security group where the customer is on
the "Managed by" entry and the "Manager can update membership list" is ticked.
Now that the users mailbox has been migrated to Exchange 2010, if they try and modify the membership using outlook by finding the group in the address book they get the error "changes to the distribution list membership cannot be saved. you do not have
sufficient permission to perform this operation on this object".
I have now added a test account to the managed by entry on the security group to test the problem.
I have followed the article
http://blogs.technet.com/b/exchange/archive/2009/11/18/3408844.aspx that explains how to use the EMS to give users the right to amend groups that users own. I did not run the script but entered the following commands:
New-ManagementRole -name “MyDistributionGroupsManagement_Test” -parent MyDistributionGroups
Remove-ManagementRoleEntry “MyDistributionGroupsManagement_Test\New-DistributionGroup” -confirm:$false
Remove-ManagementRoleEntry “MyDistributionGroupsManagement_Test\Remove-DistributionGroup” -confirm:$false
New-ManagementRoleAssignment -name “MyDistributionGroupsManagement_Test-Default Role Assignment Pol” -role “MyDistributionGroupsManagement_Test” -policy “Default Role Assignment Policy”
All appears to have worked ok and I have seen no errors while doing this
If I use OWA and then use the ECP, I can now see the "Public groups I own" but no groups are listed.
I have created some new distribution groups in Exchange 2010 (One dist list and one security group) to test and added the test account as an owner of both and a member of both. I still cannot amend the membership using outlook address book and the
ECP still shows no groups under "Public Groups I own"
I have seen a number of articles on how to do this and it looks like I am doing everything right and it has worked for plenty of other people. I just don't know what's going wrong.
I would be very grateful if anyone can help.
Matt

Hi Rajith,
I deleted the outlook profile and recreated it but this did not work.
I have now created a brand new mailbox on Exchange 2010 added this to the "managed by" section of the Exchange 2010 dist lists and I still get the error. I also do not see the groups listed when logging in as that user to OWA ECP and clicking on the
Groups link.
I had a look at the link you sent me and I could see that from the Exchange server when I opened the User roles to get to the ECP, clicked on Roles and Auditing and then User Roles the only policy applied is "Default role assignment". When I select
the details for this, under Distribution groups, "My Distribution Groups" is not ticked but my new one that I created "My DistributionGroupsManagement_Test" is. So this looks ok.
Any other ideas?
Matt

Moving public folders from exchange 2003 to exchange 2010 error while moving replicas

Dear All,
i am in the process of migrating from Microsoft Exchange 2003 to Exchange 2010,
i am done with moving all the mailboxes 300 mailbox almost with a 1.5 TB DB with no issues
when i tried all the processes, procedures, instructions and forums to move the public folder or
to use move all replicas from Exchange 2003 to Exchange 2010 i always get errors , now when i try
to open PF Management console from the exchange 2010 server i get it but it is disconnected
then i can choose to coneect to the new server name EXCHANGE2010 with no issues
when i try to expand the default folder and system folder i get the following error.
OAB is set on the new server as default.
when i try to add replica using power shell i get this error:
WARNING: An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an inst
of an object.
Object reference not set to an instance of an object.
+ CategoryInfo : NotSpecified: (:) [Get-PublicFolder], NullReferenceException
+ FullyQualifiedErrorId : System.NullReferenceException,Microsoft.Exchange.Management.MapiTasks.GetPublicFolder
following error when trying to expand PF on EXCHANGE 2010
Microsoft Corporation
Microsoft® Windows® Operating System
6.0.6000.16386
Unexpected error [0x7653450B] while executing command 'get-publicfolder -getchildren -identity '\' -server 'Exchange2010.ptdubai.com''.
Microsoft.Exchange.Configuration.MonadDataProvider.CommandExecutionException: Unexpected error [0x7653450B] while executing command 'get-publicfolder -getchildren -identity '\' -server 'Exchange2010.ptdubai.com''. ---> System.NullReferenceException: Object
reference not set to an instance of an object.
at Microsoft.Exchange.Configuration.Tasks.MapiTaskHelper.GetMapiPublicFolderDatabasesIdentities(ADSystemConfigurationSession configurationSession, ADObjectId serverId, TaskErrorLoggingDelegate errorHandler)
at Microsoft.Exchange.Configuration.Tasks.MapiTaskHelper.ValidateServerContainsPFDatabase(Server server, ADSystemConfigurationSession scSession, TaskErrorLoggingDelegate errorHandler)
at Microsoft.Exchange.Configuration.Tasks.MapiTaskHelper.ResolvePublicFolderServerAndUserLegacyDNs(ADSystemConfigurationSession scSession, ServerIdParameter serverIdParameter, String& serverLegacyDN, String& userLegacyDN, Fqdn& serverFQDN,
TaskErrorLoggingDelegate errorHandler)
at Microsoft.Exchange.Configuration.Tasks.GetMapiObjectTask`2.CreateSession()
at Microsoft.Exchange.Configuration.Tasks.DataAccessTask`1.InternalStateReset()
at Microsoft.Exchange.Configuration.Tasks.GetTaskBase`1.InternalStateReset()
at Microsoft.Exchange.Management.MapiTasks.GetPublicFolder.InternalStateReset()
at Microsoft.Exchange.Configuration.Tasks.Task.ProcessRecord()
at System.Management.Automation.CommandProcessor.ProcessRecord()
--- End of inner exception stack trace ---
at Microsoft.Exchange.Configuration.MonadDataProvider.MonadPipelineProxy.ClosePipeline(MonadAsyncResult asyncResult)
at Microsoft.Exchange.Configuration.MonadDataProvider.MonadPipelineProxy.InternalEndInvoke(IAsyncResult results)
at Microsoft.PowerShell.HostingTools.PipelineProxyBase.EndInvoke(IAsyncResult results)
at Microsoft.Exchange.Configuration.MonadDataProvider.MonadCommand.EndExecute(MonadAsyncResult asyncResult)
at Microsoft.Exchange.Configuration.MonadDataProvider.MonadDataReader.Close()
at Microsoft.Exchange.Configuration.MonadDataProvider.MonadDataReader.Dispose(Boolean disposing)
at System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataTable[] dataTables, Int32 startRecord, Int32 maxRecords, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataTable dataTable)
at Microsoft.Exchange.Management.SystemManager.DataTableLoader.Fill(RefreshRequestEventArgs e)
at Microsoft.Exchange.Management.SystemManager.DataTableLoader.OnDoRefreshWork(RefreshRequestEventArgs e)
at Microsoft.Exchange.Management.SystemManager.RefreshableComponent.worker_DoWork(Object sender, DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Microsoft.ManagementConsole, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
MMCFxCommon, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
System.Xml, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
System.Drawing, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Microsoft.Exchange.Management.PublicFolders, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Management.SystemManager, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Microsoft.ManagementGUI, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Data.Common, Version=14.0.631.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.ManagementGUI, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Configuration.ObjectModel, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Microsoft.Exchange.Diagnostics, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Microsoft.Exchange.Data.Directory, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.PowerShell.HostingTools, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
System.Drawing.Design, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Microsoft.Exchange.ManagementGUI.resources, Version=14.0.0.0, Culture=en, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Data, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Isam.Interop, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Data.Transport, Version=14.0.631.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.PowerShell.HostingTools, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
BPA.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
BPA.UserInterface, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Interop.adsiis, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Interop.Migbase, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.DKM.Proxy, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.AirSync, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Approval.Applications, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.CabUtility, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Cluster.Replay, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Configuration.RedirectionModule, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Data.ApplicationLogic, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Data.Mapi, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Data.Providers, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Data.Storage, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.EdgeSync.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.EdgeSync.DatacenterProviders, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Extensibility.Internal, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.InfoWorker.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Live.DomainServices, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.MailboxReplicationService.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.MessageSecurity, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.MessagingPolicies.Rules, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Net, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Rpc, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Search.ExSearch, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Search.Native, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.StoreProvider, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Transport.Agent.AntiSpam.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Transport.Agent.SenderId.Core, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Transport, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Transport.Logging.Search, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Transport.Sync.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.UM.UMCommon, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.UM.UmDiagnostics.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Rtc.Collaboration, Version=3.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Rtc.Media, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
MSExchangeLESearchWorker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
System.Management.Automation, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Core.Strings, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Core.Strings.resources, Version=14.0.0.0, Culture=en, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.HelpProvider, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
pspluginwkr, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
System.Management, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
System.DirectoryServices, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
System.Design, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Accessibility, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
MMCEx, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Anonymously Hosted DynamicMethods Assembly, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null
Microsoft.Exchange.Data.Directory.resources, Version=14.0.0.0, Culture=en, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Data.resources, Version=14.0.0.0, Culture=en, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Configuration.ObjectModel.resources, Version=14.0.0.0, Culture=en, PublicKeyToken=31bf3856ad364e35
i will be thankful for any assistant.
PF DB is arounf 90 GB with alot of public folders and sub-folders. around 60 mail PF and too many subfolders.

First and the most important thing you need to do is, upgrade exchange 2010 to SP2 and RU5.
Exchange 2010 RTM support is long gone.
http://www.microsoft.com/en-us/download/details.aspx?id=36768
http://www.microsoft.com/en-us/download/details.aspx?id=41480
Your exchange 2010 is still in stogeage ;)
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

How to get mail from exchange 2003

Similar Messages

Maybe you are looking for