How to get message/rfc822 attachment name by using JavaMail

Hi,
I am fetching incoming mail which has message/rfc822 attachment. i.e: ".msg" (mime message) is attached to this incoming mail. When I try to get name of this message/rfc822 attachment, I am getting null. Body part for this message attachment doesn't contain attachment name? Is this known issue? Is there any solution for this? How to get attached message name?
I am using javax.mail.part.getFileName() for getting bodypart's filename.
Thanks,
Shilpa

This is not unusual. An attached message need not have a filename,
especially if it wasn't stored in a file but rather was just attached to the
new message from within the mailer that composed the new message.
Some mailers will set a filename anyway, but there's no requirement
that they do that.

Similar Messages

A friend gave me an older Nano 3rd generation. Can anyone tell me how to delete what is on there and how to get rid of his name. It does not connect to my itunes. I cannot even find the source or the place to restore it as suggested in the owners manual.

I have a 3rd generation ipod that a friend gave me. I cannot find anything on how to get rid of his name and music on it. This is what the owners manual says:
"Select ipod nano in the soiurce list and click the summary tab" I cannot find the source or the summary tab on itunes. Can any one help me? I would like to delete everything on it and start over but I am afraid I cannot add anything back on it. I know this is detailed and a lot, but I really need help.

Restore
Note: Because Restore erases all of the songs and files on iPod, make sure toback up any files you've saved on the iPod disk. All of your songs, videos, podcasts, audiobooks, and games can be loaded back to your iPod provided that you have them stored in your iTunes Library.
How to restore your iPod:For Windows:
1. Make sure you've reinstalled the latest version of iTunes.
2. Open iTunes, and then connect your iPod to your computer.
3. After a few moments, it will appear in the source list in iTunes. If the iPod's display doesn't show "Connected" or "Do not disconnect" you may need to put the iPod into disk mode to proceed.
4. Select your iPod in the source list and you will see information about it appear in the Summary tab of the main iTunes windows.
5. Click the Restore button. You will be prompted with one or more restore options that may prompt iTunes to automatically download of the latest iPod Software. The 4 possible restore options are:
Restore Option 1: Restore - Restores with same iPod Software version already on iPod.
Restore Option 2: Use Same Version - Restores with same iPod Software version already on iPod even though a newer version is available.
Restore Option 3: Use Newest Version - Restores with the latest iPod Software on your computer.
Restore Option 4: Restore and Update - Restores with the latest iPod Software on your computer.
6. A progress bar will appear on the computer screen indicating that the first stage of the restore process has started. When this stage is completed, iTunes will instruct you to leave iPod connected to your computer to complete restore.
7. During the stage 2 of the restore process, the iPod will show an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remains connected to the computer or iPod Power adapter during this stage. Note: The progress bar may be difficult to see since the backlight on the iPod display may be off.
8. After stage 2 of the restore process is complete and the iPod is connected to the computer, the iTunes Setup Assistant window will appear asking you to name your iPod and choose your syncing preferences similar to when you connected your iPod for the first time.
For Mac:
1. Make sure you've reinstalled the latest version of iTunes.
2. Open iTunes, and then connect your iPod to your computer.
3. After a few moments, it will appear in the source list in iTunes. If the iPod's display doesn't show "Connected" or "Do not disconnect" you may need to put the iPod into disk mode to proceed.
4. Select your iPod in the source list and you will see information about it appear in the Summary tab of the main iTunes windows.
5. Click the Restore button. You will be prompted with one or more restore options that may prompt iTunes to automatically download of the latest iPod Software. The 4 possible restore options are:
Restore Option 1: Restore - Restores with same iPod Software version already on iPod.
Restore Option 2: Use Same Version - Restores with same iPod Software version already on iPod, even though a newer version is available.
Restore Option 3: Use Newest Version - Restores with latest iPod Software version on your computer.
Restore Option 4: Restore and Update - Restores with latest iPod Software version on your computer.
6. A message will appear prompting you to enter an administrator's name and password.
7. A progress bar will appear on the computer screen indicating that the first stage of the restore process has started. When this stage is completed, iTunes will instruct you to leave iPod connected to your computer to complete restore.
8. During the stage 2 of the restore process, the iPod will show an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remains connected to the computer or iPod Power adapter during this stage. Note: The progress bar may be difficult to see since the backlight on the iPod display may be off.
9. After stage 2 of the restore process is complete and the iPod is connected to the computer, the iTunes Setup Assistant window will appear asking you to name your iPod and choose your syncing preferences similar to when you connected your iPod for the first time.
Source:
iPod nano (3rd generation) Troubleshooting Assistant
Message was edited by: michael08081

How to get List Item attachments name without write any custom code or any database query?

Hi,
How to get List Items attachments name without write any custom code or any database query?

You can get it from Rest,
There are 2 options,
1) create a 'Result Source' which has a search query for that List which has attachments
- Use rest query to get the 'Filename' , it will have the attachment file name
For example, if the result source id is : 73e6b573-abf8-4407-9e5f-8a85a4a95159 , then the query will be
http://[site URL]/_api/search/query?querytext='*'&selectproperties='Title,Path,FileExtension,SecondaryFileExtension,Filename'&sourceid='73e6b573-abf8-4407-9e5f-8a85a4a95159'&startrow=0&rowLimit=100
You can refine the query, be giving proper 'querytext'
2) Use the List rest api
For example if your list guid is :38d524a1-e95c-439f-befd-9ede6ecd242e
You can get he attachments for 1st item using this
http://[Site URL]/_api/lists(guid'38d524a1-e95c-439f-befd-9ede6ecd242e')/items(1)/AttachmentFiles
get2pallav
Please click "Propose As Answer" if this post solves your problem or "Vote As Helpful" if this post has been useful to you.

How to get message which don't contain specified header?

Hello
I have a question:
how to get messages which don't contain specified header?
At this moment I have something like this, but it works to long (2 seconds for 15 messages, 2 minutes for 800 messages:/ )
StringTerm st = new StringTerm("Header name") {
    public boolean match(Message arg0) {
        try {
           return arg0.getHeader(pattern) == null;
        } catch (MessagingException ex) {
           return false;
Message[] m = f.search(st);where f is folder
Does exist way easier and more "time-efficient"
regards
Edited by: moj_ekranik on Dec 4, 2009 1:28 AM
Edited by: moj_ekranik on Dec 4, 2009 1:29 AM

Assuming you're using IMAP...
Try this:
folder.search(new NotTerm(new HeaderTerm("header-name", "")));

How to get a parameter without name in JSP?

hi everyone, My question is how to get a parameter without name in JSP? I have two pages, 1.html and 2.jsp.
in 1.html, I embeds some Javascript codes in HTML contents like below ( changed < to ( , > to )):
function toSubWin( obj )
window.open('test.jsp?'+obj.firstChild.toString(),'sw');
(a onClick='toSubWin(this)'style="background:green")focus(/a)
How can I get the parameter in 2.jsp?
THANK YOU IN ADVANCE!!

Does obj.firstChild.toString() evaluate to a "name=value" type of String ?
Or better what does obj.firstChild.toString(),'sw' evaluate to ? It has to end up in a name=value format, else its just gibberish appended to the url.
In the jsp, you have to obviously know the name to get the parameter. There's a getParameterNames() method which returns you a Collection of parameter names as Strings, you could probably use that to retrieve the param values.
Then there's a getParameterMap() method which returns an immutable Map containing parameter names as keys and parameter values as map values. The keys in the parameter map are of type String. The values in the parameter map are of type String array.
However to what ends you employ them in a program which doesnt know its inputs is a different story.
cheers,
ram.

In ME2N report for PO- How to get or add Vendor name in ALV grid output

Hl Everyone
How to get or add Vendor Name and payment terms in the ALV grid output for the follwing reports like ME2N and ME2V.
cuurently i am in 4.7 E version.
Kindly suggest..........
thanks in advance
Regards
Prashanth

Hi Pankaj
I knew that vendor name field is avaiable in ECC versions, but how to get the same field(vendor name) in 4.7 E vesion.
Kindly suggest
Regards
Prashanth

How to get the current schema name

Hi,
Can anybody please tell me how to get the current schema name, there is some inbuilt function for this,but i am not getting that. Please help me.
Thanks
Jogesh

ok folks, I found the answer at Tom's as usual.
http://asktom.oracle.com/tkyte/who_called_me/index.html
I rewrote it into a function for kicks. just pass the results of DBMS_UTILITY.FORMAT_CALL_STACK to this function and you will get back the owner of the code making the call as well some extra goodies like the name of the code and the type of code depending on the parameter. This ignores the AUTHID CURRENT_USER issues which muddles the schemaid. Quick question, does the average user always have access to DBMS_UTILITY.FORMAT_CALL_STACK or does this get locked down on some systems?
cheers,
paul
create or replace
FUNCTION SELF_EXAM (
   p_call_stack VARCHAR2,
   p_type VARCHAR2 DEFAULT 'SCHEMA'
) RETURN VARCHAR2
AS
   str_stack   VARCHAR2(4000);
   int_n       PLS_INTEGER;
   str_line    VARCHAR2(255);
   found_stack BOOLEAN DEFAULT FALSE;
   int_cnt     PLS_INTEGER := 0;
   str_caller VARCHAR2(30);
   str_name    VARCHAR2(30);
   str_owner   VARCHAR2(30);
   str_type    VARCHAR2(30);
BEGIN
   str_stack := p_call_stack;
   -- Loop through each line of the call stack
   LOOP
     int_n := INSTR( str_stack, chr(10) );
     EXIT WHEN int_cnt = 3 OR int_n IS NULL OR int_n = 0;
     -- get the line
     str_line := SUBSTR( str_stack, 1, int_n - 1 );
     -- remove the line from the stack str
     str_stack := substr( str_stack, int_n + 1 );
     IF NOT found_stack
     THEN
        IF str_line like '%handle%number%name%'
        THEN
           found_stack := TRUE;
        END IF;
     ELSE
        int_cnt := int_cnt + 1;
         -- cnt = 1 is ME
         -- cnt = 2 is MY Caller
         -- cnt = 3 is Their Caller
         IF int_cnt = 1
         THEN
            str_line := SUBSTR( str_line, 22 );
            dbms_output.put_line('->' || str_line);
            IF str_line LIKE 'pr%'
            THEN
               int_n := LENGTH('procedure ');
            ELSIF str_line LIKE 'fun%'
            THEN
               int_n := LENGTH('function ');
            ELSIF str_line LIKE 'package body%'
            THEN
               int_n := LENGTH('package body ');
            ELSIF str_line LIKE 'pack%'
            THEN
               int_n := LENGTH('package ');
            ELSIF str_line LIKE 'anonymous%'
            THEN
               int_n := LENGTH('anonymous block ');
            ELSE
               int_n := null;
            END IF;
            IF int_n IS NOT NULL
            THEN
               str_type := LTRIM(RTRIM(UPPER(SUBSTR( str_line, 1, int_n - 1 ))));
             ELSE
               str_type := 'TRIGGER';
             END IF;
             str_line := SUBSTR( str_line, NVL(int_n,1) );
             int_n     := INSTR( str_line, '.' );
             str_owner := LTRIM(RTRIM(SUBSTR( str_line, 1, int_n - 1 )));
             str_name := LTRIM(RTRIM(SUBSTR( str_line, int_n + 1 )));
          END IF;
       END IF;
   END LOOP;
   IF UPPER(p_type) = 'NAME'
   THEN
      RETURN str_name;
   ELSIF UPPER(p_type) = 'SCHEMA.NAME'
   OR    UPPER(p_type) = 'OWNER.NAME'
   THEN
      RETURN str_owner || '.' || str_name;
   ELSIF UPPER(p_type) = 'TYPE'
   THEN
      RETURN str_type;
   ELSE
      RETURN str_owner;
   END IF;
END SELF_EXAM;

How to get the current function name in java

How to get the current function name in java.
In c it is done as
printf("%s",__func__);
Thanx in advance.

j0o wrote:
System.out.println("Class Name: " + new Exception().getStackTrace()[0].getClassName() +
"/n Method Name : " + new Exception().getStackTrace()[0].getMethodName() +
"/n Line number : " + new Exception().getStackTrace()[0].getLineNumber());
I pointed the OP at this approach yesterday in one of his multi-posts. I still have not been given my Dukes!

How to get the jsp page name in jsp?

how to get the jsp page name in jsp? how the jsp get the jsp page name dynamic.
thanks in advance.

Try request.getServletPath()

How to get the actual font name from a font file?

Hi
I have only the font Path I have to get the font name from that path. Any idea how to get the actual font name?
Thanks,

I would ask you these questions:
Why do you need to do this? What are you ultimately trying to accomplish?
Are you really asking about the InDesign SDK?
Do you really need to get the "name" of a font from an arbitrary file? Or do you want information about a font installed on the system? If so, what OS?
Do you need to be able to handle any font format?
Which font "name" do you mean?
What language do you want the name in?
(1) It's not clear what you're trying to accomplish. A bit more information about your ultimate goal would be helpful.
(2) This question is not at all specific to the InDesign SDK. Are you really trying to do something in the context of an InDesign plug-in? If so, you probably want to look at IID_IFONTFAMILY and the IFontFamily::GetFamilyName function.
(3) If you are asking more generally, Windows and Mac both have system API calls to get this information, although those tend to deal with installed system fonts, not with arbitrary font files per se.
Also, you can parse the name table from a True Type or Open Type font without using any system APIs; as True Type and Open Type are well-documented standards. I would start by reading these:
The Naming Table
Font Names Table
(4) Although there are other standards, such as Type 1 (PostScript) fonts, and True Type Collection files and other formats, especially on Mac.
(5) Also, when you start down this road, you will quickly realize that your seemingly simple question is actually ambiguous, and that the answer is kind of complicated, because a font can have many names (a family name, a full font name, a style name, a PostScript name, etc.).
(6) And not only does a font have multiple names, it can have each of those names in multiple languages and encodings.
Any clarification would make this a better question.

How to get list of file names from a directory?

How to get list of file names from a directory?
Please help

In addition, this:
String filename = files;Should be this:
String filename = files;
That's just because he didn't use the "code" tags, so [ i ] made everything following it become italicized.

How can get the console window name of the current form?

How can get the console window name of the current form?

Try the various get methods of the viewObject such as getQuery:
http://www.oracle.com/webapps/online-help/jdeveloper/10.1.2/state/content/navId.4/navSetId._/vtAnchor.getQuery%28%29/vtTopicFile.bc4jjavadoc%7Crt%7Coracle%7Cjbo%7CViewObject%7Ehtml/

How to get messages from IBM MQ in Oracle.

Hi ,
Can you please help me how to get messages from one IBM MQ to another IBM MQ in Oracle.
My requirement is Our upstream is putting messages from their IBM MQ to our IBM MQ
then we have to extract data from the message and load into Oracle database tables
how to implement this in oracle.
Is there any other way to implement this without writing any ORACLE PL/SQL programming.
Please help me.
Thanks.

You might want to use Oracle AQ: Integrating Oracle database applications with WebSphere MQ applications You will need to write some PL/SQL to Dequeue from Oracle AQ and convert the queue payload into insert statements.
If you need help wityh AQ, there is a separate forum: Advanced Queueing

How to get the report server name in Forms 10g.

How to get the report server name in Forms 10g.
I'm using the Application Server 10g 10.1.2.

Hello,
I do not think that you can get this value from anywhere. A solution is to put the Reports server name in an environment variable stored in the /forms/server/default.env file, then to query it at Forms runtime with the TOOL_ENV.Getvar() built-in.
Francois

How to get customer number and name from the SD document

Hi All,
Can you please let me know how to get Customer Number and Name from the SD Document?
Thanks a lot....
Anil

Hi,
It will be displayed in the SD (BIlling document) itself, you clikc on the VF03. The customer name and number will also appear in the SO document also Tcode VA03
regards,
radhika
Edited by: kolipara radhika on Jul 10, 2009 5:32 AM

How to get message/rfc822 attachment name by using JavaMail

Similar Messages

Maybe you are looking for