How to get message status in addapter engine

Hello.
I have a need to return to a client's request, the status of messages
in the adapter engine(i.e. if failed in the jms or jdbc adapters).
I would like to know if there is a STANDART way (i.e. RFC function or
some kind of web service) to perform that?

Yakov,
From my above friends replies, I got to know what u want it. You want to get the status of the comm channel ( Ex: JMS, JDBC , File , etc...) right.
If your SP is SP19(04) or SPS10(04's) then its surely possible for to get the status.
http://help.sap.com/saphelp_nw70/helpdata/en/45/0c86aab4d14dece10000000a11466f/content.htm
oops!! There is weblog describes the above functionality.
/people/william.li/blog/2007/05/04/control-communication-channels-externally-without-using-rwb
I hope it helps you !!!
Best regards,
raj.

Similar Messages

XI message status at Adapter engine level using a table (SAP table)

Hello Experts,
XI message status at Adapter engine level using a table (SAP table).
We want to write a custom report using ABAP so Pls tell why the status u2018Holdingu2019 and u2018To be deliveredu2019 are present in message monitoring of RWB but not in the status (MSGSTATE) field of SXMSPMAST table.
My need is to write a report to get the messages based on the these status from table level.
Please let me know the table name and field name for this and the table name for the desciption of the status of XI messages at Adapter level.
Thanks
Gopesh

Hi Gopesh,
the Adapter Engine Messaging System messages are on the Java schema,
i.e., see the following -
[XI/PI tables|https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/xi+tables]
Regards
Kenny

How to get system status and user status of service order

Hi,
I want to show user status and system status for service order in my report and i am using CRM_ORDER_READ function module to read the status, but it is returning lot of status records, could anyone please suggest how to get the system status and user status for service order.
I did not find any clue for how to get user status, i can see the user status when i open the transaction using CRMD_ORDER.
Regards,
Kamesh Bathla

Hi,
Go to CRM_JEST table give your service order guid and get the status, pass this status into TJ02. You will get the status of your order.
Regards
Srinu

How to get the status of service in rac

Dear all,
how to get the status of service in rac.
SQL> show parameters service;
NAME                                 TYPE        VALUE
service_names                        string      DEVDB, DEVDB1, devdb
[oracle@rac1 ~]$ srvctl status service -d devdb -s devdb
PRKO-2120 : The internal database service devdb cannot be managed with srvctl.

user7244870 wrote:
Dear all,
how to get the status of service in rac.
SQL> show parameters service;
NAME                                 TYPE        VALUE
service_names                        string      DEVDB, DEVDB1, devdb
[oracle@rac1 ~]$ srvctl status service -d devdb -s devdb
PRKO-2120 : The internal database service devdb cannot be managed with srvctl.
Internal services cannot be managed with srvctl utility. Check if you have any user defined service in dba_services
SQL> desc dba_services
Name                                      Null?    Type
SERVICE_ID                                         NUMBER
NAME                                               VARCHAR2(64)
NAME_HASH                                          NUMBER
NETWORK_NAME                                       VARCHAR2(512)
CREATION_DATE                                      DATE
CREATION_DATE_HASH                                 NUMBER
FAILOVER_METHOD                                    VARCHAR2(64)
FAILOVER_TYPE                                      VARCHAR2(64)
FAILOVER_RETRIES                                   NUMBER(10)
FAILOVER_DELAY                                     NUMBER(10)
MIN_CARDINALITY                                    NUMBER
MAX_CARDINALITY                                    NUMBER
GOAL                                               VARCHAR2(12)
DTP                                                VARCHAR2(1)
ENABLED                                            VARCHAR2(3)
AQ_HA_NOTIFICATIONS                                VARCHAR2(3)
CLB_GOAL                                           VARCHAR2(5)http://docs.oracle.com/cd/B19306_01/rac.102/b14197/srvctladmin.htm

How to get Invoice status value in oracle payable

Hi guys,
I am new in oracle apps plz tell me how to get invoice status value of prepayment invoice type in payable.
Navigation ->Payables->Oracle Payables ->Invoices->Inquiry->Invoices ->go to Invoice status block and open to Status LOV
plz provide me sql query to find those status lov values and accounted values for any supplier & invoice num.
it's urgent plz .......................
Thanks guys.......

The invoice approval status does not come from any table / lookup.
Instead, Oracle builds it by calling the ap_invoices_pkg.get_approval_status function.
You can also call it by passing invoice_id, payment_status_flag and invoice_type_lookup_code.
All these 4 columns are present on the ap_invoices_all record.
Hope this helps
Sandeep Gandhi
Independent Consultant

How to get messages from IBM MQ in Oracle.

Hi ,
Can you please help me how to get messages from one IBM MQ to another IBM MQ in Oracle.
My requirement is Our upstream is putting messages from their IBM MQ to our IBM MQ
then we have to extract data from the message and load into Oracle database tables
how to implement this in oracle.
Is there any other way to implement this without writing any ORACLE PL/SQL programming.
Please help me.
Thanks.

You might want to use Oracle AQ: Integrating Oracle database applications with WebSphere MQ applications You will need to write some PL/SQL to Dequeue from Oracle AQ and convert the queue payload into insert statements.
If you need help wityh AQ, there is a separate forum: Advanced Queueing

How to get System status Check Boxes into Query selection screen

Dear experts,
Pleas help in knowing how to get System status Check Boxes into quick view query (SQVI), selectionscreen.
Regards
Jogeswara Rao
Edited by: K Jogeswara Rao on Jul 6, 2010 7:26 PM

Problem solved through other Forum
(Checkboxes not possible, some alternative solution to my requirement found)

How to get system status and user status ?

how to get system status and user status for the given production order?
In which PP table we can
find these?
Thanks&Regards
Satish

Hi Ram,
Use the FM "STATUS_READ" to read both the system and user statuses for an Order.
Alternatively, the following tables store the user and system status info:
JSTO- Status object information
JEST- Individual Object Status
Hope this helps.
Let me know if u need further information.
Regards,
Sonal

How to get invoice status columns available in invoice general screen

Dear All,
How to get invoice status in oracle invoices
Invoice Status --> Validated, Never Validated, Cancelled etc
please advice me.
Thanks
Rehan
Edited by: 877432 on Oct 9, 2012 3:52 AM

for
>
which is not giving this function kindly where i find these status.
>
re-read
>
plz see http://www.shareoracleapps.com/2010/10/api-to-find-ap-invoice-status.html
also Where Is The Invoice Validation Status Stored? How Is The Invoice Validation Status Determined? [ID 301806.1]
>
those notes point about statuses - 'Validated' , 'Never Validated' , 'Needs Revalidation'
if you want 'Unpaid' , 'Fully Applied','Available' etc instead of 'UNPAID', 'FULL', 'AVAILABLE' etc you can use lookups
see note in http://andyblg.wordpress.com/2012/10/09/approval-status-for-invoice-in-r12/

How to get acknowledgement status for PO

Hi!
I would like to write a program which gets the acknowledgement status from IDoc Processing for a given purchase order number.
How can I do that? In which table can I find the link between IDoc and PO? How to get the status?
Thanks in advance
Christian

EDIDS -- table
Check in the below link to update the staus and find the application objectof an idoc
http://www.sapgenie.com/sapedi/idoc_abap.htm#Getting%20IDocs%20linked%20to%20Application%20documents

How to get message which don't contain specified header?

Hello
I have a question:
how to get messages which don't contain specified header?
At this moment I have something like this, but it works to long (2 seconds for 15 messages, 2 minutes for 800 messages:/ )
StringTerm st = new StringTerm("Header name") {
    public boolean match(Message arg0) {
        try {
           return arg0.getHeader(pattern) == null;
        } catch (MessagingException ex) {
           return false;
Message[] m = f.search(st);where f is folder
Does exist way easier and more "time-efficient"
regards
Edited by: moj_ekranik on Dec 4, 2009 1:28 AM
Edited by: moj_ekranik on Dec 4, 2009 1:29 AM

Assuming you're using IMAP...
Try this:
folder.search(new NotTerm(new HeaderTerm("header-name", "")));

How to get Alerts mail for adapter engine errors in SAP PI 7.0

Hi Friends,
I configured Alerts in PI 7.0. with the help of t-code u2018ALRTCATDEF and created a new alert catergory.
In container tab i have mentioned all give below elements.
SXMS_MSG_GUID, SXMS_RULE_NAME, SXMS_ERROR_CAT, SXMS_ERROR_CODE, SXMS_FROM_PARTY, SXMS_FROM_SERVICE, SXMS_FROM_NAMESPACE, SXMS_FROM_INTERFACE, SXMS_TO_PARTY, SXMS_TO_SERVICE, SXMS_TO_NAMESPACE,SXMS_TO_INTERFACE
I am getting alerts when I manually test the alerts configurations by running the report u2018RSALERTTESTu2019.
I am getting mail as :
Alert ID: ##00009##
Dear Administrator,
This is with respect to XI Scenario. During processing of XML file from ECC or XYZ Server, Following error has been occured:
Message ID:
Interface:
NOTE: To check the file name, go to SXMB_MONI and search for above message ID.
Double click on that message ID and click on error in left hand tree.
Please take appropriate action in co-ordination with respective functional and BASIS consultant.
But When I am getting a error , I am not getting an alert mail. Right now iam doing in XI Development.
I am not getting an Alert mail , when my message is in status of : System Error . Error catergory is : XI_J2EE_ADAPTER_JDBC.
Kindly tell how to get alert mail for error catergory : XI_J2EE_ADAPTER_JDBC and in Adapter engine errors.
How to get alert mail when my message is failed with any reason in Adapter engine.
Waiting for quick replay. Please help me out.
Regards,
Ahmed.

Hi thanks for quick reply.
As per your given link : http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/14877. [original link is broken]
I have done all these steps. But still little problem.
as per link he is getting Error description , error message id , alert rule..
In my case I am not getting these information. when my messages failed. When I am doing manully testing the alert getting an mail as :
Alert ID: ##00009##
Dear Administrator,
This is with respect to XI Scenario. During processing of XML file from ECC or XYZ Server, Following error has been occured:
Message ID:
Interface:
NOTE: To check the file name, go to SXMB_MONI and search for above message ID.
Double click on that message ID and click on error in left hand tree.
Please take appropriate action in co-ordination with respective functional and BASIS consultant.
Is it okay the body of mail??.
I am not getting alert mail when my messages failed in adapter engine and Integration Engine.
Ex my message is failed in AE:as below.
My messages flow as : SAP --> XI --> DB.
Messages is success (in ECC moni)> XI moni also success> XI Adapter engine getting error as (Status: System Error) and (Error Category : XI_J2EE_ADAPTER_JDBC).
Regards,
Ahmed.

How to get the status of the backgroud job?

Hi all,
I have a job, there are two steps. I have checked in the table TBTCP, the status is always 'P', which means:job step scheduled, even the step is finished. How can we get the status of every step? Many thanks in advance!

try FM BP_JOB_STATUS_GET
but Table TBTCO(field-status) gives the status of the job i.e whether scheduled,released,active,finished,ready or terminated job.
check following tables
<b>TBTCJSTEP - Background Job Step Overview
TBTCO - Job Status Overview Table
TBTCP - Background Job Step Overview</b>
Message was edited by:
Vasu G

How to get message statistics in a day

Hi, all.
Our env is like the following.
XI 3.0 + SP11 on Windows 2003 + SQL Server.
My question is that how can we get message statistics of XI?
i mean, like the following
Number of messages processed in an hour or a day or month so and so...
If there were no such transaction, what tables should we look into in
order to get this kind of info?
Best Regards.

Hi Sejoon,
sure you can:)
go to RWB (runtime workbench)
and check <b>performance monitoring</b>
you cna get all sorts of message statictics over there
(for a day/hour, size min max, for one interface, a group of interfaces etc.)
Regards,
michal
Message was edited by: Michal Krawczyk

LabVIEW DSC: How to get alarm status from the area?

Colleagues,
I have, lets say, 50 Shared Variables where alarming enabled. Some of these variables assigned to area, so I can get status of the entire area or acknowledge an entire area of alarms (prior to version 8.x there was groups of the tags).
Now I would like to get alarm status from the entire area. How can I do it?
In version 6 I was able to wire tag group to Get Alarm Summary Status. Now, in version 8, Alarm Status.vi can be wired to the array of the variables, but not to area. Is it possible to get all variables from the area?
regards,
Andrey.

I am not sure if I should be posting my problem under this particular topic. I am having trouble understanding acknowledge alarm vi and what this vi is supposed to do is not clear to me yet.
I have around 300 shared variables in my project and I have created a particular vi just to view the alarms that may pop up during runs. I created a main menu and this alarm vi can be accessed upon a button click in the main menu. Users get alarm alert based on sound configuration. Then he can navigate to the alarm vi and acknowledge the alarm. The alarm vi only contains alarm and event display found under DSC module.
The problem is everytime I click the alarm button in the main menu, it takes around 2 minutes for the alarm vi to update which is very annoying and unsatisfactory in the middle of run. I am not sure why it happens and I haven't got any response from support yet. These shared variables are managed under 10 different library files that are set up based on different loops of the process (flow, pressure and so on).
Then I looked into three alarm examples that ship with DSC module. None of these examples use acknowledge alarm vi. I implemented another vi similar to alarm demo vi in that example - containing multicolumn listbox. I created acknowledge event containing acknowledge button and used the acknowledge alarm vi under this event. Read vi alarm is under timeout event.
When I click the acknowledge button as soon as I see the alarm in multicolumn listbox, nothing happens - the color of font does not get changed to purple neither any alarms get acknowledged. I tried to aknowledge alarm by variable name or alarms or alarm area, it does not give me anything. What is this acknowledge alarm supposed to do? I tried to find examples everywhere in the web that uses this particular vi and haven't found one yet.

How to get message status in addapter engine

Similar Messages

Maybe you are looking for