How to get micro sd card to work

how to get micro sd card to work.. my phone says total space 7.40GB for sSD card and that's whats available. I put a micro SD card in but no change?

You put the card in and go to settings and go to storage and scroll down to sd card and click mount ad card

Similar Messages

Sun Ray - How to get external USB Card Reader working

Dear All,
i have the following problem. Maybe someone could help me or give me a clue to solve it.
SunRay Software 5 installed
Window 2003 R2 TerminalServer
Here my question:
I use a kiosk session with a smart card to conncet to the windows server - works perfect.
Login Screen and go.
Now i have to have to authenticate myself with an external usb card reader and smart
card (connected to the sun ray) to use a certain application on my win2003 server.
Via the windows rdp session (from the laptops) everthing is ok. The information from
the card reader is transferred to the server.
If i use the Sun Ray nothing happens. So here is my problem:
How do get the authentication information from the smart card to the server?
Thanks in advance
Best regards
Hans-Peter

Basically, reinstall the Boot Camp video drivers manually and if that doesn't work then go to the AMD/Radeon website and install the Windows drivers directly for your video card model.
If you want to do a search you will find others that have pretty good luck doing it either way.

How to get dual graphics card to work together?

I have an L series satellite with dual graphics card that wont work together. Its an AMD Radeon 3400m apu with an HD 6520G integrated , and a 6400m discrete graphcs card.
The 6400m will never turn on, I have used amd system monitor to see if it is ever used, but it never is.
Even when the 6520g is at full load it wont turn on.
Any suggestions would be helpful.
Thanks.

Hi
As far as I know this theme has been already discussed here in the forum and the switch between internal and external ATI GPU is not supported.
Just the Optimus technology designed by nVidia is supported
So you can switch between Intel GPU and nVidia (if both would support the Optimus technology)

I modified the first business card in a template. Does anyone know how to get the other cards on the template to look like the first one without doing each individually? please and thanks!

I modified the first business card in a template. Does anyone know how to get the other cards on the template to look like the first one without doing each individually? please and thanks!

http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=182&mforum=iworktips ntrick
Peter

How to get Network Interface Cards information ?

hi all,
how to get Network Interface Cards information and tcp window size by java ?

807262 wrote:
how to get Network Interface Cards information Have a look at [url http://download.oracle.com/javase/6/docs/api/java/net/NetworkInterface.html#getNetworkInterfaces%28%29]NetworkInterface.getNetworkInterfaces()
tcp window sizeWhich one?
SO_RCVBUF ^[url http://download.oracle.com/javase/6/docs/api/java/net/Socket.html#getReceiveBufferSize%28%29]Socket.getReceiveBufferSize()^
SO_SNDBUF ^[url http://download.oracle.com/javase/6/docs/api/java/net/Socket.html#getSendBufferSize%28%29]Socket.getSendBufferSize()^

Can't get dedicated graphics card to work.

I can not get the dedicated graphics card to work on my laptop. I spend my night installing and uninstalling drivers, wich none of them seem to work.
To check the card if its working, I dissabled Intel HD Graphics adapter and left the AMD, instead of getting the dedicated card to work I got "Microsoft Basic Display Driver".
Please help me....
EDIT: I only reinstalled AMD drivers, I didn't touched the intel ones since they work.
My laptop: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04089426&tmp_task=prodinfoCategory&cc=us&dlc=en...

HI FXV,
Thank you for your query, I will do my best to assist you.
I understand you have already uninstalled and then downloaded and reinstalled the recommended driver to no avail.
Here is a link to a post by @Paul_Tikkanen that may also help. beta driver. This seems to have solved the issued for someone else.
Have you tried running the HP Support Assistant to aid with updates and resolving issues.
Have you tried Using Automated Troubleshooting (Windows 8) to assist with this difficulty.
You could also try Refresh Your PC to Resolve Problems (Windows 8) to resolve issues.
That last thing I can suggest before referring to HP support is a recovery back to factory. Performing an HP System Recovery (Windows 8)
During the recovery process you will get a prompt to backup your personal files to prevent data loss, if you have not done one recently, I suggest you do one now.
Restoring Files that were Backed Up Using HP Recovery Manager (Windows 8).
If none of the above has resolved the issue then I suggest contacting HP support for assistance. They have the ability to remotely access your system to help locate and resolve issues.
Please call HP technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region HP Technical Support Sitemap.
Please let me know the outcome.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

How to get imac 27 inch to work with asus triple mionitors to work through matro triple head 2 go

how to get imac 27 inch to work with asus triple mionitors to work through matro triple head 2 go

I think I got a little ahead of myself explaining my problem, so let me clarify...
Only the one iMac is having the network file deletion problem, but it is included in the network user logon problem. So 4 out of 5 of the iMacs have had or are having logon problems with network users accounts using mobile accounts on the systems. 2 of the 4 I have wiped and started over on and the other 2 have different network accounts being used by the primary system users. The 5th iMac has not caused any problems except I forgot to mention that the USB on it seems flaky.
So we are apparently full of problems.

HT1459 how to get lost warrenty card for IPOD touch 5

how to get lost warrenty card for IPOD touch 5

Just go to the App Store and download them all again.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

HT201209 how to get itunes gift cards and itunes gifts

i have purched iphone 4s 8gb, but not able to register without itunes gift cards and itunes gifts
Can you help me how to get itunes gift cards and itunes gifts

iTunes Gift Options > http://support.apple.com/kb/HT2736
Note: iTunes Gift Cards are only Valid in Country of Issue

Does anyone know how to get an animated screen saver working

Hi I have a imac desktop not even a year old. Does anyone know how to get an animated screen saver working please. Its a gimp screen saver and is it safe to use on my mac?

Go to the website from where you got the screensaver from and read its system requirements and instructions for installation.

Difficulty getting my network card to work.

Hey there,
I recently converted to arch after the recent kernel update and currently love it. However, even though my network card should be supported, I'm having trouble connecting to any network, whether it be from ethernet or wireless.
I was able to connect to a network through ethernet during the install but not anymore.
I'm rocking a MSI GP60 2PE Leopard using the most up to date version of arch.
[jonathan@j0nbiz-arch ~]$ lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5)
00:1c.3 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 (rev d5)
00:1c.4 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 (rev d5)
00:1c.5 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #6 (rev d5)
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation HM86 Express LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
01:00.0 3D controller: NVIDIA Corporation GM108M [GeForce 840M] (rev a2)
03:00.0 Ethernet controller: Qualcomm Atheros Killer E220x Gigabit Ethernet Controller (rev 13)
04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5249 PCI Express Card Reader (rev 01)
[jonathan@j0nbiz-arch ~]$ ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp3s0: <BROADCAST,MULTICAST> mtu 1500 qdisc fq_codel state DOWN mode DEFAULT group default qlen 1000
link/ether 44:8a:5b:42:a4:86 brd ff:ff:ff:ff:ff:ff
I might be missing a lot of info but this is the first time I'm posting for help.
Any help is appreciated! Thanks in advance.

Welcome to the forums. Please use code tags when posting command output - and see the stickied threads in this subforum and the forum etiquette guide on the wiki.
Your ethernet cards is found by `lspci` and `ip link` - all seems in order there so far. What have you done to try to connect? The simplest test would be the following:
sudo dhcpcd enp3s0
If that works, then all is well and good, see the wiki on how to get connected automatically at start up. If the above command fails, please post the error messages it provides.
For wireless, lspci doesn't even show any wireless hardware - perhaps it is a usb interface for the wireless, what is the output of the following:
dmesg | grep usbcore

How to get input from card reader

hi, everyone,
I have a project, which needs me to get input from card reader. My terminal input is IBM POS system, but it didnot provide the API to get the input. How can I get the input? Need your help so much! and thanks a lot

Now this is a wild idea.... how about searching the IBM site for technical information ?

How to get physical path of current working file?

I WANT TO KNOW THE PHYSICAL PATH OF CURRENT WORKING FILE IN JAVA ON BOTH UNIX AND WINDOWS PLATFORM.
HOW TO GET IT?
THANK U

I am not sure this is the correct way to do it, but I tried it out a bit and found that the following will work (that is, I tested it on NT :-)):
String nameWithPackage = YourClass.class.getName();
String name = (nameWithPackage.substring(nameWithPackage.lastIndexOf(".")+1))+".class";
URL url = YourClass.class.getResource(name);
String path = url.getPath();I hope this will help...

How to get the FTP clients to work?

This is something that (to me at least) should be trivial but I just can't
get it to work at all.
How do you get an FTP client to work?
I've tried several GUI clients as well as the terminal FTP command and they
all seem to get stuck entering passive mode - according to the log entries
they send the command.... And then nothing or a timeout, the following is
from the terminal FTP command:
Titania:~ susan$ ftp ftp.apple.com
Trying 17.254.16.11...
Connected to ftp.apple.com.
220 17.254.16.11 FTP server ready
Name (ftp.apple.com:susan): anonymous
331 Anonymous login ok, send your complete email address as your password.
Password:
230 Anonymous access granted, restrictions apply.
Remote system type is UNIX.
Using binary mode to transfer files.
ftp> ls
501 EPSV: Operation not permitted
227 Entering Passive Mode (17,254,16,11,223,157).
200 PORT command successful
421 Service not available, remote server timed out. Connection closed
ftp>
In my System Preferences -> Network panel in the Proxies tab, I have the
"use Passive FTP mode (PASV) checked.
I also have checked the FTP firewall option (but I think that is only if I'm
acting as an FTP server).
I am connected to the internet via a Netgear wireless router.
I also have an old Windows laptop that also uses the same wireless router
and it can FTP quite happily!!!!!
Any suggestions would be gratefully received.
Susan

ejn - thanks for your continued assistance.
I've tried turning the firewall off but this does not appear to make any difference(*). Also, I have Parallels installed and I'm sharing the internet connection with this (even though Parallels itself is not currently running). Turning this sharing off doesn't seem to change anything either.
I have noticed some entries in the ifpw.log file that coincide with some of the ftp actions. Given the following terminal session:
Titania:~ susan$ ftp ftp.apple.com
Trying 17.254.16.10...
Connected to ftp.apple.com.
220 17.254.16.10 FTP server ready
Name (ftp.apple.com:susan): anonymous
331 Anonymous login ok, send your complete email address as your password.
Password:
230 Anonymous access granted, restrictions apply.
Remote system type is UNIX.
Using binary mode to transfer files.
ftp> ls
501 EPSV: Operation not permitted
227 Entering Passive Mode (17,254,16,10,245,46).
200 PORT command successful
421 Service not available, remote server timed out. Connection closed
ftp>
at the time the "200 PORT command successful" is displayed, the ifpw log starts showing:
Sep 5 09:11:21 Titania ipfw: 12190 Deny TCP 17.254.16.10:20 192.168.0.5:49162 in via en1
Sep 5 09:11:24 Titania ipfw: 12190 Deny TCP 17.254.16.10:20 192.168.0.5:49162 in via en1
Sep 5 09:11:27 Titania ipfw: 12190 Deny TCP 17.254.16.10:20 192.168.0.5:49162 in via en1
Sep 5 09:11:30 Titania ipfw: 12190 Deny TCP 17.254.16.10:20 192.168.0.5:49162 in via en1
Sep 5 09:11:33 Titania ipfw: 12190 Deny TCP 17.254.16.10:20 192.168.0.5:49162 in via en1
Sep 5 09:11:36 Titania ipfw: 12190 Deny TCP 17.254.16.10:20 192.168.0.5:49162 in via en1
Sep 5 09:11:42 Titania ipfw: 12190 Deny TCP 17.254.16.10:20 192.168.0.5:49162 in via en1
which makes sense as the system tries to go for an active transfer.
(*) Actually, while I've been writing this, I've been playing on the terminal as well. I've found the combination of:
1) turning off the firewall
2) starting ftp
3) issuing the 'passive' command to turn off passive mode
4) issuing 'ls' etc. works
Looks like I've not been waiting long enough for the ftp client to get sick of trying the passive transfer and switching to an active one with the firewakk turned off!
Still doesn't answer the question - why does passive mode not work?
Susan

How to get the garbage collector to work?

Hi,
i have i program where i load an image scale it down and save the scaled version in an array. I do this for a whole directory of images.
After every image i set the temporary variable for the loaded image = null and call the function System.gc().
My problem is, that the garbage collector does�nt give the memory of the loaded image free and the used memory of my program grows with every loaded image.
/* Reads all images from a folder an stores them in an Array of images */
     public static BufferedImage[] readScaledImagesFromFolder(String folder,
               int maxSize) {
          File dir = new File(folder);     /* Open the Folder */
          String[] children = dir.list();          /* Get the children of the folder */
          if (children == null) {
             // Either dir does not exist or is not a directory
              System.out.println("No images in the folder!");
              return null;
         } else {
              /* Init array for images */
              BufferedImage[] images = new BufferedImage[children.length];
              int i = 0;
              int index = 0;
              BufferedImage temp;
              String filename, fileending;
             for (i=0; i<children.length; i++) {
                  // Get filename of file or directory
                 filename = children;
     /* Get the fileending of the file */
     fileending = filename.toLowerCase().substring(filename.length()-4);
     if(fileending.equals(".jpg") || fileending.equals(".bmp")
               || fileending.equals(".png") || fileending.equals(".gif"))
          /* Read the image */
          temp = util.ImageUtils.loadBufferedImage(folder+"/"+filename);
          /* Scale the image down and save it in an array */
          images[index] = Util.getScaledImage(temp,maxSize);
          index++;
     temp = null;
     System.gc();
     Mosaic.sourceImageNum = index;
     System.out.println((index+1)+" resized pictures loaded from folder: "+folder);
     return images;
How can i get the gargabe collector to work after every iteration?
I tried to let the Thread.sleep(10) after System.gc() but it does�nt help.
Thank you every much
JackNeil

Hm yes.. i now that System.gc() is only a
suggestion.
But i know what my program is doing and that it
does�nt need the temporary image anymore after i have
a scaled down version. And the temporay image will become unreachable as soon as reading the next one overwrites your temp variable. Setting the variable to null doesn't have much effect.
It would be smarter to load the new image over the
old temporary image and not to expand the heapsize to
maximum.Then look at the possibitly of loading the next image into the same bufferedimage.

How to get micro sd card to work

Similar Messages

Maybe you are looking for