How to get mobileprovision file for air for ios

I have created a small app. I want publish this file as .ipa when i try to publish flash ide asking .moblieprovision file. How can i get this file. Is it require to BUY.

This may have changed with CS6 but in the past you had to purchase an Apple Developer plan for iOS development (they have one for Mac development as well). Check the apple website at http://developer.apple.com .

Similar Messages

How to get .Xap file for windows(8.1) app in visual studio 2013

Hi ,
I am creating an app that supports for windows tablet using visual studio 2013.For windows Phone in bin folder i can see ProjectName.xap file these file can be submitted to store.But I could not see xap file for windows apps in visual stuido.What file
I should use to upload my project to store.
Thanks,
Alok

Additionally, xap extension only for Windows Phone Silverlight also some other Silverlight project.
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to get needed files for a PCI-5124 after a computer upgrade

A LabView program that uses a high-speed digitizer PCI-5124 (software P/N 500783T-00 version 2.8.1) was written under LabView 7. The computer was replaced with a new one with LabView 8.2. We installed the digitizer board in the new computer and installed the NI-SCOPE software. The program no longer works. Upon trying to load it several windows that ask us to "Find the VI Named 'niScope Close.vi'" and similar messages come up. Does this mean we have not loaded everything needed from the CD or is there some other action we need to have taken?

Labview cannot find the file called 'niScope Close.vi' and probably all other associated files that were in the original location (original PC).
Have you installed all the files for the scope card? Does the file exist on the PC? (do a search).
If you find the file, then you can select it when the VI is being loaded.
The file may have been written by someone at (or for) your company, so you may want to copy them from the original PC.
RayR

How to get firmware file for nokia cdma 2280 RH-17...

my phone model no. is 2280 cdma RH-17MA and currently it turns off automatically and sometimes screen goes blank showing some vertical or horizontal lines...when I went to nearest nokia care ..they said its firmware problem and you have update the firmware ...I downloaded firmware update software and installed but dont know how to get the clean firmware as mine is corrupted which is why it has problems?

if you downloaded and installed NSU on your PC, just follow the instruction on how to go about it, if your phone is not being recognized, then perhaps your phone is not supported, i have not seen any CDMA Nokia phones that are being supported by NSU, your local nokia care centre should be able to fix your software problem, albeit i think you have to pay...

How i get a receipt for iOS Developer Program renew

I renew iOS Developer Program on apple website and I got the tax invoice by email. I cannot use tax invoice for clear cash with my company.
How I get a receipt from Apple?

Use your credit card bill.

How to get plugin file for After Effects CC 2014 (just bought creative cloud)

I just bought Creative Cloud, installed it, and then went to the Adobe site to install After Effects, since I couldn't find a way to do this on the CC menu. I have Mac OSx. I downloaded the After Effects CC 2014 app and it installed it onto my desktop. So when I go to applications>adobe there is no After Effects file and no plugins. And in the menu within After Effects there is no listing of the Effects & presets. I tried searching various things like "curves" and nothing showed up except for "contents"......any idea on how to solve this?

If you are telling us that you could not find After Effects in the Creative Cloud app then your system does not meet the minimum system requirements. If you somehow found a disk image and managed to run it and it gave you the option to choose Desktop when installing then you probably don't have a light copy of CC 2014, because it should only be installed using the CC app. Mac OSx tells us nothing. You could be on Lion, or Leopard, or Mountain Lion or even something else.
Tell us more about your system, show us what you get when and if you get AE to launch (sounds like you're looking inside the disk image for an app and it's not there), and give us the exact steps or error messages that you are seeing when you try and launch AE. BTW, plug-ins are only accessible from inside the timeline or the comp window when the App is running.

How to get the drivers for Dell PowerEdge M620 in INF format?

How to get the drivers for Dell PowerEdge M620.
We tried downloading
http://www.dell.com/support/home/us/en/19/product-support/product/poweredge-m620/drivers but they are in exe?
How to get inf files for those?

As Jason pointed out, they can be extracted, I believe this can be done with 7zip also... Or you can just install one M620 from scratch, install the Dell drivers and then use this tool:
http://gallery.technet.microsoft.com/ConfigMgr-Driver-Injector-aae7d17d to grab the drivers in .inf format.

How to get the file size (in bytes) for all files in a directory?

How to get the file size (in bytes) for all files in a directory?
The following code does not work. isFile() does NOT recognize files as files but only as directories. Why?
Furthermore the size is not retrieved correctly.
How do I have to code it otherwise? Is there a way of not converting f-to-string-to-File again but iterate over all file objects instead?
Thank you
Peter
java.io.File f = new java.io.File("D:/todo/");
files = f.list();
for (int i = 0; i < files.length; i++) {
System.out.println("fn=" + files);
if (new File(files[i]).isFile())
     System.out.println("file[" + i + "]=" + files[i] + " size=" + (new File(files[i])).length() ); }

pstein wrote:
...The following code does not work. Work?! It does not even compile! Please consider posting code in the form of an SSCCE in future.
Here is an SSCCE.
import java.io.File;
class ListFiles {
    public static void main(String[] args) {
        java.io.File f = new java.io.File("/media/disk");
        // provides only the file names, not the path/name!
        //String[] files = f.list();
        File[] files = f.listFiles();
        for (int i = 0; i < files.length; i++) {
            System.out.println("fn=" + files);
if (files[i].isFile()) {
System.out.println(
"file[" +
i +
"]=" +
files[i] +
" size=" +
(files[i]).length() );
}Edit 1:
Also, in future, when posting code, code snippets, HTML/XML or input/output, please use the code tags to retain the indentation and formatting.   To do that, select the code and click the CODE button seen on the Plain Text tab of the message posting form. It took me longer to clean up that code and turn it into an SSCCE, than it took to +solve the problem.+
Edited by: AndrewThompson64 on Jul 21, 2009 8:47 AM

How to get built.xml for ear file in jdeveloper?

Hi,
I am using JDeveloper to create EAR file for my ADF Fusion Application. I think Jdeveloper use ant to create EAR file. I know how to get built.xml for my war file.
Can anyone tell how to get that built.xml that create EAR file in Jdeveloper.?

This blog explains:
http://adfhowto.blogspot.com/2011/03/ojdeploy-deploying-adf-application-from.html
Based on the blog, I simply copied an existing project "deploy" target definition and augmented the project's build.xml with a new target "deployApp" that omits the Project parameter to ojdeploy. This causes ojdeploy to build the workspace-level deploy profile instead. I also omitted the output directory parameter (default is app's /deploy folder) and assume that there is only one application deployment profile (i.e. the default for profile parameter is the '*' wildcard). You can augment the build.properties file if you need to get fancier than that.
<target name="deployApp" description="Deploy Complete YourFoo Application"
depends="init">
<taskdef name="ojdeploy"
classname="oracle.jdeveloper.deploy.ant.OJDeployAntTask"
uri="oraclelib:OJDeployAntTask"
classpath="${oracle.jdeveloper.ant.library}"/>
<ora:ojdeploy xmlns:ora="oraclelib:OJDeployAntTask"
executable="${oracle.jdeveloper.ojdeploy.path}"
ora:buildscript="${oracle.jdeveloper.deploy.dir}/ojdeploy-build.xml"
ora:statuslog="${oracle.jdeveloper.deploy.dir}/ojdeploy-statuslog.xml">
<ora:deploy>
<ora:parameter name="workspace"
value="${oracle.jdeveloper.workspace.path}"/>
<ora:parameter name="profile"
value="${oracle.jdeveloper.deploy.profile.name}"/>
<ora:parameter name="nocompile" value="true"/>
</ora:deploy>
</ora:ojdeploy>
</target>

How to get Alerts mail for adapter engine errors in SAP PI 7.0

Hi Friends,
I configured Alerts in PI 7.0. with the help of t-code u2018ALRTCATDEF and created a new alert catergory.
In container tab i have mentioned all give below elements.
SXMS_MSG_GUID, SXMS_RULE_NAME, SXMS_ERROR_CAT, SXMS_ERROR_CODE, SXMS_FROM_PARTY, SXMS_FROM_SERVICE, SXMS_FROM_NAMESPACE, SXMS_FROM_INTERFACE, SXMS_TO_PARTY, SXMS_TO_SERVICE, SXMS_TO_NAMESPACE,SXMS_TO_INTERFACE
I am getting alerts when I manually test the alerts configurations by running the report u2018RSALERTTESTu2019.
I am getting mail as :
Alert ID: ##00009##
Dear Administrator,
This is with respect to XI Scenario. During processing of XML file from ECC or XYZ Server, Following error has been occured:
Message ID:
Interface:
NOTE: To check the file name, go to SXMB_MONI and search for above message ID.
Double click on that message ID and click on error in left hand tree.
Please take appropriate action in co-ordination with respective functional and BASIS consultant.
But When I am getting a error , I am not getting an alert mail. Right now iam doing in XI Development.
I am not getting an Alert mail , when my message is in status of : System Error . Error catergory is : XI_J2EE_ADAPTER_JDBC.
Kindly tell how to get alert mail for error catergory : XI_J2EE_ADAPTER_JDBC and in Adapter engine errors.
How to get alert mail when my message is failed with any reason in Adapter engine.
Waiting for quick replay. Please help me out.
Regards,
Ahmed.

Hi thanks for quick reply.
As per your given link : http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/14877. [original link is broken]
I have done all these steps. But still little problem.
as per link he is getting Error description , error message id , alert rule..
In my case I am not getting these information. when my messages failed. When I am doing manully testing the alert getting an mail as :
Alert ID: ##00009##
Dear Administrator,
This is with respect to XI Scenario. During processing of XML file from ECC or XYZ Server, Following error has been occured:
Message ID:
Interface:
NOTE: To check the file name, go to SXMB_MONI and search for above message ID.
Double click on that message ID and click on error in left hand tree.
Please take appropriate action in co-ordination with respective functional and BASIS consultant.
Is it okay the body of mail??.
I am not getting alert mail when my messages failed in adapter engine and Integration Engine.
Ex my message is failed in AE:as below.
My messages flow as : SAP --> XI --> DB.
Messages is success (in ECC moni)> XI moni also success> XI Adapter engine getting error as (Status: System Error) and (Error Category : XI_J2EE_ADAPTER_JDBC).
Regards,
Ahmed.

How to build ear files for ADF application using Ant task

How to build ear files for ADF applications using Ant. The ojdeploy ant task can not find application-level deployment profiles. I am trying to automated build and release for ADF application.
Any help is highly appreciated.
Thanks
Shiva

Hi Timo
Thanks for your reply.
I have successfully created ear file using ojdeploy on jenkins. however when am trying to auto deploy using WLDeploy ant task am getting the following
error :
weblogic.application.ModuleException: :oracle.mds.config.MDSConfigurationException:MDS-01335: namespace "/oracle/webcenter/quicklinks/scopedMD" mapped to metadata-store-usage "WebCenterFileMetadataStore" but its definition was not found in MDS configuration
Please advise how to handle this.
As am a newbie to ADF, could you please advise if it is possible for the ADF application deployments can be automated for different environments using jenkins due to this MDS dependencies.
Appreciate your help.
Thanks
Shiva

How to get Open Balance for the year and Total Ending Balance?

For a given account, how to get Open Balance for the year (Cumulative Ending Balance) and Total Ending Balance (Cumulative Ending Balance)?
Is there any function module available? or should I read from some tables? Please advice.

Hello Paul,
You could try calling one of the following BAPIs - see which one meets your requirement. They are documented well so shouldn't be a problem finding out the correct one for your requirements.
BAPI_GL_GETGLACCBALANCE
BAPI_GL_GETGLACCCURRENTBALANCE
BAPI_GL_ACC_GETBALANCE
BAPI_GL_ACC_GETCURRENTBALANCE
BAPI_GL_ACC_GETPERIODBALANCES
BAPI_COND_VAL_DECRE_BALANCES
You might have to put in some of your own logic after the BAPI call to get what you want.
Hope this helps,
Cheers,
Sougata.
p.s. Also look at FM FAGL_GET_ACCOUNT_BALANCE
Edited by: Sougata Chatterjee on May 7, 2008 11:47 AM

A^b = n ,How to get the value for a ?

a^b = n ===> n = Math.pow(a,b)
How to get the value for a ?
dose Java have API to get the value for a ?
Thanks for help~~~

a^b = n
=>
a = n^(1/b)
So,
a = Math.pow(n,1.0/b)

How to Get Missing Dates for Each Support Ticket In My Query?

Hello -
I'm really baffled as to how to get missing dates for each support ticket in my query. I did a search for this and found several CTE's however they only provide ways to find missing dates in a date table rather than missing dates for another column
in a table. Let me explain a bit further here -
I have a query which has a list of support tickets for the month of January. Each support ticket is supposed to be updated daily by a support rep, however that isn't happening so the business wants to know for each ticket which dates have NOT been
updated. So, for example, I might have support ticket 44BS which was updated on 2014-01-01, 2014-01-05, 2014-01-07. Each time the ticket is updated a new row is inserted into the table. I need a query which will return the missing dates per
each support ticket.
I should also add that I DO NOT have any sort of admin nor write permissions to the database...none at all. My team has tried and they won't give 'em. So proposing a function or storable solution will not work. I'm stuck with doing everything
in a query.
I'll try and provide some sample data as an example -
CREATE TABLE #Tickets
TicketNo VARCHAR(4)
,DateUpdated DATE
INSERT INTO #Tickets VALUES ('44BS', '2014-01-01')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-05')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-07')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-03')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-09')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-11')
So for ticket 44BS, I need to return the missing dates between January 1st and January 5th, again between January 5th and January 7th. A set-based solution would be best.
I'm sure this is easier than i'm making it. However, after playing around for a couple of hours my head hurts and I need sleep. If anyone can help, you'd be a job-saver :)
Thanks!!

CREATE TABLE #Tickets (
TicketNo VARCHAR(4)
,DateUpdated DATETIME
GO
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-01'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-05'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-07'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-03'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-09'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-11'
GO
GO
SELECT *
FROM #Tickets
GO
GO
CREATE TABLE #tempDist (
NRow INT
,TicketNo VARCHAR(4)
,MinDate DATETIME
,MaxDate DATETIME
GO
CREATE TABLE #tempUnUserdDate (
TicketNo VARCHAR(4)
,MissDate DATETIME
GO
INSERT INTO #tempDist
SELECT Row_Number() OVER (
ORDER BY TicketNo
) AS NROw
,TicketNo
,Min(DateUpdated) AS MinDate
,MAx(DateUpdated) AS MaxDate
FROM #Tickets
GROUP BY TicketNo
SELECT *
FROM #tempDist
GO
-- Get the number of rows in the looping table
DECLARE @RowCount INT
SET @RowCount = (
SELECT COUNT(TicketNo)
FROM #tempDist
-- Declare an iterator
DECLARE @I INT
-- Initialize the iterator
SET @I = 1
-- Loop through the rows of a table @myTable
WHILE (@I <= @RowCount)
BEGIN
-- Declare variables to hold the data which we get after looping each record
DECLARE @MyDate DATETIME
DECLARE @TicketNo VARCHAR(50)
,@MinDate DATETIME
,@MaxDate DATETIME
-- Get the data from table and set to variables
SELECT @TicketNo = TicketNo
,@MinDate = MinDate
,@MaxDate = MaxDate
FROM #tempDist
WHERE NRow = @I
SET @MyDate = @MinDate
WHILE @MaxDate > @MyDate
BEGIN
IF NOT EXISTS (
SELECT *
FROM #Tickets
WHERE TicketNo = @TicketNo
AND DateUpdated = @MyDate
BEGIN
INSERT INTO #tempUnUserdDate
VALUES (
@TicketNo
,@MyDate
END
SET @MyDate = dateadd(d, 1, @MyDate)
END
SET @I = @I + 1
END
GO
SELECT *
FROM #tempUnUserdDate
GO
GO
DROP TABLE #tickets
GO
DROP TABLE #tempDist
GO
DROP TABLE #tempUnUserdDate
Thanks,
Shridhar J Joshi
<If the post was helpful mark as 'Helpful' and if the post answered your query, mark as 'Answered'>

How to get the date for the first monday of each month

Dear Members,
How to get the date for the first monday of each month.
I have written the following code
SELECT decode (to_char(trunc(sysdate+30 ,'MM'),'DAY'),'MONDAY ',trunc(sysdate+30 ,'MM'),NEXT_DAY(trunc(sysdate+30 ,'MM'), 'MON')) FROM DUAL
But it look bith complex.
Abhishek
Edited by: 9999999 on Mar 8, 2013 4:30 AM

Use IW format - it will make solution NLS independent. And all you need is truncate 7<sup>th</sup> day of each month using IW:
select sysdate current_date,
        trunc(trunc(sysdate,'mm') + 6,'iw') first_monday_the_month
from dual
CURRENT_D FIRST_MON
08-MAR-13 04-MAR-13
SQL> Below is list of first monday of the month for this year:
with t as(
          select add_months(date '2013-1-1',level-1) dt
            from dual
            connect by level <= 12
select dt first_of_the_month,
        trunc(dt + 6,'iw') first_monday_the_month
from t
FIRST_OF_ FIRST_MON
01-JAN-13 07-JAN-13
01-FEB-13 04-FEB-13
01-MAR-13 04-MAR-13
01-APR-13 01-APR-13
01-MAY-13 06-MAY-13
01-JUN-13 03-JUN-13
01-JUL-13 01-JUL-13
01-AUG-13 05-AUG-13
01-SEP-13 02-SEP-13
01-OCT-13 07-OCT-13
01-NOV-13 04-NOV-13
FIRST_OF_ FIRST_MON
01-DEC-13 02-DEC-13
12 rows selected.
SQL> SY.

How to get mobileprovision file for air for ios

Similar Messages

Maybe you are looking for