How to get more column space in CR XI

Hi All,
What do i need to do in order to increase the work space in Crystal. My report has around 80 columns that needs to be fitted in one page.
With my current settings I have MO Live Meeting document writer as a default printer but it can accomodate only 36" (width) of work space , that is about 50 columns.
Pls let me know how can i increase the work space to have those 80 columns.
Thanks

Here is what I do when I need to do an extremely wide report (for a data extract for example...)
#1) Go to Control Panel > Printer and Faxes
#2) File > Server Properties
#3) Place a check in the "Create a new form" box and enter a name for new page size.
#4) In the lower section... "Form description (measurements)" set the width & height properties to whatever you need. (200in X 200in seems to be the max that virtual printers will knowledge.)
I have a 200 X 200 that works with the Microsoft XPS Document Writer and Acrobat.
HTH,
Jason

Similar Messages

How to get more disk space

I exported a project out of FCP 7 as a Quicktime movie. I wanted to import it into FCP X to do some color correction and add some graphics, etc. Before exporting out of 7 we had to delete some unused clips to free up about 60 Gig of space on the hard drive because we were getting "Out of disc space." The export went fine, but now as we try to import into FCP X we are suddenly out of disc space again and the movie won't import. Any suggestions to free up disc space in X so we can import the file? We are working on an iMac with a huge hard drive. It's only about 15 months old (the iMac).

Most of what is eating up your hard drive are render files. Every time you make a change in your storyline, more render files are created. Plus, FCPX has almost unlimited undo, so... it accumulates render files.
You can delete unused render files at any time by selecting a project and selecting File > Delete Project Render Files, or in newer versions of FCPX, you can select an event (or with the currently active event) and select File > Delete Event Render Files.
You can select the All Render Files option for projects that have been completed (or currently on hold.)
You can control the accumulation of render files by going into Preferences > Playback > Rendering and turning off Background Render. Use Control-R to render current selections, or Control-Shift-R to render all manually.

Please for referral information, how can I get more disk space, or actually information and guidelines that can have enough free disk space. How, I have to delete documents or downloading to another drive.

Please for referral information, how can I get more disk space, or actually information and guidelines that can have enough free disk space. How, I have to delete documents or downloading to another drive. (The problem is that Safari could not download the file "iTunesSetup.exe" because there is not enough free disk space.Try deleting documents or downloading to another drive) ... Perhaps this is the main problem why can not open iTunes and inscription is: the folder "iTunes" can not be found or created, and is required. The default location for this folder is inside the "Music" folder. - And after options ok, appears option: Choose iTunes Library with inscription iTunes needs a library to continue. You may choose an existing iTunes library or create a new one - but still following options Choose Library and the following options can not open iTunes ... Please for instructions on how to eliminate the problem or eror ...
Mac is running OS X v10.6.8, Safari should be 5.1.10. Or Mac OS X / Version 10.6.8 / Build 10K549 / Serial Number W8****ATM / Processor 2.4 GHz Intel Core 2 Duo / Memory 4 GB 1067 MHz DDR3 or More Info:
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2,4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1,07 GHz
Boot ROM Version: MBP71.0039.B0B
SMC Version (system): 1.62f7
Serial Number (system): W80394HFATM
Hardware UUID: 94647506-C5D0-5D73-BC7F-FC680D238F43
Sudden Motion Sensor:
State: Enabled
<Personsl Information Edited by Host>

buy an external HD 1TB for $60
NO notebook is a mass storage device, so dont try to turn it into one, it doesnt work that way.
Unless youre using it every couple weeks, its static data and should be on an external HD
In the case of a Macbook Air or Macbook Pro Retina with ‘limited’ storage on the SSD, this distinction becomes more important in that in an ever rapidly increasing file-size world, you keep vital large media files, pics, video, PDF collections, music off your SSD and archived on external storage, for sake of the necessary room for your system to have free space to operate, store future applications and general workspace. You should never be put in the position of considering “deleting things” on your macbook SSD in order to ‘make space’.
Professionals who create and import very large amounts of data have almost no change in the available space on their computers internal HD because they are constantly archiving data to arrays of external or networked HD.
Or in the case of the consumer this means you keep folders for large imported or created data and you ritually offload and archive this data for safekeeping, not only to safeguard the data in case your macbook has a HD crash, or gets stolen, but importantly in keeping the ‘breathing room’ open for your computer to operate, expand, create files, add applications, for your APPS to create temp files, and for general operation.

How to get more space on my disk in iphoto? It says I don't have any more space..Help!

How to get more space in iphoto? It says I don't have any more space?? Help...

You can look at the material stored and see what you don't need and delete. But a better way is to get an external hard drive and move large quantities of material to the external storage. That will free up internal storage capacity.

I got my first macbook air about a year ago. awhile ago i started getting these notifications saying "your startup disk is almost full" or "your startup disk is full". i was wondering how to get more space on my startup disk, if that is possible?

i got my first macbook air about a year ago. awhile ago i started getting these notifications saying "your startup disk is almost full" or "your startup disk is full". i was wondering how to get more space on my startup disk, if that is possible?

Freeing Up Space on The Hard Drive
1. See Lion's Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.

DATA TRANSFER - How to get a SINGLE SPACE in downloaded txt file from UNIX?

Hi Experts,
Am sending data from SAP to UNIX/ Application server and text file on desk top as well.
So, I am keeping a single character just SPACE at the END of each record.
Then, When I see the downloaded text file, I found a SINGLE SPACE at the end of each record, fine.
Then, by using CG3Y t code, I downloaded the UNIX file to my desk top.
But, When I see this UNIX downloaded file from UNIX, I did NOT find any SPACE at the end of each record!!!
Am doing every thing same in both cases.
So,
1 - Why its happening in case of UNIX file?
2 - How to get a SINGLE SPACE at the END in the downloaded file from UNIX?
thanq

Its there, I am talking abut this -
OPEN DATASET - linefeed
Syntax
... WITH { NATIVE
         | SMART
         | UNIX
         | WINDOWS } LINEFEED ... .
Alternatives:
1. ... WITH NATIVE LINEFEED
2. ... WITH SMART LINEFEED
3. ... WITH UNIX LINEFEED
4. ... WITH WINDOWS LINEFEED
Effect
: These additions determine which line end marker is used for text files or legacy text files. If these additions are used, the profile parameter abap/NTfmode is ignored. Simultaneous specification of the values "UNIX" or "NT" in the addition TYPE is not permitted.
If these additions are not used, the line end marker is determined as follows, depending on the operating system of the current application server:
The line end marker for Unix is "LF". Under Unix, OS390 and OS400, only "LF" is used for reading and writing.
The line end marker for MS Windows is "CRLF". Under MS Windows, however, the values of the profile parameter abap/NTfmode can also be used to set whether new files are handled according to Unix conventions or Windows conventions. If the profile parameter has the value "b", the Unix line end marker "LF" is used. If the profile parameter has the value "t" or is initial, the Windows line end marker "CRLF" is used. The setting using the profile parameter can be overridden with the addition TYPE and the value "UNIX" or "NT". If an existing file is opened without the addition TYPE, this is searched for the first line end marker ("LF" or "CRLF"), and this is used for the whole file. If no line end marker is found, the profile parameter is used. This applies particularly if an existing file is completely overwritten with FOR OUTPUT.
If an addition WITH NATIVE|SMART|UNIX|WINDOWS LINEFEED is used, this setting can be changed for the open file using the statement SET DATASET. If neither of the additions is used, the line end marker also cannot be changed using SET DATASET.
Notes
: Without the use of an addition WITH LINEFEED, the line end marker is dependent on diverse implicit factors such as the operating system of the application server, a profile parameter, and line end markings that are already used. For this reason, the explicit use of WITH LINEFEED is recommended, which renders the use of the addition TYPE for setting the line end marker obsolete.
The line end marker that is currently used can be determined for every open file using GET DATASET.
Alternative 1
... WITH NATIVE LINEFEED
Effect
: This addition defines the line end marker independently of the access type according to the operating system of the application server, i.e. "LF" for Unix OS390 or OS400, and "CRLF" for MS Windows.
The line end marker is interpreted according to the current codepage. If a code page is explicitly specified using the addition CODE PAGE, the characters of the line end marker must exist be available or be written in accordance with this code page.
Note
: The addition WITH NATIVE LINEFEED is intended for editing files on an application server that can also be accessed by other means. The addition receives the appropriate line end marker without the program needing to know the operating system.
Alternative 2
... WITH SMART LINEFEED
Effect
: This addition depends on the access type:
In files that are opened for reading using FOR INPUT, both "LF" and "CRLF are interpreted as a line end marker. When opening an EBCDIC file with the addition CODEPAGE, in addition to "LF", "CRLF", and the EBCDIC character strings, the corresponding ASCII character strings are also recognized. In addition, the EBCDIC character "NL" (line separator) is also interpreted as a line end marker.
In files opened for appending or changing with FOR APPENDING or FOR UPDATE, the program searches for a line end marker that is already used in the file. In this process, first the end of the file is identified. If no line end marker is found there, a certain number of characters at the beginning is analyzed. If a line end marker is found, this is used when writing to the file. This is also affected by the addition CODE PAGE. For example, ASCII line end markers are recognized and used in a file opened with EBCDIC, but not the other way round. If no line end marker is found or no search is possible (for example, if the file is opened with the addition FILTER), the line end marker is determined according to the operating system of the application server, as with the addition WITH NATIVE LINEFEED.
In files opened for writing using FOR OUTPUT, the line end marker is determined according the operating system of the application server, as with the addition WITH NATIVE LINEFEED.
Note
: The addition WITH SMART LINEFEED is intended for the generic editing of files in heterogeneous environments. The line end marker is recognized and set for different formats. The use of this addition is the best solution for most application cases.
Alternative 3
... WITH UNIX LINEFEED
Effect
: The line end marker is set to "LF" regardless of the access type and operating system of the application server.
The line end marker is interpreted according to the current code page. If a code page is specified explicitly using the addition CODE PAGE, the characters of the line end marker must be available or be written according to this code page.
Note
: The addition WITH UNIX LINEFEED is intended for editing Unix files in which the specific line end markers are to be retained, even if the operating system of the current application server is MS Windows.
Alternative 4
... WITH WINDOWS LINEFEED
Effect
: The line end marker is set to "CRLF" regardless of the access type and operating system of the application server.
The line end marker is interpreted according to the current code page. If a code page is specified explicitly using the addition CODE PAGE, the characters of the line end marker must be available and be written according to this code page.
Note
: The addition WITH WINDOWS LINEFEED is intended for use with MS Windows files in which the specific line end marker is to be retained, even if the operating system of the current application server is Unix, OS390 or OS400.

DATA TRANSFER - How to get a SINGLE SPACE in the downloaded file from UNIX?

Hi Experts,
Am sending data from SAP to UNIX/ Application server and text file on desk top as well.
So, I am keeping a single character just SPACE at the END of each record.
Then, When I see the downloaded text file, I found a SINGLE SPACE at the end of each record, fine.
Then, by using CG3Y t code, I downloaded the UNIX file to my desk top.
But, When I see this UNIX downloaded file from UNIX, I did NOT find any SPACE at the end of each record!!!
Am doing every thing same in both cases.
So,
1 - Why its happening in case of UNIX file?
2 - How to get a SINGLE SPACE at the END in the downloaded file from UNIX?
thanq

Hi,
I don't know if this works:
perform SET_TRAIL_BLANKS(saplgrap) using 'X'.
perform SET_FIXLEN(saplgrap) using '0' '060'. "put length of your line from-to
... download ...
It will put space at the end of your line, according to the length.
Hope it works,
Chang

How to get summary columns in delimited text file

How to get summary columns in delimited text file
I am trying to generate a delimited text file output with delimited_hdr = no.The report is a Group above report with summary columns at the bottom.In the text file the headers are not getting repeated & thats ok.The problem is the summary data is getting repeated for each row of data.Is there a way where i will get all the data & summary data will get displayed only once.I have to import the delimited text file in excel spreadsheet.

Sorry there were a typos :
When I used desformat=DELIMITEDDATA with desttype=FILE, I get error "unknown printer driver DELIMITEDDATA". When you look for help, DELIMITED is not even listed as one of the values for DESTFORMAT. But if you scroll down and look for DELIMITER it says , this works only in conjuction with DESTFORMAT=DELIMITED !!!!!!??!! This is in 9i.
Has this thing worked for anybody ? Can anyone please tell if they were able to suppress the sumary columns or the parent columns of a master-detail data for that matter ?

How to get the column index inside a dataTable

Hello,
before I get staked, there are multiple threads handling familiar topics to the one I'm questioning about but none gives an anwer. If there is one, I'm propably to less skilled to see it.
So here is my Problem: I've build a web-interface to a time-recording system. The hours worked on a certain project are displayed in a dataTable component which is generated out of a mySQL Query. Each entry (column/row) contains a inputText component to display and edit the specific value.
Editing one of these inputText elements now fires a valueChangeEvent which reads the new value and stores it in the database. For that cause I need to know the row- and column-index of the inputText component that fired the event.
Using the getClientId method from the valueChangeEvent I get some Information which makes it possible to calculate the row/column index. A typical clientID looks like "form_table:mainTable:0:_id14". "form_table" is the ID of the form the dataTable is in. "mainTable" is the id of the dataTable component. "0" is the row the component is in. And finally "_id14" stands for the id randomly given to the inputText component by JSF.
My Problem is now, that though I can calculate the column out of the[i] "_id14", this calculation is hardcoded. So everytime I add a component in before the dataTable, the calculation needs to be adjusted in the code.
The Questions:
- How to force a sensefull id indicating a column-index for the inputText components inside the columns of a dataTable?
- Nicer since no workaround: How to get the column-index inside the dataTable on a natural way? (e.g. out of the valueChangeEvent the specific inputText component fires)
After some investigation here on the board and on the net I know multiple ways to get the row index, (Things like component-binding and so on) but I can't find a answer on how to get the column-index.
Thanks to all answers and/or links to things my eyes missed while searching for one.

...then index 0 becomes index 1 and my program doesn't work properlyThe program works properly, just not as you expect it to.
As you've noticed the table gives you the flexibility to move columns around. So if you move column 0 to column 1, why would you expect to still use 0 as the index? The table manages the reordering of columns for you to make sure the data being displayed in each table column comes from the correct column in the data model.
You can manage this yourself using one of the following methods (I forget which one):
table.convertColumnIndexToModel(int viewColumnIndex)
table.convertColumnIndexToView(int modelColumnIndex)
Or, you can get data from the data model directly:
table.getModel().getValueAt(row, 0);

How to get the column names of the table into the Dashboard prompt

how to get the column names of the table into the Dashboard prompt
Thanks & Regards
Kishore P

Hey john,
My requirement is as follows
I have created a Rank for Total sales by Region wise i.e RANK(SUM(Dollars By Region)) in a pivot table.
My pivot table looks like this
COLUMN SELECTOR: TOTAL US , REGION , DISTRICT , MARKET
---------------------------------------------------- JAN 2009          FEB 2009        MAR 2009
RANK              REGION                  DOLLARS           DOLLARS        DOLLARS DOLLARS
1 CENTRAL 10 20 30 40
2 SOUTHERN 10 30 30 70
3 EASTERN 20 20 20 60
4 WESTERN 10 20 30 40
When i select the District in column selector
Report has to display rank based on Total Sales by District. i.e
------------------------------------------------- JAN 2009         FEB 2009       MAR 2009
RANK             DISTRICT              DOLLARS           DOLLARS        DOLLARS DOLLARS
for this i need to change the fx of rank i.e RANK(SUM(Dollars By Region)) to RANK(SUM(Dollars By District)) and fx of Region i.e Markets.Region to Markets.District dynamically.
so , i need to capture column name of the value selected from the column selector and dynamically i need to update the fx 0f RANK & fx of region.
do you have any solution for this?
http://rapidshare.com/files/402337112/Presentation1.jpg.html
Thanks & Regards
Edited by: Kishore P on Jun 24, 2010 7:24 PM
Edited by: Kishore P on Jun 24, 2010 7:28 PM

How to get more features for Captivate 6

Hi all,
I've installed Captivate 6 on my laptop at work, I use it for creating training material for our project management system. I was just looking at some Adobe video tutorial and there are some features shown in the videos that I can't find on my captivate (for example Drag and Drop interaction, some particular widget like "Hangman" etc...). I tried to download them, clicking on the "Download more interactions" but there are any available. So, is there a way to get those features, at least those shown in your video tutorial for Captivate 6?
Thank you very much
Elena

Hello,
thank you for your answer.
I have the version 6.0, so maybe I can't get those features because of the version that I have.
Even if I click on "Download more" on the Interactions window, there are no Interactions available, but is it a problem related to my version or it's because there aren't available new features?
Thank you very much,
Elena Bettarini
Date: Thu, 14 Nov 2013 00:40:11 -0800
From: [email protected]
To: [email protected]
Subject: How to get more features for Captivate 6
    Re: How to get more features for Captivate 6
    created by Lilybiri in Adobe Captivate - View the full discussion
Hello and welcome,
I cannot remember for the Hangman interaction anymore, but Drag&Drop was only available for subscription users, for version 6.1.0.3190 Maybe it was not clear in the video you are pointing at, that not all features were available for box licenses. Which version do you have?
Lilybiri
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5841167#5841167
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5841167#5841167
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5841167#5841167. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Adobe Captivate at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

How to get more than 256 bytes data

hello.
I use Schlumberger 32K Card�iJava Card 2.1�j.
Please tell me how to get more than 256 bytes data from the applet in the card!!
According to JCRE specification, need to use Get Response Command.
What is Get Response command?
Do I have to write processing of Get Response command to an applet?
Or JCRE processes Get Response command?
If knows, please tell me about!!
Thanks.

Thanks for your response!!
I understand that I have to write processing of Get Response command to an applet.
But case of Schlumberger 32K card, when host send Get Response command to an applet, card reply 6F-00!?
I'm investigating now, and it seems that response is returned before applet processes Get Response command(CLA = 00, INS = C0).
Do JCRE perform the process of Get Response command?

How to add more disk space into /   root file system

Hi All,
Linux 2.6.18-128
can anyone please let us know how to add more disk space into "/" root file system.
i have added new hard disk with space of 20GB,
[root@rac2 shm]# df -h
Filesystem            Size Used Avail Use% Mounted on
/dev/hda1             965M 767M 149M 84% /
/dev/hda7             1.9G 234M 1.6G 13% /var
/dev/hda6             2.9G   69M 2.7G   3% /tmp
/dev/hda3             7.6G 4.2G 3.0G 59% /usr
/dev/hda2              18G   12G 4.8G 71% /u01
LABLE=/               2.0G     0 2.0G   0% /dev/shm
/dev/hdb2             8.9G 149M 8.3G   2% /vm
[root@rac2 shm]#

Dude! wrote:
I would actually question whether or not more disks increase the risk of a disk failure. One disk can break as likely as one of two of more disks.
Simple stats. Buying 2 lottery tickets instead of one, gives you 2 chances to win the lottery prize. Not 1. Even though the odds of winning per ticket remains unchanged.
2 disks buy you 2 tickets in The-Drive-Failure lottery.
Back in the 90's, BT (British Telecom) had a 80+ node OPS cluster build with Pyramid MPP hardware. They had a dedicated store of scsi disks for replacing failed disks - as there were disk failure fairly often due to the number of disks. (a Pryamid MPP chassis looked like a Xmas tree with all the scsi drive LEDs, and BT had several)
In my experience - one should rather expect a drive failure sooner, than later. And have some kind of contingency plan in place to recover from the failure.
The use of symbolic links instead of striping the filesystem protects from the complete loss of the enchilada if a volume member fails, but it does not reduce the risk of loosing data.
I would rather buy a single ticket for the drive failure lottery for a root drive, than 2 tickets in this case. And using symbolic links to "offload" non-critical files to the 2nd drive means that its lottery ticket prize is not a non-bootable server due to a toasted root drive.

How to get last column used in report sorting?

hi,
how to get last column used in report sorting?
simon

How to identifiy which column was sorted having different reports on page?
just use:
'YOUR_STATIC_REGION_NAME' instead of p_static_id,
:APP_ID for p_app_id,
:APP_PAGE_ID for p_page_id
:APP_USER_ID for p_app_user.
and dont forget to grant SELECT on #OWNER# to APEX_030200.WWV_FLOW_PREFERENCES$
good luck and thank you Juergen.Schuster
Simon

Hi. I am planning a valentines day party for 7 people, I used the "Event Card" format on pages. It only gave me two cards, I do not know how to get more cards. Thanks!

Hi. I am planning a valentines day party for 7 people, I used the "Event Card" format on pages. It only gave me two cards, I do not know how to get more cards. Thanks!

Newest compared to what?
There is a reason we don't say use the "latest" or "best" methods to complete tasks, because they are vague ill defined terms.
Could you return us the favor and tell us exactly what version of Pages on what version of OSX.
The answer varies.
Peter

How to get more column space in CR XI

Similar Messages

Maybe you are looking for