How to get more then 2 Appearance options for the overall look and fell?

How can this be possible instead of either Aqua or Gray?

MobileDev wrote:
"Apple’s Limited Warranty for iPhone excludes coverage for damage resulting from accident, unauthorized service and unauthorized modifications."
Apple's iPhone Warranty is referring to hardware modifications, because it is just a hardware warranty. It explicitly denies covering software, even to the point of saying even the iPhone OS is not covered by any warranty.
When you update the iPhone software to 1.1.1 or later you'll see this message
"Apple has discovered that some of the unauthorized unlocking programs available on the Internet may cause irreparable damage to the iPhone's software. IF YOU HAVE MODIFIED YOUR iPHONE'S SOFTWARE, APPLYING THIS SOFTWARE UPDATE MAY RESULT IN YOUR iPHONE BECOMING PERMANENTLY INOPERABLE. Making unauthorized modifications to the software on your iPhone violates the iPhone software license agreement, and the inability to use your iPhone due to unauthorized software modifications is not covered under your iPhone's warranty."
Jason

Similar Messages

How to get same order of appearance of photos in Iphoto album and album shown to IOS devices after sharing?

How to get same order of appearance of photos in Iphoto album and album shown to IOS devices after sharing?

Hello Leonie!
I use Iphoto sharing with my family on their ios devises. And it works.
The only problem is that, now, I try to organize the photos in a meaningful way (not chronologically) before Iphoto Sharing (Icloud)
But on the ios devices the photos is arranged chronologically.
Is there a solution?
MBP 2009
Iphoto 9.5.1
IPAD 3
7.1.1
best regards Joakim

How to call more then one Function modules at the same time

HI ,
How to call more then one FM at the same time .
Modertor Message: Interview-type Questions are not allowed.
Edited by: kishan P on Jan 2, 2012 2:22 PM

They are a few different models of the MacBook Pro ranging from 15.4" i7's to 17" i7's. I would use the same models together though when imaging them just like I do with PC's. For example I would Ghost 5 Lenovo T420 Thinkpads at the same time which all share the same exact specs and config. Looking to do the same with the MBP. I have .dmg image of OSX 10.8.1 on a firewire drive which I'm using. I image all my MBP's with this drive, the only downside is I have to do each MBP one at a time.
Thanks

How to get more then the 17 functions

hi there heres one for you all. is it possable to get more little functions on the iphone i.e more buttons?????? i have seen in a shop why i brought my iphone from, a customer showed me his and he had 2 and a half pages full of things, i recon this is illagal?? or does apple after some time allow you to down load new buttons to your iphone? after becoming a good customer?

MobileDev wrote:
"Apple’s Limited Warranty for iPhone excludes coverage for damage resulting from accident, unauthorized service and unauthorized modifications."
Apple's iPhone Warranty is referring to hardware modifications, because it is just a hardware warranty. It explicitly denies covering software, even to the point of saying even the iPhone OS is not covered by any warranty.
When you update the iPhone software to 1.1.1 or later you'll see this message
"Apple has discovered that some of the unauthorized unlocking programs available on the Internet may cause irreparable damage to the iPhone's software. IF YOU HAVE MODIFIED YOUR iPHONE'S SOFTWARE, APPLYING THIS SOFTWARE UPDATE MAY RESULT IN YOUR iPHONE BECOMING PERMANENTLY INOPERABLE. Making unauthorized modifications to the software on your iPhone violates the iPhone software license agreement, and the inability to use your iPhone due to unauthorized software modifications is not covered under your iPhone's warranty."
Jason

How do I change header/footer print options for font, font size, and color?

I know how to change the text for web page print of footers/headers. I can see no option to change font, font color, or font size (such as available on IE). I want to change the font, font color and font size of the footer/header when I print a web page. I read the FAQs, found nothing that seems to fit. Can you assist? or is this option available on Mozilla. I have the latest/greatest version (set to auto update).

OK, my question was about how to change font/color in headers/footers... This suggestion changes the font/color in the text, but NOT in the footers, unless I want everything in the same font/color. I need footers/headers in RED BOLD. I can do this on IE, but there does not seem to be an option for Mozilla.

HT204389 How to get siri on iPad 3 gen to the latest update and it still won't pull up even in settings what can i do

How to pull up siri when I have have a 3rd gen iPad and have the60.1 iOS update and siri won't pull up in settings or any we're what can do

Go to settings, general, Siri and make sure it is turned on. Then press and hold the home button and Siri should pop up.

How to add a search/edit/delete options for the following program.

after printing the out put, i want to search for the line and i want to edit the same line then add to the output and also i want to delete the line from the command line
import java.io.BufferedReader;
import java.io.File;
import java.io.FileWriter;
import java.io.IOException;
import java.io.InputStreamReader;
public class CustomerDetails {
public static void main(String[] args) throws IOException {
BufferedReader dataIn= new BufferedReader(new InputStreamReader(System.in));
FileWriter writer;
String name= "";
String DOB = "";
String Address = "";
String Phonenumber = " ";
File filename = new File("customerData.txt");
boolean append = true;
writer = new FileWriter(filename,append);
writer.write("\n");
try {
System.out.println("Please enter your name");
name = dataIn.readLine();
System.out.println("please enter ut DOB");
DOB = dataIn.readLine();
System.out.println("please enter ur Address");
Address = dataIn.readLine();
System.out.println("please enter ur phone number");
Phonenumber = dataIn.readLine();
writer.write("name:");
writer.write(name);
writer.write("DOB:");
writer.write(DOB);
writer.write("Address:");
writer.write(Address);
writer.write("Phone number:");
writer.write(Phonenumber);
writer.close();
catch (IOException e) {
e.printStackTrace();
System.out.println("thanks for entering the data");
}

Well, what I'm suggesting isn't as simple as editing a few lines.
Are you familiar with using objects?
The idea is to organize your data in a way that makes sense. Since you want to keep track of multiple people at once, does it make sense to only have one variable each for name, address, etc? If you put all of the variables dealing with a person into a Person object, you can then instantiate as many people as you'd like- without worrying about keeping track of them one variable at a time.
I'd say that should be your first step. After that, we can talk about searching through them.

How do I create a new Work Center for the transaction launcher and links

Hi
The requirement here is for me to find out if I can create a new Work Center that will contain up to 6 assignment blocks and each block having either links to websites and BW reports, or triggers to R/3 applications via the transaction launcher.
Can I do this purely through customising or do I need to create a new view using BSPs? If I can do it through customising please could I have a few pointers to what component I would need to use/copy?
Regards
Declan

Hi Robert,
Thanks again for taking the time to reply.
Just so I understand, if I want to show a work center I need to link it to a component / view? I think this was the original query - do I need a developer to create the view that contains the 6 blocks with their links to reports, transactions and websites? I think when I talk about blocks I mean 1 viewset containing 6 views. There is no SAP standard view that would suit my requirements is there? Even if the work center had 8 views, I can always hide the two views in configuration.
After the developer has created the view, I then reference that component in the target Id in the define logical links section of my work center.
If my understanding is right, then it follows that it is not possible to create a user specific work center without some development.
Is this correct?
Cheers
Declan

How to get dimensions information to appear next to the mouse cursor when drawing/ making selections

Hello,
On a previous computer I used Illustrator for, when I would draw or make selections, next to the cursor in a small black box with white text, there would be the dimenstions information. It was similar to what you'd find in the Window>Info panel but simplified and would let you know how big the selection you're making is. I've looked all over the Preferences and can't find it. I can't tell if I was imagining it somehow or what, but I'm hoping someone knows what I'm talking about and knows where to find it. Thanks.

Use smart guides: Cmd/Ctrl + U

How to get Itunes 8 on Windows 98 for the Ipod Nano

Is it possible to download Itunes 8 for Windows 98? Whenever I plug my new ipod nano in, it says that I need Itunes 8. I can't download Itunes 8 because I dont have Vista, or something???

You are posting in the iPod Nano 1st Generation forum, but since you say you have a new nano I am going to assume it is the 4th Generation Nano.
Windows 98 cannot run iTunes 8, and even if it could the 4th Generation Nano is not compatible with Windows 98. You might try 3rd party software, such as Xplay, but I'd check it out first and make sure it is compatible with the 4th Generation Nano.

How to get this script to auto detect if the server freezes and have it restart automatically

taskkill /im arma2oaserver.exe
timeout 4
taskkill /F /im arma2oaserver.exe
timeout 4
:: fix the hive ini file..
set dayzpath="D:\DayZ_Server_Panthera"
cd /d %dayzpath%
start "" "dayz_epoch_set_to_day.bat"
timeout 4
:: Rotate Logs..
set dayzrotate="D:\DayZ_Server_Panthera\Logs_last_restart"
cd /d %dayzrotate%
start "" "Rotate_logs.bat"
timeout 5
:: start the server..
set dayzpath="D:\DayZ_Server_Panthera"
cd /d %dayzpath%
start "" "Start_Panthera.bat"
timeout 10
:: start bec
set becpath="D:\DayZ_Server_Panthera\BEC"
cd /d %becpath%
start "" "bec.exe" -f epoch_1.cfg
timeout 10
taskkill /im cmd.exe
cls
exit

Hi there
Normally all you need to do is specify the file name. No path or URL needed. Just the file name. After that, ensure the file exists in the same folder as the Captivate.
Note, however, that if your server is a UNIX type, it could be persnickety about the case. So if your file is actually named MyFile.PDF and when you typed the file name into the field you used myfile.pdf, it likely won't find it.
Further note that some file types will be some trouble. But before we go there, let's see if what has been offered so far helps anything.
Cheers...
Click here for Adobe Authorized Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

How to get more than 256 bytes data

hello.
I use Schlumberger 32K Card�iJava Card 2.1�j.
Please tell me how to get more than 256 bytes data from the applet in the card!!
According to JCRE specification, need to use Get Response Command.
What is Get Response command?
Do I have to write processing of Get Response command to an applet?
Or JCRE processes Get Response command?
If knows, please tell me about!!
Thanks.

Thanks for your response!!
I understand that I have to write processing of Get Response command to an applet.
But case of Schlumberger 32K card, when host send Get Response command to an applet, card reply 6F-00!?
I'm investigating now, and it seems that response is returned before applet processes Get Response command(CLA = 00, INS = C0).
Do JCRE perform the process of Get Response command?

How do I get more than one signature option in Fill and sign?

How do I get more than one signature option in Fill and sign?

Hi,
Are you trying to place more than one signature on a PDF document?
Please explain the workflow.
Regards,
Anand

How can I restrict more then one user to access the table?

Hi !
I have a problem and two solutions and I am a bit confused as to
which one is the best one and/or can there be any better way of
handling the problem ?
Problem : I have to update a key field of a table when I update
it in the form 5.0 screen. I am basically doing a maintenance of
a table and if a certain field is updated then the change has to
be reflected in two more tables. But the issue is that the field
is a part of the key in those two tables. So all I can think of
is that I need to insert new set or rows for that new value of
the field and delete the old set of records for old values of
the field.
There are two ways of doing it;
1.One option can be to explicitely define two cursors separately
and fetch the values in them one by one and then insert the new
records and then delete the old records in both the tables. This
I feel will be a cumbersome process both in terms of processing
time and the coding.
2.Second option I was thinking can be to create two flat tables
(without keys) and insert the values in them and update the
changed field there and then insert the rows in the respective
tables. Delete the old records in the main tables and delets the
records in these flat tables. This is a bit more faster and
easier to predict and code. This seems to be a better option for
me.
Any comments on these ?
In both the cases I was thinking of making some provision so
that more then one person can't update the table simultaneously.
Since if there are more then one persons doing the processing
then some inconsistency might creep into the whole process.
This is easier to do in the second process as if I check the
data in the flat tables and if there is some data then I can
presume that some one is doing the processing and I can ask the
other person to hold for a while. But in this case how can I
stop more then two people to simultaneously check for the empty
table and start inserting the record ?
I was just thinking of having a sepatare table having only one
field and this will be a key field and as the process begins the
process will insert a fix value say 'Y' in the key field and at
the end of the process the record will be deleted and this way
we can restrict the user to access the process more then one at
a time..? Since you can't have same value of the key in a table
more then once.
Any better way of handling it will be deeply appreciated.
How about locking the table at the begining and releasing the
lock at the end ? Will there be any issue in that? since I am
inserting and deleting the rows in the same transaction.
Comments welcome,
Shobhit
null

How about performing the update IN the database using a stored
procedure?
By using non-database fields on your form to get the
information, you can then call the procedure in the database to
perform the updates. If an error occurs in the procedure you
rollback, if necessary, and send a message or status back to the
form. If it succeeds you might wish to commit and then re-
execute the form's query -- using either the original key values
or the new key values...
null

How come although iPads are getting more powerful, the iOS apps from apple are so mediocre and just not that great? We spend all this money for the latest ipad and all we get is these $5 video and music apps from apple. Why create the iOS platform and onl

How come although iPads are getting more powerful, the iOS apps from apple are so mediocre and just not that great? We spend all this money for the latest ipad and all we get is these $5 video and music apps from apple. Why create the iOS platform and only offer so so apps like IMovie and GarageBand ? While other developers are offering much better apps like pinnacle studio for video, Cubasis and Auria for music production, apple has not showed much growth in terms of innovation. While there's nothing wrong with making an app like GarageBand where "anyone " can make a song, how about something for real musicians or an app not so basic as it get for video editing? After spending 0ver $700 on an ipad I'd be willing to spend more than $5 for a better video or audio app.

First, try a system reset although I can't give you any confidence. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

How to get more then 2 Appearance options for the overall look and fell?

Similar Messages

Maybe you are looking for