How to get moving average price in 0ic_c03 with back dating

Hi all,
The stock overview report in 0IC_C03 gives stock values based on Purchase value where as i need to calculate the stock value based on Moving average price, (so that it tallies with R/3 std report MB52), also need to get the stock value for backdating also i.e like MB5B standard report in R/3.
<removed by moderator>
Thanks & Regards
Suresh Putta & Ravi Y
Edited by: Siegfried Szameitat on Jan 19, 2009 12:12 PM

Hi,
The stock overview report in 0IC_C03 gives stock values based on Purchase value where as i need to calculate the stock value based on Moving average price, (so that it tallies with R/3 std report MB52)
--> Need to enhance 0IC_C03 for moving average price and need to multiple Quantity with price to get value. You can do this at extraction level(Transformation / update rules) or Query level.
also need to get the stock value for backdating also i.e like MB5B standard report in R/3.
Or Maintain material price as Material attribute and create a multiprovider on 0IC_C03 and Material and calculate value at query level. In this approach value getting derived based on available price only(means historic values may change if price changing over period of time).
Srini

Similar Messages

How to get Moving Average Price ( MAP ) & Standered Price in BW

Hi all,
I want to get the Moving Average Price ( MAP) & Standered price in BW Report.So that please suggest me
1. which Cube I have to use &
2. which datasource having that Moving Average Price ( VERPR) Field.
If having other Procedure to calculate Moving Average Price in BW .
please give me these details.
Thanks,
kiran

Hi Kiran,
0IC_C03 Cube can be used to bring the fields you require.
Please search forum post by Anil Kumar, link is not available thats why i am copying the text here.
You need to enhance the Standard DS of Infoobject 0MAT_PLANT and Infoobject 0MAT_PLANT to include these 2 fields.
And you need to enahance the 0IC_C03 cube to include 0MAT_PLANT and need to complete the mapping in all 3 Update rules for this added Infoobject.
And you need to upload the attribute data of 0MAT_PLANT as full upload every day.
In the reports , you need to dependent on Formula varibles with replacement path with standard price an MAP price attributes of 0MAT_PLANT. So if you go with these formula variables with replacement path, you should take 0MAT_PLANT characterstic into rows as a prerequiste.
If you want to avoid this prerequisite, then take a look on How to calculate with attributes values.
Other wise you need to do the calculations at 0MAT_PLANT level by a base query after every upload,and the result should be stored in TODS by APD .And then you can final report with out 0MAT_PLANT in rows upon this ODS.
please see this links
Re: 2lis_03_um and MBEW- STPRS
Re: How to get Moving Average Prince and Standard Price in BW (inventory cube).
Hope this Helps.
Thanks
CK

How change the moving average prices?If run costing done In the MR21 system

hI,
How change the moving average prices?If run costing done In the MR21 system notallowing the changing the prices?
Regards
Channa

Hi
Showingerror
A current or future standard price exists for material 300000007
Message no. CKPRCH025
Diagnosis
A current or future cost estimate exists.
Procedure
You can set the price of a marked cost estimate through the radio button 'Default Planned Prices' and release it by saving.
Please what is the process changing moving aveerage prices

How to get Moving Average Prince and Standard Price in BW (inventory cube).

Hi All,
Could anyone please suggest us how to get Moving Avg. Price and Standard Price for 0ic_c03 cube, i had gone through 0CO_PC_ACT_05 and 0CO_PC_ACT_02 datasource but it is not going to solve our purpose.
In SDN i had gone through few links and understood that we have to work on 0MAT_PLANT info object but i hav't not found how to work on this, though i found few SAP notes which are related to MAP. (869892, 819464, 863644).
Probably some one might worked on these MAP and Std. Price, if you could share your work which us that will be a greate help.
Highly appreciated if you share the code and steps how to work on MAP and Std. Price.
Thanks in Advance.
Akash

Hi,
You need to enhance the Standard DS of Infoobject 0MAT_PLANT and Infoobject 0MAT_PLANT to include these 2 fields.
And you need to enahance the 0IC_C03 cube to include 0MAT_PLANT and need to complete the mapping in all 3 Update rules for this added Infoobject.
<b>And you need to upload the attribute data of 0MAT_PLANT as full upload every day.</b>
In the reports , you need to dependent on Formula varibles with replacement path with standard price an MAP price attributes of 0MAT_PLANT. So if you go with these formula variables with replacement path, you should take 0MAT_PLANT characterstic into rows as a prerequiste.
If you want to avoid this prerequisite, then take a look on How to calculate with attributes values.
Other wise you need to do the calculations at 0MAT_PLANT level by a base query after every upload,and the result should be stored in TODS by APD .And then you can final report with out 0MAT_PLANT in rows upon this ODS.
You can see my contact details in my business card.
With rgds,
Anil Kumar Sharma .P
Message was edited by:
Anil Kumar Sharma

How to change moving average price with movement type 501

Hi Gurus,
Our client procures stock item with P-Card and use the movement type 501 to receive into the stock. The value of these items are updated with the moving average price, most of the time the current purchase price is different than current moving average price, so client wants to change the moving average at the time of receiving the goods into the system. Can some one explain is it possible or not. If possible how can we adjust the price? Client doesnu2019t want to go modify the price with other transaction. They want to modify while receiving with MIGO.
Thanks,
Vikram

Hi
You need to goto transaction OMJJ, select the movement type as 501.
Then double click on "Field selection-Enjoy transaction".
Add the field EXWBR & make it optional.
Now when you goto MIGO & enter 501 movement type you will find the Ext amount in LC field on Quantity tab page.
Enter the amount in this field during the GR.
Regards
Prasad

How to calculate moving average price?

hi,
i need someone to explain to me how to calculate moving average price

Hi,
Follow the Link,
Re: moving average price

How to calculate moving average price(MAP) when price variance in IV

Hi All,
My current stock for a material is 39 and MAP is 0.8 GBP.
A purchase order is created for the material for a quantity of 1 at price of 0.8 GBP per unit.
Invoice is posted for the above PO at price of 1.74 GBP.
What will be the new MAP for the material now??How to calculate MAP when there is a price variance in Invoice?
Please suggest ASAP.

Hi,
The Procedure for calculating MAP is :-
Case 1 :- PO at different price
If in Material Master your MAP is 0.8GBP & closing stock of 30Nos, value is 24GBP
In PO if the price is 0.9GBP & qty is 10nos, then after Goods Receipt Total Value of the GR i.e. Qty * Price + any other delivery cost will be added to the material stock value. Qty is also updated. New Total Value / New Stock Qty will be MAP.
In this case Qty received 10 & price is 0.9 that means value would be 9GBP.
Total Value becomes 24GBP (Present Stock) + 9GBP (Goods Receipt) = 33GBP
Total Qty becomes 30Nos + 10Nos (Goods Receipt) = 40Nos
MAP becomes = 33GBP / 44Nos = 0.75
Case 2 : Invoice Posting (MIRO) at different price than PO
While doing MIRO is we post at different price system will check whether sufficient stock posted in GR is available. In the above case it is 10Nos,
If it is there, then the above logic as in case 1 will take place
If not available, to the extent of stock availability system will post the different value & adjust MAP & remaining is posted to Price Difference Account.
In your case it would be like this :
1. MAP 0.8 for 30Nos (Value would be 24GBP)
2. Invoice Posting 1.74GBP for 1No. That means value would be 24GBP + 1.74GBP = 25.74GBP
Qty would be 30+1 = 40
MAP = 25.74 / 40 = 0.64GBP
Hope this clarifies your doubt
regards,
JP

How to change Moving average price in accouting view at valuation cat level

Hi,
We are loading Material Master data for one client. We are using LSMW to load this object
We have uploaded u201CMoving Price (MBEW-VERPR)u201D in Accounting 1 view at valuation category level. Unfortunately incorrect value has been loaded Is it possible to change??
We donot have stock for this materials.
When I tried to do this using MM02, I understand that itu2019s grayed out field and cannot be changed in second attempt.
Let me know if there is any other procedure to handle the situation??
Rajesh Chavan

Hi
You can change the same through MR21
regards
Sanil

Chage Moving Average Price

Dears,
How to change moving average price in Material Master - as in MM02 it is grey out. Thanks.

Hi
Check it in MR21
Regards,
Raman

Moving Average Price -COPC

Hi all,
How to configure moving average price in COPC?
Is that in MM03 just put "V" there?
Or got another setting in COPC configuration?

also for 'S' the standard cost estimate is not a must. Just entering an S-price in MM01 or MM02 is also an option.
best regards,
Udo

How to get Material Master Moving average price into Purchase Order

Hi,
How to get Material master moving average price into purchase order instead of Purchase Info record.
Thanks,
Sridhar

Hi,
        I cannot understand whether it is necessary .
       How about as following step?
             1. create Purcahse requisition
                            Price come form moving average price in material master.
             2. Create Purchase order reference Purchase requisition
                            There is a setting from the unit price of P/R onto the unit price of P/O.
Regards,
     Gaito

How to view materials with selected moving average price

Dear Gurus,
How to view materials with moving average price greater than some selected value? ie..Is there any report which takes moving average price as input?
Thanks in advance,
Sastry

HI
While checking any table or report u cannot give conditions (more than this value).
If it mabe the case, down load the data from table MBEW - Field Name VERPR to excel file. then u apply conditions, like greater than this value.
U'll get the desired out put.
Thanks
Raman

Automatic MAP ( Moving average Price) in CDHDR - How to capture?

Hi All,
I have a requirement in which changes to Moving Average price ( MAP) needs to be send to another legacy system through custom MATMAS IDOC. Now when I make a change to MAP through MR21 or MM02 these changes are written in BDCP table and a change pointers are created and hence i am able to send them through IDOC. But when for a material the MAP changes through GR,GI Oor PO changes in such cases the MAP change being an automatic change it doesn't get captured in CDHDR and CDPOS table and hence no change pointers are created. I know CDDHR and CDPOS captures manual changes and not automatic changes. Could anyone please explain me in details how this problem can be resolved.
Thanks ,
Ameesha

Hello,
I doubt a GR,GI or PO can change the Moving Average Price.
It should be only through MR21.
Please check again.
Rajeev

Inventory Controlling - Get history moving average price function - Urgent

Dear Experts,
Currently I have an issue that I want to calculate material history value at storage location level for each month. I tried to get history stock quantity and value from table S031, stock quantity is correct. But stock value (goods receive value minus goods issue value in table S031) is not correct.
Client requests the resulet should be same as transaction code MC.9 (valuation selection - standard). But what the result I got from table S031 is the value that without disctribution. Currently I do not know how MC.9 calculate stock value.
Does any expert know if there is a funciton that can get history moving average price. I may use this price multiply history stock to get history value. Thanks
Best Regards
Angela

Hello,
Moving average cost history is available in MBEWH-VERPR.
Thanks,
Venu

Moving Average Price does not get updated for Project Stock

Hello Experts
We have an Engineer-to-Order implementation for our client. Accordingly procurement is done per project. Each Project issues its PRs which are then converted to POs and recieved into Project Stock.
While assigning the material to the Network activity in Project (using material component) the system uses the price found in the material master (MAP or STD) as a planned cost appended to the project.
Problem:
while procuring the material, when we receive it into Project Stock (Mvt 101 Q + ) the Moving Average Price in the material master does not get updated. this way all newly created material master will never have a moving average price, thus whenever we try to assign them to the project we receive an error message (Cost for Material Component ###Mat.Num### cannot be determined.
Question:
How can I get the system to update moving average price (for all types of stock) based on procurement for project stock.???
Your help is kindly appreciated.

I'm sorry for the confusion
Case:
The T-code is CJ20N Project Builder in PS module
we are assigning material components to network activities under a certain WBS element in the project.
there is a function in the Project Builder to calculate the cost of a network. it uses the costing variant assigned to the network which is PS02 (We get the error here)
The costing variant has a valuation variant which lists a series of strategies to get the material price. Planned 1 if not then STD if not then MAP. (you can choose between many options via a drop down menu) you can choose 5 consequent options.
The MAP that the valuation variant is coded to get is the Plant Stock MAP -- Or the Project Stock MAP but only Per WBS element.
The MAP that the Actual postings update is the Project Stock MAP only Per WBS element.
This means that if you use a material component to purchase material 123 Acc.As. Q for WBS X for 10 $ then you try to assign a new material component with the same material 123 to WBS Y, the system will not get a MAP. because it's stored in QBEW per WBS element.
This way the system will never get the MAP right.
However, we don't always use project stock to procure for projects, for some requirements we can assign and use plant stock as well for Projects. that way we need the MAP from plant stock.
In the Valuation Variant you can use a User Exit Strategy. The user exit's name is COPCP005
My Suggestion is:
Use the User Exit COPCP005 to calculate the { Total value / the total quantity (MAP) from QBEW + Total value / total quantity (MAP) from MBEW } / 2
which is the MAP for both plant and project stock together, since that we are going to use both.
Q: Is this correct !?

How to get moving average price in 0ic_c03 with back dating

Similar Messages

Maybe you are looking for