How to get MR Document from Billing Document at the table level
Hi All,
I am looking to find the MR Document based on which the Billing Document was generated. I need to find it out at the table level.
I looked into DBERCHZ2 table, but I can see a single billing document is linked to multiple Meter Reading Documents via different Line Items.
Could you guyz please help me? Am I seeing the right table? Is there any FM or ABAP program for the same?
Thanks a lot in advance.
Regards.
Hi ,
The link is Installation to get MR Doc from Bill Doc .
from ERCH-BELNR , fetch Contract (VERTRAg ) and then from EVER-VERTRAG get Installation (ANLAGE).
Get MR Doc(ABLBELNR) from EABLG based on EABLG-ANLAGE.
Thanks ,
Sachin
Similar Messages
-
How to get Accounting document with the help of Controlling document?
Hi
Where do we get FI document and CO document link?
Issue is we are trying to generate a CO report and trying to get transactional data from BSEG.So is there any table where we find FI document&CO document LINK?
regardsHi,
Good afternoon and greetings,
Link it between COSP, COEP and COBK for Cost Centre and for Profit Centre GLPCT, GLPCA, GLPCO and GLPCC.
Please reward points if found useful.
Thanking you,
With kindest regards
Ramesh Padmanabhan -
How to get selected row from a non-bind ADF table
Hi,
I have an ADF table that is based on a collectionModel built programmatically. The collectionModel is this:
model = new SortableModel(new ArrayList<ArrayList>());
Hence, it is not a binding table. My question is how to get the selectedRows from a non-bind table.
I am used to building binding ADF table and I know we can get it from voiterator.getCurrentRow, since the selectionListener is set to the binding....collectionModel.makeCurrent
<af:table value="#{bindings.ItasLookupTypesVO1.collectionModel}"
selectedRowKeys="#{bindings.ItasLookupTypesVO1.collectionModel.selectedRow}"
selectionListener="#{bindings.ItasLookupTypesVO1.collectionModel.makeCurrent}"
</af:table>
I am thinking maybe I need to write my own selectionListener, but need more advice/ideas of what's the codes in the customer selection Listener to get it from my SortableModel.
Please help.
Thanks
-MinaI'm not sure if this works in your case, but check out the selection listener I write in this blog http://wp.me/pcBZk-eu
You should use the selection event and check the added set. This should give you access to the selected row.
Timo -
How to get a value from a column inside a table
Hi,
I have got the following problem. I have got a table with some data inside. And a new column, which is not in the dataprovider. Now i search for an opportunity to go through the rows of the table and check the value of this column. I cant do this with the dataprovider or the rowset. My question is now how can i do this? The table object doesnt seem to have a corresponding method.
Thanks in advance for help
Acinonyxthis is some code you can use (based on Winston's and others' tips):
put this in you page bean:
private HashSet selectedRows = new HashSet();
public boolean isSelected() {
TableRowDataProvider trdp = (TableRowDataProvider)getBean("currentRow");
if (trdp == null) {
return false;
RowKey rowKey = trdp.getTableRow();
if (this.selectedRows.contains(rowKey.getRowId()))
return true;
else
return false;
public void setSelected(boolean b) {
TableRowDataProvider trdp = (TableRowDataProvider)getBean("currentRow");
RowKey rowKey = trdp.getTableRow();
if (checkbox1.isChecked()) {
this.selectedRows.add(rowKey.getRowId());
Object v = this.t_fotoDataProvider.getValue("fieldName", rowKey);
} else {
this.selectedRows.remove(rowKey.getRowId());
and then bind the "selected" property of the checkbox column to the "selected" property of the page bean.
Now, eveytime the page is submitted, you can do something useful, for example, in the setSelected() method (the row that starts with Object v = ... get's the value of some field corresponding to the checked row)
Mauro -
GTS How to get commodity code from material master ? function/ table
Hello,
I have to write a "simple" program in GTS system. (In SD Commodity code is field MARC-STAWN )
The customer wants to enter material numbers ( from x to y )
and the program should display:
Material--Material text--Commodity codevalidity from--
validity to
4711--Maschine_A--12345678905.08.2006--
31.12.2008
124587444--01.01.2009--
31.12.9999
4712--Maschine_B--5656568901.12.2007--
31.12.2009
(The customer wants to have a look if all Commodity codes in GTS are maintained)
Can someone give me the name of the tables where it is stored in GTS?
Or are there any function calls to get material data?
best regards and many thanks
Norbert
Edited by: Norbert Zanders on Jan 1, 2009 5:08 PMYou have to consider the following tables:
/SAPSLL/PNTPR --> product number and GUID
/SAPSLL/PRCTS --> product GUID and GUID of commodity code
/SAPSLL/CTSNUM or /SAPSLL/CTSNUMC--> commodity code (general or country specific)
/SAPSLL/CTSNUMT --> commodity code description
/SAPSLL/PRT --> material description -
How to select multiple records from a TREE in the table
HI,
I have a tree structure which is in the table.When I open the node of the tree,all the subnodes are coming as one-one records in the table.I want to slect multiple record from this table.I applied onLeadSelect for this table,I can select only 1 record from the table.
Can any one plz suggest me how to select multiple records from the table so that I can get all the data of those selected record.
Regards
-SandipRashmi/Kukku,
First of all, Thanks for your help!
Is there any other way in which we can access tables other than using BAPIs or RFCs?
In my case, there is a table structure which has to be updated with values after validating a key. i don't think there is any RFC available now. do i need to create bapi/rfc for that?
Krishna Murthy -
How to get ship to from bill to
Hi experts,
I am getting bill to and i need to get ship to on the base of bill to .
from which table i will get it .
thanks in advance.
thanks,
neoYou have to go to KNVP, give the following values to get the corresponding sold-to and then get the ship-to for that sold-to.
VKORG = 'your sales organization'.
VTWEG = 'your distribution channel'.
SPART = 'your division'.
PARVW = 'RE'.
KUNN2 = 'your bill-to'.
You will get the sold-to in the KUNNR field. Then using this KUNNR, go to KNVP again to get the ship-to as follows.
KUNNR = 'KUNNR obtained above'.
VKORG = 'your sales organization'.
VTWEG = 'your distribution channel'.
SPART = 'your division'.
PARVW = 'WE'.
KUNN2 will have the ship-to number. Remember that the same bill-to can be assigned to several sold-to and there can be several ship-to for one sold-to. It is not one to one. -
How to import a class from a package at the same level
Hello friends,
i have a class as Plaf.java
as
package org.vaibhav.swing.plaf;
import java.awt.*;
import javax.swing.*;
public class Plaf {
other code
}as you see, this is in org.vaibhav.swing.plaf package.
I have one more class as
package org.vaibhav.swing.frames;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class StartFrame extends JFrame implements ActionListener {
other code
}and this class is in package org.vaibhav.swing.frames
Please hlp me how to use the class Plaf in StartFrame.java. Rather what import statement should i use in StartFrame.java.
please help.
thank you
Message was edited by:
vaibhavpinglebut it then gives me this error
StartFrame.java:11: package org.vaibhav.swing.plaf
does not exist
import org.vaibhav.swing.plaf.*;
Have you first compiled Plaf.java and saved it in this directory strucuture
/org/vaibhav/swing/plaf/
And also have you set your classpath to the parent directory of org folder.
Message was edited by:
qUesT_foR_knOwLeDge -
How to get Accounting document number from billing document number
Hi,
How to get Accounting document number from billing document number i.e. from VBAK- VBELN.
Cheta PantHi,
VBAK is the Sale Order header table, Billing document table is VBRK.
Sales tables (VBAK,VBAP,VBRP,VBRK) do not store accounting document numbers.
You do other way around. Just go to SE16 and enter the Billing document number in field Billing document VBELN in BSEG or BSID or BSAD table and execute, you will find the accounting document number.
If you just want collect this information once then you can use table BSEG, but if you think to develope a report then use table BSID and BSAD.
Regards,
Chintan Joshi -
How to get Invoice Document from Accounting Document
Hi Experts,
How to get Invoice Document from Accounting Document. Can you suggest some tables.
Regards,
Mohanhi,
in vf02 or vf03.
go to document flow
select an accounting document - double click it.
GOTO header you will find reference field there & it is nothing but billing document.
in FB03 also you can findout the same if you know an accounting document.
tables which they store are BKPF & BSEG
balajia -
How to get payment document number from paid column in monthly invoice
Dear experts
I use SBO japan version and i need to know how to get payment document number from paid column in monthly invoice ?
in table MIN1, only contain invoice and credit note document number, there is no payment document number
thank you for your help
Best Regards
JeiMingDear Gordon
Yeah, you are right, i can use field MIentry in RCT2
thank you
Best regards
jeiming -
How to get Adobe documents to Adobe Reader on Iphone?
I downloaded Adobe Reader to my Iphone. When i tapped on a Adove file i got on my email(on my iphone) it said "saving to disk", wich disk is it talking about? And how can i reach it from my Adobe Reader app?
MargretheS,
What is the mail app that you use on your iPhone. Apple Mail (the default iOS mail app) does not show the message like "save to disk".
Did you find the answer to your question in How to get PDF documents into Adobe Reader for iOS (iPhone on iOS 7 version)?
Please let us know if you have additional questions. -
New document alert: How to get PDF documents into Adobe Reader for iOS
Opening PDF Files in Reader for iOS (iPhone and iPad) has been very helpful to many users of Adobe Reader for iOS. However, Apple has drastically changed the user interface in iOS 7, which made the original document obsolete.
According to Apple Developer Support's App Store Distribution page, 89% of devices connected to the App Store are using iOS 7 during a 7‑day period ending June 29, 2014.
Because of the exceptionally high iOS 7 adoption rate, Adobe Reader for iOS version 11.3 now supports iOS 7 only.
Here are the new How-To documents for iOS 7.
How to get PDF documents into Adobe Reader for iOS (iPad on iOS 7 version)
How to get PDF documents into Adobe Reader for iOS (iPhone on iOS 7 version)
(It had to be split into two separate documents because each contains way too many screenshots.)
Hope these documents are as helpful as the original one.
Please let us know if you have any feedback or suggestions on the topics for other help documents/tutorials.Dennis (or any Adobe rep),
Any updates to the OP's question? I'm with a large government agency, and we're moving away from GoodReader for reasons I can't go into here, and the ability to add user-defined bookmarks within the app is a mandatory feature for the document reader we select. I have the latest version of Adobe Reader (11.6.1) installed on my government iPad, and the ability to add user-defined bookmarks still seems to be missing. Does Adobe have any plans to add this feature, or is it already present and I'm simply overlooking it?
Thanks,
Cam -
How to get real value from selectOneChoice with javascript?
Hi,
How to get real value from selectOneChoice with javascript? The event.getNewValue() only gets me the index of the selected item, not the value/title.
JSF page:
<af:resource type="javascript">
function parseAddress(event)
alert("new value: " + event.getNewValue());
</af:resource>
<af:selectOneChoice label="Location:" value="" id="soc4">
<af:clientListener type="valueChange" method="parseAddress" />
<f:selectItems value="#{Person.locations}" id="si7"/>
</af:selectOneChoice>
HTML :
<option title="225 Broadway, New York, NY-10007" selected="" value="0">225 Broadway (Central Office)</option>
<option title="90 Mark St., New York, NY-10007" value="1">90 Mark St. (Central Office)</option>
Thanks a lot.Something I was missing ,
You need to add valuePassThru="true" in your <af:selectOneChoice component. I have personally tested it and got the actual value in alert box. I hope this time you got the real solution. You can also test the following code by your end.
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document id="d1">
<af:form id="f1">
<af:panelBox text="PanelBox1" id="pb1">
<af:selectOneChoice label="Set Log Level" id="soc1"
value="#{SelectManagedBean.loggerDefault}"
valuePassThru="true">
<af:selectItem label="select one" value="First" id="s6"/>
<af:selectItem label="select two" value="Second" id="s56"/>
<af:clientListener method="setLogLevel" type="valueChange"/>
</af:selectOneChoice>
<af:resource type="javascript">
function setLogLevel(evt) {
var selectOneChoice = evt.getSource();
var logLevel = selectOneChoice.getSubmittedValue();
// var logLevelObject = AdfLogger.NONE;
alert("new value is : " + logLevel);
//alert(evt.getSelection);
//alert(logLevelObject);
evt.cancel();
</af:resource>
</af:panelBox>
</af:form>
</af:document>
</f:view>
</jsp:root> -
How to get a value from JavaScript
How to get return value from Java Script and catch it in c++ code. I have tried following code, but its not working in my case.
what I want is if it returns true then call some function if it returns false then do nothing, so how to get those values in c++
ScriptData::ScriptDataType fDataType = resultData.GetType();
if (fDataType == kTrue)
CAlert::InformationAlert("sucess");
//call some function
else
CAlert::InformationAlert("Error");
// do nothing
JavaScript Code:
if(app.scriptArgs.isDefined("paramkeyname1"))
var value = app.scriptArgs.get("paramkeyname1");
alert(value);
return true;
else
alert ("SORRY");
return false;How to get java script result into JSResult i m not getting it.
I have wriiten follwing code in c++ :
WideString scriptPath("\\InDesign\\Source1.jsx");
IDFile scriptFile(scriptPath);
InterfacePtr<IScriptRunner>scriptRunner(Utils<IScriptUtils>()->QueryScriptRunner(scriptFi le));
if(scriptRunner)
ScriptRecordData arguments;
ScriptIDValuePair arg;
ScriptID aID;
ScriptData script(scriptFile);
ScriptData resultData;
PMString errorString;
KeyValuePair<ScriptID,ScriptData> ScriptIDValuePair(aID,script);
arguments.push_back(ScriptIDValuePair);
PMString paramkeyname1;
Utils<IScriptArgs>()->Save();
Utils<IScriptArgs>()->Set("paramkeyname1",scriptPath);
Utils<IScriptUtils>()->DispatchScriptRunner(scriptRunner,script,arguments,resultData,erro rString,kFalse);
Utils<IScriptArgs>()->Restore();
ScriptData::ScriptDataType fDataType = resultData.GetType(); // here i should get true or false which i m passing it from javascript code......not as s_boolean
if (fDataType == kTrue)
//CAlert::InformationAlert("sucess");
iOrigActionComponent->DoAction(ac, actionID, mousePoint, widget);
else
this->PreProcess(PMString(kCstAFltAboutBoxStringKey));
Java script code:
function main()
var scrpt_var;
var scriptPath,scrptMsg;
var frntDoc=app.documents[0];
if(app.scriptArgs.isDefined("paramkeyname1"))
var value = app.scriptArgs.get("paramkeyname1");
alert(value);
return true; // i want this value i should get in c++ code...How to get these values in c++
else
alert ("Error");
return false; // i want this value i should get in c++ code...How to get these values in c++
Maybe you are looking for
-
...for me to remove the harddrive from my g4, turn it into an external harddrive, and attach it to a mini? We had a power outage, which fried our power source. Our harddrive should be just fine, but since we have a "vintage" machine (G4 from '97) the
-
With the older version I was able to print a playlist of 24 songs that would fit on a case. The print was single-spaced on the older version, but on this version, the print is double spaced and it no longer fits on a case. Does anyone have an answe
-
My 5 yr old 2 GHz Intel Core Duo 20" iMac, right after I disconnected an external HD that had been on the desktop (i.e. I forgot to eject it properly), started displaying video anomalies (lines); testing (TechTool Deluxe 3.1.3) indicates the video is
-
Transparency in png image not showing
Hello, I have a Region, which needs a background and an image 'on top' of it. I can set the background using setStyle("-fx-background-color: #" + 123456 + ";"); Or I can just use a Rectangle of that colour. Then I have an ImageView... spiralImgView
-
Hello everyone. Just using the iPad for the first few weeks. So still learning. I want to know which app is shown on the iPad mini advert? Looks like a nice tool to learn to annoy the girlfriend.