How to get multiple copies with different decription on header line

I want to get multiple copies of print out automatically with different description on header line when i click on save or print button.

is this smartforms....?
if yes then this can be achieved using the copy windows concept of smartforms.....
Regards,
Lalit Mohan Gupta

Similar Messages

Can anybody explain how to print multiple copies of different documents at the same time as at the moment I have to open each individually and press print

Can anybody explain how to print multiple copies of different documents at the same time as at the moment I have to open each individually and press print

is this a windows in bootcamp question ?

How to schedule multiple reports with different local to change static field language ?

Hi all,
we have requirement that we will place multiple schedule request on same server ,This schedule request will be different local setting with parameter value like: en-GB,en-US,Chinese...etc .We used translation Manager for this and it takes this parameter and change report language for static fields.
problem is that ,on server it is not working properly,we tested for one report .if we pass prompt value to change local setting in report the we need to log off and login again in CMC to reflect new local or on BI Launchpad we need to refresh page then it shows new language.
How we can do this with multiple scheduled report which will have different local value like en-GB,en-US,Chinese,German....?These schedule request are getting placed in server by one user .
Please help us with sample code.
Thanks
Madan

Hi,
The only approach I can think of is to create a template report which uses variables
For each column you would need to variable
v_columnAName and v_columnAValue
v_columnAName would have a if statement in it
=if([client]="clientA" or [client]="clientC";NameOf([firstName]);if([client]="clientB";NameOf([SSN]);NameOf([lastName]));
v_columnA would have a if statement in it
=if([client]="clientA" or [client]="clientC";[firstName];if([client]="clientB";[SSN],[lastName]));
This would only work when you had a small set of clients.
This might be more managable if it was done in the universe
Regards
Alan

How to backup multiple iphones with different iCloud accounts but same apple id?

I would like to back up 3 idevices each with different icloud accounts to itunes. But they use the same apple id so that itune purchases can be installed on each device (2 iphones and 1 ipad).
All I want to do is create a backup in case the phones need to be restored. I also want to back up before downloading iOS 8.
The Macbook Pro that I will back up to has one user and one itunes library.
Is this possible without mixing up address books and contacts etc? Appreciate if some one could direct me to detail step-by-step instructions if they exist or please tell me how I can do this.
Thanks.

With Family Sharing they don't need to have the same Apple ID anymore.
But backups to iTunes are kept separate among multiple devices; Apple ID and iCloud isn't involved at all. Just make sure the devices do not have the same name.

How to Watermark multiple images with different dimensions in Photoshop ?

Is there any way that I can place a watermark on the right bottom of multiple images, no matter what dimension the images are? I have tried using Photoshop Scripts > image processor, but it works only for images of same dimension. I want to put watermark on multiple images of different dimensions. This is the output i got.
For the first image the watermark got placed correctly, but for the second image watermark got distracted. As you can clearly see the dimensions are different. Please suggest me some solution.

Open an image to watermark. We must have this open before we start recording an action or else it will keep opening this image and watermarking it over and over again.
In Photoshop go to Windows >> Actions
At the bottom of the Actions Palette you will see a little folder icon, click on it and create a new folder to hold you action in.
Once you have a folder to hold your action we need to hit the Create New Action button (next to the new folder Icon we just used.)
Give our new action a name and set a function key (if required.)
If the record button is not already depressed which it should be by default, hit it now to start recording our action. (located near the folder icon again but this time to the left)
Now that our action is recording go to File >> Place
When the dialog box comes up navigate to your previously created watermark file.
Hit the Place button
Position the watermark as you would normally have it (default is dead center) and hit enter.
Go to File >> Save as,navigate to where you want your watermarked images to finish up and hit save. DO NOT CHANGE THE FILE NAME if you do when you play the batch it will name all the files it saves the same over-writing each other.
Close the image we just watermarked.
when a save dialog comes up do not save the image.
On the Actions Palette hit stop recording.
Our Action is now recorded.
To process an entire folder of images we go to File >> Automate >> Batch
Select the folder in which your images are currently
Select the folder you wish to save the watermarked copies too.
Hit OK
Photoshop is now watermarking all the Images in the selected folder for you.

Multiple copies with different footer text --sapscripts

Hello I have a requirement where in i need to print multiple copies( customer, company, etc). On each copy different footer text is to be printed. Can anyone help me out. Thankyou helpful posts will be rewarded.

Hi,
If you have a need wherein the samrtform has to have data differ for each copy of a printout
eg. Different form title per every print copy.
then the following code should work.
case sfsy-copycount0.
When 000.
form_title = 'Order confirmation'.
when 001.
form_title = 'Warehouse ticket'
when 0002.
form_title = 'Customer ticket'.
endcase.
Remember, display the element 'form_title' in a window of type 'copies window'.
Reward if helpful.
Regards
Pavan.

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

How to go about multiple inclination with different data selection in Delta

We have to copy large amount of data ( more than 42lak of recodes) selectivly from on ODS to other ODS. in delata load ( BW 3.5 enverioment)
I thought of loading data in slices through delta loading with selection condition.
step 1> Do The initialization with selection condition as for calyear =2001 ( Init without data transfer )
step 2> Take the delta load .. it will take all delta record with same selection
step 3> Now I want to do Initialization with selection condition as for calyear =2002
step 4> take the delta now it will take delta for year 2001 and 2002 both Right ?
Here what problem I am facing.. while doing 2nd time initialization it prompt me to delete the last initialization request form scheduler menu.
if i delete the last request .. will it take the delta for previous initialization selection and new initialization selection. ?
Please advice how to go about multiple inclination with different data selection in delta loading.
Looking forward your reply.

Hi,
step 1> Do The initialization with selection condition as for calyear =2001 ( Init without data transfer )
step 2> Take the delta load .. it will take all delta record with same selection
step 3> Now I want to do Initialization with selection condition as for calyear =2002
step 4> take the delta now it will take delta for year 2001 and 2002 both Right ?
You are correct with this scenario normally. The message you mentioned normally comes up when you open a infopackage and don't change the selection first or in case you have overlapping selections with an already done init.
regards
Siggi

How do I send docs to multiple signators with different email addresses on Echo sign ?

How do I send docs to multiple signators with different email addresses on Echo sign ?

Thanks man...the problem could be on the signators side.
Rick Schell...Realtor, ABR
www.rick-the-realtor.com
Cell 615-804-3085
Crye-Leike Realtors
Office 615-373-3513
Fax 615-373-5228
Quoting Echosign-Rob <[email protected]>:
Echosign-Rob created
the discussion
"How do I send docs to multiple signators with different email
addresses on Echo sign ?"
To view the discussion, visit:
https://forums.adobe.com/message/6395941#6395941
>

How to remove multiple copies of plug ins in CS3 AE

Does anyone know how to remove multiple copies of certain plug ins from Adobe After Effect CS3 ?
I have Adobe Premier Pro CS3 instaled on same hard drive as AE CS3 , when i start my Adobe AE CS3, then when its loading, a warning message comes and says " you have mulitple copies of these plug ins , you must remove the multiple copies, else it might not function properly "
Thanks in Advanced !

Ok, thanks buddy
well, here is the situation
I use Windows XP
AE CS3 as well as premier Cs3
right at this point of time, i am upgrading the motherBD of my PC so i couldn't be more specific..once i installed the new BDs then i can give you more details..
all right, I have installed the trapcode and New Blue effect for both Premier and AE, the dublicate plug in is from New Blue , i guess its called "Essentials"
so, i went inside AE plug ins folder and located the "Essentials" plug in and removed the folder "Essentials" which contains the names of plug ins which i received them at the begining of the program.
but when i restart the AE , i don't get and error or warning signs anymore BUT when i try to look for the Essentials effect, where all the other effects are, i no longer see the plug in there, just like it was never installed to begin with...
when i goto Program Files>>Adobe>>Commen Files>> plug ins
then i see the Essentials plug ins there,
so basically i see the Essentials plug ins in 2 different locations.

Design a single template for multiple reports with different column order

Hi,
I need to migrate the existing reports from SQL Server Reporting Services to Crystal Report 2008, and the column order in the report is very important to the clients since clients have existing code to ingest these reports into their database. Now I want to create a single template with lot of parameters for all reports. My question is how I might use one template to create multiple reports with different column orders in the reports?
For example, client A has the following column order in their report: firstName, LastName, DateBirth, SSN. Client B has the following column order in their report: SSN, DateBirth, LastName, FirstName. Can I use one template to create these multiple reports?
Thanks in advance.

-As I mentioned you can find Template Field object in Insert menu of crystal report Designer 2008.
As soon as you select Template Field object you will be able to see a box beside ur mouse cursor. Drag and drop this box at required place. Now when you place this object in report you will get some thing like this "<TemplateField1>" listed under Formula Fields tree. Double click "<TemplateField1>" formula to add your conditions.
-I have not tested it for large amount of Customers. However as the number of customer increases the number of conditions will get increased.
For the customer that want the same ordering of columns you can put those customers under one condition.
    for Example...
          if(?Client in ['clientA','clientA']) then
                    <TableName>.<Field>......
-What do you mean be 40 columns? Do you mean 40 fields or you want to show 40 columns in report? Please elaborate.
Regards,
Amrita
Edited by: Amrita Singh on May 21, 2009 7:54 AM

LR3 - Questions regarding virtual copies with different exposures and Merge to HDR Pro in Photoshop

Hello,
I'm currently testing LR3. I have a master copy and 4 virtual copies with different exposures selected in LR3. I tought to myself that I could simply use the "Edit / In Merge to HDR Pro in Photoshop" option and tune the resulting HDR image in Photoshop but it seems that Photoshop doesn't take in consideration the exposure changes I've made on the virtual copies in LR3. The 5 images are identifical in the HDR Pro tool.
Is there something I can do to about it ? Maybe there is a step I've forgot in my workflow or something ?
Maybe I could simply export the master and virtual copies to JPEGs and then import these in the Photoshop HDR Pro tool but I don't think I would get the same results right ?
Thank you for your help.

Depending on the image ISO and overall content, you can get some pleasing DR pickup using this routine over simply hitting the fill light slider up and the exposure slider down. I never really liked the PS approach since it seemed to require too much tweaking inside PS. I have experimented with LR/Enfuse and Photomatix plug-ins and have settled on Photomatix for my HDR exposures (both "real" with multiple images and "fake" with a single image as you have described). I think LR/Enfuse is donation ware so you might want to start there. In both cases, the resultant image still needs a little adjusting back in LR after it is automatically imported into the Library.
Jeff

Why am I getting multiple copies of a single email?

I'm using Yosemite 10.10 on my mid-2012 iMac.
I've noticed that I'll often get multiple "copies" of the same email. E.g., this morning I received an email that was forwarded to me as a contact through one of my weblogs. In the Mail Inbox for the specific email account the same email appeared three times.
I've noticed this same behavior in other email Inboxes (different accounts) in Mail.
Any idea what's going on?

This may have to do with the server, what kind of email are you using, and is it a group email?
Can you please provide steps you are taking with a little more detail as well? It may be a known issue, but I do not know.
I look forward to your reply!

How to get multiple beep sound?

Hi
I want to get multiple beep sounds as output if a comparison condition gives output as true.
Can anyone tell me how to get multiple beep sound?
Solved!
Go to Solution.

You could make it more pleasant if you would play a different sound file based on the comparison. (look in the windows\media folder for the sounds used by the OS. Try e.g. c:\windows\media\tada.wav)
Very few people still communicate in morse code.
LabVIEW Champion . Do more with less code and in less time .

Help! iMovie isn't importing still photos properly. I get multiple copies of the same photo!

Hello all. iMovie is acting very ornery, and I need help -- or I'll never get my 2011 slideshow completed in time!
I am trying to import several still photos into my movie project. In the past, I have simply dragged and dropped the appropriate photos from the iMovie photo browser into my project. Everything works — the way it should be with Apple products.
Suddenly, iMovie doesn't want to play nice. No matter what photos I drag into the timeline, iMovie inserts multiple copies of one of the video clips that's already in my movie. The photos don't show up. If I play the movie, I get a blank screen where the photo/video should be.
Is anyone else experiencing this probem? Is there an easy way to fix it?
The following picture and text should help explain what I'm doing:
Here are the steps I'm taking:
1. I select one or several photos from the iMovie photo viewer (on the bottom right-hand side of the window.) -- In this case, I've selected 10 very different photos.
2. I drag the photos into the project.
3. iMovie appears to import the photos.
4. I see 10 identical thumbnails in my project. They appear to be the same as the very last video clip in the project. However, when I scrub these thumbnails, or play the movie, I see a black screen.
I've tried dragging the photos directly from iPhoto, or from the desktop, and still the same thing happens.
HELP!
Dave

Thanks wesehrt. I had one jpeg such as "ALL_CAPS.jpeg" --- straight from my iPhone, imported/tweaked in Aperture no less ... and renamed it without the underscore and it worked.
But I wasn't getting multiple copies or black screens. The image would import and I'd see the thumbnail in the project timeline, but what actually rendered was the last frame of the preceding video clip.
Bizarre bugs with photos importation here.

How to get multiple copies with different decription on header line

Similar Messages

Maybe you are looking for