How to get multiple takes on one track?

Using the latest version of GarageBand, how can I get multiple takes of a vocal, for example, on one track and then select the best one?

See this support article:
Record multiple takes:  http://help.apple.com/garageband/index.html#gbnda1184253

Similar Messages

  • Which file is Logic playing with multiple takes on one track?

    This should be an easy one, but I don't even know how to look it up here or in the Logic manual.
    When you record multiple takes on one audio track, and in the arrange window they are stacked up one on top of the other, which one is Logic playing when you've muted nothing? When each track is the same performance it's impossible to tell because the waveforms stop and start at the same time, and the meters in the arrange window show all takes playing. I'm hearing only one take at a time though and through soloing, muting, and splitting into regions I can usually figure out which one is coming through but there's got to be an easier way to tell.
    Related question, is there anyway to force Logic to play one take all the time except for the muted regions when you want other takes to be playing? Or do I have to keep muting the regions I don't want to hear?
    Any help is greatly appreciated.
    -Marek
    Powermac G5   Mac OS X (10.4.5)  

    The one whose event is latest in the event list - it will enter when the region begins. Therefore, the anchor and region adjustments in the sample editor can affect who plays when.
    Master the mute tool and mute tracks - also assign a KC to mute regions and tracks. It's actually really snappy to make a comp and fly through regons and folders when you have done it for a while.
    J

  • How to get multiple photos as one clip in imovie?

    i have 13 school photos that i want to include in an imovie slideshow project. i wanted them to scroll from left to right, but can't seem to get them all in one clip. is there a way to do this? i found a way to do it by adding all 13 pictures into one photo using photobucket, but when i import that massive photo into imovie, it is such poor quality that it isn't worth it. please help. i'm going crazy over here.

    In that case, I have never done this before, but here is how I would approach it.
    In Photoshop, or similar app, I would create a photo that is 1080pixels high or bigger and wide enough to hold all pictures.
    I would place all photos in here and export as a single photo.
    In iMovie, I would set the image to Ken Burns, with the starting rectangle on the first photo, and the ending rectangle on the last photo.

  • How to get multiple elements into one element as multiple occurences

    I can't figure out how to do this. I have an input message that has multiple elements and I need to take those elements and copy them into one element with each new element going in as a new occurence or instance. For example
    I have this input under one parent node.
    element1
    element2
    element3
    element4
    and this is the output I need
    Node
    Element1[0]
    Element2[1]
    Element3[2]
    Element4[3]
    The input XML looks like this
    Payload
    Element1
    Element2
    Element3
    and the output XML needs to look like this
    Payload
    Element.
    Thanks in advance

    How about this.
    Input XML:
    <Row>
              <Column1>TOTAL</Column1>
              <Column_9_2_2008>900</Column_9_2_2008>
              <Column_9_2_20082>890</Column_9_2_20082>
              <Column_9_3_2008>52</Column_9_3_2008>
              <Column_9_4_2008>0</Column_9_4_2008>
              <Column_9_4_20082>0</Column_9_4_20082>
              <Column_9_5_2008>0</Column_9_5_2008>
              <Column_9_5_20082>0</Column_9_5_20082>
              <Column_9_8_2008>0</Column_9_8_2008>
              <Column_9_8_20082>0</Column_9_8_20082>
              <Column_9_9_2008>0</Column_9_9_2008>
              <Column_9_9_20082>0</Column_9_9_20082>
              <Column_9_10_2008>0</Column_9_10_2008>
              <Column_9_10_20082>0</Column_9_10_20082>
              <Column_9_11_2008>0</Column_9_11_2008>
              <Column_9_11_20082>0</Column_9_11_20082>
              <Column_9_12_2008>0</Column_9_12_2008>
              <Column_9_12_20082>0</Column_9_12_20082>
              <Column_9_15_2008>0</Column_9_15_2008>
              <Column_9_15_20082>0</Column_9_15_20082>
              <Column_9_16_2008>0</Column_9_16_2008>
              <Column_9_16_20082>0</Column_9_16_20082>
              <Column_9_17_2008>0</Column_9_17_2008>
              <Column_9_17_20082>0</Column_9_17_20082>
              <Column_9_18_2008>0</Column_9_18_2008>
              <Column_9_18_20082>0</Column_9_18_20082>
              <Column_9_19_2008>0</Column_9_19_2008>
              <Column_9_19_20082>0</Column_9_19_20082>
              <Column_9_22_2008>0</Column_9_22_2008>
              <Column_9_22_20082>0</Column_9_22_20082>
              <Column_9_23_2008>0</Column_9_23_2008>
              <Column_9_23_20082>0</Column_9_23_20082>
              <Column_9_24_2008>0</Column_9_24_2008>
              <Column_9_24_20082>0</Column_9_24_20082>
              <Column_9_25_2008>0</Column_9_25_2008>
              <Column_9_25_20082>0</Column_9_25_20082>
              <Column_9_26_2008>0</Column_9_26_2008>
              <Column_9_26_20082>0</Column_9_26_20082>
              <Column_9_29_2008>0</Column_9_29_2008>
              <Column_9_29_20082>0</Column_9_29_20082>
              <Column_9_30_2008>0</Column_9_30_2008>
         </Row>
    Output XML:
    <Total>
              <Payload>900</Payload>
         </Total>
         <Total>
                   <Payload>890</Payload>
         </Total>
         <Total>
                   <Payload>52</Payload>
         </Total>

  • How to get multiple rows at one time in a table?

    hi
    I have a JTable bound with ViewObject and i use multiple selection mode setting to get selection row.
    My question is when i select more then one row at one time i only can get those index from JTable but can't get those rows from ViewObject.is it possible to get rows from ViewObject? or how to use JTable row index to get row from ViewObject?

    repost

  • How to get multiple records in one row and different column

    Hi All,
    I am using oracle database 11g
    and i have a two tables table_1, table_2
    table_1 having columns
    emp_no
    first_name
    middle_name
    last_name
    email
    and table_2 having columns
    emp_no
    phone_type
    phone_number
    and having entires
    emp_no phone_type phone_number
    1001 MOB 9451421452
    1001 WEMG 235153654
    1001 EMG 652341536
    1002 MOB 9987526312
    1003 WEMG 5332621456
    1004 EMG 59612356
    Now i want the output of values with phone type as MOB or WEMG in a single row with different columns
    emp_no first_name middle_name last_name email mobile officeno
    1001 mark null k [email protected] 9451421452 235153654
    1002 john cena gary [email protected] 9987526312 null
    1003 dany null craig [email protected] null 5332621456
    1004 donald finn sian [email protected] null null
    can i have any inputs to achive this???
    Regards
    $sid

    Frank Kulash wrote:
    sonething like this:Frank, you missed aggregate function (pivot requires one). However main thing is it will cause ORA-01748:
    with table_1 as (
                     select 1001 emp_no,'mark' first_name,null middle_name,'k'last_name,'[email protected]' email from dual union all
                     select 1002,'john','cena','gary','[email protected]' from dual union all
                     select 1003,'dany',null,'craig','[email protected] null' from dual union all
                     select 1004,'donald','finn','sian','[email protected]' from dual
         table_2 as (
                     select 1001 emp_no,'MOB' phone_type,9451421452 phone_number from dual union all
                     select 1001,'WEMG',235153654 from dual union all
                     select 1001,'EMG',652341536 from dual union all
                     select 1002,'MOB',9987526312 from dual union all
                     select 1003,'WEMG',5332621456 from dual union all
                     select 1004,'EMG',59612356 from dual
    SELECT     *
    FROM     table_1      t1
    JOIN     table_2      t2  ON  t1.emp_no = t2.emp_no
    PIVOT     (    max(t2.phone_number)
         FOR  t2.phone_type  IN  ( 'MOB'   AS mob
                                 , 'WEMG'  AS wemg
            FOR  t2.phone_type  IN  ( 'MOB'   AS mob
    ERROR at line 19:
    ORA-01748: only simple column names allowed hereYou need to:
    with table_1 as (
                     select 1001 emp_no,'mark' first_name,null middle_name,'k' last_name,'[email protected]' email from dual union all
                     select 1002,'john','cena','gary','[email protected]' from dual union all
                     select 1003,'dany',null,'craig','[email protected] null' from dual union all
                     select 1004,'donald','finn','sian','[email protected]' from dual
         table_2 as (
                     select 1001 emp_no,'MOB' phone_type,9451421452 phone_number from dual union all
                     select 1001,'WEMG',235153654 from dual union all
                     select 1001,'EMG',652341536 from dual union all
                     select 1002,'MOB',9987526312 from dual union all
                     select 1003,'WEMG',5332621456 from dual union all
                     select 1004,'EMG',59612356 from dual
         table_3 as (
                     select  t1.emp_no,first_name,middle_name,last_name,email,
                             phone_type,phone_number
                       FROM     table_1      t1
                       LEFT JOIN     table_2      t2  ON  t1.emp_no = t2.emp_no
    SELECT     *
    FROM     table_3
    PIVOT     (    max(phone_number)
         FOR  phone_type  IN  ( 'MOB'   AS mob
                                 , 'WEMG'  AS wemg
        EMP_NO FIRST_ MIDD LAST_ EMAIL                     MOB       WEMG
          1004 donald finn sian  [email protected]
          1003 dany        craig [email protected] null            5332621456
          1001 mark        k     [email protected]      9451421452  235153654
          1002 john   cena gary  [email protected]    9987526312
    SQL>SY.

  • How do I make separate tracks into takes in one track?

    I want to know how to use quick swipe comping on separate tracks. If not possible, how do I merge those separate tracks as takes in one track so I can use quick swipe?
    I am using logic pro X and finding comping very slow when trying to comp multi tracks.

    Lasso-select (in one swoop) and/or cmd-select (one by one) all regions you want to include into the take folder, then control-click any of them and choose Pack Take Folder from the contextual menu.
    http://help.apple.com/logicpro/mac/10/#lgcpb194093e

  • User  getting multiple labels in one copy instead of one label.how to solve this issue?

    user getting multiple labels in one copy instead of one label.
    The detail is unexpectedly prints several labels.The amount is variable, may be 10 or 20 such tags.
    any solution for the above issue?

    Hi sriram,
    may i know,Adjusting the SAPscript form will resolve the issue?
    device details:
    access method is "S"
    Thanks,
    Prasad.

  • How to use multiple ipods on one account

    I have an Ipod classic and just bought my sons two nano's how do I use these on the same account without changing my account info?

    Take a look here:
    How to use multiple iPods with one computer
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
    Regards.

  • How to execute multiple queries in one stored procedure.

    Hi,
    I am Kumar,
    How to execute multiple queries in one stored procedure.
    here is the my requirements,
    1. get the max value from one table and sum of the that value.
    2. insert the values and also sum of the max value.
    using stored procedure
    I am using SQL server 2000 database.
    Please help me.
    Advance thanks
    by,
    Kumar

    This is not a java question and it is not even a problem: your only problem is
    1) lack of knowledge
    2) lack of interest to find a manual
    But you are going to have to change both by actually reading a book or a manual that explains the stored procedure language of SQL Server. It is the same as Sybase I think, so you could also look for a manual for that DBMS.

  • How to get multiple records using fn-bea:execute-sql()

    Hi,
    I created Proxy service(ALSB3.0) to get records from DB table. I have used Xquery function(fn-bea:execute-sql()). Using simple SQL query I got single record, but my table having multiple records. Please suggest how to get multiple records using fn-bea:execute-sql() and how to assign them in ALSB variable.
    Regards,
    Nagaraju
    Edited by: user10373980 on Sep 29, 2008 6:11 AM

    Hi,
    Am facing the same issue stated above that I couldnt get all the records in the table that am querying in the Proxyservice.
    For example:
    fn-bea:execute-sql('EsbDataSource', 'student', 'select Name from StudentList' ) is the query that am using to fetch the records from the table called StudentList which contains more than one records like
    Id Name
    01 XXX
    02 YYY
    03 ZZZ
    I tried to assign the result of the above query in a variable and while trying to log the variable, I can see the below
    <student>
    <Name>XXX</Name>
    </student>
    I want to have all the records from my table in xml format but it's not coming up. I get the value only from the first row of my table.
    Please suggest.
    regards,
    Venkat

  • How do you copy automation from one track to another?

    How do you copy automation from one track to another? Occassionally I mistakenly blow away a track's automation. I open up an earlier version of the song to try to get the automation. It doesn't seem that you can copy and paste the data. After some struggle, I find a way. Is there an easy way?

    1. Copy the track containing the desired automation to another track. (create a track below it to keep things organized)
    2. Double click on the region and delete the notes.
    3. Now copy the region to the desired track.
    P.S. Of course when Logic asks if you want to copy the automation data you say yes)

  • Im trying to make a poster size collage of pictures and also want to put a story in the middle of the poster. I just can't understand how to get multiple pictures and how to arrange them around the poster?

    Im trying to make a postersize picture collage and I don't know how to get multiple pictues arranged. Someone said I can use the layer option. But Im just not getting it. Please help!

    Click File >> Open and select all of your photos
    That will add them to the project bin
    Then select File >> New >> Blank File
    Select background color White (or whatever you prefer) and add your width and height for your final image (set resolution 72 for web usage or 240 to 300 for printing) then click OK
    In the project bin click your first photo and drag it up into the main window on top of your new background.
    Click on the move tool and click in the center of the photo and drag to arrange it where you want on the background - you can hold down the shift key to maintain original proportions whilst dragging the corner handles of the bounding box to get the size you want.
    Do the same with the next photo (drag it up into the main window) and use the move tool to position it. Then continue with each image.
    Finally Click Layer >>Flatten image and save as jpeg. (Save as PSD if you want to preserve the layers for editing again)
    N.B. as you add images they get dropped in the center. So you need to use the move tool to drag them apart. Click in the middle of one and move it around, and then the others until you get them positioned as you want.
    When you click again with the move tool a bounding box appears around the image and you can drag out the corner handles to re-size your photos. Hold down the shift key when dragging the corner handle and that will maintain the proportions of the original.
    Finally click Layer >>Flatten Image and save your collage - you may then want to use the crop tool to cut away any surplus white canvas, and then re-save. Click the T tool to add text.

  • How to get Multiple FLV duration?

    How to get Multiple FLV duration in single shot?.  Am using Netstream concept.

    I have more flv files and taking it via XML. I want to play the multiple flv video in single timeline. For that i need duration of multiple flv in for loop. Is it possible to take without metadata?

  • How to get multiple selected fields in list

    Hello all,
    I am trying to get multiple selected value from a list but i dont know how to get multiple selected fields from a list though AS3.
    Actually i want to pass the selected fields to php, so for that i need to get the selections and send to php.
    Thankx..

    i want to put the selected fields of list in an array through AS3....
    actually......i figured it out how to do that...........
    Its simple......use
    list.selectedItems[index]
    and to get the number of items selected......
    list.selectedItems.length
    simple.....

Maybe you are looking for