How to get my 2nd display showing window it was displaying before re-plugin

When at my desktop, I work with both my notebook display and another one.
When I unplug the 2nd display (eg: to take my notebook to a meeting) and later plug in it back, I have to drag the windows from notebook display to 2nd display again.
Do you know an option I should set so windows position are remembered and set again ? It would be very very useful for me !!
Or should I report a request for enhancement ?...
Thanks a lot
Best regards

I think the problem comes when you remove the second display, you shrink the extended desktop back to its one-display size. I expect that is similar to what would happen if you changed the resolution on one display alone to something really small, like 640 by 480.
The Mac OS does not want to leave windows in an area that is off the desktop, because they would be completely inaccessible. So it moves them back to the nearest edge of the redefined desktop. I think this is the same phenomenon that leaves the OS 9 Trash can floating in mid screen (rather than near the bottom right) after a screen resolution change.
This sounds like a classic unsolved problem.

Similar Messages

How to get the values from popup window to mainwindow

HI all,
   I want to get the details from popup window.
      i have three input fields and one search button in my main window. when i click search button it should display popup window.whenever i click on selected row of the popup window table ,values should be visible in my main window input fields.(normal tables)
   now i am able to display popup window with values.How to get the values from popup window now.
   I can anybody explain me clearly.
Thanks&Regards
kranthi

Hi Kranthi,
Every webdynpro component has a global controller called the component controller which is visible to all other controllers within the component.So whenever you want to share some data in between 2 different views you can just make it a point to use the component controller's context for the same. For your requirement (within your popups view context) you will have have to copy the component controllers context to your view. You then will have to (programmatically) fill this context with your desired data in this popup view. You can then be able to read this context from whichever view you want. I hope that this would have made it clear for you. Am also giving you an [example|http://****************/Tutorials/WebDynproABAP/Modalbox/page1.htm] which you can go through which would give you a perfect understanding of all this. In this example the user has an input field in the main view. The user enters a customer number & presses on a pushbutton. The corresponding sales orders are then displayed in a popup window for the user. The user can then select any sales order & press on a button in the popup. These values would then get copied to the table in the main view.
Regards,
Uday

How to get rid of the command window....

How to get rid of the command window, automatically, once the .bat file which execute the .jar has been executed?
Znx

If you don't want the command window to show, use:
javaw yourClass
instead of...
java yourClass

How to get Caps lock indicator in windows 8.1

How to get Caps lock indicator in windows 8.1 ???
i am using wireless keyboard KG 1061

Hi bhargav0,
I understand you would like a caps lock indicator in Windows 8.1. I admit, I don't know of any fix that simply shows you on the screen, but there is an auditory warning that you can implement if that would be of help to you. Take a look at the following video, Windows® 8.1: Make the Caps Lock key beep when pressed. I hope this will be of use to you. Have a great day.
Ryan1216
I work on behalf of HP
The advice and opinions given here are my own and not those of HP

I just got a new iPad air and also own an iPhone 5. I'm receiving most of my text messages on the iPhone, but some but not all are also showing up on my iPad. I don't want them on my iPad, any suggestions on how to get them to stop showing up n my iPad?

I just got a new iPad air and also own an iPhone 5. I'm receiving most of my text messages on the iPhone, but some are now also showing up on my iPad. I don't want them on my iPad, any suggestions on how to get them to stop showing up n my iPad?

Go to settings>messages>send and receive at>you can be reached by iMessages at> Uncheck your phone number and you can select your Apple ID emal address if you want to use that for messages.

How to get carrier company name on windows phone 8.1?

how to get carrier company name on windows phone 8.1?

excuse me, i referrer the link http://stackoverflow.com/questions/26973111/get-carrier-name-cellular-mobile-operator-name-using-windows-phone-8-1 to
modify my universal app.
but i always get 0 count from the GetNetworkNames() method.
if my sim card is for 3G, but i setting 4G in highest connection speed. i got the "the pipe is being closed".
how can i solve the problem? thank you.

HELP!! How to get the position of active windows in the desktop

How to get the position of active windows in the desktop

You mean, active windows other than the program you're running, or windows the program puts there? And a real desktop (like where MyComputer is), or a desktop pane?

HT1589 This doesn't work in Windows 8. Anybody know how to get this dialog box in Windows 8?

This doesn't work in Windows 8. Anybody know how to get this dialog box in Windows 8?

Hello,
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you.

How to get i cloud to show phone numbers and not emails

how to get i cloud to show phone numbers and not emails

In the contacts app the information is as you have entered it. You can include the added information you want for the contacts. Open a contact and tap edit and add the information you want there and then tap done. It soulds to me like Facebook friends who have email addresses only have been merged into your contacts

Alter a BAPI Result Table, how to get into the display "loop" ?

Hello all,
i have a problem regarding the result rows of a RFC/BAPI Call.
There are three views, let's say 1,2,3. In View 1, i call a BAPI, and display the results in a table in View 2. I added a button in each row, which calls View 3 and displays some details concerning the selected row.
I now want to store a flag for each row, that has been displayed in this way.
In View 3 i store the key value of the displayed row in an own value node in the context.
When i go back from View 3 to View 2, i want to see that flag (in an extra column) in every row, that has been selected in this session.
So i do not know, how to alter a single row in the BAPI result table, how to get into the "loop" that is used by WD to display the table.
already tried a supply function, but i was not able to alter single rows.
Any suggestions/tips or perhaps code fragments of working supply functions ?
Thank you !

Hello,
I'm not sure whether I understood your problem correctly, but I will try to give an answer.
The easiest way I see is to copy the RFC Results to a Component Controller Context structure with an additional Flag field. You can use WDCopyService for copying.
Then on the event of selecting you set your flag as appropriate for you (e.g. if you want to use an image as flag you set the Image path) on the current element of your table. Then display View 3.
On going back View 2 should show now the new flag values...
The trick is to copy the values (as at Time structures can not be expandend with new fields) and set the Flag on the onSelect event.
Hope this helps,
Frank

TS3212 how to get 64 bit itunes on windows

how to get 64 BIT TUNES ON WINDOWS

lo**** wrote:
My problem is that my registry only shows one ORACLE_HOME--the 64-bit full install whereas Cognos reqs to point to 32-bit client. The env/reg variables probably do exist/show, only in the right place. In Win 64-bit, there's a separate branch of reg entries for 32-bit (look for WoW6432Node).
>
... whereas the 32-bit client sqlplus (D:\oracle\client\app\dock\product\11.2.0\client_1\BIN\sqlplus.exe) does not work. The error is:
ORA-12560: TNS:protocol adapter errorIt works as expected. Since there is no Oracle instance in the Client home (no surprise), you can't connect "locally" from the 32-bit sqlplus. I.e. you need to use "...@connectident" in the connect string.
In order to fix Cognos, I changed my ORACLE_HOME and path to point to the 32-bit client (i.e. from D:\oracle\app\dock\product\11.2.0\dbhome_1 toOn Windows platform, ORACLE_HOME should not be set by user (it is already set by installer, in the Registry).
To pick up proper settings, PATH need to be set or used.
>
Sooooo, I think I need to set the OH and PATH back to the 64-bit as that is what the Listener requires but any ideas how to get the 32-bit sqlplus to also work?!?Please remove OH from env system settings.
Multiple homes on Windows is often a source of problems, since extra consideration and setup is needed more than just installing the software.
If "Cognos" relies on system PATH, then one way to go might be:
- put path to 32-bit Client bin folder first in PATH
- set up a shortcut to command window with only 64-bit in PATH, for times when you need to administer the database via command line.

How to get IPv6 site prefix via Windows API?

Hello,
we need urgent help. We have to automatically configure a postgres sql server. For this reason we need to determine the IPv6 site prefix. Using windows command line this is pretty easy:
netsh interface ipv6 show siteprefix
We are only interested in the site prefixes themselves, e.g. no lease time is needed. We want to get this information via Windows API.
For this purpose we use GetAdaptersAddresses function. Within the result of
FirstPrefix the needed information is included. But it's much to much information and it's not clear for us how to filter the result. We need always
exact the same result like the command above produces.
Any help or hint would be very very appreciated.
Greg

Hi Valery,
I mean a Portal Resource..
Inside portal, when a go to properties of a specific document, in tab "Access Link" it shows a "Short Id".
I'd like to know via API how to get this Id, or any other Code that it's unique for every resource or document in portal.
Thank you!

Don't know how to get album covers to show

I just got a 30gb iPod and want to know how to get the album covers to show when i play the song that the album relates to. I read something about using iPhoto but I have a PC. Can someone please tell me how to do this?

I have the albums on the songs in itunes
You put the album cover on the song file in iTunes?
the album pics are in the photos section of my ipod
This does nothing for displaying the cover on the iPod while it's playing.
i also checked to display album artwork from itunes
Uncheck it and then recheck it .
Are you using Manual or Auto update?

How to get OpenGL 2.0 on Windows 8 ? I need to use it.

I need to use OpenGL 2.0 or Higher because I get some appication. But this appication show error windows "Current OpenGL version 1.1 is too low, 2.000000 expected". So I want to get OpenGL version 2.0 or Higher. How to
get it ?
Please answer me, Thanks.

Use this procedure
http://hqtips.com/pc/windows/how-to-fix-opengl-error-on-windows-8/
http://indonetworksecurity.com/windows/fix-opengl-error-in-windows-8.htm
Rgds
Milos

How to get webservice data to show in tree?

I have a webservice that returns an xml document. i cant get it to display in the tree the right way. here's my code:
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="vertical">
    <mx:Script>
        <![CDATA[
            import mx.rpc.events.ResultEvent;
            import mx.collections.XMLListCollection;
            default xml namespace = "http://tempuri.org/";
            [Bindable]
            private var mydata:XMLListCollection = new XMLListCollection();
            private function resultTree(event:ResultEvent):void{
                mydata.source = new XMLList(new XML(event.result[0]));
        ]]>
    </mx:Script>
    <mx:WebService id="ws1" wsdl="http://129.81.119.89:8081/service1.asmx?WSDL"
        showBusyCursor="true" useProxy="false">
        <mx:operation name="HelloWorld" result="resultTree(event)" resultFormat="e4x" />
    </mx:WebService>
    <mx:Tree id="tree1"
        initialize="ws1.HelloWorld.send()"
        dataProvider="{mydata}"
        labelField="@label"
        height="500" width="500">
    </mx:Tree>
</mx:Application>
here's the returned data
<HelloWorldResponse xmlns="http://tempuri.org/" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<HelloWorldResult>
    <root label="Home Node">
      <node1 label="Parent 1">
        <node2 label="Child 1"/>
      </node1>
      <node1 label="Parent 2">
        <node2 label="Child 1"/>
      </node1>
    </root>
</HelloWorldResult>
</HelloWorldResponse>
Here's what the tree looks like (notice the first 3 nodes are showing the entire xml and the last 2 nodes are exactly what i want to show):
I think i have all the right code but am not sure how to assign the mydata variable the correct output from the service. Am I handling the namspace correctly?

I wouldnt use an XMLListCollection. I'd just make it XML. Like this:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" xmlns:local="*">
     <mx:Script>
          <![CDATA[
               [Bindable]var hello:XML = <HelloWorldResult><root label="Home Node"><node1 label="Parent 1"><node2 label="Child 1"/></node1><node1 label="Parent 2"><node2 label="Child 1"/></node1></root></HelloWorldResult>
          ]]>
     </mx:Script>
      <mx:Tree id="tree1"
        dataProvider="{hello.children()}"
        labelField="@label"
        height="500" width="500">
    </mx:Tree>
</mx:Application>

How to get my 2nd display showing window it was displaying before re-plugin

Similar Messages

Maybe you are looking for