How To Get My Recovery Partition as i got by default

Product : HP dv7-4071nr
OS : Windows 7 Home
I had made Partition of My C Driver into 2 partition and My Recovery Partition is unaffected. Now I tried To install WIndows 8 Pro and its successfully installed.
Now My Problem is My Recovery Drive (D is as usaual it shows Free and used Size of drive But when i click to show inside drive is Shows dirve is Emptly.
Then after i Installed Windows 7 Home as its was come with factory. and register my windows 7 but still i am not getting Recovery drive as i got be default.
Can You please help me ?
How can i get recovery drive as default and recover to original Factory Installation ?

When you first setup your computer, your should have created a set of Recovery Discs as recommended by HP. If your computer is still functional and the recovery partition (D: drive) is still intact, you can attempt to set to the "D:" drive as "Active" using the Windows Disk Management console and rebooting the computer. If you are lucky the HP Recovery Manager will boot and guide you through recovering your computer to a factory like state.
If not, you will need to order a set of HP Recovery Discs from HP or third party vendor ComputerSurgeons.com
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Similar Messages

  • I've tried safe mode but I dont understand what is happening. I tried pressing the power button on and off for several times and nothing happens, I'm always stuck on an apple logo and a spinning wheel. I dont know how to get to the Partition and the DiskU

    I've tried safe mode but I dont understand what is happening. I tried pressing the power button on and off for several times and nothing happens, I'm always stuck on an apple logo and a spinning wheel. I dont know how to get to the Partition and the DiskUtility. The Apple Logo and the Progress Indicator will continue to spin and I have literally no idea what to do. i am in desperate need of help. help me pls

    Turn it off.
    Start it up again and (at the sound of the chime) press and hold the command and the R keys, hold them down until Recovery loads. When it does you will select Disk Utility and you should be on the First Aid tab when it opens, if you are not please select it. Then select the partition (in the side bar, 2nd entry on the list, see picture).
    Yours is probably called Macintosh HD.
    Once you have selected it go to the lower righthand corner of the First Aid dialog and press Repair Disk.
    This will take 10 minutes approximately. Post back when it is finished and tell me what it says.

  • I've tried safe mode but I dont understand what is happening. I tried pressing the power button on and off for several times and nothing happens, I'm always stuck on an apple logo and a spinning wheel. I dont know how to get to the Partition

    I've tried safe mode but I dont understand what is happening. I tried pressing the power button on and off for several times and nothing happens, I'm always stuck on an apple logo and a spinning wheel. I dont know how to get to the Partition and the DiskUtility. The Apple Logo and the Progress Indicator will continue to spin and I have literally no idea what to do. i am in desperate need of help. help me pls

    Reboot hold the command R for recovery.

  • Help!!! How to get the recovery time of transient response of a power supply with Labview basic package without analysis option?

    How to get the recovery time of transient response of a power supply with Labview basic package without analysis option? Does anyone have any idea or some similar function SUBVIs?
    Recovery time of transient response is defined as the time from the beginning of the transient to the voltage point on the waveform fallen into 10percent of the overshoot. Well, the waveform is something like a pulse with a soft slope.

    I recommend plotting your data on a graph on paper. Take a look at the data, and determine what is unique about the point you are looking for. Look for how you can teach your program to look for this point.
    I have written several algorithms that do similar, one in fact being for a power supply, the other being for RPM. Neither algorithm used any advanced analysis tools. They are just a matter of determining, mathematically, when you achieve what you are looking for. Just sit down with your graph (I recommend multiple copies) and draw horizontal and vertical lines that determine when you get to the point you are looking for. You are probably going to have to reverse the array and start from the end, so think in those terms.
    If you have trouble, emai
    l me a bitmap of the graph, and what you are looking for and I will try to be of further assistance. Don't do that however; until you you have given this a few tries. Your solution should be involve a lot of logic on analog levels.
    Good luck

  • How to recover the recovery partition after delete all hard disk partitions

    hallo
    how to recover the recovery partition after delete all hard disk partitions in toshiba satellite pro c850-1fn ?
    note that : I did not work recovery disc or usb to my laptop.
    I have need of your help.

    Satellite Pro C850-1FN (PSCBXE-01700EEN)
    Restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. All of the original partitions will be restored, including the recovery partition.
    If no recovery discs were created, you can obtain them from Toshiba.
       Toshiba Europe Backup Media Online Shop
    For instructions, see the section Restoring the pre-installed software from your created Recovery Media on p. 4-18 of the User's Manual (attached).
    -Jerry

  • How to install a recovery partition

    After installing 10.10.1 - 14B25 I no longer have a recovery partition.  The OS X 10.10.1 works fine but I am lost on how to add a recovery partition.  Some help on how to after the fact create an OS X 10.10 .1 recovery partition will be appreciated.   I failed to save the 10.10 installer

    BINGO....  I downloaded the full installer 5 GB and ran it over my 10.10.1 Macintosh HD with no Recover Partition.  Bingo, I now have my primary HD back with an updated 10.10.1 Recover Partition
    Kappy,
    I though your assessment was correct; however, it worked for me and I did NOT have to erase my Macintosh HD
    All is well again and it was a time consuming learning experience and I now have a 10.10.1 Recovery Partition

  • Satellite U400 - How to get back formatted partition with HDD Recovery

    Hello,
    I have bought a new Satellite U400 notebook with Vista Home preinstaled on it.
    I went throught initial configuration and after it has been done I realised that HDD partitions do not suits my needs.
    So I resised the "Vista" partition (acctually I have shrinked it) and made the "Data" partition bigger.
    I did not do anything with hidden partition.
    Unfortunately when I did this procedure I formated the "Data" partition.
    Now when I want to make backup DVD with TOSHIBA Recovery Disc Creator I got the error message saying that it is not possible because I have formated the "Data" partition.
    Are there any suggestion how to solve this error?
    The system goes fine, the only thing is that I am not able to backup and restore OS.
    Thanks Vecerka

    Another possibility besides getting yourself a new copy of recovery DVD is, that you could use 3rd party programs to make an image or backup of your actual system.
    I think Norton Ghost or Acronis TrueImage are good programs, but I only used last named one, so can't tell if Norton tool is equal to Acronis.
    And if you do not want to order recovery disc online, you always can visit your local ASP for doing this job for you. ;)

  • How to restore a Time machine backup and get a recovery partition?

    Hi,
    I'm quite confused!
    I restored from a Time Machine backup and then setup boot camp (and removed that partition a while back) and now I don't have a recovery partition. (Can't enable File Vault and
    bash-3.2# diskutil list /Volumes/Macintosh\ HD
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *120.0 GB   disk0
       1:                        EFI                         209.7 MB   disk0s1
       2:                  Apple_HFS Macintosh HD            87.4 GB    disk0s2
    My new MacBook Pro didn't come with any CDs.
    Apparently I need the recovery partition to reinstall Lion from the internet.
    "Recovery HD offers on-disk recovery tools, allows you to restore from Time Machine backups, reinstall OS X Lion over the Internet..."
    The recommended solution from Apple seems to be reinstall with your OSX 10.6 CD (which I don't have) and then upgrade to Lion (which seems like a PITA).
    Info from : http://support.apple.com/kb/HT4649
    What process should I follow to restore my recovery partition and apply the current state of the machine from a backup?
    (the process should not involve anything I don't have, like USB memory sticks, Lion CDs, etc....)
    Supplementary questions which are only relevant if the answer is "you can't" (which would seem to be a major bug!) :
    Or is there a clever method to install a recovery partition onto an existing disk (which clearly has space for it)? I have searched for it but all the results I found have either not mentioned that it works without reinstalling but look like it's needed, or do say "reinstall".
    If I install Lion to an external disk, can I boot from that and use the recovery disk assistant tool to restore the partition to my internal disk? (Which I assume I'll need to do to get FileVault to work) ?
    Thanks,
    Max

    Maxs-MacBook-Pro:Applications max$ diskutil list
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *120.0 GB   disk0
       1:                        EFI                         209.7 MB   disk0s1
       2:                  Apple_HFS Macintosh HD            87.4 GB    disk0s2
    /dev/disk2
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:     Apple_partition_scheme                        *136.2 MB   disk2
       1:        Apple_partition_map                         30.7 KB    disk2s1
       2:         Apple_Driver_ATAPI                         2.0 KB     disk2s2
       3:                  Apple_HFS Recovery Disk Assistant 136.2 MB   disk2s3

  • How do I get the Recovery partition onto a DVD set from my solid state drive?

    My Pavilion dv6 has only a solid state drive. I need to recover and reuse the 23  gb  currently partitioned for recovery. To do this I need to move the recovery files off the drive.  Can this be done?  Where do i find instructions on how to do it?
    Thanks,
    Bill Wright

    txi wrote: My Pavilion dv6 has only a solid state drive. I need to recover and reuse the 23  gb  currently partitioned for recovery. To do this I need to move the recovery files off the drive.  Can this be done?  Where do i find instructions on how to do it? Thanks, Bill Wright
    Hello txi, Your best bet would be to use a hard drive image program and perform a complete hard drive image.
    If you have Windows 7 on the SSD this would include the System partition, the C: partition and the D: Recovery partition.
    The D: Recovery requires some data from the Master Boot Record (MBR) in order to be accessed.
    Just trying to copy the data from the Recovery partition would not be successful if you wanted to use this data later.
    By making a hard drive imgae of the entire hard drive, and saving this image on an external hard drive, or a large enough USB drive, you could then delete the D: partition and expand the C: partition to recover the D: partition capacity.
    Then if you need to revert back as the system was when the hard drive image was created, the D: partition would be put back on the SSD.
    Please click the White Kudos star on the left, to say thanks.
    Please mark Accept As Solution if it solves your problem.

  • How i get the recovery key

    how can i get a recovery key??

    OK.  So you say you have a MBP and Mountain Lion.  You want to reinstall Mountain Lion, but the installation is failing.
    1.  Why do you want to reinstall Mountain Lion?  What problem are you trying to solve?
    2.  At what point is the installation failing?  You need to boot into teh recovery partition and then there are a number of steps to go through to reinstall the OS...what steps are you able to successfully complete, and what, exactly, is the error message you get when it fails.  If you can write down the error message and quote it word for word, that would be helpful.
    3.  Do you have an up to date backup  of your system?

  • How to recover deleted "Recovery Partition"

    Ok so I apologize in advance if this story is a bit long, and horrifying (actually it's probably entertaining xD). I purchased the Lenovo y510p gaming laptop on back on July 14th 2014. I got the laptop, and it just didn't work for me. It didn't play the games I wanted it to, it had overheating issues, the keyboard had a really sharp edge making typing uncomfortable as well. After installing Sony Vegas and Avast, and just shifting some of my personal photos/music over, I made a backup of the laptop using the OneKey Recovery software. This backup was made to one of my 500GB external hard drives. So I then decided that I just didn't like the laptop, and it was time to return it. I called Newegg, and got my RMA all ready to go. Because I had lot of my personal files and programs, I decided the fastest way to delete everything would be to use the OneKey Recovery by Lenovo, and do a factory reset. At the time, I didn't think anything of this then simply putting the laptop back to exactly how I got it. I even booted it up after the factory reset, and it looked just like the first day I got it. Fast forward 2 weeks, and my RMA is denied from Newegg:   Your RMA (RMA Number: 60470880) return was received and sent to our Inspections Department for closer examination. 34-313-740 NB LENOVO IDEAPAD Y510P 59406636 RTSystem has been modified/altered original manufacturers operating system has been removed cannot access restore partition, this voids Newegg warranty. Unit cannot be accepted or resold as received.  So I was completely shocked as to how I had managed to delete the recovery partition, I didn't modify the OS in anyway, and I phoned Newegg to check what was going on. They confirmed that the tech people at the returns department could not reset the laptop properly, because the recovery partition had been deleted. So, the laptop is being shipped back to me this week, and my question was what on earth could I do to recover this "deleted recovery partition?"  If the OneKey Recovery still works, I don't see why it woudn't, then I can restore the backup that I made on my external hard drive from Day 1. That should bring back this alleged "recovery partition" that's been causing all hell to break loose lol. If however, I can't access that OneKey Recovery, I believe I'm in a huge pile of trouble. Newegg said that if I can manage to recovery that lost "recovery partition" then they will honor my RMA and refund my money.  At this point in time, I'm trying to salvage my situation, and think and act quickly as Newegg does have a 30day only return policy. I didn't do much with the laptop when I had it other than test a few games, so I honestly have NO IDEA how I could've deleted the recovery partition. But I'm not thinking of that anymore, and thinking ahead as to how I can recovery this deleted "recovery partition." Thanks for reading this horror story, and I really appreciate any responses.   

    Man I am overwhelmed by the amount of thoughtful and informative responses I'm receiving, thanks so much guys. @Rocky- They are shipping the laptop back to me this week, I should have it by Friday. The first thing I'll do is go into Disk management to see if the recovery drives are there. Tbh, I doubt Newegg would purposely rip me off, so I'm expecting the drives to be missing. If they're not however, I'm taking pictures and probably dancing because I'll be so happy haha. If the drives are NOT there, I'll see if I can load up OneKey Recovery, and restore my backup, and go from there. Also yes I'm sure I bought it from Newegg, no third parties. @neok- That's exactly what I was thinking! I did the OneKey Recovery, then packed the laptop up and sent it for shipping. Then I get a RMA denied and I was completely shocked. That made me wonder if you could only do the OneKey Recovery once maybe, but I contacted Lenovo and they gave me a letter, written, saying what the OneKey software does. I then forwarded this email to the supervisor at Newegg, but she told me that the fact of the matter is that the "recovery partition" is not accesible anymore, and they're not honoring my RMA unless I retreive it. They were very adament about this. Also thanks for those links, I did a few Google searches myself and those are generally what I found. The reoccuring theme in those cases seems to be people resizing their partitions. I did not do that, simply played a few games, didn't like the laptop, did a factory reest, and boom. That's all I did. If I'm unable to use OneKey Recovery when I get the laptop back this upcoming Friday, I'll consult with those links. Thanks! @Zoltan- Yeah honestly I want to be furious with Newegg, but then seeing as they're really quite strong on their grounds that I somehow deleted it, I'm trying to think back to what I did. However, I find it hard to believe that I would delete the recovery partition, even accidently, because I only had the laptop for a day, and all I was really doing was transferring my photos/music, and installing a few programs. My desperate last attempt to salvage my money will be calling Lenovo and requesting the recovery media, even if it costs $60 or up. The only problem with this is that they might take a while to ship the disc. I only have until around August 14th before Newegg's 30day return policy kicks in, although I spoke with the Newegg supervisor, and she granted me 1-2 days of grace. I could order the CD right now, before I even get the laptop shipped to me, but that's risky seeing as I might not need it at all, if I can still access the OneKey Recovery. The more I think about it though, if I explain my entire situation to Lenovo, they might send me a free CD which I could then order right now, saving me a few days, and serving as more of a precaution then anything. Thanks so much for the replies guys, last Friday was the most stressful day of my life, this RMA was denied, and then I thought about it all day at work. I think I could've been more aggressive with Newegg, but I have no real legal documentation to show them. I mean yes even if I did delete the recovery partition, which I didn't, but let's suppose I did. Deleting software is still not any means for flat out rejecting an RMA, and refusing to refund $1300. I just wish I had some sort of legal document to refer Newegg over to . 

  • How to build a recovery partition for mavericks?

    How do I create a recovery partition or disk for Mavericks?

    Suggestions for the capacity of a USB flash memory stick are in the 8GB+ range.
    Methods of how to create bootable OS X 10.9.x system on a USB flash vary a little...
    results of search: https://www.google.com/#q=Mac+OS+X+Mavericks+USB+key
    This one suggests get third-party utility to help do it [ http://diskmakerx.com/ ]
    and tells of a way without it, by use of Terminal utility in the OS X:
    http://arstechnica.com/apple/2013/10/how-to-make-your-own-bootable-os-x-10-9-mav ericks-usb-install-drive/
    http://www.macworld.com/article/2056561/how-to-make-a-bootable-mavericks-install -drive.html
    http://lifehacker.com/how-to-create-an-os-x-mavericks-usb-installation-drive-145 0280026
    So there are a few ways that fairly much have you go the same direction.
    Good luck & happy computing!

  • How to get a Recovery media for Satellite L305D S5900

    I am a Ghanaian who bought a Toshiba laptop about seven months ago. The model is Satellite L305D S5900. I am also in Ghana. I found out from the documents that came with the laptop and your forum that I can order for Recovery media for it with no charge on the software itself.
    How do I get this Recovery media for my machine as I am in a different country? What are the things involved?
    Thank You.

    Your T500 can burn CD's at the least and if you can access Windows, you should be able to burn a set of recovery discs.
    Other than that, I suggest calling support to see what they can do to help. The number in the U.S. is 1-800-426-7378.
    Tim Supples
    Lenovo Social Media
    Got a question? Don't PM me, post it on the forum!
    Lenovo Blogs
    X60 Tablet SXGA+ primary, Z61p fully loaded workhorse

  • How to install a recovery partition after installing a new Hard drive? and FileVault help.

    Hi,
    I recently swapped out hard drives and when I did a Time Machine backup to the new drive, I noticed there was no Recovery HD partition for my drive. Is there a way to install it back on my MacBook Pro (Late 2011, running 10.7.4)?
    On a slighlty different topic FileVault won't let me encrypt my new HD it says "Some disk formats don’t support the recovery partition required by encryption. To use encryption, reinstall this version of Mac OS X on a reformatted disk."
    What formatting does my disk require for FV to be turned on? Currently it is Mac OS Extended (journaled)
    If there is a solution to solve both these issues, or any one issue it would be appreciated.

    The formatting being referred to is actually the presence of the Recovery Disk.
    You can't enable FV2 without a recovery partition being present. The reason is strictly logical: if your entire disk was encrypted, how could you run the unencryption procedure you need to start up? That would itself be hidden behind the encryption. Hence, for FV2 to be able to work, you must have a Recovery disk present.
    When you boot up with FV2 enabled, the login screen you see to enter your password is actually running from the recovery disk (invisible to the user). After you enter your password, recovery boots your encrypted partition and logs you in to your account.

  • How to put a recovery partition on the hard drive

    How can I create a recovery partition on the hard drive of my laptop. I had to reinstall the whole system, and tried to use the HP recovery software they sent me but it quit when it was about three quarters the way finished. I had to use a copy of windows 8 to put the system back on my laptop. After I got it all straighten out, I updated it to windows 8.1 and it seems like the computer runs a lot faster with windows 8.1 on it. Now I need to find away to install a recovery partition on my hard drive.
    Thank You
    Garry Crist

    When requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
    The above requested information can be found on the bottom of the computer or inside the battery compartment. Please do not include the serial number. Please enter the model/product information into HP's Online Consumer Support page and/or post it here for our review.
    A Recover partition is something the factory places on the computer. It is an image of the factory installation and the software required to restore the computer to a factory like state using that image. You will not be able to create a Recovery partition on your computer unless you use the HP Recovery Discs to return the computer to a factory like state. Please note the HP Recovery Discs and the resulting HP Recovery partition will only contain an image of Windows 8 that cannot be updated to reflect the installation of Window 8.1.
    My suggestion is to use the Windows "System Image Backup" utility to create an exact image of the Windows 8.1 partition as it currently is. If your computer developes an issue or you need to replace the hard drive, all you have to do is "restore" the image to the computer. You will need to use an external USB hard drive or other media to store the image. Please see Windows 8.1 Tip: Use System Image Backup for instructions on creating and storing a "Windows - System Image Backup."
    If you have any further questions, please don't hesitate to ask.
    Please click the white KUDOS star to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Maybe you are looking for