How to get name and information in paypass credit card
i already can take information about name, card no , expirer date, card type for all the credit card...
only left the paypass i cannot take the info
can anyone help me??
i only face in the problem that dunno wat the APDU to use in paypass
cause all the card i use "00 B2 01 0C 00" this code also can retrive the data
only paypass it show "69 85"
have any other APDU that i can use??
sorry lexdabear, cause i use a program to run not yet create the code. and the program is giving me to put the APDU and will auto get response and return the status to me.. so
for master card i use 00 A4 04 00 07 A0 00 00 00 04 10 10 and get response i will get the status is 90 00
then use 00 B2 01 0C 00 i will get the information about the card
but paypass cannot. i will get error...
so i change to ur code also the same
Similar Messages
-
How to get name and Mac ID off MB Air?
Selling a MB Air, so I need to get my name, registration, Mac ID etc. off it. Any easy way to do that?
Will adding a new account with admin privileges and then deleting my original account do the trick?
Thanks.Are you sure you have no personnal information in any data files on the system? No credit card numbers anywhere? Passwords to web sites? etc .... If I was selling a system, I would do a secure erase of the hard drive by writing zero's to it (use Disk Utility to do that), restore software to it's original state, then sell the system. If you want to be really good to the buyer, you can scan these discussions to see how to reset the system, so it starts up as if it were a brand new system, allowing the new owner to register with Apple.
-
How to get name of sbRIO programatically
How to get "name" and "Comment" of sbRIO which I write to sbRIO-9602 in MAX in Identification box (Model, Serial number, MAC address, Name)?
Solved!
Go to Solution.That shows:
- IP settings
- IP adress: 136...etc.
- DNS name: MyMaster5 - THAT IS WHAT I NEED, just in wrong place - in MAX it is not in IP settings, that's why i didn't searched for it there.
- subnet mask 255.255.255.0
- gateway 136...
- DNS server 136...
- MAC address 00800...
- serial number 16....
- system state Running
- model name sbRIO-9602
- model code 7373
- password protected restarts? T/F
- halt if TCP/IP fails? T/F
- locked? T/F
- use DHCP? T/F
Still there is no "comment" as in MAX. But that's not so important now.
I have LW Development system 2009 SP1 Profesional, Realtime Development 2009 SP1
Thanks very much! -
Can I edit autofill? I'd like to autofill name address but not password, credit card, etc
I'd like to fill in forms more quickly without risking sharing credit and other information. I'd like to know how to do this.
This doesn't address my question. Thanks for your efforts though.
Here's a clarification in case someone is interested.
I'd like to autofill name and address without autofilling credit card and password. Some way of choosing or editing what autofill does. -
In Contacts version 8, how can I print ALL information in each individual card? When I select the print command the only thing printed is the name and address. I need phone number(s) and all other information in the cards. We enter various pieces of data, other than the standard name address & phone numbers and we print all information on each card so it fits in a 5x7 inch loose binder. We have used InTouch software for many years and it has served us extremely welll, however, the publisher (The Prairie Group) has not, and apparently has no plans to update their software to be compatible with any Mac OSX OS beyond 10.6. Any help will be appreciated!
You can select what you want included in a list format. In the Print command from Contacts, click the Show Details button. Then in the Style pulldown menu select "Lists" and there you'll be able to select what you want included. You can also select what you wish included if you select the Pocket Address Book style.
If neither of those options will work for you, then you will need to look to third-party software. Here's one possibility that seems to get good reviews:
https://www.macupdate.com/app/mac/15485/labels-&-addresses
I haven't done more than try it to make sure that it works with OS X 10.9's Contacts, which it does, but you can download their demo and try it yourself.
Regards. -
I have a toshiba computer and it is windows 7, recently after I installed imatch everytime I open itunes I get the message 'i tunes has stopped working' and windows cannot find a solution and has to close. There is no solution and I don't know how to get the crash information on my computer....can anyone help as I want to finish downloading all my songs to match to be available on my mac products.
Re: That garbage is unreadable.
If you really want help, stop messing with the fonts and post so that others can read and offer suggestions.
Or better yet... try a search, I'm certain you'll find a solution to whatever issue you're experiencing.
I have found that many times it is the things that make you most angry that push you to action. This was the case here. Thank you for causing me to get so angry that I found the answer myself. -
How do I edit track names and information in my I-tunes library? I followed the Help Center instructions, but it will not let me change anything. Can someone tell me what I'm doing wrong?
Those symptoms usually indicate a permissions problem. See Repair security permissions for iTunes for Windows for advice.
tt2 -
How to get names of method parameters ?
How to get names of method parameters (Not only their type and value) is it only possible during debugging ??
for example void myFunction(int a,int b)
I need the "a" , and the "b" The issiue is about the java.lang.reflect.InvocationHandler ,
and its method invoke(Object proxy,
Method method,
Object[] args)
throws Throwable
I Have the parameter objects themself and their types using method.getParameters() , this is fine ,, but i need the names of the parameters !!!If the class file was compiled without debug information included then it is impossible to get the original parameter names, as used in the source code.
However, If the class file does include debug information, then the method names are hidden deep within the class file. You'd need to parse the class file yourself. Check out a copy of the Java VM Specification for a detailed format of the java class file format.
It's not a trivial task to parse the java class file, and the VM spec isn't easy reading. You'd nearly be writing a class file disassembler. -
I cancelled a payment through PayPal. How do I update the payment for that charge? I looked at my payment information and it has my credit card information. I'm not sure where to update the payment that was associated with my PayPal account? I am not sure what that paid for? I am trying to process updates on my IPhone & IPad for apps. I have already downloaded.
Hi Xellana, and a warm welcome to the forums!
I'm looking for information and pricing on possibly upgrading the processor from the PowerPC to Intel.
While anything is possible if you had enough money... NOPE, you can't change the CPUs to Intel, nor can you get any faster PPC upgrades for it. It'd be far cheaper to buy a new IntelMac than to replace everything inside the G5, and I mean just about everything, then figure out how to machine the case & such to mount Intel Logic Board, Graphic Card & such.
Sorry. -
How to get nodes and its attributes of an XML file usiong DOM parsing?
how to get nodes and its attributes of an XML file usiong DOM parsing?
i am new to XML parsing.......
Thanking you........import org.w3c.dom.Document;
import org.w3c.dom.*;
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.parsers.DocumentBuilder;
import org.xml.sax.SAXException;
import org.xml.sax.SAXParseException; ...
//Setup the document
DocumentBuilderFactory docBuilderFactory = DocumentBuilderFactory.newInstance();
DocumentBuilder docBuilder = docBuilderFactory.newDocumentBuilder();
Document doc = docBuilder.parse (new File("MY_XML_FILE.xml"));
//get elemets by name
String elementValue = doc.getElementsByTagName("MY_ELEMENT").item(0).getTextContent();
//This method can return multiple nodes, in this instance I get item(0) , first nodeRead the api for other methods of getting data. -
How to get instrument and plug in files to logic8?
How to get instrument and plug in files to logic8?
I lost mine in a hard drive crash.
I cant use my DVD jam pack
This is my spec
Modellnamn: iMac
Modellidentifierare: iMac8,1
Processornamn: Intel Core 2 Duo
Processorhastighet: 2,4 GHz
Antal processorer: 1
Totalt antal kärnor: 2
L2-cache: 6 MB
Minne: 3 GB
Busshastighet: 1,07 GHz
Boot ROM-version: IM81.00C1.B00
SMC-version (system): 1.29f1
iMac, OS X Mountain Lion (10.8.2)I think you want to get the latitude and longitude information of client accessing the web application. In the web application you cannot directly get the client location information as the nature of the web application is different from windows applications.
I advise you to develop a Silverlight component and in that Silverlight component use geolocation classes to get client location. Please refer this article for getting data in Silverlight http://www.c-sharpcorner.com/UploadFile/82b980/getting-geo-location-of-user-in-silverlight/
And once you get the location information you can send that data back to ASP.net webpage or call any javascript method as shown here http://ovaismehboob.wordpress.com/2013/06/22/bridging-data-between-asp-net-and-silverlight/
Hope this helps!
Ovais Mehboob Ahmed Khan http://ovaismehboob.wordpress.com -
How to get name of table from front end
Hi,
How to get name of table from front end in EBS 11i?
thanx
AshishHi
Sandeep is correct. The "Help"/"Record History" will give you the table/view name, but sometimes this particular menu function give me a "Record History is not available here." error message.
I then use the following menu functions (this will also give you additional information, like column details).
1) Open Forms
2) Click on Help/Diagnostics/Examine (*you might have to enter the APPS password at this point)
3) Change "Block" to "System"
4) Change "Field" to "Last_query"
The system will populate the "Value" field with the query that was executed in order to populate the form.
Regards
Frank -
How do you download free software and updates without a credit card? I'm unable to by-pass the credit card information page..
This user, mountaingoatgirl, explains how to get a None option in your account details in the iTunes app on a Mac or PC. -
https://discussions.apple.com/message/24907941 -
How to display images and information
how to display images and information(e.g. like questions) on a jsp page that stored in a database
Look As far as i can see....
Utlimately every file could be expressed as a bytes buffer.
so say if you have a bean called Choice Bean which is expressed as
public class ChoiceBean{
private String choiceid;
private String choicedesc;
private byte image[];
public void setChoiceId(String choiceid){
this.choiceid = choiceid;
public String getChoiceId(){
return this.choiceid;
public void setChoiceDesc(String choicedesc){
this.choicedesc = choicedesc;
public String getChoiceDesc(){
return this.choicedesc;
public void setImage(byte image[]){
this.image = image;
public byte[] getImage(){
return this.image;
}QuestionList.java:
===============
public class QuestionList{
private List<ChoiceBean> choicelist;
/*Other member variable declarations*/
public List<ChoiceBean> getChoiceList(){
/*Custom code where you may build the list by querying the DA layer*/
return this.choicelist;
public int search(String choiceid){
int index = -1;
for(int i =0 ; i < this.choicelist.size() ; i++){
ChoiceBean cb = this.choicelist.get(i);
if(cb.getChoiceId().equals(choiceid)){
index = i;
break;
return index;
/* Other member method declarations */
}and you are retreving List<ChoiceBean> from DB using your query & have created a session attribute / <jsp:useBean> named ChoiceList
NOTE: sometimes your application server can go out of bounds as you are consuming a lot of memory by creating an arraylist object.
use the following methodology to display images & choices
sample.jsp:
=========
<jsp:useBean id="QuestionList" class="com.qpa.dao.QuestionList" scope="session"/>
<TABLE>
<%
/* QuestionList.getChoiceList() is a method which fetches data from the DB & returns it in form of List<ChoiceBean> */
List<ChoiceBean> choicelist = QuestionList.getChoiceList();
for(int i =0 ; i < choicelist.size() ; i++){
%>
<TR>
<TD><%!=choicelist.get(i).getChoiceId()%></TD>
<!-- calling servlet which renders an images in JPG format based upon given choiceid(unique field) -->
<TD><IMAGE src="ImageServlet?choiceid=<%!=choicelist.get(i).getChoiceId()%>"/> </TD>
<TD><%!=choicelist.get(i).getChoiceDesc()%></TD>
</TR>
<%
%>
</TABLE>
<%
session.remove("QuestionList");
%>
NOTE: usage of JSTL or any other custom built tag-libraries makes life more simpler in the following case
ImageServlet.java:
===============
public void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
byte buffer[] = null;
HttpSession session = request.getSession(false);
/*getting the QuestionList from the session*/
QuestionList ql = null;
String choiceid = new String("");
try{
choiceid = request.getParameter("choiceid");
/*getting the QuestionList from the session*/
ql = (QuestionList) session.getAttribute("QuestionList");
} catch(Exception exp){
if(choiceid.equals("") == false && ql != null ){
List<ChoiceBean> clist = QuestionList.getChoiceList();
assuming that you have created a serach method which searches the entire choice list and would give you
the index of that object which is being refered by unique choiceid and returns -1 if not found
int index = QuestionList.search(choiceid);
if(index != -1){
ChoiceBean cb = clist.get(index);
buffer = cb.getImage();
if(buffer != null){
// assuming that we have stored images in JPEG format only
JPEGImageDecoder decoder = JPEGCodec.createJPEGDecoder(new ByteArrayInputStream(buffer));
BufferedImage image =decoder.decodeAsBufferedImage();
response.setContentType("image/jpeg");
// Send back image
ServletOutputStream sos = response.getOutputStream();
JPEGImageEncoder encoder = JPEGCodec.createJPEGEncoder(sos);
encoder.encode(image);
} else {
response.setContentType("text/html");
response.getWriter().println("<b>Image data not found</b>");
}However,i still feel there are few loopholes with this approach where Application Server can eat up a lot of heap space which may result in outofmemorybound exception.
Hope this might help :)
REGARDS,
RaHuL -
Hi All,
Could someone tell me how to get names of all sub tabs?
I have Parent Tab T1. T1 has 3 sub tabs T1_1, T1_2 and T1_3.
I would like to have T1_1, T1_2 and T1_3 sub tab names in the list.
Thanks in advance!!
DipDip,
You can get the tab names from apex dictionary views, apex_application_tabs & apex_application_parent_tabs . Thanks.
Regards,
Manish
Maybe you are looking for
-
How to get rid of the large slideshow images in Web gallery (CS4)
Here is the deal. I've created a flash web gallery/ But the new CS4 has the option for slideshow with this flash stuff. CS3 use to create thumbnail and large images folders. The new one creates 3 folders: 1. thumbnails, 2, medium images, 3 large imag
-
For years, I have been using the code: <CFIF IsDefined("Word")> <cfheader name="Content-Type" value="application/msword"> <cfheader name="Content-Disposition" value="attachment;filename=MyFile.doc"> </CFIF> to cause a WOrd file to be created in a doc
-
How do i transfer my songs onto my new computer?
I just bought a new computer, and I cannot see any of my past purchases how do i transfer my songs?
-
Need some suggestions for a design layout like this site
This is just an example, but what im working on is personal family site that will be more of a family history site.. Is there anyway to build a layout dynamically so it looks like this? http://en.wikipedia.org/wiki/Image:Family_tree.svg Basically, in
-
I have code that changes the cursor indicating user can drag to resize VBoxes vertically, horizontally, or diagonally, but I'm not sure how to proceed to dynamically resize the VBoxes. If the user has the vertical resizing cursor displayed (by clicki