How to get negative values in Report?

Hi,
i have to do 1 FI report in that if it's debited value have to come negative. How can i do the same?

see this example
IF ittaxdet-shkzg = 'H'.
                 itsumtax-add_tax  = ittaxdet-hwste * -1.
               else.
                   itsumtax-add_tax = ittaxdet-hwste.
               ENDIF.

Similar Messages

  • How to get parameter value from report in event of value-request?

    Hi everyone,
    The customer want to use particular F4 help on report, but some input value before press enter key are not used in event of "at selection-screen on value-request for xxx", How to get parameter value in this event?
    many thanks!
    Jack

    You probably want to look at function module DYNP_VALUES_READ to allow you to read the values of the other screen fields during the F4 event... below is a simple demo of this - when you press F4 the value from the p_field is read and returned in the p_desc field.
    Jonathan
    report zlocal_jc_sdn_f4_value_read.
    parameters:
      p_field(10)           type c obligatory,  "field with F4
      p_desc(40)            type c lower case.
    at selection-screen output.
      perform lock_p_desc_field.
    at selection-screen on value-request for p_field.
      perform f4_field.
    *&      Form  f4_field
    form f4_field.
    *" Quick demo custom pick list...
      data:
        l_desc             like p_desc,
        l_dyname           like d020s-prog,
        l_dynumb           like d020s-dnum,
        ls_dynpfields      like dynpread,
        lt_dynpfields      like dynpread occurs 10.
      l_dynumb = sy-dynnr.
      l_dyname = sy-repid.
    *" Read screen value of P_FIELD
      ls_dynpfields-fieldname  = 'P_FIELD'.
      append ls_dynpfields to lt_dynpfields.
      call function 'DYNP_VALUES_READ'
        exporting
          dyname     = l_dyname
          dynumb     = l_dynumb
        tables
          dynpfields = lt_dynpfields
        exceptions
          others     = 1.
      check sy-subrc is initial.
    *" See what user typed in P_FIELD:
      read table lt_dynpfields into ls_dynpfields
        with key fieldname = 'P_FIELD'.
    *" normally you would then build your own search list
    *" based on value of P_FIELD and call F4IF_INT_TABLE_VALUE_REQUEST
    *" but this is just a demo of writing back to the screen...
    *" so just put the value from p_field into P_DESC plus some text...
      concatenate 'This is a description for' ls_dynpfields-fieldvalue
        into l_desc separated by space.
    *" Pop a variable value back into screen
      clear: ls_dynpfields.
      ls_dynpfields-fieldname  = 'P_DESC'.
      ls_dynpfields-fieldvalue = l_desc.
      append ls_dynpfields to lt_dynpfields.
      call function 'DYNP_VALUES_UPDATE'
        exporting
          dyname     = l_dyname
          dynumb     = l_dynumb
        tables
          dynpfields = lt_dynpfields
        exceptions
          others     = 0.
    endform.                                                    "f4_field
    *&      Form  lock_p_desc_field
    form lock_p_desc_field.
    *" Make P_DESC into a display field
      loop at screen.
        if screen-name = 'P_DESC'.
          screen-input = '0'.
          modify screen.
          exit.
        endif.
      endloop.
    endform.                    "lock_p_desc_field

  • How to get  the values of bdcmsgcoll to be printed in report

    hi experts,
    I am updating Va02 using BDc .. this is done however  i m struck at this point..
    I want to display the log i.e  messages  like data was updated ,, or any error ...
    As far as i know these logs are stored in BDcmsgcoll but how to get these value to be
    displayed in report once the update is done ..
    please help..if any body has any code .. then do send it to me.
    Thanks in Advance
    Srinivas

    Srinivas,
    data: messtab type table of BDCMSGCOLL with header line.
    Call transaction 'SM50' using bdcdata
                                  mode 'N'
                                  <b>messages in messtab</b>.
    Loop at messtab .
      write : messtab
    endloop.
    Pls. reward if useful

  • How to Get checkbox value when List value changed in classic report

    hi ,
    i worked with apex 4.2 and i create normal classic report with one checkbox column and one column change it to select list(named loved) now i want when user change list
    take value of checkbox item and show it in message .
    SQL for report
    SELECT
    '<INPUT TYPE="checkbox" NAME="f01" VALUE="'
    ||SEQ
    ||'">' SEQ,
    ID,
    DEPT_NO,
    EMP_NAME} i change the column attributes of Dept_NO to Display as Select list of department name (named lov).
    now i want when user change name of department the value of SEQ SHOW IN ALERT MESSAGE
    i create JavaScript on the page
    function test(pThis) {
    var f01_value = $('select[name="f01"]').value;
    alert('#SEQ : '+ f01_value);
    </script>
    I call this javascript function when list change but the value undefined..
    My Question :
    How can get this value Or any value of item in reports
    regards
    Ahmed

    Hi Ahmed,
    >
    i worked with apex 4.2 and i create normal classic report with one checkbox column and one column change it to select list(named loved) now i want when user change list
    take value of checkbox item and show it in message .
    SQL for report
    SELECT
    '<INPUT TYPE="checkbox" NAME="f01" VALUE="'
    ||SEQ
    ||'">' SEQ,
    ID,
    DEPT_NO,
    EMP_NAME} i change the column attributes of Dept_NO to Display as Select list of department name (named lov).
    >
    You should not create checkboxes like this. Either use the APEX_ITEM.CHECKBOX2 API or change the Column Type to Simple Checkbox.
    >
    now i want when user change name of department the value of SEQ SHOW IN ALERT MESSAGE
    i create JavaScript on the page
    function test(pThis) {
    var f01_value = $('select[name="f01"]').value;
    alert('#SEQ : '+ f01_value);
    </script>
    >
    name="f01" returns an array, what you need is single element value.
    Try
    <script type="text/javascript>
    function test(pThis) {
      var f01_value = $v(pThis);
       alert('#SEQ : '+ f01_value);
    </script>
    {code}
    {quote}
    I call this javascript function when list change but the value undefined..
    My Question :
    How can get this value Or any value of item in reports
    {quote}
    Depends in how you are invoking/triggering the change event. Are you using DA or have you written an "onchange" event on the element?
    Cheers,                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Negative values in report for delta

    Hello,
    I am getting negative values for service level report metrics in delta loading, intresting thing is metrics is giving correct values for almost all the order but for around 40 order I am getting -ve values in metrics (i am getting -100 % and correct value should be 100 %, it is for around 40 records only for other records I am getting it correctly), If I do the full initalization again it brings me the correct poistive values but again get some -ve values when I run the new delta loads.
    Please give your suggestion on comments on this. I will assign point to all the answers and full point to right answer.
    if you need any further information pl let me know
    Hitesh

    Hello Manga, Kedar and Eric,
    Thanks for your quick replies,
    Manga, I am checking the orders on r/3 how they were processed thanks for your suggestions
    Kedar, yes these are custom extractor using 2lis_11_v_ssl and 2lis_11_vaitm going to ods and then to infocube and I am reporting it on infocube. can you please specify in detail what exactly I should check on extracotr side/ do I need to check at first level ODS anthing specific ??
    as these metrics calculation are done using RKFs and  CKFs in query designer and those all are correct.
    Pl advise
    Any other suggestions/ comments are most welcome
    Note: I have assigned points to all the answers
    Hitesh
    Message was edited by: Hitesh Asknani
    Message was edited by: Hitesh Asknani

  • How to get maximal value from the data/class for show in Map legend

    I make WAD report that using Map Web Item.
    I devide to four (4) classes for legend (Generate_Breaks).
    I want to change default value for the class by javascript and for this,
    I need to get maximal value from the class.
    How to get maximal value from the data/class.
    please give me solution for my problem.
    Many Thx
    Eddy Utomo

    use this to get the following End_date
    <?following-sibling::../END_DATE?>
    Try this
    <?for-each:/ROOT/ROW?>
    ==================
    Current StartDate <?START_DATE?>
    Current End Date <?END_DATE?>
    Next Start Date <?following-sibling::ROW/END_DATE?>
    Previous End Date <?preceding-sibling::ROW[1]/END_DATE?>
    ================
    <?end for-each?>
    o/p
    ==================
    Current StartDate 01-01-1980
    Current End Date 01-01-1988
    Next Start Date 01-01-1990
    Previous End Date
    ================
    ==================
    Current StartDate 01-01-1988
    Current End Date 01-01-1990
    Next Start Date 01-01-2005
    Previous End Date 01-01-1988
    ================
    ==================
    Current StartDate 01-01-2000
    Current End Date 01-01-2005
    Next Start Date
    Previous End Date 01

  • How to get the values from repeated frame?.

    Hi
    how to get the values from repeated frame?. i have to disply the first 3 digits in another place in my report.
    i have field empno in repeated frame and i want to disply first 3 digits in another place in the same report.
    thanks

    How often do you need to display it? It sounds like you might want to base a summary on that formula with a function of first or last. If it's a per page basis, it can be a page level summary. If it's at a higher level repeating frame, then you can create the summary at that level. I'd suggest taking a look at the online help for summaries using the first/last functions.
    Hope that helps,
    Toby

  • How to get the values of Select-options from the screen.

    The value of parameter can be obtained by function module 'DYNP_VALUES_READ' but How to get the values of Select-options from the screen? I want the F4 help values of select-options B depending on the values in Select-option A.So I want to read the Select-option A's value.

    Hi,
    Refer this following code..this will solve your problem...
    "Following code reads value entered in s_po select options and willprovide search
    "help for s_item depending upon s_po value.
    REPORT TEST.
    TABLES : ekpo.
    DATA: BEGIN OF itab OCCURS 0,
    ebelp LIKE ekpo-ebelp,
    END OF itab.
    SELECT-OPTIONS   s_po FOR ekpo-ebeln.
    SELECT-OPTIONS s_item FOR ekpo-ebelp.
    INITIALIZATION.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_item-low.
      DATA:
      dyn_field TYPE dynpread,
      temp_fields TYPE TABLE OF dynpread,
      zlv_dynpro TYPE syst-repid.
      zlv_dynpro = syst-repid.
      CALL FUNCTION 'DYNP_VALUES_READ'
        EXPORTING
          dyname     = zlv_dynpro
          dynumb     = syst-dynnr
          request    = 'A'
        TABLES
          dynpfields = temp_fields
        EXCEPTIONS
          OTHERS     = 0.
      LOOP AT temp_fields INTO dyn_field.
        IF dyn_field-fieldname EQ 'S_PO-LOW'.
            SELECT * INTO CORRESPONDING fields OF TABLE itab FROM ekpo
            WHERE ebeln EQ dyn_field-fieldvalue.
            EXIT.
        ENDIF.
      ENDLOOP.

  • How to get the values from popup window to mainwindow

    HI all,
       I want to get the details from popup window.
          i have three input fields and one search button in my main window. when i click search button it should display popup window.whenever i click on selected row of the popup window table ,values should be visible in my main window input fields.(normal tables)
       now i am able to display popup window with values.How to get the values from popup window now.
       I can anybody explain me clearly.
    Thanks&Regards
    kranthi

    Hi Kranthi,
    Every webdynpro component has a global controller called the component controller which is visible to all other controllers within the component.So whenever you want to share some data in between 2 different views you can just make it a point to use the component controller's context for the same. For your requirement (within your popups view context) you will have have to copy the component controllers context to your view. You then will have to (programmatically) fill this context with your desired data in this popup view. You can then be able to read this context from whichever view you want. I hope that this would have made it clear for you. Am also giving you an [example|http://****************/Tutorials/WebDynproABAP/Modalbox/page1.htm] which you can go through which would give you a perfect understanding of all this. In this example the user has an input field in the main view. The user enters a customer number & presses on a pushbutton. The corresponding sales orders are then displayed in a popup window for the user. The user can then select any sales order & press on a button in the popup. These values would then get copied to the table in the main view.
    Regards,
    Uday

  • How to get return values from task flow in af:region ?

    Hi!
    I'm working with a taskFlow that is rendered inside a popup using the "popup inside a region pattern" (http://www.oracle.com/technology/products/adf/patterns/popupregionpattern.pdf), but now this taskFlow has an input parameter and a return value definition. So the question is how to get a value returned by this taskFlow thas is called inside a region?
    Any suggestion?
    Thanks in advance!

    Hi,
    write the value to a shared memory scope like session and read it in the regionNavigation listener. If you follow the paper you refer to then the listener determines of the viewId is null, this a return happens. It wuld then look in the memory scope for the return value.
    Another option would be to use an object that you pass as an argument to the task flow you open in the popup. Then you change the object you passed in, which then makes the return information available in teh calling flow. The object you pass in would have to be in a shared scope too
    Frank

  • How to get each value from a parameter passed like this '(25,23,35,1)'

    Hi
    One of the parameter passed to the function is
    FUNCTION f_main_facility(pi_flag_codes VARCHAR2) return gc_result_set AS
    pi_flag_codes will be passed a value in this way '(25,23,35,1)'
    How to get each value from the string
    like 25 first time
    23 second time
    35 third time
    1 fourth time
    I need to build a select query with each value as shown below:-
    (SELECT t2.org_id, t4.description
    from org_name t2, ref_org_name t3, code_table t4
    where t2.att_data = t4.code
    and t3.ref_code = t2.att_type
    and t2.att_type = 25 and t3.code_type = t4.code_type
    and to_date('01-JAN-10', 'DD-MON-YY') between t2.att_start_date AND t2.att_end_date) q1,
    (SELECT t2.org_id, t4.description
    from org_name t2, ref_org_name t3,code_table t4
    where t2.att_data = t4.code
    and t3.ref_code = t2.att_type
    and t2.att_type = 23 and t3.code_type = t4.code_type
    and to_date('01-JAN-10', 'DD-MON-YY') between t2.att_start_date AND t2.att_end_date) q2,
    (SELECT t2.org_id, RTRIM(xmlagg(xmlelement(e, t4.description || ';')
    ORDER BY t4.description).EXTRACT('//text()'), ';') AS DESCRIPTION
    from org_name t2, ref_org_name t3,code_table t4
    where t2.att_data = t4.code
    and t3.ref_code = t2.att_type
    and t2.att_type = 35 and t3.code_type = t4.code_type
    and to_date('01-JAN-10', 'DD-MON-YY') between t2.att_start_date AND t2.att_end_date
    group by t2.org_id) q3,
    (SELECT t2.org_id, t4.description
    from org_name t2, ref_org_name t3, code_table t4
    where t2.att_data = t4.code
    and t3.ref_code = t2.att_type
    and t2.att_type = 1 and t3.code_type = t4.code_type
    and to_date('01-JAN-10', 'DD-MON-YY') between t2.att_start_date AND t2.att_end_date) q4
    Please help me with extracting each alue from the parm '(25,23,35,1)' for the above purpose. Thank You.

    chris227 wrote:
    I would propose the usage of regexp for readibiliy purposes and only in the case if this doesnt perform well, look at solutions using substr etc.
    select
    regexp_substr( '(25,23,35,1)', '\d+', 1, 1) s1
    ,regexp_substr( '(25,23,35,1)', '\d+', 1, 2) s2
    ,regexp_substr( '(25,23,35,1)', '\d+', 1, 3) s3
    ,regexp_substr( '(25,23,35,1)', '\d+', 1, 4) s4
    from dual 
    S1     S2     S3     S4
    "25"     "23"     "35"     "1"In pl/sql you do something like l_val:= regexp_substr( '(25,23,35,1)', '\d+', 1, 1);
    If t2.att_type is type of number you will do:
    t2.att_type= to_number(regexp_substr( '(25,23,35,1)', '\d+', 1, 1))Edited by: chris227 on 01.03.2013 08:00Sir,
    I am using oracle 10g.
    In the process of getting each number from the parm '(25,23,35,1)' , I also need the position of the number
    say 25 is at 1 position.
    23 is at 2
    35 is at 3
    1 is at 4.
    the reason I need that is when I build seperate select for each value, I need to add the query number at the end of the select query.
    Please see the code I wrote for it, But the select query is having error:-
    BEGIN
    IF(pi_flag_codes IS NOT NULL) THEN
    SELECT length(V_CNT) - length(replace(V_CNT,',','')) FROM+ ----> the compiler gives an error for this select query : PLS-00428:
    *(SELECT '(25,23,35,1)' V_CNT  FROM dual);*
    DBMS_OUTPUT.PUT_LINE(V_CNT);
    -- V_CNT := 3;
    FOR L_CNT IN 0..V_CNT LOOP
    if L_CNT=0 then
    V_S_POS:=1;
    V_E_POS:=instr(pi_flag_codes, ',', 1, 1)-1;
    else
    V_S_POS:=instr(pi_flag_codes,',',1,L_CNT)+1;
    V_E_POS:=instr(pi_flag_codes, ',', 1, L_CNT+1)-V_S_POS;
    end if;
    if L_CNT=V_CNT then
    V_ID:=TO_NUMBER(substr(pi_flag_codes,V_S_POS));
    else
    V_ID:=TO_NUMBER(substr(pi_flag_codes,V_S_POS,V_E_POS));
    end if;
    VN_ATYPE := ' t2.att_type = ' || V_ID;
    rec_count := rec_count +1;
    query_no := 'Q' || rec_count;
    Pls help me with fetching each value to build the where cond of the select query along with the query number.
    Thank You.

  • How to get selected value from selectOneRadio ???

    Hi...i want to how to get selected value from selectOneRadio and use it in another page and in backing bean.
    Note i have about 10 selectOneRadio group in one page i want to know value of each one of them.
    Plzzzzzzzz i need help

    You have a datatable in which each row is a question, correct?
    Also in each row you have 5 possible answers that are in a radio, correct?
    So,
    You need to put in your datatable model, a question, and a list of answers (5 in yor case) and the selected one.
    So you will have a get to the question, an SelectItem[] list to populate the radios and another get/set to the selected question.
    ex:
    <h:selectOneRadio value="#{notas.selectedString}" id="rb">
    <f:selectItem itemValue="#{notas.valuesList}"/>
    </h:selectOneRadio>
    Search the web for examples like yours.

  • How to get actual value from LOV list

    Like Subject says: How to get actual value from LOV list. Any help will be appreciated.
    Thanks.

    Thanks Shay, I did it with bind variable because I'm not using JSF. Is there any chance to post solution using standard JSTL or HTML expression. I have something like this: LOV displays some Companies names:
    <html:select property="UserJobCompanyId"
                             disabled="${!bindings[\'UserJobCompanyId\'].updateable}"
                             onchange="submitform();">
                  <html:optionsCollection label="prompt" value="index" property="UserJobCompanyId.displayData"/>                                                     
                </html:select>and I want to get CompanyID of selected Company.
    Thanks, again.

  • How to get column value from DB grid

    Hi!
    I wander how to get col value from GridControl?
    My app consists of one rowsetinfo with two
    columns CODE and DESCRIPTION and a jbutton
    titled SELECT. When user clicks SELECT button
    the app should show the value of the CODE col
    of the selected row in GridControl.
    I wander how to make this action ?
    XxpsTransTimesMasterIter.setAttributeInfo( new AttributeInfo[] {
    CODEXxpsTransTimesMasterIter,
    DESCRIPTIONXxpsTransTimesMasterIter} );
    XxpsTransTimesMasterIter.setName("XxpsTransTimes");
    XxpsTransTimesMasterIter.setQueryInfo(new QueryInfo(
    "XxpsTransTimesMasterIterViewUsage",
    "lov.XxpsTransTimes",
    "CODE, DESCRIPTION",
    "XXPS_TRANS_TIMES",
    null,
    null
    ));

    Hi,
    You could attach an ActionListener on the JButton, and try the following code :
    NavigationManager fm = NavigationManager.getNavigationManager();
    DataItem dataItem = fm.getFocusedControl().getDataItem();
    ImmediateAccess col_code = null;
    String code = null;
    if (dataItem != null && dataItem instanceof RowsetAccess) {
    RowsetAccess rowset = (RowsetAccess)dataItem;
    try {
    col_code = (ImmediateAccess) rowset.getColumnItem("CODE");
    code = col_code.getValueAsString();
    } catch (DuplicateColumnException de) {
    return;
    } catch (ColumnNotFoundException ce) {
    return;
    } catch (SQLException se) {
    return;
    JTextField tf = new JtextField();
    tf.setText(code);
    I haven't tested this code.
    I am curious to know, the Object type of the dataItem.If it doesnot happen to be RowsetAccess ..try.. ScrollableRowsetAccess OR ImmediateAccess.
    Your code would change accordingly, depending on the instance.Refer to the product documentation for this.
    Do let me know, if this works.
    TIA
    Sandeep

  • How to get string value from xml in JSF??

    In JSF How to get string value from xml, .ini and properties file. I want to get string value from xml or text to JSF

    Just use the appropriate API's for that. There are enough API's out which can read/parse/write XML, ini and properties files. E.g. JAXP or DOM4J for xml files, INI4J for ini files and Sun's own java.util.Properties for propertiesfiles.
    JSF supports properties files as message bundle and resource bundle so that you can use them for error messages and/or localization.

Maybe you are looking for