How to get Network headers from Project definition in PS module?

Hi All,
I want to get all network headers under a project definition. Please let me know how to get them?
Do we have any BAPI for that?

Check these BAPi's
BAPI_PROJECTDEF_GETDETAIL
BAPI_NETWORK_GETDETAIL

Similar Messages

How to get HTTP headers from Data Provider Class?

Hi,
I'm the beginner in SAP NetWeaver Gateway. Using Service Builder I created CRUD OData web service and implemented CRUD operations in Data Provider Class. Data Provider Class has methods like MYENTITY_GET_ENTITYSET, MYENTITY_GET_ENTITY, MYENTITY_CREATE_ENTITY, MYENTITY_UPDATE_ENTITY. How can I get HTTP headers from the methods of this Data Provider Class?

You can do so by using the following code in DPC
Data : Lo_facade type ref to /IWBEP/IF_MGW_DP_INT_FACADE.
lo_facade ?= /iwbep/if_mgw_conv_srv_runtime~get_dp_facade( ).
lt_client_headers = lo_facade->get_request_header( ).
Regards,
Atanu

How to get table headers in jsp page

hi,
this is praveen, can any one help me to solve this problem.
how to get table headers in a jsp page. whether it is possible using javascript or is there any other way.
pls send rep.
thank u.

Hai ,
I Think This will help ful for u check it ,
File=new FileLog("f:/WebServiceTrace/trace2.%g.log", 800000, 10,                                        new TraceFormatter());
The above code specifies the path for your log file.
Then add this file as a log location and then log the traces. For this you can use the following code like:
Location location=Location.getLocation(className);
          location.addLog(file);
          location.setEffectiveSeverity(Severity.ALL);
          location.entering(methodName);
To Create j2ee apllication
In path new-j2ee-jsp to create JSP's can only be used for J2EE applications.
So as you are using this in Portal Application, this does not work.
You can test this bahavior by creating a new Web Application (New-Project-J2EE-Web Module Project)
In this Web Module Project, try creating JSP, this will work.
So dont use new-j2ee-jsp to create JSP in Portal Application instead use New-File and name the file as jsp.
Regards ,
venkat

How to get missing songs from old phone

Hello all,
I recently broke my iphone and I just received a new one in the mail the other day. I created a backup in itunes and used that backup to restore my new phone. However, when my new phone was finished restoring I was missing about 1000 songs. Without starting over what is the best way to get the missing music from my old phone to the new one? Can I load itunes on another computer and then sync my music from my old phone and then just copy the library to itunes on my main computer? Thanks for any help.

Hi HelpPleaseMan,
>>How to get a photo from windows phone 8 programmatically and how to save that photo into my phone.
In Windows Phone 8 we can use the
PhotoChooserTask to enable users to select an existing photo from the phone.
For more information, please try to refer to:
#How to use the photo chooser task for Windows Phone 8:
https://msdn.microsoft.com/en-us/library/windows/apps/hh394019(v=vs.105).aspx .
Besides, we can also use the
CameraCaptureTask to enable users to take a photo from your application using the built-in Camera application. If the user completes the task, an event is raised and the event handler receives a photo in the result. On Windows Phone 8, if the user accepts
a photo taken with the camera capture task, the photo is automatically saved to the phone’s camera roll.
For more information, please try to refer to:
#How to use the camera capture task for Windows Phone 8:
https://msdn.microsoft.com/library/windows/apps/hh394006(v=vs.105).aspx .
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to get the values from popup window to mainwindow

HI all,
   I want to get the details from popup window.
      i have three input fields and one search button in my main window. when i click search button it should display popup window.whenever i click on selected row of the popup window table ,values should be visible in my main window input fields.(normal tables)
   now i am able to display popup window with values.How to get the values from popup window now.
   I can anybody explain me clearly.
Thanks&Regards
kranthi

Hi Kranthi,
Every webdynpro component has a global controller called the component controller which is visible to all other controllers within the component.So whenever you want to share some data in between 2 different views you can just make it a point to use the component controller's context for the same. For your requirement (within your popups view context) you will have have to copy the component controllers context to your view. You then will have to (programmatically) fill this context with your desired data in this popup view. You can then be able to read this context from whichever view you want. I hope that this would have made it clear for you. Am also giving you an [example|http://****************/Tutorials/WebDynproABAP/Modalbox/page1.htm] which you can go through which would give you a perfect understanding of all this. In this example the user has an input field in the main view. The user enters a customer number & presses on a pushbutton. The corresponding sales orders are then displayed in a popup window for the user. The user can then select any sales order & press on a button in the popup. These values would then get copied to the table in the main view.
Regards,
Uday

How to get a formula from the user from a text box in a webpage

Hi. I would like to know how to get the formula from the user who enters in a textbox. This formula can have any number of variables starting with a and goes on.
The complexity of the formula can go upto sin, cos, ln, exp. Also user enters the minimum and maximum values of these variables. Based on a specific algorithm (which I use) I would calculate a *set of values, say 10, for each of these variables, substitute in the formula and based on the result of this formula, I select ONE suitable value for each of the variables.
I don't know how to get this formula (which most likely to be different each time) and substitute the values *which I found earlier.
Kindly help me out in this issue.
Thanks

The textbox is the easy part. It's no different than getting a String parameter out of an HTTP request.
The hard part is parsing the String into a "formula" for evaluation. You'll have to write a parser or find one.
Google for "Java math expression parser" and see what you get.
Or write your own with JavaCC.
%

How to get each value from a parameter passed like this '(25,23,35,1)'

Hi
One of the parameter passed to the function is
FUNCTION f_main_facility(pi_flag_codes VARCHAR2) return gc_result_set AS
pi_flag_codes will be passed a value in this way '(25,23,35,1)'
How to get each value from the string
like 25 first time
23 second time
35 third time
1 fourth time
I need to build a select query with each value as shown below:-
(SELECT t2.org_id, t4.description
from org_name t2, ref_org_name t3, code_table t4
where t2.att_data = t4.code
and t3.ref_code = t2.att_type
and t2.att_type = 25 and t3.code_type = t4.code_type
and to_date('01-JAN-10', 'DD-MON-YY') between t2.att_start_date AND t2.att_end_date) q1,
(SELECT t2.org_id, t4.description
from org_name t2, ref_org_name t3,code_table t4
where t2.att_data = t4.code
and t3.ref_code = t2.att_type
and t2.att_type = 23 and t3.code_type = t4.code_type
and to_date('01-JAN-10', 'DD-MON-YY') between t2.att_start_date AND t2.att_end_date) q2,
(SELECT t2.org_id, RTRIM(xmlagg(xmlelement(e, t4.description || ';')
ORDER BY t4.description).EXTRACT('//text()'), ';') AS DESCRIPTION
from org_name t2, ref_org_name t3,code_table t4
where t2.att_data = t4.code
and t3.ref_code = t2.att_type
and t2.att_type = 35 and t3.code_type = t4.code_type
and to_date('01-JAN-10', 'DD-MON-YY') between t2.att_start_date AND t2.att_end_date
group by t2.org_id) q3,
(SELECT t2.org_id, t4.description
from org_name t2, ref_org_name t3, code_table t4
where t2.att_data = t4.code
and t3.ref_code = t2.att_type
and t2.att_type = 1 and t3.code_type = t4.code_type
and to_date('01-JAN-10', 'DD-MON-YY') between t2.att_start_date AND t2.att_end_date) q4
Please help me with extracting each alue from the parm '(25,23,35,1)' for the above purpose. Thank You.

chris227 wrote:
I would propose the usage of regexp for readibiliy purposes and only in the case if this doesnt perform well, look at solutions using substr etc.
select
regexp_substr( '(25,23,35,1)', '\d+', 1, 1) s1
,regexp_substr( '(25,23,35,1)', '\d+', 1, 2) s2
,regexp_substr( '(25,23,35,1)', '\d+', 1, 3) s3
,regexp_substr( '(25,23,35,1)', '\d+', 1, 4) s4
from dual
S1 S2 S3 S4
"25" "23" "35" "1"In pl/sql you do something like l_val:= regexp_substr( '(25,23,35,1)', '\d+', 1, 1);
If t2.att_type is type of number you will do:
t2.att_type= to_number(regexp_substr( '(25,23,35,1)', '\d+', 1, 1))Edited by: chris227 on 01.03.2013 08:00Sir,
I am using oracle 10g.
In the process of getting each number from the parm '(25,23,35,1)' , I also need the position of the number
say 25 is at 1 position.
23 is at 2
35 is at 3
1 is at 4.
the reason I need that is when I build seperate select for each value, I need to add the query number at the end of the select query.
Please see the code I wrote for it, But the select query is having error:-
BEGIN
IF(pi_flag_codes IS NOT NULL) THEN
SELECT length(V_CNT) - length(replace(V_CNT,',','')) FROM+ ----> the compiler gives an error for this select query : PLS-00428:
*(SELECT '(25,23,35,1)' V_CNT FROM dual);*
DBMS_OUTPUT.PUT_LINE(V_CNT);
-- V_CNT := 3;
FOR L_CNT IN 0..V_CNT LOOP
if L_CNT=0 then
V_S_POS:=1;
V_E_POS:=instr(pi_flag_codes, ',', 1, 1)-1;
else
V_S_POS:=instr(pi_flag_codes,',',1,L_CNT)+1;
V_E_POS:=instr(pi_flag_codes, ',', 1, L_CNT+1)-V_S_POS;
end if;
if L_CNT=V_CNT then
V_ID:=TO_NUMBER(substr(pi_flag_codes,V_S_POS));
else
V_ID:=TO_NUMBER(substr(pi_flag_codes,V_S_POS,V_E_POS));
end if;
VN_ATYPE := ' t2.att_type = ' || V_ID;
rec_count := rec_count +1;
query_no := 'Q' || rec_count;
Pls help me with fetching each value to build the where cond of the select query along with the query number.
Thank You.

How to get selected value from selectOneRadio ???

Hi...i want to how to get selected value from selectOneRadio and use it in another page and in backing bean.
Note i have about 10 selectOneRadio group in one page i want to know value of each one of them.
Plzzzzzzzz i need help

You have a datatable in which each row is a question, correct?
Also in each row you have 5 possible answers that are in a radio, correct?
So,
You need to put in your datatable model, a question, and a list of answers (5 in yor case) and the selected one.
So you will have a get to the question, an SelectItem[] list to populate the radios and another get/set to the selected question.
ex:
<h:selectOneRadio value="#{notas.selectedString}" id="rb">
<f:selectItem itemValue="#{notas.valuesList}"/>
</h:selectOneRadio>
Search the web for examples like yours.

How to get actual value from LOV list

Like Subject says: How to get actual value from LOV list. Any help will be appreciated.
Thanks.

Thanks Shay, I did it with bind variable because I'm not using JSF. Is there any chance to post solution using standard JSTL or HTML expression. I have something like this: LOV displays some Companies names:
<html:select property="UserJobCompanyId"
                         disabled="${!bindings[\'UserJobCompanyId\'].updateable}"
                         onchange="submitform();">
              <html:optionsCollection label="prompt" value="index" property="UserJobCompanyId.displayData"/>
            </html:select>and I want to get CompanyID of selected Company.
Thanks, again.

How to get column value from DB grid

Hi!
I wander how to get col value from GridControl?
My app consists of one rowsetinfo with two
columns CODE and DESCRIPTION and a jbutton
titled SELECT. When user clicks SELECT button
the app should show the value of the CODE col
of the selected row in GridControl.
I wander how to make this action ?
XxpsTransTimesMasterIter.setAttributeInfo( new AttributeInfo[] {
CODEXxpsTransTimesMasterIter,
DESCRIPTIONXxpsTransTimesMasterIter} );
XxpsTransTimesMasterIter.setName("XxpsTransTimes");
XxpsTransTimesMasterIter.setQueryInfo(new QueryInfo(
"XxpsTransTimesMasterIterViewUsage",
"lov.XxpsTransTimes",
"CODE, DESCRIPTION",
"XXPS_TRANS_TIMES",
null,
null
));

Hi,
You could attach an ActionListener on the JButton, and try the following code :
NavigationManager fm = NavigationManager.getNavigationManager();
DataItem dataItem = fm.getFocusedControl().getDataItem();
ImmediateAccess col_code = null;
String code = null;
if (dataItem != null && dataItem instanceof RowsetAccess) {
RowsetAccess rowset = (RowsetAccess)dataItem;
try {
col_code = (ImmediateAccess) rowset.getColumnItem("CODE");
code = col_code.getValueAsString();
} catch (DuplicateColumnException de) {
return;
} catch (ColumnNotFoundException ce) {
return;
} catch (SQLException se) {
return;
JTextField tf = new JtextField();
tf.setText(code);
I haven't tested this code.
I am curious to know, the Object type of the dataItem.If it doesnot happen to be RowsetAccess ..try.. ScrollableRowsetAccess OR ImmediateAccess.
Your code would change accordingly, depending on the instance.Refer to the product documentation for this.
Do let me know, if this works.
TIA
Sandeep

How to get string value from xml in JSF??

In JSF How to get string value from xml, .ini and properties file. I want to get string value from xml or text to JSF

Just use the appropriate API's for that. There are enough API's out which can read/parse/write XML, ini and properties files. E.g. JAXP or DOM4J for xml files, INI4J for ini files and Sun's own java.util.Properties for propertiesfiles.
JSF supports properties files as message bundle and resource bundle so that you can use them for error messages and/or localization.

How to get selected value from OADefaultListBean.

Hi All,
How to get selected value from OADefaultListBean ?
Thanks,

Hi,
To identify the user's selection(s) when the page is submitted, you would add the following logic to your processFormRequest() method:
OADefaultListBean list =
(OADefaultListBean)webBean.findChildRecursive("positionsList");
String name = list.getName();
String[] selectedValues = pageContext.getParameterValues(name);
To retrieve all the values in the list box, call list.getOptionsData().
--Prasanna

How to get attribute value from standard page ?

Hi,
How to get attribute value from standard page ?
String str = (String)vo.getCurrentRow().getAttrbute("RunId");
But this value is returning a null value ....
Can anyone help me to get this attribute value which is actually having a actual value .

getCurrentRow() would always return null if no setCurrentRow() is used.
Please check the page design and understand how many rows of VO are there. You can also use the following to get the row:
vo.reset();
vo.next();
Regards
Sumit

How to get real value from selectOneChoice with javascript?

Hi,
How to get real value from selectOneChoice with javascript? The event.getNewValue() only gets me the index of the selected item, not the value/title.
JSF page:
<af:resource type="javascript">
function parseAddress(event)
alert("new value: " + event.getNewValue());
</af:resource>
<af:selectOneChoice label="Location:" value="" id="soc4">
<af:clientListener type="valueChange" method="parseAddress" />
<f:selectItems value="#{Person.locations}" id="si7"/>
</af:selectOneChoice>
HTML :
<option title="225 Broadway, New York, NY-10007" selected="" value="0">225 Broadway (Central Office)</option>
<option title="90 Mark St., New York, NY-10007" value="1">90 Mark St. (Central Office)</option>
Thanks a lot.

Something I was missing ,
You need to add valuePassThru="true" in your <af:selectOneChoice component. I have personally tested it and got the actual value in alert box. I hope this time you got the real solution. You can also test the following code by your end.
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document id="d1">
<af:form id="f1">
<af:panelBox text="PanelBox1" id="pb1">
<af:selectOneChoice label="Set Log Level" id="soc1"
value="#{SelectManagedBean.loggerDefault}"
valuePassThru="true">
<af:selectItem label="select one" value="First" id="s6"/>
<af:selectItem label="select two" value="Second" id="s56"/>
<af:clientListener method="setLogLevel" type="valueChange"/>
</af:selectOneChoice>
<af:resource type="javascript">
function setLogLevel(evt) {
var selectOneChoice = evt.getSource();
var logLevel = selectOneChoice.getSubmittedValue();
// var logLevelObject = AdfLogger.NONE;
alert("new value is : " + logLevel);
//alert(evt.getSelection);
//alert(logLevelObject);
evt.cancel();
</af:resource>
</af:panelBox>
</af:form>
</af:document>
</f:view>
</jsp:root>

How to get the value from a JavaScript and send the same to Java file?

Hi.
How to get the value from a JavaScript (this JS is called when an action invoked) and send the value from the JS to a Java file?
Thanks and regards,
Leslie V

Yes, I am trying with web application.
In the below code, a variable 'message' carries the needed info. I would like to send this 'message' variable with the 'request'.
How to send this 'message' with and to the 'request'?
Thanks for the help :-)
The actual JS code is:
function productdeselection()
var i=0;
var j=0;
var deselectedproduct = new Array(5);
var message = "Are you sure to delete Product ";
mvi=document.forms[0].MVI;
mei=document.forms[0].MEI;
lpi=document.forms[0].LPI;
if(null != mvi)
++i;
if(null != mei )
++i;
if(null != lpi)
++i;
if(null != mvi && mvi.checked)
deselectedproduct[++j]="MVI?";
if(null != mei && mei.checked)
deselectedproduct[++j]="GAP?";
if(null != lpi && lpi.checked)
deselectedproduct[++j]="LPI?";
if( 0!=j)
if(i!=j)
for (x=0; x<deselectedproduct.length; x++)
if(null != deselectedproduct[x])
message =message+ "-" +deselectedproduct[x];
alert(message);
else
//alert(" You cannot remove all products!");
return false;
return true;
}

How to get Network headers from Project definition in PS module?

Similar Messages

Maybe you are looking for