How to get new drivers for pc to connect to Airport Extreme

I have an older Sony Vaio all-in-one pc, and it says it is not configured to connect to the Airport Extreme network. I can't get on line to get a new driver without a network connection. What to do?

Can you use a cable to connect to the internet without WiFi?
Regards,
Shawn

Similar Messages

How to get the drivers for Dell PowerEdge M620 in INF format?

How to get the drivers for Dell PowerEdge M620.
We tried downloading
http://www.dell.com/support/home/us/en/19/product-support/product/poweredge-m620/drivers but they are in exe?
How to get inf files for those?

As Jason pointed out, they can be extracted, I believe this can be done with 7zip also... Or you can just install one M620 from scratch, install the Dell drivers and then use this tool:
http://gallery.technet.microsoft.com/ConfigMgr-Driver-Injector-aae7d17d to grab the drivers in .inf format.

How to get English drivers for mini 210-1000

How do we get the English video drivers for a Mini 210-1000. All that can be found is Korean/Chinese drivers.

Hi,
Where do you live ? The following site should be all drivers in English:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&product=4075983
Please do not click, copy and paste to the browser address area.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to get new software for torch 9850 for new computer

I got a new laptop (both my old and new are Windows 7. I used the transfer software to transfer my old files to my new computer, but I didn't get the driver for my 7.1 Bundle 921 software so I can't sync my phone with my new computer. I've tried to download new softward to my new computer, but I can't open (something about my computer doesn't accomodate 32 bit???? Can anybody help me? Thanks.

Windows 7 64 bit comes with an emulator for 32 bit software so your computer is capable of running that software.
Something with the transfer so uninstall all BlackBerry software and try again.

How to get new fonts for pages

I am looking to add Eurostile to my Pages fonts list. Does apple have a trusted site to download these?

Eurostile is a commercial family of fonts.
Apple didn't boght a license for it so they don't deliver it.
Do you know that Google is a powerful tool ?
Search with the simple request:
eurostile AND font
and you will get several sources for official eurostile fonts and for free copies .
Of course, I will not guarantee that the copies have the quality of the original or that they are legal ones.
Yvan KOENIG (VALLAURIS, France) dimanche 6 juin 2010 18:20:31

New Macbook Pro reluctant to connect to Airport Extreme at 5ghz

I brought the latest 17" 2011 Macbook Pro back in April this year, to replace an older 15" MBP. I'm mostly happy with the new machine, but have noticed one frustrating problem.
When waking from sleep, and perhaps even from booting cold, the Macbook Pro always connects to my Airport Extreme at the slower 2.4ghz speed. My old Macbook Pro was always keen to jump onto the same network at 5ghz unless it was too far away to get a good quality signal. I still have the old MBP and it still behaves this way, correctly. The new Macbook Pro is meant to have more ariels in it for wifi (albiet unlikely to be present in my year or two old Airport Extreme) but I would expect it to behave at least as well as its older sibling.
The thing is if I disable Airport and re-enable it will then mostly lock on at 5ghz, its just frustrating having to do so. It's not even helped by locality, I'm currently in the same room 1m away from the Airport Extreme and it still wakes up onto 2.4ghz.
I've yet to upgrade to Lion, so am running on Snow Leopard. I've heard friends have niggling problems with Wifi waking from sleep anyways, so I look forward to seeing how this problem alters when i do upgrade.
Any suggestions, or anyone else experiencing the same behaviour? Thanks
Cheers
Jim

Delete the connection information for the 2.4 GHz connection and it won't be able to connect at 2.4 GHz.

How do I restrict access to USB Disk connected to Airport Extreme

I have attached a USB HDD to my Airport Extreme Base Station. The drive is divided into 4 partitions, which I did with the HDD connected directly to a MBP before plugging into the AEBS. All the Macs on the network seem to be able to read and write into all 4 partitions. Is there anyway to restrict which Macs can access with partition? Or, if I went to a single partition, is there a way to restrict access on a folder by folder basis?
I've tried searching, but the best answer I've found so far is that the AEBS will only support a single partition/volume.... which doesn't appear to be true anymore.
Thanks in advance

You can put a filter on your wifi or use something like the K9 browser.

How to install additional drivers for a shared photosmart c6180?

Hi, i am running windows 7 x64 and i have shared a photosmart c6180 on the pc. I need to add additional 32bit drivers so that pc's that run xp 32 bit can print to the shared printer (i cannot connect these other pc's directly to the printer via network). any way, under the sharing tab in printer properties, i can click on 'additional drivers' and choose x86, but then it asks for a driver location. what location do i specify? i've already tried c:\windows and c:\windows\system32, but it does not pick up any drivers at those locations. i've also downloaded all of the latest drivers from the hp site, but when i run the executable and specify their extracted locations, for example, c:\users\user1\appdata\temp\7Z139A\, it does not see any drivers there either.
any help is greatly appreciated!
thanks!
-s.

You wont be able to use exiting Win XP drivers on windows 7. You need to get new drivers for Windows 7, and install them as per your convenience, ie manually or automate it via script GP
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

How to access a USB disk drive connected to Airport Extreme from a Windows 7 PC?

How can I access a USB disk drive connected to Airport Extreme from a Windows 7 PC?

...Called it a roaming network. Wireless mode is create a wireless network. I have checked allow this network to be extended. Probably need to uncheck that?
Yes, that option should be deselected as it only pertains to when both routers are interconnected by wireless. Since you have a roaming network, they of course, would be interconnected by Ethernet.
The other important settings for a roaming network are:
Each router must have a unique station name. For the AirPort, this would be called its Base Station Name. I believe the default station name for Linksys routers is: linksys
Each router must broadcast a wireless network with an identical Network Name. For the Linksys, Network Name is the same as its SSID.
Each router wireless network must use the same Wireless Security type and password. The Linksys WRT-54G is capable of up to WPA2 Personal. If you have it set to this level of security, the AirPort should be at the same setting.
Make sure that each router is not on the same Radio Channel for the 2.4 GHz radio. In the US, there are basically only three non-overlapping channels: 1, 6, or 11. Set each so that they don't use the same channel but use of those three choices.

I've installed windows 7 with the help of bootcamp on my macbook pro 2011. Please help me how to install mac drivers for windows7 64 bit???

I've installed windows 7 with the help of bootcamp on my macbook pro 2011.
Please help me how to install mac drivers for windows7 64 bit???

You either download drivers from within Boot Camp Assistant and save to USB FAT disk, or you insert and use 10.6.x OS X DVD when in Windows and install and run the SETUP from there.
General Help:
Boot Camp 4.0, OS X Lion: Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
- support articles and tips, how to.
http://www.apple.com/support/bootcamp/
Macs that work with 64-bit editions of Microsoft Windows Vista and Windows 7
http://support.apple.com/kb/HT1846
Step 4: Install the Boot Camp Drivers for Windows
After installing Windows, install Mac-specific drivers and other software for Windows using your Mac OS X installation disc. The Mac OS X disc installs drivers to support Mac components, including AirPort,built-in iSight camera, the Apple Remote, the trackpad on a portable Mac, and thefunction keys on an Apple keyboard.
The Mac OS X disc also installs the Boot Camp control panel for Windows and theApple Boot Camp system tray item.
To install the Boot Camp drivers:
1 Eject the Windows installation disc.
2 Insert the Mac OS X disc. If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
3 Follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
Windows that appear only briefly during the installation don’t require your input.
If nothing appears to be happening, there may be a hidden window that you mustrespond to. Check the taskbar and look behind open windows.
Important: Do not click the Cancel button in any of the installer dialogs.
4 After your computer restarts, follow the instructions in the Found New Hardware Wizard to update your software drivers (Windows XP only).
5 Follow the instructions for any other wizards that appear.
6 Check for updated Boot Camp drivers by using Apple Software Update or going to www.apple.com/support/bootcamp.
If You Have Problems Installing the Device Drivers
If it appears that the Boot Camp drivers weren’t successfully installed, try repairing them.
To repair Boot Camp drivers:
1 Start up your computer in Windows.
2 Insert your Mac OS X installation disc.
3 If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
4 Click Repair and follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
If you need to reinstall specific drivers, you can install one driver at a time. For example,if your built-in iSight camera isn’t working, you can reinstall just the iSight driver.
Individual drivers are in the Drivers folder on the Mac OS X installation disc.

How to Get HP Drivers After (DIY) Installing Windows?

Series: How to Re-Install Windows when you don't have the Recovery Discs
Intro: What is an ISO? Why is it used?
Step 1 - Get the ISO - ISO Download Links
Step 2 - Burn the ISO to a DVD or USB
Step 3 - What to do with the ISO DVD/USB? Change the Boot Order
Step 4 - What to do After Windows is Installed? How to Get HP Drivers?
Step 4 - What to do After Windows is Installed? How to get HP Driver?
Winodws is Installed, Now What?
Once the installation is complete, you'll need to go to your HP Driver Page and download all of your drivers. Your wireless function may not work automatically with a fresh install. You may have to plug an Ethernet cable into the computer and into your router to connect to the internet initially, until you have downloaded your wireless driver.
The best way to use the HP Driver Page, is by putting in your product number ('P/N' found on the HP label on the bottom of the computer) and click Go, rather than the 'Detect my product - Find Now' option. Without an HP Recovery Disc version of Windows, the 'Detect my product' option is not likely to work properly.
Another important note: If you had to go all the way into BIOS and change the Boot Order to the DVD drive (or USB), you'll have to go back into BIOS at your convenience and change the Boot Order back to booting from the internal Hard Drive first. If you used the F9 Boot Order Menu, it only changes the Boot Order temporarily, for that one power on iteration.
If you have any questions, create a new post (How to Create a New Post - Video), copy and paste it's link into a private message to me, and I will respond on your thread

Note down all the file names of the following queries first:
SELECT NAME FROM V$DATAFILE;
SELECT NAME FROM V$CONTROLFILE
SELECT NAME FROM V$TEMPFILE
SELECT VALUE FROM V$PARAMETER WHERE NAME = 'spfile'
If the last query doesn't show any file then copy $ORACLE_HOME/dbs/init<SID>.ora file.
After making the list in sqlplus issue:
SHUTDOWN IMMEDIATE
And now you can copy all of those files to some other location. Make sure you install same version of OS and Oracle to restore these files. It would be easy for you if you keep the same directory structure after reinstall and place all those files as they were earlier.
Daljit Singh

How to Get Missing Dates for Each Support Ticket In My Query?

Hello -
I'm really baffled as to how to get missing dates for each support ticket in my query. I did a search for this and found several CTE's however they only provide ways to find missing dates in a date table rather than missing dates for another column
in a table. Let me explain a bit further here -
I have a query which has a list of support tickets for the month of January. Each support ticket is supposed to be updated daily by a support rep, however that isn't happening so the business wants to know for each ticket which dates have NOT been
updated. So, for example, I might have support ticket 44BS which was updated on 2014-01-01, 2014-01-05, 2014-01-07. Each time the ticket is updated a new row is inserted into the table. I need a query which will return the missing dates per
each support ticket.
I should also add that I DO NOT have any sort of admin nor write permissions to the database...none at all. My team has tried and they won't give 'em. So proposing a function or storable solution will not work. I'm stuck with doing everything
in a query.
I'll try and provide some sample data as an example -
CREATE TABLE #Tickets
TicketNo VARCHAR(4)
,DateUpdated DATE
INSERT INTO #Tickets VALUES ('44BS', '2014-01-01')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-05')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-07')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-03')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-09')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-11')
So for ticket 44BS, I need to return the missing dates between January 1st and January 5th, again between January 5th and January 7th. A set-based solution would be best.
I'm sure this is easier than i'm making it. However, after playing around for a couple of hours my head hurts and I need sleep. If anyone can help, you'd be a job-saver :)
Thanks!!

CREATE TABLE #Tickets (
TicketNo VARCHAR(4)
,DateUpdated DATETIME
GO
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-01'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-05'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-07'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-03'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-09'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-11'
GO
GO
SELECT *
FROM #Tickets
GO
GO
CREATE TABLE #tempDist (
NRow INT
,TicketNo VARCHAR(4)
,MinDate DATETIME
,MaxDate DATETIME
GO
CREATE TABLE #tempUnUserdDate (
TicketNo VARCHAR(4)
,MissDate DATETIME
GO
INSERT INTO #tempDist
SELECT Row_Number() OVER (
ORDER BY TicketNo
) AS NROw
,TicketNo
,Min(DateUpdated) AS MinDate
,MAx(DateUpdated) AS MaxDate
FROM #Tickets
GROUP BY TicketNo
SELECT *
FROM #tempDist
GO
-- Get the number of rows in the looping table
DECLARE @RowCount INT
SET @RowCount = (
SELECT COUNT(TicketNo)
FROM #tempDist
-- Declare an iterator
DECLARE @I INT
-- Initialize the iterator
SET @I = 1
-- Loop through the rows of a table @myTable
WHILE (@I <= @RowCount)
BEGIN
-- Declare variables to hold the data which we get after looping each record
DECLARE @MyDate DATETIME
DECLARE @TicketNo VARCHAR(50)
,@MinDate DATETIME
,@MaxDate DATETIME
-- Get the data from table and set to variables
SELECT @TicketNo = TicketNo
,@MinDate = MinDate
,@MaxDate = MaxDate
FROM #tempDist
WHERE NRow = @I
SET @MyDate = @MinDate
WHILE @MaxDate > @MyDate
BEGIN
IF NOT EXISTS (
SELECT *
FROM #Tickets
WHERE TicketNo = @TicketNo
AND DateUpdated = @MyDate
BEGIN
INSERT INTO #tempUnUserdDate
VALUES (
@TicketNo
,@MyDate
END
SET @MyDate = dateadd(d, 1, @MyDate)
END
SET @I = @I + 1
END
GO
SELECT *
FROM #tempUnUserdDate
GO
GO
DROP TABLE #tickets
GO
DROP TABLE #tempDist
GO
DROP TABLE #tempUnUserdDate
Thanks,
Shridhar J Joshi
<If the post was helpful mark as 'Helpful' and if the post answered your query, mark as 'Answered'>

How to manually install drivers for windows 7 64 bit?

How do I install drivers for iphone 5s? My desktop windows 7 64 bit is not recognizing the iphone

Download and install the 64 bit version of iTunes to get all drivers for iOS devices.
http://www.apple.com/itunes/download/

How to get Alerts mail for adapter engine errors in SAP PI 7.0

Hi Friends,
I configured Alerts in PI 7.0. with the help of t-code u2018ALRTCATDEF and created a new alert catergory.
In container tab i have mentioned all give below elements.
SXMS_MSG_GUID, SXMS_RULE_NAME, SXMS_ERROR_CAT, SXMS_ERROR_CODE, SXMS_FROM_PARTY, SXMS_FROM_SERVICE, SXMS_FROM_NAMESPACE, SXMS_FROM_INTERFACE, SXMS_TO_PARTY, SXMS_TO_SERVICE, SXMS_TO_NAMESPACE,SXMS_TO_INTERFACE
I am getting alerts when I manually test the alerts configurations by running the report u2018RSALERTTESTu2019.
I am getting mail as :
Alert ID: ##00009##
Dear Administrator,
This is with respect to XI Scenario. During processing of XML file from ECC or XYZ Server, Following error has been occured:
Message ID:
Interface:
NOTE: To check the file name, go to SXMB_MONI and search for above message ID.
Double click on that message ID and click on error in left hand tree.
Please take appropriate action in co-ordination with respective functional and BASIS consultant.
But When I am getting a error , I am not getting an alert mail. Right now iam doing in XI Development.
I am not getting an Alert mail , when my message is in status of : System Error . Error catergory is : XI_J2EE_ADAPTER_JDBC.
Kindly tell how to get alert mail for error catergory : XI_J2EE_ADAPTER_JDBC and in Adapter engine errors.
How to get alert mail when my message is failed with any reason in Adapter engine.
Waiting for quick replay. Please help me out.
Regards,
Ahmed.

Hi thanks for quick reply.
As per your given link : http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/14877. [original link is broken]
I have done all these steps. But still little problem.
as per link he is getting Error description , error message id , alert rule..
In my case I am not getting these information. when my messages failed. When I am doing manully testing the alert getting an mail as :
Alert ID: ##00009##
Dear Administrator,
This is with respect to XI Scenario. During processing of XML file from ECC or XYZ Server, Following error has been occured:
Message ID:
Interface:
NOTE: To check the file name, go to SXMB_MONI and search for above message ID.
Double click on that message ID and click on error in left hand tree.
Please take appropriate action in co-ordination with respective functional and BASIS consultant.
Is it okay the body of mail??.
I am not getting alert mail when my messages failed in adapter engine and Integration Engine.
Ex my message is failed in AE:as below.
My messages flow as : SAP --> XI --> DB.
Messages is success (in ECC moni)> XI moni also success> XI Adapter engine getting error as (Status: System Error) and (Error Category : XI_J2EE_ADAPTER_JDBC).
Regards,
Ahmed.

How to get built.xml for ear file in jdeveloper?

Hi,
I am using JDeveloper to create EAR file for my ADF Fusion Application. I think Jdeveloper use ant to create EAR file. I know how to get built.xml for my war file.
Can anyone tell how to get that built.xml that create EAR file in Jdeveloper.?

This blog explains:
http://adfhowto.blogspot.com/2011/03/ojdeploy-deploying-adf-application-from.html
Based on the blog, I simply copied an existing project "deploy" target definition and augmented the project's build.xml with a new target "deployApp" that omits the Project parameter to ojdeploy. This causes ojdeploy to build the workspace-level deploy profile instead. I also omitted the output directory parameter (default is app's /deploy folder) and assume that there is only one application deployment profile (i.e. the default for profile parameter is the '*' wildcard). You can augment the build.properties file if you need to get fancier than that.
<target name="deployApp" description="Deploy Complete YourFoo Application"
depends="init">
<taskdef name="ojdeploy"
classname="oracle.jdeveloper.deploy.ant.OJDeployAntTask"
uri="oraclelib:OJDeployAntTask"
classpath="${oracle.jdeveloper.ant.library}"/>
<ora:ojdeploy xmlns:ora="oraclelib:OJDeployAntTask"
executable="${oracle.jdeveloper.ojdeploy.path}"
ora:buildscript="${oracle.jdeveloper.deploy.dir}/ojdeploy-build.xml"
ora:statuslog="${oracle.jdeveloper.deploy.dir}/ojdeploy-statuslog.xml">
<ora:deploy>
<ora:parameter name="workspace"
value="${oracle.jdeveloper.workspace.path}"/>
<ora:parameter name="profile"
value="${oracle.jdeveloper.deploy.profile.name}"/>
<ora:parameter name="nocompile" value="true"/>
</ora:deploy>
</ora:ojdeploy>
</target>

How to get new drivers for pc to connect to Airport Extreme

Similar Messages

Maybe you are looking for