How to get new notifications in extractor 2LIS_17_I0NOTIF .

Hi,
How to extract new notifications from this extractor - 2LIS_17_I0NOTIF. I am only getting notifications of type M2 . We want to get other notification no which are of type other than M2 , for example P0. Notifications for type P0 are already there in the system.
i refered to the sap note - 667544 which says that update group is not maintained. I checked in SPRO, update group is also maintained for other notification types .
Any suggestion will be helpful .
Regards,
Ashutosh Singh

Hi,
i have checked everything in BI side, there is no such restriction on notification type . I even took a notification number of type P0 and tried filling setup tables. 0 records were filled. But when i tried to fill the set up tables with a notification number of type M2, 1 record came in the setup tables.
So i am guessing its some kind of setting in SPRO which needs to be done .
Any suggestions on this matter will be helpful.
Thanks,
Ashutosh Singh

Similar Messages

My ipod wont tell me when i get new notifications and it started happening right after i updated it

after i updated my ipod it wont tell me when i get new notifications and it says i shuld sync it to itunes i did that and im still not getting new notifications also my imessage and facetime aren't working
Message was edited by: max83636893

Go into your settings, are the push notifications turned on? Same with messages.

My old Apple ID email add is deleted now how to get new on device??

I Have deactivated my old email Ladd which was my apple I'd now how to get new id on device as the old one is saved on it???

Hi Mahatif,
You will need to do the following:
1.     Go to Manage your Apple ID, and sign in with your current ID. EDIT that ID back to the old email address. This is temporary. Do NOT verify the email address, do NOT change the password: Apple - My Apple ID
2.     Go to Settings>iCloud and Sign off of/Delete the iCloud account. When prompted, input your current password. Sign out of any other apps that are signed into the old ID: iTunes & App Store, FaceTime, Messages, Mail.
3.     Go back to Manage your Apple ID and sign in with the old ID/current password. EDIT the old ID back to your current ID. You may have to verify the email address again.
4.     Go back to your device and sign into iCloud, iTunes, FaceTime, Messages, Mail as needed.
Cheers,
GB

I forgeting my Answer questions.how can get new Answer questions?

i forgeting my Answer questions.how can get new Answer questions?

Look to the right on this page under 'More like this'.

Didn't get FF5 New UI after upgrading from v4. It still show older UI How to get new UI ?

I recently upgraded FF4 to FF5 But Didn't get FF5 New UI. It still show older UI How to get new UI ?

You're welcome.
Please click the '''Solved It''' button next to the answer that answered or solved your Firefox support issue, '''''it appears when you are logged in''''', so this thread gets marked as '''Solved''' to help other users who may have this same problem.

Trigger how to get new and old value for nested table column?

Hi,
I have created a nested table based on the following details:
CREATE TYPE typ_item AS OBJECT --create object
(prodid NUMBER(5),
price NUMBER(7,2) )
CREATE TYPE typ_item_nst -- define nested table type
AS TABLE OF typ_item
CREATE TABLE pOrder ( -- create database table
ordid NUMBER(5),
supplier NUMBER(5),
requester NUMBER(4),
ordered DATE,
items typ_item_nst)
NESTED TABLE items STORE AS item_stor_tab
INSERT INTO pOrder
VALUES (800, 80, 8000, sysdate,
typ_item_nst (typ_item (88, 888)));
Now I would like to create a trigger on table pOrder for after insert or update or delete
and I would like to track the new and old value for the columns inside nested table.
Can anybody direct me how to do it?
I would like to know the sytax for it like:
declare
x number;
begin
x := :new.nestedtablecolumn;--how to get the new and old value from nested table columns
end;
Hope my question is clear.
Thanks,
Lavan

Hi,
Try like this:
CREATE OR REPLACE TRIGGER PORDER_I
BEFORE INSERT
ON PORDER
REFERENCING OLD AS old NEW AS new
FOR EACH ROW
DECLARE
items_new typ_item_nst;
ordid_NEW NUMBER;
BEGIN
FOR i IN :new.items.FIRST .. :new.items.LAST LOOP -- For first to last element
DBMS_OUTPUT.PUT_LINE(':new.items(' || I || ').prodid: ' || :new.items(I).prodid );
DBMS_OUTPUT.PUT_LINE(':new.items(' || I || ').price: ' || :new.items(I).price );
END LOOP;
END;Regards,
Peter

How to get new value from VO through CO?

Hi,
I have several tab in Po page. In the Lines Tab I change some values that I want to get in Distribution tab. This values aren't in the DB. How can I get it?
I tried the following code but it didn't work
                         OAViewObject PoLineMergeVO = (OAViewObject)rootAM.findViewObject ("PoLinesMergeVO");
                         oracle.jbo.Row PoLineMergeRow = PoLineMergeVO.first();
                         String s_category_id = PoLineMergeRow.getAttribute("CategoryId").toString();
any idea?
Best Regards Mayte

Hi Shobhit,
I'm new in OAF and I'm not sure if I know how to do it.
Could you tell how to store in collection object and store in session parameter????
I tried
CO 1
              OAViewObject PoLineMergeVO = (OAViewObject)rootAM.findViewObject ("PoLinesMergeVO");
              oracle.jbo.Row PoLineMergeRow = PoLineMergeVO.first();
              int num_row =   PoLineMergeVO.getRowCount();
              String s_num_row = Integer.toString(num_row);
              oapagecontext.writeDiagnostics(this,"Index Row--> "+s_num_row,1 );
              for (int i=0;i<5;i++)
                String s_category_id = PoLineMergeRow.getAttribute("CategoryId").toString();
               //How to store in collection object --> XXXXXXXX
                PoLineMergeRow = PoLineMergeVO.next();
CO2
How I get Collection object??
Thanks a lot for your help.
Best Regards Mayte

How to get Twitter @ notification on my iPhone 5?

Hi,
I'm not getting any Twitter notification on my iPhone, mainly on the lock screen.
I've enabled all notifications, deleted the app and re-installed, turned the phone off and on again but still nothing!
When someone @ mentions or sends me a direct message, I don't get any notifications on the lock screen, and only see it when I actually go on the Twitter app!
Anyone else had this problem?
How do I fix it?
Thanks,
Scott

exact same problem, it stopped yesterday afternoon and i have done EVERYTHING i can think of to try get it working again but it wont, i think my facebook notifications arent working either but i use facebook mesenger so it isnt as bad, help

HT204053 my safari and firefox old versions how to get new

how do i get new version of firefox and safari to support icloud?

As I aware of there is not concept of :old vs :new in alert. since you change last_name which mean it is an update instead of correction then you can get the new effective start_date and do minus - 1 to get the previouse record effective end_date and using that you can get the old last name.

How to get a notification or an alert in the workbench

Hi Experts,
I am creating 2 schedules,one to be completed on 1stAug and other on 2ndAug,where the 1st one depends on the other.
Now my requirement is that , If the approver forgets to approve on 1stAug,he should get a notification or an alert or an e-mail on his workbench for the incomplete task on 2ndAug also.
In my case ,even after keeping the dependency , I am getting a notification for the task which is not yet completed that is scheduled for 2ndAug.
Any help would be appreciated.
Thank you.

Hi vaishali,
you can set up the rules of your requirements via scripting code :
Scripting Context:Collection Validation
Class: ???
Target:SCHEDITEMS
KR,
Anacia

How to get push notifications of facebook in my iphone 3gs and my ios is 6.1.6

whwnever i open fb or fb messenger and other social networking app it appears that "CONNECT TO ITUNES TO GET PUSH NOTIFICATIONS." what can i do...?

http://support.apple.com/kb/TS3305

How to get automatic notifications on new patches

Hi,
I'm using EBS 11.5.10.2. Is there a way for a configuration to automatically get notifications whenever there are new patches (one-offs/rollups/maintenance etc) from metalink. I've configured the Oracle Configuration Notification Manager, but it looks quite basic and doesn't give much information.
dula

Dula,
Please see these documents.
Note: 233039.1 - Patch Information Bundle File (InfoBundle11i.zip)
Note: 789483.1 - What Is the E-Business Suite Recommended Patch List (RPL) Tool?
Regards,
Hussein

How to get new and old value in an alert?

Hi,
I created one event alert in Oracle Apps on PER_ALL_PEOPLE_F table.My intention is to execute the concurrent program attached to the alert when the user changes last_name fileld of that table.How can i get the :new.last_name and :old.last_name in alert.
Please give valuable solution to this question
Thanks in Advance
Manoj M

As I aware of there is not concept of :old vs :new in alert. since you change last_name which mean it is an update instead of correction then you can get the new effective start_date and do minus - 1 to get the previouse record effective end_date and using that you can get the old last name.

How to get New Window without Variable Entry screen from one Web Template?

Hi Experts,
I've a WebTemplate contains 2 Graphs. Each graph have one Zoom Button. My requirement is, When I click the Zoom button that corresponding Grpah should display in a New Window. I've finished all the above requirements.
Since, I have One Mandatory field, I'm always getting the Variable Screen in a New Window while I clik the Zoom Button.
I need to avoid this "Rerun" feature in New Window.
Kindly suggest me how to achieve this..
Full points will be given.
Thanks
Jay Jay

Hi Thanks.
Even I'm also trying for the same scenario only.
Actually I have 2 Web Templates.
In First Template I have 2 Charts and 2 Zoom buttons for each.
While I running the 1 Template, i give an Value in the Variable screen of First Web Template.
If I click a Zoom button of 1st Chart, It should open a New window with the Second Web Template. And Second Web Template should automatically take a First Template's Variable screen Values.
(Since, U have an Mandatory field in Second Template u were not faced this requirment.)
Even I tried with "TRANSFER_STATE". It is not taking the First Variable Screen's input values.
Kindly help me in this issue.
Thanks in advance.

How to get new controller instance instead of a cached one?

Hi,
I have the following problem. I am working on a stateful mvc application. You can search for items and then click on a button which allows you to see the details of an item in a new window and it is possible to modify it.
I use standard javascript code to open the details windows:
window.open("item.do?itemnumber=1", "MyFirstWindow");
This works fine. It opens the first window. The item controller is called for the first time and the do_init method will be executed.
Now, I open a second window with this code:
window.open("item.do?itemnumber=2", "MySecondWindow");
Unfortunately the framework will not create a second controller instance for the second window. It will use the already existing item controller (the do_init method will not be called).
Now, I have two windows open which both use the same controller instance.
So my question is: Is there the possibility to tell the framework that I need a new item controller instance for every new window?
I already checked various official url sap-parameters but did not find anything useful.
regards
Thomas

Hi,
sorry for not answering earlier. To be honest I thought there might a standard way to get a new controller instance. But it seems that is not the case. For everybody who is interested I think I will use the following solution.
I create a wrapper controller called itemwrapper.do. The view of this controller has the following layout:
<htmlb:content design="design2003" >
<htmlb:document>
    <htmlb:documentHead>
    </htmlb:documentHead>
    <htmlb:documentBody>
              <bsp:call url     = "item.do"
                        comp_id = "<%= item_id %>">
                <bsp:parameter name="itemid" value="<%= item_id %>"/>
              </bsp:call>
    </htmlb:documentBody>
</htmlb:document>
</htmlb:content>
The wrapper controller is called like this: item.do?itemid=1234.
How does is works? The wrappercontroller gets a request -> it gets the itemid from the url -> it opens the view and fills the page attribute item_id. In the view the bsp:call extension will create a new item controller instance everytime a unique item_id is used.
regards
Thomas

How to get new notifications in extractor 2LIS_17_I0NOTIF .

Similar Messages

Maybe you are looking for