How to get nigpib 0.8.6 to work with 2.6 kernel?

I need to use NI PCI-GPIB cards with Fedora Core 3 (i.e. 2.6 kernel) on both x86 and x86_64 machines.
Has anyone been able to get the nigpib 0.8.6 code to compile and work for 2.6 kernels?

Hello,
You should check out the beta of NI-488.2 v2.3 which will run on specific linux distributions that have a 2.6 kernel (Mandrake 10.0, Suse 9.1). While we do not guarantee it to work on FC3, you will probably have better luck with it than 0.8.6. See www.ni.com/beta to sign up.
Scott B.
GPIB Software
National Instruments

Similar Messages

How to get Camera RAW / Photoshop CS5 to work with Canon 100D?

How to get Camera RAW / Photoshop CS5 to work with Canon 100D? I don't want to by this product again and again...

In what way is ACR not working in Bridge? Is there no right-click Open in Camera Raw available from Bridge, or there is, but the ACR version is less than ACR 6.7.1 or what exactly is the issue?
Also, if you open Photoshop and do Help / About Plug-ins / Camera Raw, is ACR missing from the list, or if not, what version does it say is installed?
You might also want to describe what methods you have tried to correct the issue, since saying you've tried what you've seen posted and they didn't work, isn't really much to go on.

How to get my iPod Classic 160 to work with my blu ray disc player

How do I get my iPod Classic 160 to work with my blu ray disc player?

Whats the model of the blu ray player?
I'm assuming you would have to to buy a dock or AV cables that connects to ipod and correspond with the model of player.

How to get JDev 10.1.2/ADF working with MS SQL Server Identity Column

Hello JDevTeam & JDevelopers,
I want to use JDev/ADF with a MS SQL Server 2005 database that contains tables employing IDENTITY Columns.
Using JDev/ADF and DBSequence with an Oracle database employing before triggers/sequences accomplishes what I am trying to do except I want to accomplish the same thing using a MSSQL Server 2005 database. Unfortunately I cannot change the database.
I have been able to select records but I am unable to insert records (due to my lack of knowledge) when using MS/SQL Server Identity Columns with JDev/ADF.
The following are the steps taken thus far.
Step1: Create table named test in the 2005 MSSQL Server (see script below).
Step2: Register 3rd Party JDBC Driver with JDeveloper; Using use Tools/Manage Libraries. Create a new entry in User Libraries with the following;
     Library Name     = Ms2005Jdbc
     Class Path     = C:\dev\Ms2005Jdbc\sqljdbc_1.0\enu\sqljdbc.jar
     (note: Latest TYPE 4 JDBC driver for Microsoft SQL Server 2005 - free at http://msdn.microsoft.com/data/ref/jdbc/)
Step3:Create New Database Connection;
     Connection Name = testconn1
     Type = Third Party JDBC Driver
     Authentication Username = sa, Password = password, Check Deploy Password
     Connection
          Driver Class = com.microsoft.sqlserver.jdbc.SQLServerDriver
          Library = Ms2005Jdbc
          Classpath = C:\dev\Ms2005Jdbc\sqljdbc_1.0\enu
          URL = jdbc:sqlserver://192.168.1.151:1433;instanceName=sqlexpress;databaseName=test
     Test Connection = Success!
Step5: Create a new application workspace using Web Application default template
Step6: In Model project, Create new Business Components Diagram.
Step7: Create new Entity Object. Goto to connections/testconn1, open tables and drag table test onto the diagram.
Step8: Generate Default Data Model Components by right-clicking on Entity Object. Except all the defaults.
When I test the Appmodule I select the view object and can scroll through all the records without error. If I try to insert a record, I get JBO-27014: Attribute testid in test is required.
Going back to the EntityObject I deselect the Mandatory attribute and re-run the test. Now when I try to insert it accepts the value for testname but it does not update the PK testid like it would using an "JDev/ADF/DBSequence/Oracle database/before trigger/sequence" solution.
Going back to the EntityObject and selecting refresh on insert does not solve this problem either. Changing the URL connection string and adding "SelectMethod=cursor" did not help and changing the SQl Flavor to SQLServer produced errors in the Business Components Browser. I've tried overriding isAttributeChanged() and other things as well.
I am totally stuck! Can anyone provide a solution?
Thanks for you help,
BG...
Create table named test
use [testdb]
go
set ansi_nulls on
go
set quoted_identifier on
go
create table [test](
     [testid] [int] identity(0,1) not null,
     [testname] [nvarchar](50) collate sql_latin1_general_cp1_ci_as not null,
constraint [pk_test] primary key nonclustered
     [testid] asc
)with (pad_index = off, ignore_dup_key = off) on [primary]
) on [primary]

Figured it out!
When using the MS SQL Server 2000 Database with the MS JDBC 2000 Driver you specify the SQL Flavor to SQLServer. However setting the SQL Flavor to SQLServer with MS SQL Server 2005 Database and the MS JDBC 2005 Driver will *** fail ***.
When working with the MS SQL Server 2005 Database and the MS JDBC 2005 Driver you set the SQL Flavor to SQL92 and the Type Map to Java.
If using a named instance like I am you would specify the URL = jdbc:sqlserver://<db host ip address>:<listening port>;instanceName=<your instance name>;selectMethod=cursor;databaseName=<your database name> (note: leave out the < >)
The 2005 Driver Class is different then the 2000 and is specified as com.microsoft.sqlserver.jdbc.SQLServerDriver
Note: In a default MS SQL Server 2005 installation the listening port will change *** everytime *** the host is restarted! You can override this though.
For the primary key you need to deselect the Mandatory attribute in the EntityObject editor.
Set Refresh on insert/update = no.
Set Updateable = never.
Now my Primary Keys which get their values from the Identity Column are working with ADF in a predictable way.
Simple enough but I have been away from this stuff for awhile.
BG...

How To Get Ipod Touch 2nd Gen to work with 64 bit Vista / Vista Ultimate

Okay, so I just got me a 2nd Gen Ipod Touch for X-Mas..I decided to take a break and get this puppy installed on my HP Tablet. Like many of you, I struggled in frustrations. I hate Apple Support. Notice their method to resolve all of their issues in regards to Itunes not working or Touch not working is to just REINSTALL ITUNES....doesnt solve anything. I have a solution.
For many of you, this may work, for those that are experiencing the same problem, please read below.
What I am using:
HP Tablet TX1000
Platform: Windows Vista - Ultimate 64 Bit.
I downloaded the 64 bit version of Itunes 8.02...hoping the thing will work, and still after plugging in my brand new ipod... i get an error message saying.
"The IPOD you are using is not recognized by this version of Itunes, please delete and reinstall with 64 bit version of Itunes."
However I did install the 64 bit version of ITUNES on my Vista. Before you guys delete and reinstall again. Do this first to confirm that my solution will help.
Open up Itunes, go to help, click on Run Diagnostics. Select only, Ipod/Iphone Connectivity tests and hit next.
If your Apple Mobile Device Service is RED, it means its not installed or not activated. Please read apple forums for the reactivation of AMDS. *If you are like me and did that help, and realized its not installed,* something on vista is preventing the install.
Do the following.
1) Delete ITUNES Completely. When asked for a restart, click No.
2) Go to the C:\Program Files\Common Files and look for the Apple Folder and delete that puppy too.
3) Redownload the 64 bit Installed and save to your desktop. You will need this later. DONT INSTALL NOW.
4) Go to the Start/Circle Menu and on the bottom, type RUN in the Search and select the Run Program.
4) Type msconfig and hit enter.
5) When the Program pops up, in the General, DE-select normal startup and select. SELECTIVE START UP. and deselect/leave blank START UP ITEMS
6) Move over to the Start Up Tab, DESELECT ANY VIRUS SCAN PROGRAM You Have Running.
7) Click Apply then OKAY, and Exit that window.
8) Now RESTART your computer.
9) Reinstall ITUNES as done before.
10) Go to HELP...run the diagnostics as before and your Apple Mobile Device should be green Now.
11) Close that window. Connect your IPOD.
12) iTUNES should now recognize your IPOD.
After it works. Go back to MSCONFIG...and on General, put Normal Start Up. Click Okay. Restart.
Hope that works.
If IPOD is still not recognized, then its a driver issue and I dont know.
The problem I was having was due to Apple Mobile Device Services not being installed.
Sincerely,
Dr. SkiLLz. M.D.

This is an Answer for a Possible Solution. It worked for me and is still working. The issue I was having with my 64 bit vista, was Apple Mobile Device Service was not being installed, I dont know why. But I disabled any active running program through MSCONFIG, to allow a clean uninterrupted install of ITUNES 8.02. This allowed AMDS and drives from ITUNES to install. Hope this works for most of you.
APPLE, please review your Support Methods. Re-installing doesnt help an issue that resulted from installing.

How to get SRWC Lock Screen Utility to work with VDI 3.2

I have installed VDI 3.2 in demo mode, PCSC-lite 1.3, and also installed the SRWC-Lockscreen-0.3 package. I have setup the Sun Ray to only use smart cards. I have a virtual Windows 2003 Server terminal server offered by VMware, setup in the Microsoft Remote Desktop desktop provider. After installing the SRWC-Lockscreen utility by issuing the ./install.sh script with no errors, I insert a smart card and log in to the 2003 terminal server with no problems. Although, when I remove the smart card and re-insert it, the session is not locked.
Is there anything else to run or check to get this function to work? The README with the Lockscreen utility states where the files are installed and I have verified these locations.
What am I doing wrong?
Thanks!

Yes, ran the script to install.
There is a link for "/usr/dt/config/Xsession.d/1200.WinLock" pointing to "/opt/SRSS-Addons/WinLock/1200.WinLock"
But after I start a session, I do not see the utaction that calls the xvkbd process. I see other utactions as follows:
(run as utku0) /opt/SUNWut/bin/utaction -t 300 -d /opt/SUNWvda/lib/vda-client -a cardRemoved -
(run as root) /opt/SUNWut/bin/utaction -t 12000 -i -e -d /opt/SUNWkio/bin/kioskrestart || /op
(run as utku0) /opt/SUNWut/bin/utaction -d /etc/opt/SUNWkio/sessions/vda/vda-cardremoved
(run as root) /opt/SUNWut/bin/utaction -x /usr/lib/smartcard/pcscd -k -x :9 -P 3786
Thanks!

Any suggestion on how to get a HP photosmart P1000 to work with windows 7

I have a Hp photosmart p1000 printer which is not supported in windows 7. Any suggestion or work around.

Use the Deskjet 970 driver available through Windows Update.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How to get older verison of itunes to work with newest ipod touch iOS

Downgraded to 10.4.1 itunes cause 10.5 is so messed up i cant do anything with it. But not able to sync or connect ipod to itunes cause of newest iOS... =[ help please!

iOS 5 requires iTunes 10.5 or later. You'll need to upgrade iTunes again...
tt2

How to get Asus VG278H 3D monitor to work with MSI GT70 0NC-002US?

So I just got this monitor for Christmas and it works great in 2D, but my Nvidia control panel will not show the option to set up stereoscopic 3D, I know this laptop is definitely capable of supporting 3D as it has a GTX670m graphics card, and MSI states this in the product description. I have contacted Nvidia customer support, but they weren't able to help, I have updated the graphics card drivers, and am connecting the laptop to the monitor with an HDMI cable. Please help if you can!

Quote from: flobelix on 31-December-12, 00:28:20
There is no hint on product site for this notebook being 3D Vision certified. As this is a notebook it takes not just the gpu but also the screen to be 3D Vision certified. Even if it would be I highly doubt it would work on an add-on screen and not just the notebook's screen.
Sadly....this notebook is 3D Vision certified.....If you actually check the product page, it's one of the major things that are pointed out. Actually, I guess the link I have is for the 0NE (which is what I have), but still...The ONC and OND should be the same.
http://www.msi.com/product/nb/GT70-0NE.html
Right there at the end of all the graphics information it talks about 3D Vision. =/
The 0NC is a bit different. It lacks all mention of 3D Vision. =/
Now....the worst part. 3D Vision requires a Dual Link DVI connection, which this laptop lacks. HDMI is only comparable to a single-link DVI connection as well. That being said, you're pretty much out of luck when it comes to using the monitor in 3D Mode. Especially with the next part....
Lastly.....taken from http://www.techjailbreak.com/msi-gt70-0ne-255fr-gaming-laptop-complete-review-and-specs/ which is for the GT70-0NE....
Quote
Finally, note that the GTX 680M is compatible with all technologies Nvidia (PhysX, Optimus, etc..) but some of them (such as 3D Vision) cannot be used on the machine, for lack of suitable 3D display. However, if you have the glasses and a 3D Vision screen, nothing prevents you from connecting the MSI GT70 via HDMI and 3D gaming (720p only).
I hate to say it, but it really looks like you're out of luck when it comes to using that monitor for 3D.

Need to know how to get my apple account to sync up with a new email on my phone and delete the old one in a step by step process??

Need to know how to get my apple account to sync up with a new email on my phone and delete the old one in a step by step process??

After you change the account settings as I described below hold your finger on any app until they all wriggle, then tap the "-" on each purchased with her Apple ID. Press the HOME button when done. Then go to the App Store and buy or download the apps you want.

How can I get my hp Laserjet 1012 to work with Windows 7?

How can I get my hp Laserjet 1012 to work with Windows 7?

Here is a list of products that are not supported in the win7 OS. This product is listed there.
Products not supported in win7
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

I got a iphone 5 but it does not work on my MacBook with Mac OSx 10.5.8 it says i need OSX 10.6.8 but it will not download because I need OSX 10.6 but it would load either. How do I get the older operating system to work with the IPhone5?

I got a iphone 5 but it does not work on my MacBook with Mac OSx 10.5.8 it says i need OSX 10.6.8 but it will not download because I need OSX 10.6 but it would load either. How do I get the older operating system to work with the IPhone5?

You don't. Since you have an Intel Mac, buy a Mac OS X 10.6 DVD from the online Apple Store.
(71894)

I have a iPod touch and i installed it on my other laptop until i had just got another one it says unable to connect to iTunes and i forgot my password and i delete the email and i don't know how i can get my i pod touch to work with my new one email

I have a iPod touch and i installed it on my other laptop until i had just got another one it says unable to connect to iTunes and i forgot my password and i delete the email and i don't know how i can get my i pod touch to work with my new one email.
I JUST NEED HELP

I would contact Apple under your warranty. I doubt you received a new iPod since Apple's policy is to give you a refurbished iPod.

Any info on how to get iCloud calendar, contacts, etc to sync with office 365 on macbook pro?, any info on how to get iCloud calendar, contacts, etc to sync with office 365 on macbook pro?

Any info on how to get icloud calendar, contacts, etc to sync with office 365 on macbook pro?

You can't, there is no connection between the services, use one or the other.

How to get shipped orders, unshipped orders and orders with open deliverie

Hi
how to get shipped orders, unshipped orders and orders with open deliveries
can anybody answer this.
points would be rewrded
Thanks

Hi,
You can check in the VBUK table for the status of an order. If you do a Query on VBUK table to get all the orders whose delivery status is not 'C' or the total goods movement status is not 'C' you get to know the orders not yet shipped.
Hope this helps. Reqard points if useful.
David.

How to get nigpib 0.8.6 to work with 2.6 kernel?

Similar Messages

Maybe you are looking for