How to get notes to work on iCloud
I am trying to get my Notes to work on iCloud but it keeps asking me to create a me.com account.
I do not use a me.com account for iCloud
Thanks for you reply Julian.
I do have a me.com address but it asks me to create one.
When i put my address in it says this address is already in use
Similar Messages
-
i have purchased itunes match but the cloud will not load on my ipad 4.it works on my iphone 5 & it originally worked on my ipad.the only music that will show up is stuff that i bought from the itunes store.any ideas on how to get this to work?
On the MBP, in iTunes, switch to Song view and enable the iCloud Status column by pulling down View > View options and selecting the option for "iCloud Status." Close the small window. Look for any tracks that have a status of "waiting." If you see several of them disable iTunes Match while holding down the Option key. Quit iTunes, wait a few seconds, then open it again and turn iTM back on. Let it compelete the scan. Wait until all tracks that are "waiting" have a status of either "matched" or "uploaded."
On the iPad, turn off iTunes Match then launch the Music app and let the contents clear out. Power cycle the iPad for good measure, then re-enable the service once all the tracks in iTunes have been processed. -
Facebook like button is not working, I have used the muse widget and created code from facebook. Does anyone know how to get this to work?
Hi connally25,
Below is a link to a video tutorial on how to add a Facebook Log button, please check if you have followed the same steps to add the video.
http://tv.adobe.com/watch/learn-adobe-muse-cc/adding-a-facebook-like-button/
If you have followed the steps correctly and the button still does not work; here is a link to a forum thread which might help solving the issue:
Facebook Follow Widget not working
Regards
Sonam -
I have a 4s iPhone which I loaded the new Os on last night. Now I can not connect to iTunes. A message comes up saying i need 10.6.3 or later but I am running 10.6.1 as I have an older Mac. Anyone have ideas how to get this to work?
Its not telling you to update your iPad, its telling you you need to download a recent version itunes on your computer.
Go here to download the newest version of iTunes.
http://www.apple.com/itunes/?cid=OAS-US-DOMAINS-itunes.com -
My itunes store won't open. Any suggestions on how to get this to work? I've already downloaded the newest version of itunes. I'm also not sure what Mac operating system I have..
To find the version of Mac OS X on your computer, all you have to do is click the Apple logo and then About this Mac. For more info, take a look at this doc -> Finding your OS X version and build information
Do you see an error when you try to open the iTunes Store on your Mac?
This Apple doc is a good place to start -> iTunes: Advanced iTunes Store troubleshooting -
I'm trying to connect my iPad to my Samsung galaxy s by bluetooth but the ipad will pair with it but not connect and says "its not supported" does anyone know what this means and how I get it to work?
iOS devices do not have the BT profiles that support file sharing and othr general functions. See:
iOS: Supported Bluetooth profiles
Basically it support headphones, keyboards, speakers, peer-to-peer gaming -
can anyone tell me how to get crossfade to work...was working ok, but now for some reason when i click on a track and try to drag on a fade it just highlights the track but does not leave a fade on?
Hello mate!
Are you sure u have the option on the up-right side of the arrange window checked to x-fade? -
Any suggestions on how to get wifi to work? I have a multitech router and can connect with a computer wirelessly but not the ipad.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398 -
How to get Google Gmail working in Yosemite? (not just in Mail)
How to get Google Gmail working in Yosemite? Mail is working. Gmail is coming to Mail. I want to use gmail in Google on the web as I have in the past.
MrAtheist wrote:
It's even an irony that this forum doesnt work on safari at all. All the buttons are just ... buttons. Nothing works when you click on it (i.e. filtering, tagging, etc).
Even more ironic is the fact that I use nothing but Safari, and it works correctly in Gmail, as well as on this site. -
How to get to a 2nd Free iCloud Email Accounts under one Apple ID
How to get to a 2nd Free iCloud Email Accounts under one Apple ID.
I just got my iphone 5 and I setup a icloud [email protected] with the email address. I am also using this as my Apple ID now due to I could not use it in facetime or imessge without doing that. How do I setup a 2nd Free Icloud email account that will work with facetime and imessage within the same Apple ID.Have a look here: http://www.apple.com/itunes/inside-itunes/2010/11/using-itunes-allowances-with-y our-kids.html
Cheers. -
How to get Messages to work with a proxy server?
at work we use a proxy server.
some icloud programs work, but Messages does not.
any idea how to get this to work through a proxy server?
thanks.Hi,
Now I feel really silly.
I remember the pane looking like this though:-
As there used to be two iChat forums here at Apple Support Communities and the older iChat 2.1 one has disappeared I am not sure how many threads might be available for scrutiny on this matter.
AS I said I don't ever recall someone reporting that they got it to work.
During early version of iChat it was found that the AIM server would accept a login on almost any port.
It became popular to suggest port 443 as this was a well known port known to be open on most routers "out-of-the-box" and likely to be open in campus situations where students may not have any control over what ports were open.
An AIM Login can also do "Direct IMs" for which is switches to port 5190 on the UDP Protocol.
At this point the chat is peer to peer.
It does this if you send a pic in the Chat or send a file.
It uses port 5190 for this no matter what is used for the Login.
7:27 PM Thursday; May 9, 2013
iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images." No, Seriously -
When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly. Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal. In mixed mode it works fine both placed. Any ideas on how to get 5.0 working? I thought 5.0Ghz was supposed to have a wider range. Do I need to change a setting on the Macbook Pro?
Thanks, WI'm not sure if you understand that 5 GHz has some upsides, but also some very significant downsides.
The upside is that the 5 GHz signal will allow faster speeds.
The downside is that you must always give up something in order to gain something else.Unfortunately, the marketing hype about 5 GHz does not go into very many details about this.
In the case of 5 GHz, the 5 GHz signals are much weaker than 2.4 GHz signals, so they do not travel as far or penetrate any obstructions like walls or ceilings nearly as well as 2.4 GHz signals. In many cases, in order to get good 5 Ghz performance, you literally have to have almost a line-of-sight relationship between your computer and the wireless router.
If you have a new dual band router, which broadcasts both a 2.4 GHz and 5 GHz signal simutaneously, your Mac will connect to the best signal quality automatically depending on its location in relation to the router. In the same room, without any obstructions, it will connec to 5 GHz. But, take the laptop down the hall a few rooms and around the corner and the Mac will connect to the 2.4 GHz signal because at that location, the 2.4 GHz signal is not only stronger, it is also faster. -
I'm trying to use speech recognition to input text on my iMac running the latest mountain lion, 10.8.3.
I have sticky keys enabled.
When I try to start speaking by pressing the function key twice nothing happens. I can only get it to work if I disable sticky keys.
The same problem occurs with all the other modifier keys as shortcut, they do not work with sticky keys.
When I try to select a different shortcut, I am unable to select a two key combination, but am limited to one.
If I select the F6 key, or any other single key, I am able to start speech recognition. However the second time that I press the key, it does not stop recognition and process my words. Instead, it restarts the recognition.
Has anyone figured out how to get speech recognition working with sticky keys enabled?
Or a way to get an individual key shortcut to start on the first press and process it on the second?
Or a way to get key combinations to work, as specified by the help:
Dictation On and Off
To use Dictation, click On.
When you’re ready to dictate text, place the insertion point where you want the dictated text to appear and press the Fn (function) key twice. When you see the lighted microphone icon and hear a beep, the microphone is ready for you to speak your text.
Shortcut
By default, you press the Fn (Function) key twice to start dictation. If you like, you can choose a different shortcut from the menu.
To create a shortcut that’s not in the list, choose Customize, and then press the keys you want to use. You can press two or more keys to create your shortcut.I noticed with version 10.8.4 of OS X that I am now able to select F6 to activate, and the return key to complete the speech recognition. This is still different than the description of how these should function that's included in the help, but at least it's an improvement.
-
I have just updated to OS X 10.9 and now find that I can't open Aperture to access photos etc, message reads : You can't use this version of the application "Aperture" with this version of OS X. You have "Aperture" 3.2.3... whichj is not a lot of help, i have limited technical ability and all i need to know is how to get Aperture to work again...help !
Software Update?
-
How to get showDocument to work
I tried to pop up a broswer to show an image using showDocument. However, I tried it with the 2 methods as in the attachment, and they both failed. (those 2 methods were tried at different times)
Besides, I found in the Java Doc (http://java.sun.com/j2se/1.4.2/docs/api/java/applet/AppletContext.html) saying under the showDocument that An applet viewer or browser is free to ignore .
Can you please kindly tell me what that mean? And can you teach me how to get the showDocument works? Thank you very much.
public class ccdApp extends Applet
public void init()
try
try {
// Method 1
URL url = new URL(getDocumentBase(), "http://10.1.100.120/png/DSC01400.png");
getAppletContext().showDocument(url,"_blank");
// Method 2
getAppletContext().showDocument
(new URL( "http://10.1.100.120/png/DSC01400.png"), "_blank");
catch (MalformedURLException e) {
e.printStackTrace();
}Help, I tried to get this code to work I found on how to use showDocument()?
import java.applet.Applet;
import java.net.*;
import java.awt.*;
import java.awt.event.*;
* <applet code=ShowDocApplet.class width = 300 height=300> <parame
* name="target" value="b"> <parame name="url" value="http://www.yahoo.com">
* </applet>
public class ShowDocApplet extends Applet {
public void init() {
final Button act = new Button("Show Doc");
// For Testing purpose
final String url = "http://java.sun.com";
final String target = "_blank";
* //For ur Application final String url = getParameter("url"); final
* String target = getParameter("target");
act.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent ae) {
try {
getAppletContext().showDocument(new URL(url), target);
System.out.println("Made it to try block");
} catch (MalformedURLException e) {
showStatus(url + " NOT FOUND");
add(act);
Note: I am using Eclipse 3.2 and I got it to compile and to run as an applet, but when I push the button nothing at all happens. Help
Maybe you are looking for
-
Hello, I installed an EP6 SP2 with SSO to our R/3, BW and CRM system with logon tickets, it works fine. Now I tryed to connect the SAP Service Marketplace with user mapping. I created a system from com.sap.portal.howtos.webapp.WebApplication and than
-
Problem with Dates in ADF Calendar (Possibly Oracle 9i related?)
Hi All, I have an entity and up-datable view object based on the following table CREATE TABLE IM_CALENDAR ID VARCHAR2(32 BYTE), START_TIME DATE, END_TIME DATE, PROVIDER_ID VARCHAR2(32 BYTE), TITLE VARCHAR2(256 BYTE), RECURRING VARCHAR2(32 BYTE), REMI
-
Apple TV signal goes on and off on my TV HDMI source
My apple TV works fine when rebooted but once I try to change the source on my TV the TV has trouble recognizing the ATV signal. it goes on/off on the tv screen.
-
Dear All, In number range VN01 I have 98 records. I need one more range, But when doing this getting the information: "Enter inverval without overlap" So, I can not add the range. Is there anybody to hlep me to over come. Thanks N B/R Bishnu 26/11
-
Problem Transporting Web Forms
Hi Experts, I have been trying to export the custom web forms from POC server to Dev server. But then i'm not able to find the web form in the target server.. For exporting i followed this method.. Content Administration KM Content Export Pendi