How to get OEM DVD Duplicate One ?

I have original windows server 2012 standard edition 64bit unfortunately that DVD is not working now i want re install my server How can i get new DVD or where i could download

On 2/11/2015 3:46 AM, Velavan.S wrote:
I have original windows server 2012 standard edition 64bit unfortunately that DVD is not working now i want re install my server How can i get new DVD or where i could download
http://social.Technet.microsoft.com/Forums/en-US/smallbusinessserver/thread/ad3c568b-54cd-4ff6-bce9-69cbd7ab1494#ad3c568b-54cd-4ff6-bce9-69cbd7ab1494
This should answer most of your questions.
Converting a current evaluation version to a current retail version
You can convert the evaluation version of Windows Server 2012 R2 Standard to either Windows Server 2012 R2 Standard (retail) or Datacenter (retail). Similarly, you can convert the evaluation version of Windows Server 2012 R2 Datacenter to the retail version.
Before you attempt to convert from evaluation to retail, verify that your server is actually running an evaluation version. To do this, do either of the following:
From an elevated command prompt, run slmgr.vbs /dlv; evaluation versions will include “EVAL” in the output.
From the Start screen, open Control Panel. Open System and Security, and then System. View Windows activation status in the Windows activation area of the System page. Click View details in Windows activation for more information about your Windows activation
status.
If you have already activated Windows, the Desktop shows the time remaining in the evaluation period.
If the server is running a retail version instead of an evaluation version, see the “Upgrading previous retail versions of Windows Server to Windows Server 2012 R2” section of this topic for instructions to upgrade to Windows Server 2012.
For Windows Server 2012 Essentials: You can convert to the full retail version by entering a retail, volume license, or OEM key in the command slmgr.vbs.
If the server is running an evaluation version of Windows Server 2012 Standard or Windows Server 2012 Datacenter, you can convert it to a retail version as follows:
If the server is a domain controller, you cannot convert it to a retail version. In this case, install an additional domain controller on a server that runs a retail version and remove AD DS from the domain controller that runs on the evaluation version. For
more information, see
http://technet.microsoft.com/en-us/library/hh994618.aspx.
Read the license terms.
From an elevated command prompt, determine the current edition name with the command DISM /online /Get-CurrentEdition. Make note of the edition ID, an abbreviated form of the edition name. Then run DISM /online /Set-Edition:<edition ID> /ProductKey:XXXXX-XXXXX-XXXXX-XXXXX-XXXXX
/AcceptEula, providing the edition ID and a retail product key. The server will restart twice.
For the evaluation version of Windows Server 2012 Standard, you can also convert to the retail version of Windows Server 2012 Datacenter in one step using this same command and the appropriate product key.

Similar Messages

HT2499 how to get mac dvd player not to play all and stop at each title?

how to get mac dvd player not to play all and stop at each title

Play all chapters, i mean.
I have a DVD and I would like to just play a chapter, and discuss it, without the next chapter automatically starting. Usually DVD players have the "Play all" you can turn off and on...but I don't see it with the Mac player.
OS 10.4.
Macbook 6
Thanks so much!

How do get rid of duplicate ppc apps on launch pad?

How do get rid of duplicate ppc apps on launch pad?

since they are ppc apps and cannot be used in lion, delete them and they will be removed from launchpad. or if you just cant bare to delete that copy of appleworks, move it out of the applications folder and it will no longer appear
-mvimp

How to get rid of duplicate files in Windows Media Player 11, I am seeking an answer if at all possible.

I don't know if this is the appropriate forum to ask this question....if it is not please guide me to the correct support forum. I am just trying to find out if there is an easier way of getting rid of duplicate files in my Windows Media Player 11.
Also how do I prevent my Media player from obtaining all these duplicate files from other libraries. I have iTunes installed and my home network has four other computers belonging in the home group that have all their own respective music libraries.
I guess I was naïve but I thought that when Windows Media Player is out searching other libraries it would know not to take duplicates of songs that it has already. Enough said .....if anyone out there can help me that would be great. I have in
the past spent many hours manually deleting songs from my music files and it really got old.

Unfortunately your post is off topic here, in the TechNet Site Feedback forum, because it is not Feedback about the TechNet Website or Subscription. This is a standard response I’ve written up in advance to help many people (thousands, really.)
who post their question in this forum in error, but please don’t ignore it. The links I share below I’ve collected to help you get right where you need to go with your issue.
For technical issues with Microsoft products that you would run into as an
end user of those products, one great source of info and help is
http://answers.microsoft.com, which has sections for Windows, Hotmail, Office, IE, and other products. Office related forums are also here:
http://office.microsoft.com/en-us/support/contact-us-FX103894077.aspx
For Technical issues with Microsoft products that you might have as an
IT professional (like technical installation issues, or other IT issues), you should head to the TechNet Discussion forums at
http://social.technet.microsoft.com/forums/en-us, and search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), you should head to the MSDN discussion forums at
http://social.msdn.microsoft.com/forums/en-us, and search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here:
http://community.dynamics.com/
If you really think your issue is related to the subscription or the TechNet Website, and I screwed up, I apologize! Please repost your question to the discussion forum and include much more detail about your problem, that could include screenshots
of the issue (do not include subscription information or product keys in your screenshots!), and/or links to the problem you’re seeing.
If you really had no idea where to post this question but you still posted it here, you still shouldn’t have because we have a forum just for you! It’s called the Where is the forum for…? forum and it’s here:
http://social.msdn.microsoft.com/forums/en-us/whatforum/
Moving to off topic.
Thanks, Mike
MSDN and TechNet Subscriptions Support

How to get a dvd to play on my air using a samsung se-208 reader?

i have been trying to get a dvd to pla and it just won't work! can anyone tell me step by step how to do it?
thanks,

Thanks for your thoughts, but unfortunately, I can't dictate what kind of technology my clients use. My target audience is almost always government employees, who don't get the luxury of using dual-tower macs. No one has to convince me that Macs and Mac OS are superior platforms. What I can't quite believe is that there's not anything wrong with either my process or with the code written by DVDSP. I have no idea why iDVD writes readable discs but DVDSP does not. That seems to be a problem with Steve Jobs, not Bill Gates. If commercial DVDs play successfully on Windows XP and the discs written by DVDSP don't, then I have to assume that there's something wrong with either DVDSP or my use of it.
Currently I'm shooting out on the road right now, so I can't do much, but I wonder if these are some potential solutions:
1. Reinstall DVDSP (unlikely to be successful since this problem has persisted throughout many upgrades and several generations of top-of-the-line Macs.)
2. Upgrade to a DVD-5 burner. (Can anyone recommend a good piece of hardware? Will this make my projects more like commercial discs?)
3. Move some things around in VTS view to solve potential problems(I've never done much with this, so I could use some help)
4. Switch to some other DVD authoring software
Although I philosophically agree that the problem resides in Windows XP, I have to make this my problem on behalf of the thousands of clients of my clients across the country. They just don't have the ability to 'Make the Switch.' And when they rent a commercial disc at Blockbuster and it works on their machine, and my disc doesn't, it makes me (AND Apple) look bad.
I can't believe that I'm the only person to have this problem, but I haven't found anything else on the discussion board. Hopefully it's something that I'm doing. It would be the first time in my experience that there would be an inherent problem within any Mac problem. Thanks for any help out there.

Does anybody know how to get help with this one?

Hello there!
I wanted to get an advice on how to get in touch with the appropriate person at BT that could help with my situation.
I have tried telephone help, complaints by email and unfortunately still waiting for somebody from the customer services to help me out.
I have recently moved home. I contacted BT on 26th June to organise the line transfer to the new address. The date was set for 18th July. I also ordered line rental saver and paid for it over the phone. All went smooth, telephone and broadband was working fine at the new place, but on the 23rd July I was sent an email that "BT is sorry that I am leaving".
I thought it was a mistake, but the lady in the on-line chat said somebody stopped my service. Later she rang and left a message saying that I must have requested to move to another provider. Did not manage to speak to her again, but phoned the help line this time.
There a gentleman was trying to convince me that I called BT and cancelled my service on the 18th July and to him I was not a BT customer anymore. The truth is that I did not request to stop my service, anyway - why would I do that after paying for a year in advance. This has no logic, but because computer says so then he thinks I did it.
He also added that my account is a 'mess'. He then promised that somebody would get in touch to sort it out as my line rental was gone and my phone and internet could go off any minute.
I did not get any help. After that I wrote to them 3 email complaints to request assistance. They called and aknowledge they will help, but 3 weeks down the line nothing was done to explain the situation. Left the messages to the person from email complaints to ring me or email me -never happened.
Last week I got 2 emails welcoming me to BT and outlining the call plans that were diferent from each other and the one I agreed to on the 25th June. When I called help line 2 days ago a lady confirmed on which one I am on, but could not sort out the most annoying thing - the 'final' bill.
I was sent a bill for over 200 pounds due to premature termination of phone and broadband service , which I never ordered. They already took the money this week. My line saver is gone as well. So I am 360 pounds short. I aslo have no access to myBT to monitor my phone activity or make orders.They also did not send any confrimation of the call plan I am currently on.
It is a very annoying situation, because somebody at BT made an error and I am unable to get to anybody that could help. Everytime you call the help line you speak to somebody else and despite me thinking the email complaints would be the way forward they are not. Would appreciate some advice on how to tackle these issues: false accusations from them, inappropriate billing, problem with myBT.
Thanks Lukasz

Hi lbadek
I can help with this please send us an email using the contact the mods link in my proifle and we will investigated from there.
Thanks
Stuart
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

How to get rid of duplicate addresses all over the place?

Duplicate addresses appears all over the places: on my mac (in the mail program) and in my ios devices.
I suspect that it occurs during some synchronisation activities but how to get rid of this once and for all?
Thanks for your help. It helps also if some tell me that I am not alone in that kind of trouble

iCloud- Resolving duplicate Contacts after setting up iCloud Contacts

How to get multiple photos as one clip in imovie?

i have 13 school photos that i want to include in an imovie slideshow project. i wanted them to scroll from left to right, but can't seem to get them all in one clip. is there a way to do this? i found a way to do it by adding all 13 pictures into one photo using photobucket, but when i import that massive photo into imovie, it is such poor quality that it isn't worth it. please help. i'm going crazy over here.

In that case, I have never done this before, but here is how I would approach it.
In Photoshop, or similar app, I would create a photo that is 1080pixels high or bigger and wide enough to hold all pictures.
I would place all photos in here and export as a single photo.
In iMovie, I would set the image to Ken Burns, with the starting rectangle on the first photo, and the ending rectangle on the last photo.

HT1417 how to get rid of duplicates in itunes 11

I cannot find where to get rid of duplicates in the new version of itunes, which I cannot stand. Can I go back to the old one, where it would let you find duplicates and delete them?

OK I understand. Many of the old iTunes 10 features are still present, but they have been hidden by default.
Bring back your Sidebar with control S and your menu bar with control B. There are icons for them but the control keys are easier to describe.
The View menu will then be visible, where you can customize your viewing preferences and make it appear a little more familiar.
You don't have to remove the old version to update it.
Reverting to iTunes 10 is possible but very tedious.

How to get certificate from sun one directory server

I have installed sun one directory server 5.2. Now in order to connect to the server through ldap protocol i need certificate on the client side.
How to get the certificate from the sun one directory server...??
( Earlier i tried the same procedure with active directory .and i got the certificate successfully ...as well as ldap authentication..but don't know what to do with the sun one..???)
Any tips on this issue will be helpful
thank you

You didn't make mention of setting up ssl on the server side, so search these boards for openssl. Some nice person uploaded an nice example of how do use openssl to do this.
To get the ssl certs for the solaris-client ssl authentication ( tls:simple ) to work you will need to use netscape to connect to the ssl port to get the right format. There are comments in that same doc on how to do that.

How to get a dvd onto the video tab only on itunes

i want to get a dvd onto the video tab only on itunes and not on my ipod how do i do that?

haha, do you copy and paste that all the time cause i swear ive seen that answer more than once. nice time saver though, since theres always new posts about getting videos onto ipod.

How to get the Organizational Unit One level up

Hi
Does any one know any function module to get the org unit one level up by giving the current Organizational unit as input. Please reply very urgent.

Hello Nirmal
I am usually using the following function module to read to OM:
* SAP_SORG
* OrgStructure with assigned orgunits)
 REFRESH: lt_struc.
 CALL FUNCTION 'RHPH_STRUCTURE_READ'
 EXPORTING
 plvar = '01' " active Planvar.
 otype = 'O' " OrgUnit
 objid = l_wa_cb1-objid " Toplevel-Node
 wegid = 'SAP_SORG'
 begda = iw_begda
 endda = iw_endda
 pup_info = 'X'
 with_stext = 'X'
 tdepth = 0 " alle Sub-Levels
 TABLES
 stru_tab = lt_struc
 EXCEPTIONS
 catalogue_problem = 1
 root_not_found = 2
 wegid_not_found = 3.
The parameter WEGID is the crucial on which determines the objects that are read from the OM. In your case you will need WEGID = 'A002' (reports (line) to).
To understand the evaluation path (WEGID) better have a look at transaction PPST.
Regards
Uwe

HELP! how to get or download sun one certificate server 4.7

I had searched for a long while and had no found!
can anyone tell me how to buy or download sun one certificate server 4.7 ,netscape certificate server or iplanet CMS 4.2
thanks!

The SunOne certificate server was EOLed by Sun some time ago.
However, RedHat recently purchased Netscape Certificate server which is based on the same iPlanet codebase as SunOne but has numerous additional features including a smartcard and USB token management system.
Evaluation copies are available from redhat.com

How to get blank data wn one date is initial?

hi
im finding the difference between 2-dates...
below is my code......
my problm is wn there is no data in the gstri field then v_dat1 should be blank...but im getting zeros...
how to get blank instead of zero?
IF <fs_final>-gstrp is not INITIAL and
( <fs_final>-gstri is not INITIAL ) .
CALL FUNCTION '/SDF/CMO_DATETIME_DIFFERENCE'
EXPORTING
date1 = <fs_final>-gstrp
date2 = <fs_final>-gstri
IMPORTING
datediff = v_dat1
EXCEPTIONS
invalid_datetime = 1
OTHERS = 2.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
IF ( <fs_final>-gstrp GT <fs_final>-gstri ) AND
( NOT <fs_final>-gstri IS INITIAL ) .
v_dat1 = -1 * v_dat1.
ENDIF.
Regards
Smitha

HI,
The type defination of date difference is P whose default value is 0. for that reason you are getting 0 in v_dat1. and thats why it can't be blank.
if you using the v_dat1 for futher processing than you can first check whether v_dat1 is 0 or not then you can proceed with your logic...
OR
other think you have to delcare another variable of type char, assign your v_dat1 and then SHIFT <char var> LEFT DELETING LEADING '0'.
Hope it helps

I've gotten myself into the FRENCH iStore and don't know how to get back to the one in the USA. Does anyone know how to do this?

I wanted to buy a song from Midnight in Paris but couldn't get it in the USA, so got into the French ITunes Store. I got there and now can't get back to the USA iTunes store because (1) I don't know how to speak French and (2) I have no clue how to get back. Can someone help me?

Hi. Try this: From the iTunes Store front page, scroll to the bottom of the page. In the bottom left corner there should be a flag, in this case the French flag, click it and you 'll be presented with a screen to select the correct country.
Stedman

How to get OEM DVD Duplicate One ?

Similar Messages

Maybe you are looking for