How to get OID installed?

I have installed 8.1.7.0.0 Enterprise Edition, but cannot for the life of me figure out how to get OID installed. I have run the universal installer, but don't seem to see it anywhere. Can anyone please enlighten me.
Thanks,
Phil

Hi Phil:
As you have discovered, just doing a database installation will not install OID. When you bring up the OUI instead
of selecting a database insallation select the bottom selection which I beleive is called Management Infrastructure.
After selecting this you will get another screen of selections of which Oracle Internet Direcotry will be one of the
choices. Durring the installation OID will detect any existing database instances and ask you if you want to use one
of them. If you choose no to this it will install OID and a new isntance of the database at the same time.
Hope this helps,
Jay

Similar Messages

How to get and install the new MSI Bluetooth Software Package 1.4.3.3.

How to get and install the new MSI Bluetooth Software Package 1.4.3.3.
This little FAQ will only cover the new version of MSI Bluetooth Software Package.
First thing too do is unistall any older version of the MSI Bluetooth Software.
Do this through the Add/Remove program applet in your control panel.
There seams too be only through Live update you could get the new version of MSI Bluetooth Software Package.
If you can't see any enter for MSI Bluetooth Software in the Live driver section of Live update then you have too enter the following too your registry.
Create following code in Notepad and save it as MSILD.reg, then run the file.
;-->Code start
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\MSI\Drivers\MSI Bluetooth Software]
"DrvSetup"="1"
"Version"="1.4.2.10"
;-->Code end
Rerun the Live update and hopefully you will now see a entry for MSI Bluetooth Software in Live driver section.
Install the new version of MSI Bluetooth Software and reboot your computer. Even if the setup program doesnt told you too doit.
After rebooting the computer you will see the Bluetooth icon in the taskbar. If it's Red then try too start the Bluetooth services by right click on the try icon and the only alternetiv there is.
If the Bluetooth services is asking for a valid licens.dat then you should do the following.
Surf to Jon's Bluetooth guide http://www.jonsguides.com./bluetooth/prepare.html and download the patcher from the link there.
Unzip the the patcher and then run the BTWPatcher.exe program.
Now the Bluetooth services will start and you will bee able too configure your own settings for the Bluetooth services.
If nothing of this work you could try the complete Bluetooth solution at Jon's gudie and install the IBM version of the same program. I havent test this solution and will not do soo.

I have the MS-6968 device and i want to use driver 1.4.x or 3.0.x. I found the driver 1.4.2.10 but i cannot find any WIDCOMMSecurity code.
So, can anyone give me a link for BTWPatcher.exe???
It cannot be found here (Jon's Bluetooth ) anymore.
Thanks

How to get OIDs of indexes for class-map ?

I have policy-map configured on cisco router with some class-maps inside. I need to draw a graph traffic passing through these classes. To make a graphs I use Cacti which use SNMP query to draw the graphs (object name cbQosObjectsIndex).
How to get OIDs of class-map indexes ?
I tried to do this by following query:
#snmpwalk -c community_string -v 2c 192.168.0.252 1.3.6.1.4.1.9.9.166.1.5.1.1.1
but the answer was:
iso.3.6.1.4.1.9.9.166.1.5.1.1.1 = No Such Object available on this agent at this OID
The information i need is contained at the OID 1.3.6.1.4.1.9.9.166.1.15.1.1.7:
# snmpwalk -c community_string -v 2c 192.168.0.252 1.3.6.1.4.1.9.9.166.1.15.1.1.7
iso.3.6.1.4.1.9.9.166.1.15.1.1.7.1251.1277 = Gauge32: 0
iso.3.6.1.4.1.9.9.166.1.15.1.1.7.1251.13363 = Gauge32: 0
iso.3.6.1.4.1.9.9.166.1.15.1.1.7.1251.13383 = Gauge32: 0
iso.3.6.1.4.1.9.9.166.1.15.1.1.7.1251.13435 = Gauge32: 734000
iso.3.6.1.4.1.9.9.166.1.15.1.1.7.1251.13481 = Gauge32: 233000

Because 192.168.0.252 1.3.6.1.4.1.9.9.166.1.5.1.1.1 is marked "non-accessible" according to http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?local=en&translate=Translate&objectInput=cbQosObjectsIndex
You'll need to obtain the indices as explained in this blog post:
http://pierky.wordpress.com/2009/04/09/cisco-class-based-qos-snmp-mib-and-statistics-monitor-for-nms/
Joe wrote a very illustrative post on the subject of snmptables: https://supportforums.cisco.com/message/3051004#3051004
And if your IOS supports it, you would want to configure the following to keep the indices from changing after every reboot or OIR:
"snmp mib persist cbqos"

I was wondering how to get icloud installed on original iPad

I was wondering how to get icloud installed on original iPad

Freeing Up Space on The Hard Drive
1. See Lion's Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.

How to get win7 installed on optibay HDD on macbook pro

Hi all,
so I am in a bit of a pickle
I recently bought a new 15" MPB with an apple installed 128gb SSD drive.
My plan was to install a 2nd hard drive in the DVD spot, a 500gb with a 70ish GB win7 partition. I would like to use Win 7 for screencasting for windows tutorials and for Gaming...mostly for gaming
I thought, naively, that this would be a simple boot agent setup...boy was I wrong.
I have already installed the 500gb drive in the optibay, it is working fine
I did not realize that a macbook pro cannot boot to an external drive or dvd. I could be wrong here but all my research seems to indicate that it can't...using something like refit does not fix this problem
I tried going through the boot camp setup with my external dvd drive attached through USB...did not work
also tried a USB thumb drive...no dice
sooo
any ideas on how to get a win7 install on my 2nd drive?
I'd like to avoid having win7 on my 128gb ssd as there is limited space
can I install win7 on the drive on an actual windows machine and then transfer it to the macbook?
could I install the win7 partition to my ssd boot drive and then use Carbon Copy Cloner to clone the partition to the 500gb?
its actually kind of an interesting problem...but I'm stumped
any and all help appreciated.

I'm sure someone else who knows about this will pitch in. Although my monitor is HP 23 inch and has both VGA and HDMI and have no issues. I don't have the miniport to VGA connector so I can't test it out with the VGA. Sorry for my inconvenience.

How to get and install an older ISO on iphone 4s

I have an old iphone 4S I have kept only for my grandson to play games on. He likes Lasertag. the game worked fine until I updated to ISO7. I have reloaded Lasertag twice and it still will now work. I would like to reinstall ISO6 on this phone. I do not know how to get it nor how to reinstall it.
Please help. Jerry ****
<Edited by Host>

Apple does not support downgrading the iOS. I suggest you start a new question that gives a good title to a specific problem. Then in the body of the thread describe the problem in detail, tell us what steps you have tried so far to correct the problem, what happened, and what error messages you received.

How to get and install 10.2.0.3 patch for Oracle XE (express)

Total newby here, pardon the stupid question....
I've installed Oracle XE but I've been told I need the patch that updates the database to 10.2.0.3. I can only find a patch for Vista, I'm on XP. When I go to the metalink(?) page it says I need to have a support ID.
How do I get a support ID (free) for XE, or is there something I'm missing.
Thx,
Mark

1) Just for sanity, I'm assuming that you posted a Metalink Note ID, not a bug. Metalink Note 334968.1 refers to bug 3807408.
2) The patches referenced in that bug would appear to relate to the Oracle client. Assuming proper licenses, I would expect that you could patch the Oracle clients accessing the XE database and resolve the issue.
3) The Metalink note references an alternate workaround of installing Visual Studio in a non-default location that doesn't include parenthesis.
Justin

How to get and install old (version 8) Flash player ActiveX in IE?

I would like to install old Flash Active X controls into IE
in order to test if our software detects the version
properly.
If I download and install the old players available at
www.adobe.com
these do not seem to install the activeX: there are no
Flash*.ocx files
or registry entries as indicated in
http://kb.adobe.com/selfservice/viewContent.do?externalId=b0dba60b&sliceId=2
I have searched the knowledgebase/forums and posted in the
Flash player forum
but did not find/get an answer...
Bye
Jan

Jan, having massive Flash 9 problems too. Spoke to an AOL
tech guy and he told me download old versions of Macromedia Flash
at the website below. He said the site is very helpful and totally
legit. I'm trying it tonite myself. Unfortunately, they only do
Windows versions. Visit the site, lots of stuff there. Cheers,
Carol
http://www.oldversion.com

Can anyone tell me how to get Java installed?

I have tried to install java several times and it says it is installed yet I cannot find it anywhere on my Mac.

I am not sure what the permission repair is
The short version:Go to Applications>Utilities>Disk Utility and select your volume and then select Repair Permissions.
Same directions are also in the OS Mac Help Menu.

How to get and install a full feature HP driver for CM1312 MFP series for Mac OS v10.8?

Hi there,
I am running a Mac OS X v10.8 (in Portuguese) and trying to use a HP CM1312 FMP printer, with full features (double-side printing). In the meantime, I have also downloaded the latest driver/firmware from HP but it does not detect the printer. On the other hand, the printer works fine (except for the full feature part)...
In addition, when I go on the system preferences, there is no option for the printer "driver". Just the other 2 ones...
Anyone can help? It would be really good to have the printer fully working with my Mac!
Thanks in advance

Hi and here is the first round of thanks!
So, I have:
Downloaded the Apple driver
Reset the printer on the system preferences > printers & scan / fax
Chosen to install the printer
The system has automatically chosen the "driver" for the printer (HP Laserjet CM1312 MFP)
Have confirmed and installed
Now it shows the possibility of a "manual duplex" (double-sided) and it allows it to be chosen. Though, it doesn't print that way but rather the normal way: 1 side / 1 page... On the other hand, the option "driver" is still not available on the system preferences > print & scan / fax > options & supplies. This probably means that it won't allow a double-sided printing... (just a guess)
Do you have further knowledge?
Thanks

How to get a install dvd

My MacBookPro 2009 install dvd is scratched and can't be used anymore.
At the local apple store they could not provide me with a new one.
Is there a way i can download the dvd somewhere?
Ronnie

Call Applecare and request one. Have your systems serial number ready. There will be a nominal charge.
Regards,
Captfred

How to get back installed apps after a fresh install?

I would like to start a new installation, format Macintosh HD and reinstalling Snow Leopard. From that point carry on with Lion, Mountain Lion and, eventually but not sure, Mavericks. After the new install could be problems retriving all intalled apps from Applestore?
Thanks

My imac started with Snow Leopard, then after Lion and Mountain Lion i accepted the upgrade to Mavericks and i didn't appreciate the new interface and usage of some apps, i.e. iMovie. Meanwhile, even before Mavericks, os was slowing down, but even if a bit annoying and unusual still accetable. Consider that i have installed a bunch of apps regularly purchased, mainly fom Applestore. No fancy gadgets. So, as i didn't like that much Mavericks decided to restore from Time Machine. Possibly was a mistake and now i have an enviroment i feel i can't manage. Today, for instance iDvd shut down in an unaspected way three times and then i decided to reinstall. Agree Mac is not Win and, in fact, never had such a problem, but now i need, say for my interior peace, to start from a clean situation. That's why my question, what about my actally installed apps?
Thanks

How to get sybase installed options (15.7 sp110)?

Hello,
Company Team in charge of gathering licensing information about databases for managing provider relationship asked me for why they did not found any information about IMDB/RDDB with their script .
I have downloaded this option and copied it in license file.
On server where we don't use any IMDB/RDDB database we see nothing with sp_lmconfig or license_enabled. One sees nothing in Monlicense table too.
On server where we use IMDB/RDDB database we see what we use (ie RDDB or IMDB separately) with sp_lmconfig or license_enabled , and in Monlicense table too.
Is someone who knows if there is any way to know what is really installed in license file (even not used) ?
Regards
Marc

Hi Marc,
I think you are asking what license ASE is actually using compared to what is in the $SYBASE/SYSAM-2_0/licenses directory.
You can look at the ASE log file and compare this to what licenses are in the above location.
Example:
cat <server>.log
Sysam: Using licenses from: /redhead1/hansenr/ase/SYSAM-2_0/licenses/ase.lic:/redhead1/hansenr/ase/SYSAM-2_0/licenses/dir.lic
Sysam: Checked out license for 1 ASE_CORE (2015.0215/15-feb-2014/0CAF 2ED7 5678 1234) will expire Mon 16 Feb 201512:00:00 AM PST
Sysam: Checked out license for 1 ASE_DIRS (2015.02150/15-feb-2015/1699 B678 5678 1234) will expire ...
Here you can see I have 2 license files being picked up.
Also have 2 licenses being checked out by ASE.
To see what license is actually being picked up in a specific file check the "verification number".
ASE_CORE = 0CAF 2ED7 7489 1234
ASE_DIRS = 1699 B678 7F9C 0123
Yours will be different, but when searching the license files you should see these numbers and that is the specific license being picked up and used.
Licenses have this number 2 times. Make sure you have the full license.
Example:
First section
#Sybase Software Asset Managemnt License file. XX License for ASE Enterprise
#Edition Linux x86 64 64bit
Package ASE_XX SYBASE COMPONENTS=ASE_CORE...
<vnumber>
Second section
#License for machineid server...
<vnumber>
Hope this is what you were looking for.
Regards,
Ryan

HT1338 Hello! I updated my software some days ago and i dobt like it. I have iphone 4. How can i get or install the previous version of ios (6.1 or 6.1.3) ? Thank you in advance!

Help me please how to get and install previous version of of ios (6.1 or 6.1.3) thank yoy

You cannot. Apple does not support downgrading of iOS, there is no supported method to do this.

HELP! How do I un-install and then RE-install Camera Raw 5.7 on my Mac?

My CS4 would no longer open my RAW files (Canon 5D Mark II) and I was told (on this forum) that I needed to update my camera raw to 5.7. So I downloaded 5.7 but could not figure out HOW to get it installed in the proper place. After trying but not succeeding, my CS4 now tells me there is NO camera raw installed, not even the old one I was running! So I tried to RE-install 5.7 but I get the message that it's already installed. So it's SOMEWHERE on my computer, but I don't know where. It's not in photoshop or where is should be, but I can't try to install it again because my computer tells me it's already installed. How do I remove it from my computer so that I can try again? OR MAYBE BETTER YET, HOW DO I FIND IT AND GET IT INTO THE PROPER PLACE?

Thanks for your reply.
I'm using version 10.9.4
I found the previous 5.7 plug in, trashed it, and started over again.Then I, once again, downloaded Camera Raw version 5.7, and then did the following:
I double clicked on the downloaded Camera_Raw_5.7 dmg and then double clicked on the cameraprofiles.mpkg
Then I installed the camera raw.plugin by going to (Macintosh hard drive) /Library/Application Support/Adobe/Plug-Ins/CS4/File Formats, which was empty (somehow my previous version of Camera Raw was already gone).
Then dragged the new camera raw plugin from the dmg to the same folder.
I restarted my computer and there STILL is no Camera RAW in my Photoshop!! Good grief! Any more suggestions? Maybe you and I need to screen-share....

How to get OID installed?

Similar Messages

Maybe you are looking for