How to get on my ipod when password not working?

how to reset my password on my ipod?

http://support.apple.com/kb/ht1212
You need to restore it from the computer you sync with.

Similar Messages

How do you fix the ipod when its not playing the music right when it makes noise

How do you fix the ipod when its not playing the music right when it makes noise

Hi Nicole,
Try resetting it (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Silver Apple appears (up to 30 seconds). The Home screen should redisplay after the reset is complete.
Cheers,
GB

HT201210 How to reset ipod when passcode not working?

I just bought a 4th gen ipod from someone and I need to do a factory reset. I have tried to reset but it needs a pass code and the girl I bought it from couldn't remember the code to reset. How can I reset it myself without having to call tech support?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software

F2 on Popups? (Or how to get the Component if F2 is not working)

Hello Experts,
I wonder if somebody has a tip how to get the component of popups?
The F2 Help is not working there.
The Popup I'm actually looking at is called by a button. Is it possible to find out the called component by looking at the button Event? (I have tried - but the source does not tell me any component)
Thanks for answers...
Regards
Chris

Chris,
F2 should definitely work if it is a UI component.
You see pop ups on button clicks and F4 value helps. F2 should work in these cases.
For some attributes with F4 help, a DDIC search help is attached. Here F2 does not work.
Anyhow to find out which component it is calling, you use this method
check in the event handler(for button pop ups) or in the outbound plugs specifies in GET_V method(for F4 pop ups) if there is a code like
CALL METHOD comp_controller->window_manager->create_popup etc.,
A Component Usage will be passed to the method. You can check for the component usage in the Run Time Repository.
You will get the component details.
Regards,
Masood Imrani S.

How to get into my ipod when im locked out?

i set a new password and i dont know what went wrong but my ipod says its wrong so i cant get in... how do i fix that?

You need to connect the device to iTunes in recovery mode and restore the device.
iOS: Unable to update or restore
B-rock

How to get rid of timestamp when taking notes in preview?

Hi,
I frequently annotate (using the 'take note' function) when reading pdfs and I would like to get the date and timestamp off of the notes when I am taking them. Is there any setting where I can "disable" the date and timestamp from appearing? So that way, the notes will only have my notes on there and not the date and time at which I took down those notes?
Thank you!
Bryan

you can prevent your name from appearing but not the date (Preview > Preferences > General)
to remove; select the date, time and delete (trebleclick and press delete)

How can i fix my itunes when its not working

my itune isnt opening...i tried everything, nothing worked.........PPPPLLLLLLZZZZ HELP ME

Just try to reinstall it. Do you get any error when starting it?

How to get around audio clips' audio changes not working

Here is how I got around the annoying (and recurring) problem of audio clips not being adjustable. First, it's a good idea to add your music track as the very last thing you do. Often, when I am editing a video together, as soon as I drop in a full length music track, I'm no longer able to make changes to my audio clips. So now I drop in the music track as the very last thing I do to my project. If I want to test a music track in the file, then I drop it in, press Command G to preview my project, and when I'm done previewing the project with the music track, I immediately press Command Z to undo the addition of the music track. If, for whatever reason, I'm still having problems with audio clips no longer updating changes I make to them, I have discovered a trick that works: make the changes to the clip's audio, then copy the clip, then delete it, then paste it. The pasted version should now have the updated audio adjustments. Worked for me, anyway.

Hi,
Have you tried the very first link ? Please try it now if still no luck please use Scan now from the following link:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=5318926
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How do i get into my ipod when it says disabled connect to itunes

how di get into my ipod when it says disabled connect to itunes

You can get into it after restoring it.
See: http://support.apple.com/kb/HT1212

HT1212 how do i get into my ipod when it says ipod diasabled try again in 23,000,000 minutes

how do i get into my ipod when it says disabled try again in 23,000,000 minutes

Read the article that you linked

HT201210 How do you unlock an iPod when you've forgotten the password?

How do you unlock an iPod when you've forgotten the password?

Do as the manual says to do and restore the iphone.
If you are unable to restore, then type "unable to restore" into the search bar at the top of this page by Support and read the resulting help article

My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

If after you charge it for about three hours and it only last about five minutes the battery is probably dead or there could be another hardware problem. I would go back to the Apple store and ask them specifically how can it be OK if the fully charged battery only lasts five minutes.

HT1689 how do you unlock your ipod when its disabled?

how do you unlock your ipod when its disabled?

This is the same thing:
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone and use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
You can also wipe the iOS device by installing the FindMyiPhone app on another iOS device and using that app to wipe the device.
Just what do you not understand?

HT1414 How do I reset an iPod when an "ipod is disabled" message is displayed?

How do I reset an iPod when an "ipod is disabled" message is displayed?

Restore, if iTunes will let you. Everything except the password will be restored. Connect via cable to the computer that you use for sync. Be forewarned that it takes a long time. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

How to get the Useru2019s position when the user doesnu2019t have CP relation

We have a custom program which will add / delete attributes (In transaction PPOSA_BBP). It is working fine for users which were assigned with CP relation But it fails for users which doesnu2019t have CP relation (since we are getting the position of users form HRP1001 then we are retrieving the existing attributes based on the position after that updating the attributes) as we are getting the position from HRP1001 it fails for users were no CP relation.
Help us how to get the Useru2019s position when the user doesnu2019t have CP relation. Suggest us any function module or how to query the HRP1001 or some other table if exists
Regards
Paul

Hi Paul,
Have a look at these tables.
Using table BUT000 the central business partner data are stored, f.e. partner type, partner names, partner number, partner guid, person number, etc. In table BUTBKK the bank data to a business partner are stored.
Central business partner address data
The table ADRC is used for the address of a business partner. Table BUT020 links the business partner number with the address number. Using table BUT021 several addresses to a business partner with different usages (modes), f.e. correspondence or delivery address, can be stored. The personal data of a business partner person are stored with key person number in table ADRP. The person number is assignd to a business partner person in table BUT000. Communication data of business partners as e-mail, telephone, fax, etc. are stored in the tables ADDR1 u2013 ADDR12. The business address of a contact person or an employee consists of the organization address (company resp. org.-unit) and of an address addition, which describes f.e. a building, a room number, etc. The address addition is stored in table ADCP and is identified by the keys address number of the organization address and person number.
Relationships between business partners
Table BUT050 contains the relationships between a business partner organization and a business partner person using relation types. The relation types are defined in table TBZ9, f.e. the relation type u2018has employeeu2019 corresponds to identifier u2018BUR010u2019, the relation type u2018has contact personu2019 corresponds to identifier u2018BUR001u2019. Table BUT051 stores communication data of a contact person relationship (compare to table ADCP). Table BUT052 stores several address numbers to one business partner relationship (including a standard flag).
Hope this helps,
Kind Regards,
Matthew

How to get on my ipod when password not working?

Similar Messages

Maybe you are looking for