How to get on your ipad when it is disabled
how to get on your ipad when it is disabled
FORCE IPAD INTO RECOVERY MODE
1. Hold Sleep/Wake button down and slide to turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...
Similar Messages
-
How to get into your ipad if you forgot your password
How to get into your ipad mini if you forgot your password
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software. -
How do i unlock my ipad when it's disabled and says connect to itunes
how do i unlock my ipad when it's diasabled and says connect to itunes?
Please see: http://support.apple.com/kb/HT1212 for full details.
Regards,
Steve -
Does anyone know how enable notifications on the ipad when it is disabled?
Does anyone know how to enable notifications on the ipad when it is disabled from typing in the passcode to many times?
i have this question
-
How do you get into your ipad when forgotten the passcode?
I have forgotten my main passcode help?
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
How to get to your files when your Time Capsule dies :(
I am posting this here to help someone who cannot access a Time Machine backup because
the backup was "corrupted"
the <insert whatever obscure message that contains the word "sparsebundle" here> message appears
the Time Machine won't open up your backups
the Time Capsule dies
First of all, I absolutly am a fan of Time Machine and Time Capsule. And they work great ... until they don't - and that is when panic sets in. I haven't had a Time Capsule die on me (because I remembered to enter a "Remember to get a new Time Capsule" event for 18 months after I bought my first one) and I am meticulous about keeping backups. I am a software engineer and, well, before we had github.com ... we had to protect our hard drives.
If your Time Capsule has died - or you can get into the Time Capsule through the Time Machine interface - you can still access you files. You don't need to go out and buy some fancy software to get back your lost stuff. You can't attach a usb cable to mount your Time Capsule (atleast on my 2T ones) - but you can open it to get to the hard drive
Most likely - the hard drive in your Time Capsule is still good (the thing that dies seems to be the power source). The key is to
open your Time Capsule peel back the rubber bottom and you will see some worx or hex screws
take out the hard drive (mine was a Western DigitalCaviar Green -> thanks Apple for being green!)
mount your drive to your Mac (you will prob have to get a SATA to USB adaptor (I use a Voyager Q)
from the Finder (yeah, the FINDER!) navigate into "data>ShareRoot" (this is where mine was, you might have to poke around)
double click the "sparsebundle" for your backups
In there, like little ducks, are directories for every backup - like a normal directory structure. This completely blew my mind when I found this out. It wasn't some mysterious thing like I was making it out to be. Everything was there, in increments, as I had before.
If you are not careful - you might damage your Time Capsule ... but chances are it is already dead. I keep my 2T WD in a safe place with a safe case for posterity. However that hard drive is just like any other hard drive ... it is just not in a Time Capsule.
This is a last ditch effort to get back your files. I resorted to this when I couldn't access my Time Machine backups through the GUI.
I hope that this helps someone and now, for something not so completely different: http://timecapsuledead.orgI just wanted to point out ... that when you "double click on the sparse bundle" - you are actually opeing up the "DiskImageMounter" and another "hard drive" will appear on you Desktop or in your FInder.
It is this "second" Time Machine that you will find your files in date tagged directory! -
How to get books onto iPad when iBooks for Mac refuses to sync.
I have around 300 books which were originally in the books section of iTunes. Since upgrading to Mavericks the new iBooks for Mac is moved them all over and I ma now unable to access most of them on my iPad despite making sure all settings are correct. None of the books I use for study created by iBooks Author will now transfer. The only ones that seem to are those recently purchased from iTunes. Anybody out there found a solution yet. Apparently Apple admit that only books purchased from iTunes will sync, but I need to be able to get them on my iPad. I don't care if they sync or not.
There are a few categorical places one must visit in order to synchronize iBooks for Mac with IOS iBooks. There is no need to remove the iBook for Mac application.
System Preferences > iCloud > Documents and Data is enabled
IOS Settings > iBooks > Sync Collections (enabled) and optionally Sync Bookmarks (enabled)Assumption that iCloud is enabled on the IOS device with documents and data enabled
iBook for Mac > Preferences > General: Sync: Sync bookmarks, highlights, and collections across devices
iTunes
Pick your IOS Device under DEVICES in the left nav
Choose Books along the top toolbar
In the Books panel, choose one of the following
Books and PDF Files
Books only
PDF only
In the Sync Books panel
All Books
Selected BooksClick the box next to the books you wish to Sync
Select iTunes Sync
The books (and PDF) you selected above are now on your IOS device -
How do you reset your ipad when you have forgotten your passcode
I have forgotten my passcode to my ipad 4th generation ... I need help?
Here's a link to what to do when you forgot your passcode.
http://support.apple.com/kb/HT1212 -
How can I fix my ipad when it is disabled?
I am getting the message from ITunes that it cannot connect with my IPad2 because the IPad access is block with a passcode, the IPad is disabled so I cannot enter my passcode. What can I do to sort this out?
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. -
How do you enable your iPhone when it is disabled
I just got the iphone 5s and was setting up my phone i did the passcode option and wasnt paying attention press the code in and locked myself out of it. I thought I knew it tried it several more times and locked myself out, I think for good. I dont even have the option on putting in the passcode anymore and it tells me to connect it to itunes but i cannot, because it says put in the passcode in order to access itunes.
http://support.apple.com/kb/HT1212
-
How do i get into my ipod when it says disabled connect to itunes
how di get into my ipod when it says disabled connect to itunes
You can get into it after restoring it.
See: http://support.apple.com/kb/HT1212 -
HT1349 How can i get into my iPad when i forgot my password?
How can i get into my ipad when i forgot my password?
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. -
How can you screen your iPad on a Keynote presentation just like Apple?
Like when they had last years WWDC when they demoed iOS 5 on the iPod Touch 4G
Can you do that with an iPad 2?AL113-
Mirroring refers to normal operation of the iPad, where you can see the Home screen on your external display, as well as when setting up a slide show, et cetera. You may not need to mirror the iPad's display for presentations (but the iPad 2 does mirror). At least for slide shows and videos, the iPad 2's screen does not show the presentation when an AV cable is connected, it only appears on the external screen.
The alternative I mentioned about using the Apple TV box with AirPlay is probably easier to do, except you need the Apple TV box to interface to your external display. One problem with an AV adapter, is that the weight of its cable tends to pull the connector out of the iPad as you are holding it.
Fred -
Is it bad to charge your iPad when there is like 30% left ?
Is it bad to charge your iPad when there is like 30% left ?
Question: What is a "charge cycle"?
Answer: Lithium-ion batteries can be charged a finite number of times, as defined by charge cycle. A charge cycle means using all of the battery's power, but that doesn't necessarily mean a single charge. For instance, you could use to your iPad for a few hours one day, using half its power, and then recharge it fully. If you did the same thing the next day, it would count as one charge cycle, not two, so you may take several days to complete a cycle. Each time you complete a charge cycle, it diminishes battery capacity slightly, but you can put your iPad's battery through many charge cycles before it will only hold 80 percent of its original battery capacity.
Don't worry about it, since the battery will take 1000s of charge cycles.
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
How do I unlock my ipad when it says it's disabled connect to itunes?
How do I unlock my iPad when it says it's disabled connect to iTunes?
You have to wipe your iPad, and restore as new. Everything you had on there is now gone, unless you had it elsewhere.
Maybe you are looking for
-
How to run multiple scripts in sql*plus?
I would like to run 2 scripts in sql*plus, how do I do this? I tried the following, but it won't run. create table student_new AS select * from student insert into student_new (last_name, first_name values (Crop, Jenny) The above are the two scripts
-
Good news: A work-around to make VLC work with the nVidia sound drivers
No reason to stay with the Realtek drivers now! Here it is; In VLC Quote Go to preferences ----> Advanced -----> Audio ------>Audio Output Module (Choose Win32 waveOut extension output) Save Restart.
-
Hi experts, In my current client we have a requirement for employee reporting structure. The requirement is one person reporting to maltipal supervisors. is it posible in standard SAP. or if i go for development how it will work how it has to be deve
-
Dear All, I don't know if I'm in the right place, but I use the Field Service application, and I need to extract some attachments using a customized BS. Is it possible? If yes, how can I achieve this requirement? Thanks in advance. Rose Edited by: us
-
4.6c - ecc 6.0 abap+java
Hithere if my source system is 46c-> upgraded to ECC 6 Non Unicode-> Unicode export done-> now i have a ABAP export .... , now i install a target system with Ecc 6.0 Unicode and import the ABAP export....but how can i have the Java component in the