How to get open NAT

Hello, I have been having trouble with my NAT setting for my PC, I need it to be open. I have googled and tried things all night and still no luck. I have forwarded ports, enabled UPnP. any ideas? Thanks

ok, by reading those, it looks like I need my ISP to put my modem into bridge mode. thanks.

Similar Messages

How to get Open Balance for the year and Total Ending Balance?

For a given account, how to get Open Balance for the year (Cumulative Ending Balance) and Total Ending Balance (Cumulative Ending Balance)?
Is there any function module available? or should I read from some tables? Please advice.

Hello Paul,
You could try calling one of the following BAPIs - see which one meets your requirement. They are documented well so shouldn't be a problem finding out the correct one for your requirements.
BAPI_GL_GETGLACCBALANCE
BAPI_GL_GETGLACCCURRENTBALANCE
BAPI_GL_ACC_GETBALANCE
BAPI_GL_ACC_GETCURRENTBALANCE
BAPI_GL_ACC_GETPERIODBALANCES
BAPI_COND_VAL_DECRE_BALANCES
You might have to put in some of your own logic after the BAPI call to get what you want.
Hope this helps,
Cheers,
Sougata.
p.s. Also look at FM FAGL_GET_ACCOUNT_BALANCE
Edited by: Sougata Chatterjee on May 7, 2008 11:47 AM

How to get opening balance of a g/l account using query ?

Dear all,
I'm developing consolidated g/l accounts debit,credit totals month wise with opening & closing balances thru query based report,
i'have got expected results except opening balance g/l account,
How to get opening balance of a g/l account based on date as conditonal parameter ?
Any one throw light on this ?
Jeyakanthan

Hi ,
Please kindly help me on this.I don't know how to calculate opening bal and closing bal over a period of time by Quarter, and how to generate the reprot using crystal reports and please suggest me on this how to go ahead with this report.
Here you can go through the reprot requirement , and also an attachment of my Report template.
we have "Category of Investment" , "Income On Investment" ,"Gross yield" and "Net yield" are report fields.
1)"Category Of Investment " is Hardcoded.
2)In this we have to get "Investment" column from VTBFHAPO(BZBETR Field) table Database based on
Flow type(SFHAZBA) in VTBFHAPO table ='0100' for bonds category.
3)"Income on Investment" also we will get from DB using the following formula.
Income On Investment= "Interest IncomeAmortizationCapitalgain"
4)With the Date field(Making Date dimension based on date(DCRDAT) field in VTBFAHPO table.
By Current Quarter,Year to Date,Last year)
5)Opening bal---Investment
Purchase--Flowtype=0100
Meturity/Sales--Flowtype=0200
Closing balance=Opening bal+(Investment or Purchase)-(Meturity or Sales)
'0100' '0200'
Here '0100' and '0200' are Flow types based on this i need to get value from the same Field.
we need to Calculate "Gross yield" .
The bellow are formulas to evaluate "Gross yield "
Ist Qtr .Gross yield=Investment income/(((April opening balanceApril closing balance)/2)((May opening balanceMay Closing Balance)/2)((June opening balance+June closing balance)/2))/3)
Ist qtr. Year to date Gross yield=Investment income/(((April opening balanceApril closing balance)/2)((May opening balanceMay Closing Balance)/2)((June opening balance+June closing balance)/2))/3)
Investment income=interest incomeamortisationcapital gain
Iind Qtr.Gross yield=Investment income/(((July opening balanceJuly closing balance)/2)((Aug opening balanceAug Closing Balance)/2)((Sept. opening balance+Sept. closing balance)/2))/3)
Iind Qtr. Year todateGross yield=Investment income/(((April opening balanceApril closing balance)/2)((May opening balanceMay Closing Balance)/2)((June opening balanceJune closing balance)/2))((July opening balanceJuly closing balance)/2)((Aug opening balanceAug Closing Balance)/2)((Sept. opening balance+Sept. closing balance)/2))/6
This data should display over a period of time. based on "Current Quarter","YearToDate" and "Last year"
The quarter starts from April,i,e FY, I Like this i need to generate the report.
Thanks in advance.

How to get open production orders by plant wise

Hi,
How to get open production orders by plant wise.
i know from tcode COOIS, is it possible to get from this. if so what are the parameters we have to give to get open production orders by plant wise.
is there any tcode or tables available , please provide details .
regards,
Hari priya

Hi,
What is your definition of Open Production Orders?
Definetly you will get the report from COOIS for Plant wise.
Whther you want to consider all the Orders having the Status REL but not DLV?
Then there is a chance of having the Orders, still with PDLV status but GR is done for the full Qty. May be you don't want to consider the TECO status, eventhough the Order is short closed??
Better to ommit the Orders with CRTD status also..
So, based on this which status to consider and which status not to consider..
You can define the "Selection profile status" in BS42.
Use this selection profile in COOIS, so that the rsults will be accurate..
Best Regards,
Siva

HT2474 when I am opening any application including safari, these icons are not showing in dock, how to get open applications in my dock?

when I am opening any application including safari, these icons are not showing in dock, how to get open applications in my dock?

This could be a plist corruption problem, but I'm not sure.
Sometimes, the preference list files get corrupted. You can usually just remove them and they'll get re-created. This may require you to reset certain settings. A notable exception to this is the Mail plist which actually stores the Library structure of your email accounts. Deleting the Mail plist will definitely cause lots of problems, but is recoverable.
The plist files are stored in the /Users/username/Library/Preferences/ folder. They usually have the naming convention of com.company.programname.plist.
A simple troubleshooting technique is to move a suspect plist file out of the Preferences folder and start up the app, again. It will re-create the plist from scratch.
In your case, I would try the com.apple.dock.plist. You can use Activity Monitor to kill the Dock app and it will restart. Or, you can log out and log back in.
There is a new file with Leopard called com.apple.dock.db. I haven't figured out what it does, but you might try moving it out. If anything gets worse, you can move the old file back in replacing the newly created one.
This all sound somewhat odd, so I don't know if this will help.

WRT54GSV4 , how can i "open" nat-type

hey guys,
maybe for u just a simple question,
but how could i open "nat" to play / host
multiplayer games, on Modern Warfare 2 ?
thank you
Message Edited by Kokainu on 01-01-2010 02:28 PM

Are you playing Game on the X-Box or on the computer...?
Who is your Internet Service Provider...?
If the ISP is DSL then,you have to convert the Modem into the Bridge mode.

2 PS3's connection problems/ How do I get open Nat on 2 PS3s.

I am having problems with the connection on my ps3's. Me and my brother both have seperate ps3's. We play call of duty mw3 together. When we are both online and playing we have problems. We both are in the same party and we try to join games but we can never join any. When we are both online, One of the ps3's has an Open NAT and the other ps3 has a moderate NAT or a strict NAT. When only one of us is playing everything is fine.
I want to know how can I make both of them have Open NATs and how can I fix this problem I have. I have an extra router as well. Any help would be great. Thanks!

Do This first,
How to setup the MI424WR Verizon FiOS Router for multiplayer gaming with the Wii and Xbox gaming con...
And then Do one of the two below.
How to enable BASIC Port Forwarding on the MI424WR Verizon FiOS Router
How to Configure Advanced Port Forwarding on the MI424WR Verizon FiOS Router
Keep in mind that your username should be admin and your password should be the serial number on the service sticker of your router. That is located under the bar code, and it IS case sensitive.

How to get open PS

Hi,
I want to know, what is open PS.
Can it help me to down load SAP PS structure to Microsoft Project (MSP)
How can I get open PS.
Regards
SCSharma

Hi Subhas,
You can get Open PS from SAP service market place .
It is a free from SAP..
After logging to SAP service market place to go Download section and down load the open PS software.
hope this may help..
Regards
shiv

How to get open items as on a key date

Hi experts,
I want to show a report Agewise report of offsets: 0-30, 30-60,....
Only the open items of Vendor as on a particular key date to be considered...
How to get the open items as on a particular key date ?
Regards,
Rao.

Hi All,
Thanks for the reply..
==============================================================
Basically create one ckf and two rkfs for each aging bucket
ie ckf 0-30 days = rkf 0-30 days open + rkf 0-30 days subsequently cleared
Because you need to restate the AP report to a key date - some items have changed their status since that key date but were open at the key date (ie we call those subsequently cleared)
so rkf 0-30 days open is
posting date <= key date
item status = O
net due date between variable date (cmod which reads key date) offset 0 and variable date (cmod which reads key date) offset -30
rkf 0-30 days subsequently cleared is
posting date <= key date
cleared date > variable date (which reads cmod of key date)
net due date between variable date (cmod which reads key date) offset 0 and variable date (cmod which reads key date) offset -30
========================================================================
In the above two cases, while creating restricted key figures how to design this;
net due date between variable date (cmod which reads key date) offset 0 and variable date (cmod which reads key date) offset -30
And also after creation of two rkfs i created a ckf i.e ckf = rkf1+rkf2.
Now i dragged this ckf into columns and when i checked the query it is giving error that key date variable is used more than once. ( Bcz we have used key date variable both in rkf1 and rkf2 for getting posting date <= to key date )
What is the solution for this ?
Regards,
Rao.

Should I get a new router to get open NAT type?

Whenever I play COD Black ops 2 on my xbox 360 my NAT type is strict. I have a centurylink 660 series modem and that is working to its full potential of the bundle we bought from them. I also have an airport extreme (2009). I Know theres all these port forwarding stuff, but whenever I try to do that, my whole network crashes and I have to factory default all of my stuff. So would getting a new router help me? also, I have my airport extreme in bridge mode because It said I have a double NAT and DCHP. So what would be the best solution for getting an open NAT type for Call of Duty on Xbox 360? I also have a MacBook pro (2009).

Yes, that is what I am doing. I don't know the setup details for what you want to do, but I am running a MacBook Pro (late 2008), iPad, and a couple of iPhones on wifi through my Airport Extreme base station. I also run backups to a Time Capsule.
The base station is set up to "Create a wireless network" and runs in "DHCP and NAT" mode. The Time Capsule and two Airport Expresses are set up to "Join a wireless network". My cable modem (Ubee DVW3201b) runs in bridge mode, connected by cable to the WAN port on the base station. I have the wifi capability of the modem disabled. It took me some trial and error to get the cable modem set up properly, but there is a lot of information out on the net.

Trying to get Open NAT Type on 2 Xbox 360's at the same time

After buying 3 new routers in a row trying to find a compatible router at my last house with Comcast, I finally found one that works then move to a house with Fios. I LOVE the speed... but this modem/router took our nat issue back to square one... obviously we're trying to play CoD: MW3 together, but we're both getting moderate NAT. I read a couple posts on the forums here and nobody could offer up a solution (looks like it has something to do with a NAT table that's too small or something?)
Anyway, I came up with a potential solution but it's something I've never done before, maybe someone else knows how:
I'm trying to connect my old dlink router to the actiontec router's internet connection, then have the xbox's connected to the dlink router with dhcp enabled. my theory is to make the actiontec router accept whatever traffic is coming through the dlink router, without knowing what devices are connected to the dlink router.
in this way the dlink router could potentially control the NAT between the xbox's via UPnP by itself, and the actiontec router would have the xbox live ports forwarded to the dlink router's ip address.
Am I crazy, could this work? so far I have the dlink router on a seperate subnet (192.168.0.1) while the actiontec is 192.168.1.1. the dlink router can ping machines on the actiontec router's network but not vice versa. also the dlink router cannot access the internet through the actiontec router yet. which is why i'm here. if this could work, can anyone explain how to set it up?

TallgeeseIV wrote:
After buying 3 new routers in a row trying to find a compatible router at my last house with Comcast, I finally found one that works then move to a house with Fios. I LOVE the speed... but this modem/router took our nat issue back to square one... obviously we're trying to play CoD: MW3 together, but we're both getting moderate NAT. I read a couple posts on the forums here and nobody could offer up a solution (looks like it has something to do with a NAT table that's too small or something?)
Anyway, I came up with a potential solution but it's something I've never done before, maybe someone else knows how:
I'm trying to connect my old dlink router to the actiontec router's internet connection, then have the xbox's connected to the dlink router with dhcp enabled. my theory is to make the actiontec router accept whatever traffic is coming through the dlink router, without knowing what devices are connected to the dlink router.
in this way the dlink router could potentially control the NAT between the xbox's via UPnP by itself, and the actiontec router would have the xbox live ports forwarded to the dlink router's ip address.
Am I crazy, could this work? so far I have the dlink router on a seperate subnet (192.168.0.1) while the actiontec is 192.168.1.1. the dlink router can ping machines on the actiontec router's network but not vice versa. also the dlink router cannot access the internet through the actiontec router yet. which is why i'm here. if this could work, can anyone explain how to set it up?
to get both working, you must enable uPNP on your router. If you are connecting your xboxes to your Actiontec, same rule applies. There is no way to allow two xbox's to connect with OpenNAT without uPNP.
Your best bet (if you can't move the actiontek behind your D-LINK) is to hook the two xbox's up to the Actiontec (preferable wired, but wifi should work).
I have 2 xbox's running fine with uPNP enabled. Both have OpenNAT.

Airport Extreme Model A1034...How do you OPEN NAT!?!....Will give points....Please help

Hi I am wondering if anyone can help me out I currently own a Airport Exterme Base Station Model Number A1034 older version. My problem is with xbox live. I have always been able to connect wirelessly with my xbox 360 with no problems. I know in order to play Xbox live you have to have an OPEN NAT setting. Which im pretty sure I've always had because I would never get any problems. I have no idea what NAT means and I am not tech savy what so ever.
Recently I decided I wanted to create a new network and delete my old one. I did so and everything was fine with the internet but my problem lies with my xbox live now. For some reason it's saying that I now have a Moderate NAT and I will experience difficulties when on xbox live. I am wondering is there a way to OPEN NAT? I tried looking for it in airport ulitlity and I found it but like I said im not tech savy. Under the NAT settings there are two options ENABLE DEFAULT HOST AT & ENABLE NAT PORT MAPPING PROTOCOL. I have no idea what that means I though it would just let you choose between Strict, Moderate, Or Open NAT but unfortunately it doesn't. So can anyone help me I will give points. Thank you in advance!!

Please check out the following Apple Discussions post for assistance. Hopefully, it will address your Open NAT issue.

How to get Open/Save Dialogue box

Hi,
I need to get open/save dialogue box while downloading a file (from JSP).
One way which I am currently using is on click of the button pass control to servlet and in servlet using the following code:
/**.....Some Code */
response.setContentType("application/csv");
response.setHeader("Content-Disposition", "attachment; filename=" + filename);
/**.....Some Code */But I am wondering is there any way I can do the same without passing the control to Servlet? On clicking the button in JSP, is there is any possibilty to get the Open/Save dialogue box directly.
Thanks
Arun

without passing the control to Servlet?Why?
In HTTP you can send the response only once.The application where i have this requirement is an old one. In the application, I have there are some screens, whose control never goes to Servlet.
TO be more precise, 2 pages one HTML and another JSP. And the file to be downloaded is created when JSP is called from HTML page. And there is no interaction with Servlet. The JSP inturn calls a method in Java file (which is not a Servlet) and gets all the details including the file to be downloaded.
I have used window.open() to download the file(in JSP) in order to have Open/Save dialogue box.
But the approach is working fine in Windows XP systems but not in Windows2000. In Win00 machines it is directly opening the file in popup without giving the user any option for Open/Save.
Please let me know your suggestion on this.
Thanks

Unable to get open NAT and UPnP unavailable with PS3

I just got my Jetpack couple days ago and was testing out the performance of it to see if I should drop my cable and keep the Verizon 4g. So far, it has been pretty good. I am seeing download speeds twice as fast, 24mbs, and upload speeds nearly 10x as fast. Latency is alright, as it closely matches cable. This seems to be a great thing with my laptop doing all the typical things. But then I wanted to see how it was with my PS3. After many connection issues, I finally connected, but NAT is type 3 and UPnP is unavailable. With cable, I was open and had UPnP. I have searched about how to fix this, and some say it isn't possible with Verizon while others say add the PS3 to DMZ or open certain protocols for the PS3. I have tried everything people said, that I could do with this modem, and nothing works. Any ideas on how to make this work, or do I just drop Verizon and retain my cable internet?

been having the same problem but to my x-box and i have an x-box wifi adapter hooked up just cant get on becuase for some reason i got a strict network through this hotspot. Also it is a sweet internet service, but i would like to talk to people while playing games.

Cant get open nat type for PS3, it use to be but wont go back

im on Fios with the verizon router. I had the DMZ set to an ip with the PS3 also on it. the nat type was open and all was ok. I dont know how long its been this way (guessing not long because I have sucked at COD this week!) but I noticed im not at moderate. I checked the DMZ and the ip was still there. looked at PS3 and it was empty for some reason, so I put the ip back. ive restarted and tried other IPs andit will not go back to open. ive looked at youtube tutorials to be sure that im not missing anything but the vids seem tobe older because I have more options on the router settings than what the vids show, guess I have newer firmware. Any suggestions?

actually, Open is what you want. you have a lot better preformance online when dealing with fast paced games like COD. you will really notice a difference. generally you just designate an IP in the DMZ settings of the router, then tell the PS3 to only use that IP, and thats it. just seems now on my end thats no longer the case and cant get it to go

How to get open NAT

Similar Messages

Maybe you are looking for