How to get or reinstall complete Software of 2690

I have nokia 2690 and its software is curpt.  I tried to reinstall from nokia Ovi suit but some files are missing and not correction reinstalling...........
files like  Themes, ringtunes, browser, calculater , phone lock, etc.
plz guide me i get complete software or get these files...........
plz help me i am so worried about my device.....

Check this link for certificates issue.
http://discussions.nokia.com/t5/Pool-of-Knowledge/Certificate-not-on-phone-or-SIM-for-S40-phones/td-...
For updates-
Connect your phone to a computer & select Nokia Suite mode. If you do not have Nokia Suite on your pc you can download it from here. Now open the Nokia Suite & click on the “green icon of arrow pointing downwards”.
If any updates are available they will be shown in ‘green’. If not you may reinstall the current version. Reinstall option is shown in ‘blue’. If no option to reinstall is shown, please wait for sometime it will become visible.  Then the Nokia Suite will download the new software version of the phone. After it you will be prompted to take a complete back up of the device content. Please do not skip this step as reinstallation will erase all the personal data from the phone like contacts, messages, calendar entries etc.
Please note that if you have set a memory card password & you have forgotten its code then take a backup of the card data also as the card will be locked after update and can only be unlocked if you enter the correct code or by ways mentioned in this thread.
Also note that while updating the device ensure the following things-
The device is full charged.
The internet connection Is of good speed & has a backup in case of power loss.
The PC should also be connected to back up power source as if the process is interrupted the phone may go dead. More on update failure & its remedies here.
Please do not run any resource intensive programs in the background while updating as it may freeze the PC which in turn will lead to a dead device.
Ignore all the windows pop-up notifications about device being disconnected.
DO NOT DISCONNECT THE PHONE UNTIL UPDATE IS COMPLETED.
It will be better if you disable security keyguard & PIN code request before proceeding with Update/Reinstallation.
Sometimes the device may show Test Mode. Do not panic & DO NOT remove the cable. Let the process complete.
Also check out this video on YouTube with instructions for update.
If problem persists, please visit the nearest authorised Nokia Care Centre.
Please mark the post as solution if it solves your problem.
Current Device - Nokia Lumia 1020/920

Similar Messages

  • How to get the field COMPLETION in extract layout

    Hi,
    Does anyone knows How to get the field COMPLETION in extract layout? i have not been able to find it and it is imperative to have it for implementing a new evaluation.
    Thanks a lot for your help.
    CAMILO URIBE

    Hi Neil,
    The following steps describe what we did to get the new evaluation:
    1. Define Attributes and Object Types for Evaluations: here we added a new field for evaluation. The field was COMPLETION (degree of processing in percent), with relevant object "TASK". "No Summarization" was configurated as Rule for Summarization
    2. Define Extract Layouts: here we created a new extract layout for evaluation. The objects and attributes to be used were defined (the field COMPLETION  was defined as attribute).
    3. Assign Extract Layouts to Project Types.
    4. Define Evaluations: the new layout for evaluation were created using the attributes.
    5. Define Severity.
    6. Define Threshold Values. In the new evaluation the field COMPLETION was used in the formula.
    After configurating and testing, we have noticed that the values of field COMPLETION are not taking into account. It does not matter which value it has, evaluation always take 0.
    Thanks for your help,
    CAMILO URIBE

  • HT1222 how I get the latest airport software update?

    How i get the latest airport software update?

    Marlon brown wrote:
    I been trying to get this update off my phone but can not
    I been trying to figure out what you're talking about but can not

  • How to get XML PUblisher Desktop Software

    Hi
    Everbody, can anybody please help me in getting XML publisher desktop software or just send me the link from where can i download. It will be a great help for me,i think this software can act as an alternative to Microsoftword ,is it correct.
    Regards
    Sourav

    *.us.oracle.com are internal Oracle sites. Those links will not work. Use http://edelivery.oracle.com and search under Windows and Oracle Business Intelligence. Then click on Oracle Business Intelligence Media Pack. Download part number B29943-01.

  • I have put vpn one on my ipad but it did not install so I need to know how to get it off completely and reinstall it

    I Really don't know what to do to get vpn one to work on my ipad it shows up in setting but not where it should and when I go on it it there is nothing there

    Download CS6 products
    Mylenium

  • I am on a MAC and do not know how to get the 4.5 software to laod on my Pearl

    I tried downloading the software and using pocket Mac but this doesn't work How do I do this?

    See if this helps:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212

  • How to get new version of software?

    Hello,
    I got an iPod Shuffle for Christmas, which requires the newer version of iTunes to work. I tried to download a newer version of iTunes, but when I tried to install it I received an error message stating that I needed MAC OS 10.5 or higher to run it. I currently have 10.4.11 on my computer. I downloaded the new 10.6 version, but when I tried to install it I received the same message. Is there somewhere that I can download the 10.5 version or is there a way to get around this error? I should also point out that my disk drive doesn't work, so I would like to avoid any sort of resolution that involves purchasing a disk with the new software. Any suggestions? Thank you for your help!

    OK, I'm looking at this again, and I see that I downloaded: "MacOSXUpdCombo10.6.5.pkg". Maybe that isn't the actual software?
    Correct, only an update for those that have 10.6.0 through 10.6.4 already installed.
    Is it true that I still cannot download an updated version of iTunes without updating to the 10.6 Software?
    You could download it of course, but you cannot use it in/from 10.4.x
    Is there a way to purchase the software and download it online instead of using a CD/DVD?
    No, sorry, you need a physical copy.

  • How to get Beats by Dre software on my Pavillion DV6-6170SD?

    Hello everyone,
    I  recently installed Windows 8 (64 bit) on my HP Pavillion DV6-6170SD and most of the drivers were working right away. I used to have Beats by Dre audio software before I updated my Windows and now I can't find it on the website below.
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5141...
    Can someone help me find the Beats by Dre software for my laptop?
    It looked a bit like this.
    Thanks in advance,
    Ali

    Hi Ali,
    You're welcome
    It may be worth trying to use the Windows 7 IDT Audio installer specifically for your notebook ( I've found this seems to work Ok on several machines ) - download it from the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55094.exe
    When done, open windows Control Panel, open Programs and Features, right click the IDT Audio entry and select Uninstall - let the process complete and then restart the notebook.
    Let Windows fully load, open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, restart the notebook again.
    Any improvement?
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • How to get windows 8 Pro software OS

    I have bought a HP250 G2 notebook, the reseller said it comes with Windows7 Pro + Windows8 Pro, and there is a "Pro Windows8" sticker at the back of the notebook. However when I power on it, it is Windows 7 Pro pre-loaded. So how can I upgrade it to Windows8 Pro? I mean where to get the product key if I download it from Windows Store?

    riverstone wrote:
    I have bought a HP250 G2 notebook, the reseller said it comes with Windows7 Pro + Windows8 Pro, and there is a "Pro Windows8" sticker at the back of the notebook. However when I power on it, it is Windows 7 Pro pre-loaded. So how can I upgrade it to Windows8 Pro? I mean where to get the product key if I download it from Windows Store?
    You buy it through MS not through HP...that is called a upgrade...but IMHO that is a downgrade...Your W8 will not improve or make any significant gain going to it if you screen isn't a touch screen.
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • How to get the FA completion date?

    Hello,
    What is the correct way (from screen or backend) to find the date/time on which field activity was completed? I want the completion date, not the scheduled date (ci_fa.sched_dttm).
    Thanks in advance.

    If you look at the FA Upload Staging table (CI_FA_STAGE_UP), there is a WORK_DTTM field, which is the date the work was completed, if that is the date that you want.
    If the date that you want is however the date that the status was changed to "Completed" in the system, then this is not shown anywhere, unless you have an algorithm to log status changes, like the example FWFM-FA-INT, which is used in the case of integration with another system to send outgoing messages for status change - this algorithm also has an option to add log entries to the Field Activity.

  • How to get rid of a software icon that has been re...

    I removed a java app from my memory card. But for some reasons, the icon remains and refuse to be removed. Anyone can help? This is on an N95
    Nokia >>> N95 (current), E65, N800, N80IE, 770, 5300 XpressMusic, 6030
    Sony Ericsson >>> W810i
    Motorola >>> RIZR Z3, RAZR, V551

    Was it removed using the "Application Manager" tool, which supposedly does a clean remove ?
    Try hooking your phone to a PC with USB as a mass storage device, and try to locate files (including icons) that may have been left on the card (possibly in a directory that was created by the application you removed).
    6230i - N95 - iMac

  • I got a new iPad last month and set up through iCloud. Still have a message on my screen that it is still restoring from iCloud. How do I get it to complete other than having to rest me start again?

    I Got a new iPad last month and sent up in the usually way and syncd to iCloud. However it has ever since shown a comment saying:
    Restoring from from I cloud backup
    i I have no idea how to get it to complete. Or do I need to re-set and start again?
    Help!

    Where do you see this message? I know it can take a few hours to restore from an iCloud backup if you had lots of apps, data, movies, camera roll photos etc on it, but it should not take days and daus to finish.
    Have you restarted or reset your iPad since you got it? Not the reset that you are talking about - I mean the system reset. Try either or both and see if the message goes away.
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support

  • Itunes says that i need 10.5 to get the new iphone software, but i already have 10.5 itunes

    itunes says that i need itunes 10.5 to get the new iphone software, but i already have 10.5 itunes.  i cant seem to figure out how to get the new iphone software cause it keeps telling me to download updates, and then it does and update search and says im all updated.

    I had a similar issue.  I had to uninstall iTunes and then reinstall it.  Assuming PC, you have to go to the control panel and use the uninstall applications tool.  Then install it again.  Worked for me.

  • I can't seem to update my software, every time I do it says that there is a problem and to close everything that is open. Once I close everything it still doesn't work. How do I get it to complete?

    I can't seem to update my software, every time I do it says that there is a problem and to close everything that is open. Once I close everything it still doesn't work. How do I get it to complete?

    Make sure there's enough free space on the startup disk to install software updates...
    Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.
    Freeing Up Hard Disk Space - Mac Guides

  • I had to reinstall the software for my mac 10.4 in doing so I lost all of my itunes purchases. How can I get them back

    I had to reinstall the software for my mac 10.4 in doing so I lost all of my purchased music form itunes, How can I get it back?

    Log into iTunes Store, select Purchased from the Quick Links section in the right-hand sidebar, download.

Maybe you are looking for