How to get other fields on record when selecting record maximum?
Post Author: Andy_crystal
CA Forum: Data Connectivity and SQL
I am using Crystal Reports 11.0 and I am having the following issue:
I have a file that has the following information
IDNO Date Amount
12345 20070301 120.00
12345 20060101 60.00
I'd like to get the amount linked to the recent date of these transactions when I group by IDNO
I know how to get the recent date by grouped IDNO as below
=Maximum(, MASTERFILE.IDNO)
But I'd like to get the value of the amount when the date is recent.
Is there any way to do this??
Any help regarding this would be appreciated.
Post Author: SKodidine
CA Forum: Data Connectivity and SQL
1. Group on IDNO
2. Group on Date - Descending
3. In Group Sort Expert, pick Top N based on Amount where N is 1.
4. Insert the fields you want in the detail section.
5. Select all fields in the detail section and right click and format objects and under the common tab check the box next to Suppress If Duplicated.
6. Now you have the amount of the most recent date for each IDNO.
Similar Messages
-
Although my ipod shows the number of steps, calories, and time, it no longer is saving it to the history. Also when I open the history it takes me to May 2010 instead of the current date. Any ideas on how to get it to start recording the history again?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
How to get a field that using variable in order to create a query
Hi,
I found a difficulty when creating a query. so, I would like to ask you some question.
1. How to get a field that using variable which that field I want to put it in my query?
For example, I would like to take quantity field in inventory audit report. And when I put my cursor in
quantity field, there was only variable, item, etc. How to get this and put it in query?
2. How to combined the invoice quantity with inventory audit report quantity?
3. I have a query like this:
SELECT distinct T0.[DocDate] as 'Tanggal', T0.[DocNum] as 'No.Faktur', T1.[ItemCode] as 'Kode Barang',
T1.[Dscription] as 'Deskripsi', T1.[Quantity] as 'Quantity', ((T1.[LineTotal])/(T1.[Quantity])) as 'Harga
Satuan', T1.[LineTotal] as 'Harga Total', T3.[CalcPrice] as 'HPP Satuan', ((T3.[CalcPrice]) * (T1.
[Quantity])) as 'HPP Total', T4.[ItmsGrpNam] as 'Jenis Barang', T5.[SlpName] as 'Nama Sales', T1.
[WhsCode] as 'Kode Gudang' FROM [dbo].[OINV] T0 INNER JOIN [dbo].[INV1] T1 ON T0.DocEntry =
T1.DocEntry INNER JOIN OITM T2 ON T1.ItemCode = T2.ItemCode INNER JOIN OINM T3 ON T2.ItemCode
= T3.ItemCode INNER JOIN OITB T4 ON T2.ItmsGrpCod = T4.ItmsGrpCod INNER JOIN OSLP T5 ON
T0.SlpCode = T5.SlpCode WHERE T3.[TransType] = '13' and T3.[CreatedBy] = T1.[DocEntry] and T0.
[DocDate] >=[%0] and T0.[DocDate] <=[%1] and T4.[ItmsGrpNam] =[%2] and T1.[WhsCode] =[%3]
Is it possible if I just take one invoice with invoice quantity and only show up at once although I have a
lot item cost for that item? (because I'm using FIFOmethod).
Please help me.. cause I'm stuck with this thing :l.
Thank you very much, and I'm waiting your respon soon.
Regards,
SiscaTry this one:
SELECT distinct T0.DocDate as 'Tanggal', T0.DocNum as 'No.Faktur', T1.ItemCode as 'Kode Barang',
T1.Dscription as 'Deskripsi', T1.Quantity as 'Quantity', ((T1.LineTotal)/(T1.Quantity)) as 'Harga
Satuan', T1.LineTotal as 'Harga Total', T3.CalcPrice as 'HPP Satuan', ((T3.CalcPrice) * (T1.
Quantity)) as 'HPP Total', T4.ItmsGrpNam as 'Jenis Barang', T5.SlpName as 'Nama Sales', T1.
WhsCode as 'Kode Gudang'
FROM dbo.OINV T0 INNER JOIN dbo.INV1 T1 ON T0.DocEntry =T1.DocEntry
INNER JOIN OITM T2 ON T1.ItemCode = T2.ItemCode
INNER JOIN OINM T3 ON T2.ItemCode = T3.ItemCode AND T3.TransType = '13' and T3.CreatedBy = T1.DocEntry AND T3.Warehouse = T1.WhsCode
INNER JOIN OITB T4 ON T2.ItmsGrpCod = T4.ItmsGrpCod
INNER JOIN OSLP T5 ON T0.SlpCode = T5.SlpCode
WHERE T0.DocDate >=[%0\] and T0.DocDate <=[%1\] and T4.ItmsGrpNam =[%2\] and T1.WhsCode =[%3\]
Thanks,
Gordon -
How to get two fields with same tech name in LIS Extractors?
Hi Experts,
I need "ERDAT" field from two structures (QMSM & QMFE) in 2LIS_18_IOTASK extractor.
In LBWE first I moved ERDAT from QMSM. When I moved ERDAT from QMFE it gives an error:
"Field with same technical name is already available in the Extract Structure".
I don't want to create Append Structure as we need to write User exit.
Can any one tell me how to get this field added in the extractor from QMSM and QMFE?
Thanks for your help.
Regards,
Sreethis is not possible as the all those fields are put in one structure. per definition you can't put the same field name twice in a structure, table in the data dictionary...
hence, you really need to use an append and fill via user exit
M. -
How to get item field values for old versions?
I need to be able to query old field values from previous versions of items in a SharePoint list. I can't execute code on the server (it needs to work with SharePoint Online/O365 for a start).
So far the ONLY API I've that lets me do this is the lists.asmx GetVersionCollection SOAP call.
This lets me specify a single field name and returns an XML structure with the values for the various versions, along with the modification time and who made the change - but NO reliable way of actually identifying *which* version (i.e. an ID or label). That
is, if I know I need to fetch the Title value from version 512 ("1.0") of item 1 in list "Documents", I don't see how to reliably parse the results to determine which entry is version 512. While they may be returned in order, in many cases
the entries are actually missing when there was no field value present (or perhaps when the field hadn't been created yet). I've tried comparing the Modified date to the Created date of the corresponding FileVersion item (which I can get via CSOM or REST),
and while it works some of the time, it's not reliable. I've also looked at the output from the lists.asmx GetVersion API but I don't see how that's useful either, as the Created property for all versions always seems to be just the date the file was originally
created.
It does seem odd to me that there's not a neat way of doing this - if I need to return information for several fields but just for a single version, I have to make a whole lot of requests that return far more info than I need, and then I need to figure out
how to parse the returned text in the case of, say, multiple-value taxonomy fields etc.
Anyone tried doing anything similar here?
Thanks
Dylantry these links:
https://support.office.microsoft.com/en-us/article/Track-and-view-version-information-for-SharePoint-list-items-2d69d936-fb0b-4c84-830e-11708e6ec317?CorrelationId=f87cf6ea-8cbf-446a-a4a0-e2c3a86b3425&ui=en-US&rs=en-US&ad=US
https://social.technet.microsoft.com/Forums/en-US/e48ff216-7ed1-4b20-9f21-d496b1583eea/how-to-get-item-field-values-for-old-versions?forum=sharepointdevelopment
http://sharepoint.stackexchange.com/questions/20019/get-meta-data-from-a-previous-version-of-a-document-through-webservice-in-moss-2
http://sharepoint.stackexchange.com/questions/121594/getting-information-from-previous-versions-of-a-sp-list-using-csom
Please mark answer as correct if it is correct else vote for it if you find it useful Happy SharePointing -
does anyone know how to get my google page back when I open safari??.... it is gone and I get a full page of 'top sites' instead... it is so frustrating! appreciate the help if anyone knows!
Safari preferences / General tab
-
How to get a Tree Node Value when a Tree is Expanded
My reqiurement is when i Expand a Tree i need the Expanded tree Node Value. For Example Consider Parent as a Root Node of a Tree, and Consider its two Children Child1 and Child2.
When + Parent Expanded
I will Get the Output as --Parent
- Child1
- Child2
so As when i expand the Tree i must Get the String Value Parent.duplicate
How to get a Tree Node Value when a Tree is Expanded -
How to get the field COMPLETION in extract layout
Hi,
Does anyone knows How to get the field COMPLETION in extract layout? i have not been able to find it and it is imperative to have it for implementing a new evaluation.
Thanks a lot for your help.
CAMILO URIBEHi Neil,
The following steps describe what we did to get the new evaluation:
1. Define Attributes and Object Types for Evaluations: here we added a new field for evaluation. The field was COMPLETION (degree of processing in percent), with relevant object "TASK". "No Summarization" was configurated as Rule for Summarization
2. Define Extract Layouts: here we created a new extract layout for evaluation. The objects and attributes to be used were defined (the field COMPLETION was defined as attribute).
3. Assign Extract Layouts to Project Types.
4. Define Evaluations: the new layout for evaluation were created using the attributes.
5. Define Severity.
6. Define Threshold Values. In the new evaluation the field COMPLETION was used in the formula.
After configurating and testing, we have noticed that the values of field COMPLETION are not taking into account. It does not matter which value it has, evaluation always take 0.
Thanks for your help,
CAMILO URIBE -
How to get the field name of an internal table during runtime?
How to get the field name of an internal table during runtime?
Hi Sudhir,
Declare and Use Get Cursor Field in Your Prm to get the field Name of the Intenal Table
Example Code:
<b> DATA: v_field(60). " Insert this code.
GET CURSOR FIELD v_field. " Insert this code.</b>
<b>CHECK v_field = 'ITAB-KUNNR'. " Insert this code. (or)
Write: v_field.</b>
Regards,
Ramganesan K. -
I'm having a lot of issues with firefox and cannot figure out how to get help. It began when I updated to 13. I get all kinds of ad popups, I cannot play one game on FaceBook called Farm Town at all, and I keep getting an AVG popup about cookies that I cannot get rid of. These issues are causing me to use Chrome very often even though I like Fox better. I've searched and searched how to get help and cannot find anything. How does one get personal technical help?? These issues do not happen in Chrome at all. Thanks.
Do a malware check with some malware scanning programs on the Windows computer.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.<br /><br />
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
You can also do a check for a rootkit infection with TDSSKiller.
*http://support.kaspersky.com/viruses/solutions?qid=208280684
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked -
How to get the full image directory when i upload the image to web page???
hai, how to get the full image directory when i upload the image to web page???
here is the example:
<form action="uploadfile.jsp" method="post">
image<input type="file" name="image" />
<input type="submit" value="submit"/>
<%
String s=request.getParameter("image");
%>
<%=s%>
</form>
i upload the image from C:\image\center.gif. i use request.getParameter just can get the image name like "center.gif". Can anybody help me how to get the full path name. Thanks a lot..There is no need to get the path. It is also fairly pointless as the server cannot access the client's local file system.
Carefully read this article how you can upload files the right way: http://balusc.blogspot.com/2007/11/multipartfilter.html -
How to get the Application perform actions when exits?
How to get the Application perform actions when user clicks on the "X" icon in the top right hand corner?
OR
If i placed an Exit Button.... when actions that i need to use to allow my application to perform a certain action when it exits?
Thanksframe.addWindowListener(new WindowAdapter() {
public void windowClosing(WindowEvent e) {
// do your stuff here
});The WindowListener and WindowEvent can be found in java.awt.event package
//David -
please let me know how to get past error msg 11 when trying to restore an ipod touch 4th gen
Is the iPod jailbroken? Googling shows that error 11 appears if it has been jailbroken.
-
Hello,
I don't know how to get protected fields that a class inherits from its superclass through reflexion ... the getDeclaredFields method seems not working ...
here is my test program:
import java.io.File;
import java.lang.reflect.Field;
public class Test {
public static void main(String[] args) {
Field [] fieldList = SubClass.class.getDeclaredFields();
for (Field field: fieldList) {
field.setAccessible(true);
System.out.println (field.getName());
static class SuperClass {
protected File file;
public SuperClass () {
file = new File ("a.txt");
static class SubClass {
private File myfile;
public SubClass () {
myfile = new File ("b.txt");
The output is
myfile
This means, the getDeclaredField method of the SubClass returns only fields declared by this class, not protected fields declared by its superclass.
Anyone has an idea to fix the problem, please help me. Thank you a lot
}That's not a problem, the documentation specifically says that getDeclaredFields() only returns fields from this class. If you want fields from the superclass, why not just getSuperclass().getDeclaredFields()?
-
How to get a check box on the selection screen
Hi all
can any body tell me how to get a check box on the selection screenparameter: pa_check as checkbox.
To define the input field of a parameter as a checkbox, you use the following syntax:
PARAMETERS <p> ...... AS CHECKBOX ......
Parameter <p> is created with type C and length 1. In this case, you may not use the additions TYPE and LIKE. Valid values for <p> are ' ' and 'X'. These values are assigned to the parameter when the user clicks the checkbox on the selection screen.
If you use the TYPE addition to refer to a data type in the ABAP Dictionary of type CHAR and length 1 for which 'X' and ' ' are defined as valid values in the domain, the parameter automatically appears as a checkbox on the selection screen.
REPORT DEMO.
PARAMETERS: A AS CHECKBOX,
B AS CHECKBOX DEFAULT 'X'.
Maybe you are looking for
-
I have an old ipod, formatted on an apple laptop, and want to transfer all my music, most of which is not itunes, to my new apple computer. How can I do this?
-
Hello experts, I got an easy question for you. How can I include new entries on any table that at the beginning does not have entries?. If the table has entries I can select one of them and insert new ones by debugging but I don´t know how to do it w
-
How to disable hostname checking in SSL client?
I have a java client using Sun's JDK 1.6. It makes a SSL connection to a server which provides a certificate that does not match the hostname of the server. The result is: Caused by: javax.net.ssl.SSLHandshakeException: java.security.cert.Certificate
-
Html help file not initialized.
I have generated a help-file for a form and the file is fine. The Content_id is set, and I have generated the form again. I4ve set the help preference to HTML, and the code for the key help is added as follows: BEGIN CGHP$CALL_HTML_HELP(
-
Oracle Reports Download to Excel
Can my users download an Oracle report under 6.0 to MSExcel? Do I need to specify a particular report file format to facilitate this?