How to get out of recovery mode with out losing data

please help! I don't want to lose 1000 pictures!

help me please. really urgent. https://discussions.apple.com/message/22269356#22269356

Similar Messages

How do I boot into recovery mode with wireless keyboard

I am unable to boot into recovery mode using either cmd-R or holding down the alt key. How is it supposed to work?
Message was edited by: Niklas Brunberg (better title)

I understand your concerns - I'm glad both of my machines are dual bootable (just in case) and I have my Snow Leopard install disks..... However, this is what Apple has decided, so we need to find the best way to deal with it. Personally, I've tested the recovery mode several times and, at least on my machine, it was not reliable (i.e. it wouldn't work - I tried it again and it did, but it spent more than an hour downloading the entire 4 GB installer again and then another 30 minutes installing it), and on a third try, I found that it had vanished because I had cloned by drive. When you clone, only your system is cloned, not the extra partition.
So, I've decided to rely on a) my bootable clones and b) a copy of the installer (.dmg) in case my clones fail. I don't feel comfortable relying on something that requires an internet connection and a full download to work. But, that works for me; you may want to take a different approach.

How to get into CRISIS RECOVERY mode to reflash BIOS?

Hi..
I have a ProBook 4710s andmy BIOS is bricked, blank screen with flashing capslock, which means Authentication BIOS (failed).
And I can't find the key combinations to put my notebook into the crisis recovery mode to reflash the BIOS.
Does anybody know the combination??? (I've tried <Win>+ <B>, <Func>+<B>, <Win>+<Esc>, <Func>+<Esc>... and nothing)
HELP!!!! PLEASE!!!

I found the document confirming this, see bios authentication failure on this page
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c01443366#N1231

How to get XLR to show BPs with no transaction data for a given date range

Hi -
I am building an XLR report that does a comparison of net sales data across two periods for a given sales employee's BPs.
The report has the row expansion:
FACT BPA(*) SLP(SlpName = "ASalesPersonNameHere") ARDT(Code = "ARCreditMemo", "Invoice") Group by BPA.CardName
and column expansions:
FIG(SO_TaxDate = @StartDate:@EndDate)
and
FIG(SO_TaxDate = @StartDate2:@EndDate2)
where @StartDate, @EndDate, @StartDate2, @EndDate2 are parameters that define the two ranges of dates.
The column formulas are, from left to right:
=ixDimGet("BPA", "CardName")
=ixGet("SO_DocTotal") <-- filtered by column expansion for first date range
=ixGet("SO_DocTotal") <-- filtered by column expansion for second date range
The report works fine except for one problem, I would like it to include BPs for which no transaction occurred in either date range as well.
Any help is greatly appreciated!
Thanks,
Lang Riley

Really appreciate your feedback! Those are good suggestions. I should have mentioned that I had already tried both those suggestions.
Removing FACT on BPA in this case ends up returning all the BPs and not respecting the SLP(SlpName = "aName") part of the query.
Using **, i.e., * or #NULL, makes no change in the resulting data in this case. I had thought that ** would be the solution, but it didn't change the outcome. I still have BPs for which when their sales employee is used as the filter and they have no transactions for either date range, and yet they still do not appear.
I should further mention that the IXL query, as it now stands, does return BPs for which one of the periods has no data, just not both, and I have verified that applicable BPs with no transaction data for both periods do exist in my data set. It seems that perhaps the IXL query needs to be restructured? Please keep the suggestions coming including how this query might be restructured if necessary.

My ipod touch 4 gen is in recovery mode and i dont know how to get out of it,i tried everything like hold the home and top button at the same time. All it did what g to the apple logo and went back to recovery mode any help?

My ipod touch 4 gen is in recovery mode and i dont know how to get out of it,i tried everything like hold the home and top button at the same time. All it did what g to the apple logo and went back to recovery mode any help?

Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
kevinpowell1 wrote:
how can i get it out of recovery mode?
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
Some users have reported as many as 8 or 9 attempts were necessary before success.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
If the issue persists...
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

How to get out of recovery mode in ipod touch 4thgen?

Hello Apple i am rohith. iam having ipod touch 4th gen. it has ios version 4.1. recently i tried to update it, i have downloaded the update also but while installing an errour has occured and it has gone to recovery mode. can u please give your answer how to get out of recovery mode. it has some imprtant notes belonging to my office

Without knowing what the error message said:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

How to get out of recovery mode iphone 3gs ios4.3.5

please can any help on how to get out of recovery mode iphone 3gs ios4.3.5

Reset, hold both Home and Power buttons until the iPhone restarts.
If still in Recovery Mode, Restore in iTunes. If the iPhone Errors, write down the Error Code so you can look up the cause and solution.

How to get out of recovery mode? (urgent)

how to get out of recovery mode?

You iPod encountered an error and has to be restored.
Maybe a data recovery company can help get the info back..
Also,
- Maybe via How to perform iPad recovery for photos, videos
Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official

How to get out of recovery mode

went to update my iPhone 4. it told me to connect it to iTunes. after I connected to iTunes It then told me it was in recovery mode and I need to restore it. is there anyway I can get it out of recovery mode with out restoring it and deleting everything?

No. Once it is in Recovery Mode the device has already been erased.

How to get out of recovery mode iphone 4

how to get out of recovery mode iphone 4

Plug it into your computer running iTunes and restore it.

HT201263 i need to get my iphone into recovery mode with a broken home button and is disabled, my exgirlfriend has the laptop i synced it with, what should i do??

i need to get my iphone into recovery mode with a broken home button and is disabled, my exgirlfriend has the laptop i synced it with, what should i do??

i have the same probelm did u get it solved if yess how ?

After updated my iPad 3 it get stuck on recovery mode, how can I fix it?

After I updated my iPad 3 it get stuck on recovery mode, anybody can help how to fix it?

Have you tired starting all over again forcing the iPad into recovery mode? Turn off your firewall and antivirus software and see of you can start the process all over again. Quit iTunes and restart the computer before you try again.
Here are the insturctions to manually force the iPad into recovery mode.
iPad: Unable to update or restore - Support - Apple
Post back with any error messages and your results after you try again.

My Ipod is stuck in recovery mode with the plug in to itunes thing on the screen I tryed to restore it but I keep getting a error 28 and I tryed to do the reset thing but it did not work what do I do?

My Ipod is stuck in recovery mode with the plug in to itunes thing on the screen I tryed to restore it but I keep getting a error 28 and I tryed to do the reset thing but it did not work what do I do?

Hi,
You could see if this helps...
DFU Mode / Unable to Update or Restore
http://support.apple.com/kb/HT1808
DFU Mode
Open iTunes and Connect the iPod to your Mac
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time
After 10 Seconds release the Sleep/Wake Button until iTunes tells you it has Detected an iPod in Recovery Mode...
The Phone Screen will remain Black... Now Restore.
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

How to get the fixed result in a DES/CBC mode with fixed input data and fix

How to get the fixed result in a DES/CBC mode with fixed input data and fixed key. Below is my program , I tried to get the checksum of the DESInputData with the DESKeyData, but each time the result is different.
below is my code:
byte[] DESKeyData = {(byte)0x01 ,(byte)0x01 ,(byte)0x01 ,(byte)0x01, (byte)0x01 ,(byte)0x01 ,(byte)0x01 ,(byte)0x01 };
byte[] DESInputData = {(byte)0x31 ,(byte)0x31 ,(byte)0x31 ,(byte)0x31,(byte)0x31 ,(byte)0x31 ,(byte)0x31 ,(byte)0x31 };
SecretKeySpec skey = new SecretKeySpec( DESKeyData, "DES" );
Cipher cipher = Cipher.getInstance("DES/CBC/NoPadding");
cipher.init( Cipher.ENCRYPT_MODE, skey );
byte[] result = cipher.doFinal( DESInputData );

Use class javax.crypto.spec.IvParameterSpec to specify IV for CBC mode cipher:
// Create CBC-mode triple-DES cipher.
Cipher c = Cipher.getInstance("DESede/CBC/PKCS5Padding");
// Specify IV.
IvParameterSpec iv = new IvParameterSpec(new byte[] { (byte)0x01, (byte)0x23, (byte)0x45, (byte)0x67, (byte)0x89, (byte)0xAB, (byte)0xCD, (byte)0xEF });
// Initialize cipher with proper IV.
c.init(Cipher.ENCRYPT_MODE, yourKey, iv);
// Encrypt and decrypt should work ok now.
For more info about cryptography, search the Internet for IntroToCrypto.pdf from mr. Phil Zimmerman. This document is also part of PGP (http://www.pgp.com).
An excellent book is 'Applied Cryptography' from Bruce Schneier (http://www.counterpane.com/applied.html).
Regards,
Ronald Maas

How to get out of full screen mode in Firefox 4?

How to get out of "Full Screen Mode" in firefox 4 ?

Pressing the F11 should do it.

HT201263 i am in recovery mode with my ipad, and a few seconds into the download, i get an error message 3259. I have retried multiple times and get the same error.

I am in recovery mode with my ipad, and a few seconds into the upload, i get an error message 3259. What does this mean?

see these for some suggestions.
http://support.apple.com/kb/ts2799
http://ipod.about.com/od/itunesproblems/qt/Fixing-Itunes-Error-3259.htm
This is mosat likely firewall or security related - soething is blocking you connection.,

How to get out of recovery mode with out losing data

Similar Messages

Maybe you are looking for