How to get Outlook 2013 to display server response messages

I'm testing the AV scanner on my email server. The test is to send the eicar test virus and see if the server catches it. I can see in my server logs that the messages has been rejected "as containing the eicar test virus," but Outlook
2013 is just telling me that the recipient address is bad. Outlook is not displaying the actual bounce message. It is much like the "Friendly Internet Explorer error messages." They aren't always right as they look at the response
code and not the actual message.
Google has failed me on this one.
I have Outlook 2007 and it does actually give me the message:
550 5.7.1 Your email was rejected. It scanned positive for Eicar-Test-Signature.
But 2013 says:
The recipient has been deleted or has no e-mail address.
I think I had to change the setting somewhere in 2007, but I cannot find it. Google keeps finding other messages. Any clue how to fix?
Thanks

Hi,
I notice that you have not configured Load Balance for the CASes, I want to know whether all Outlook Clients in both 2 locations connect to Exchange 2013 server via CAS-1.
If all clients connect to Exchange 2013 server via CAS-1, please check whether the
AutodiscoverServiceInternalUri Parameter set to the CAS-1 URL. Please run following command to check:
Set-ClientAccessServer
-identity <servername> | fl
I suggest configure Load Balance for the CASes.
Thanks
Mavis
Mavis Huang
TechNet Community Support

Similar Messages

How to backup outlook 2013 mail?

Hi All,
I have a question regarding how to backup outlook 2013 emails. I have a lot of emails in my Outlook 2013, it is connect to Exchange server.
I want to backup the emails because I have used a lot of space.
Thanks for your help!

Hi,
this article may help:
http://office.microsoft.com/en-au/outlook-help/export-or-back-up-messages-calendar-tasks-and-contacts-HA102809683.aspx?CTT=1
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

How to get the files in presentation server while uploading?

how to get the files in presentation server while uploading?
give me the function module name

Hi,
PARAMETERS: P_FILE LIKE RLGRAP-FILENAME DEFAULT C_PRES. "Prsnt Srvr
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
CALL FUNCTION 'WS_FILENAME_GET'
    EXPORTING
      DEF_PATH         = P_FILE
      MASK             = ',..'
      MODE             = '0 '
      TITLE            = 'Choose File'
    IMPORTING
      FILENAME         = P_FILE
    EXCEPTIONS
      INV_WINSYS       = 1
      NO_BATCH         = 2
      SELECTION_CANCEL = 3
      SELECTION_ERROR = 4
      OTHERS           = 5.

How do i solve - cannot access web server - error message when creating a project in 4.5 with PHP

How do i solve - cannot access web server - error message when creating a project in 4.5 with PHP

Screenshot of how it looks when i try to show a ms access form inside a iframe:
http://oi58.tinypic.com/2vj4ish.jpg

Help!!! How to get the recovery time of transient response of a power supply with Labview basic package without analysis option?

How to get the recovery time of transient response of a power supply with Labview basic package without analysis option? Does anyone have any idea or some similar function SUBVIs?
Recovery time of transient response is defined as the time from the beginning of the transient to the voltage point on the waveform fallen into 10percent of the overshoot. Well, the waveform is something like a pulse with a soft slope.

I recommend plotting your data on a graph on paper. Take a look at the data, and determine what is unique about the point you are looking for. Look for how you can teach your program to look for this point.
I have written several algorithms that do similar, one in fact being for a power supply, the other being for RPM. Neither algorithm used any advanced analysis tools. They are just a matter of determining, mathematically, when you achieve what you are looking for. Just sit down with your graph (I recommend multiple copies) and draw horizontal and vertical lines that determine when you get to the point you are looking for. You are probably going to have to reverse the array and start from the end, so think in those terms.
If you have trouble, emai
l me a bitmap of the graph, and what you are looking for and I will try to be of further assistance. Don't do that however; until you you have given this a few tries. Your solution should be involve a lot of logic on analog levels.
Good luck

What do you do when you get a 'connection to mail server failed' message?

What do you do when you get a "connection to mail server failed" message?

if it used to work and you did not change anything then it's most likely the internet connection or the mail provider server which are having the problem in which case you wait
if not then they changed their settings and you needs to adjust to their new settings
or your carrier changed their settings so they block the required ports

An email can't send "server response: Message contains spam...

One of my email accounts can’t send an email.. And the message came up
“Server response: Message contains spam or virus or sender is blocked: field32_1e2afb1a2cd02"
It says to select a different out going server..
Have I done something wrong, or is there a setting I need to change?
Thank you

Hi
Could you please confirm if the issue was resolved or needs further assistance?

How to get Outlook 2010+ to connect up externally using Outlook Anywhere (EXCH2013)?

I have a on-premise EXCH2010 / EXCH2013 deployment and I would like to allow our users to be able to access their email using their domain joined and non-domain joined (workgroup) laptop/outlook.
The clients are running Outlook 2010 and/or Outlook 2013.
The current issue is that I cannot connect, my test case is using Outlook 2013 trying to connect externally (using autodiscover). When I go and add a new profile and I select Exchange and enter my server URL (the autodiscover urL) and my user-id and click
"check name" I get nothing, just an error saying lookup failed.
I would expect for a WORKGROUP computer to get prompted for user/pass so they can get authenticated and the profile added.
Here is my OutlookAnywhere settings in my AD.
RunspaceId : cd27e542-1c8b-4569-b62d-cb8a19a745a4
ServerName : exch-server
SSLOffloading : False
ExternalHostname : webmail.mydomain.com
InternalHostname :
ExternalClientAuthenticationMethod : Ntlm
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods : {Ntlm}
XropUrl :
ExternalClientsRequireSsl : True
InternalClientsRequireSsl : False
MetabasePath : IIS://exch-server.xand1.mydomain.com/W3SVC/1/ROOT/Rpc
Path : C:\Windows\System32\RpcProxy
ExtendedProtectionTokenChecking : None
ExtendedProtectionFlags : {}
ExtendedProtectionSPNList : {}
AdminDisplayVersion : Version 14.3 (Build 123.4)
Server : exch-server
AdminDisplayName :
ExchangeVersion : 0.10 (14.0.100.0)
Name : Rpc (Default Web Site)
Identity : exch-server\Rpc (Default Web Site)
Guid : e2325c87-eb52-49cb-ab18-f02a76e07340
ObjectCategory : xand1.mydomain.com/Configuration/Schema/ms-Exch-Rpc-Http-Virtual-Directory
ObjectClass : {top, msExchVirtualDirectory, msExchRpcHttpVirtualDirectory}
OrganizationId :
OriginatingServer : xan-dc02.xand1.mydomain.com
IsValid : True
ObjectState : Changed
RunspaceId : cd27e542-1c8b-4569-b62d-cb8a19a745a4
ServerName : exch-server01
SSLOffloading : True
ExternalHostname : webmail.mydomain.com
InternalHostname : webmail.mydomain.com
ExternalClientAuthenticationMethod : Ntlm
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods : {Ntlm}
XropUrl :
ExternalClientsRequireSsl : True
InternalClientsRequireSsl : True
MetabasePath : IIS://exch-server01.xand1.mydomain.com/W3SVC/1/ROOT/Rpc
Path : C:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\rpc
ExtendedProtectionTokenChecking : None
ExtendedProtectionFlags : {}
ExtendedProtectionSPNList : {}
AdminDisplayVersion : Version 15.0 (Build 847.32)
Server : exch-server01
AdminDisplayName :
ExchangeVersion : 0.20 (15.0.0.0)
Name : Rpc (Default Web Site)
Identity : exch-server01\Rpc (Default Web Site)
Guid : 4f20a6e4-ed74-4d75-8e6b-43fb0687848a
ObjectCategory : xand1.mydomain.com/Configuration/Schema/ms-Exch-Rpc-Http-Virtual-Directory
ObjectClass : {top, msExchVirtualDirectory, msExchRpcHttpVirtualDirectory}
OrganizationId :
OriginatingServer : xan-dc02.xand1.mydomain.com
IsValid : True
ObjectState : Changed
Any idea how to make it work? We use Split DNS and one DNS entry for both internal/external clients (webmail.mydomain.com).

Hi,
Please verify whether you can logon OWA successfully.
If OWA works well, it seems there is no problem when access mailbox directly.
Then I suggest configure Outlook as following blog:
Manual configuration guide for Outlook 2013 in Windows 8 (Exchange 2013)
http://support.sherweb.com/Faqs/show/manual-configuration-guide-for-outlook-2013-in-windows-8-exchange-2013
Disclaimer:
Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make sure
that you completely understand the risk before retrieving any suggestions from the above link.
Thanks
Mavis
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

Outlook 2013 Search on Server 2008 R2 - non-functional

The instant search on our Outlook 2013 is constantly turning up the "We couldn't find what you were looking for" message. It is installed on Server 2008 R2 with Citrix providing desktops to our users. The PST files are being stored with
the rest of the user profile on our domain controller (separate machine). For testing purposes I had tried moving my PST to the C: drive. Have tried rebuilding the index and still not working. One thing I did notice was that if I uninstalled windows search
from server manager and installed the indexing service, search functioned properly (this is not ideal), however, every time I would launch outlook I would get a message that it was installing 64-bit components. How can I get search functioning for our users?

I thought I'd post what worked for me with this problem. Your post is old, but I figure others may benefit from this solution.
I found an old Microsoft Support post about "Search" and Outlook being installed properly on a Terminal Server. I followed the procedure and it worked for me on Windows Server 2012 R2 and Outlook 2013. (http://support.microsoft.com/kb/222303)
The following assumes you've enabled the Windows Search feature via the Server Manager.
Install Office and then you must run Outlook as an administrator first. Once you've done that the search tool will properly run and index everything for others on the terminal server.
If you've already installed Office and users have already been using Outlook then you need to repair your Office installation to get Outlook's search working properly. To fix this simply login as the administrator, run the Office repair tool,
then run Outlook as the administrator before any of your users on that terminal server do.
That's it. Once you do that you'll find that the Outlook search begins to index everything properly. You may want to rebuild the indexes by using the rebuild commanded in the Control Panel under Indexing Options.
This worked for me perfectly on three Windows 2012 R2 terminal servers.

Problems using Outlook 2013 with Exchange Server Small Business Server 2003

Hello,
We have just upgraded our Office suite from Office 2007 Pro to Office 2013 Pro. When I try to configure Outlook 2013 to connect to Exchange Server 6.5 (SMS 2003) I get an error "Outlook 2013 being blocked by current version of Exchange Server".
Outlook 2013 at present is not communicating with Exchange server 6.5
Are there any fixes I have to install on our SMS 2003 server to allow Outlook 2013 to work with SMS 2003 Exchange Server?
Any configuration changes I need to make? Any help is appreciated.
Thx
John G.
John Grace

Hi
Outlook 2013 is not supported with exchange 2003:
http://technet.microsoft.com/en-us/library/ee624351.aspx#section10
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

How to connect SharePoint 2013 and Reporting Server - SQL Server 2008 - in native mode

Hi,
We are running Report Server on a SQL Server 2008 environment in NATIVE mode.
We just installed a SharePoint 2013 environment. The SharePoint roles are installed on a single server and we are using a seperated SQL Server 2012 server.
The goal: Display reports created on the Report Server in SharePoint 2013.
The problem: I cannot get the two environments connected.
I've read a dozen or more blogs but are currently more confused then before.
What are the steps I need to take to connect the two environments?
What options do I have in displaying the reports in SP2013 - do the reports need to be on the Reporting Server or can I add them to a document library... or are there other options?
Thnx!

Hi Sander,
Thanks for posting your issue, Have you activated required SharePoint 2013 features in your site collection? also, Install Report builder Model in SharePoint 2013.
Kindly browse the below mentioned URL to setup reporting Server step by step
Note: In blog, Author has taken SQL SERVER 2012, but you can try the same with SQL SERver 2008
http://blogs.technet.com/b/ldusolier/archive/2014/05/19/use-of-bi-capabilities-in-sharepoint-2013-with-sql-server-2012.aspx
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

How to get LOV column's DISPLAY value in IR report?

Hi,
I would like to get LOV column's DISPLAY value to trigger another javascript function. Could you please provide any hint?
For example, there is one IR report with 2 column, DEPT_NAME & SHOW.
The DEPT_NAME type is LOV .
The SHOW column is one link image, when clicking it , I would like to fire a javascript to get DEPT_NAME 's display value.
I know I can use #DEPT_NAME# to get the return value of LOV. However, how to get current row's DEPT_NAME's display value?
Thanks in advance.
Ray
Edited by: 最爱用中文 on 2013-4-11 下午4:14

Is there any way you can create a table join, instead of using LOV as your display type?
That way you can select the name of the department in your IR query, display it as text, and then easily reference it as #DEPARTMENT_NAME#, for example.

How to Get Outlook Client Version for MAC from Exchange 2010

Hi,
I want to know how many users in my organization are using Outlook for MAC or Email for MAC. What is the best way to extract this information from Exchange 2010 server. I can read the RPC Client Access logs by running logparser:
logparser.exe "SELECT distinct extract_suffix(client-name,0,'=') as User,client-software,client-software-version as Versio
n,client-mode,client-ip,protocol from 'D:\RPC\EXTC03\RCA_2014*.log' WHERE (operation='Connect') GROUP BY User,client-software,Version,client-mode,client-ip,protocol ORDER BY User" -nSkipLines:4 -i:CSV -rtp:-1 > D:\RPC\EXTC03\EXT
C03.TXT
How to extract Outlook for MAC clients from this command?
Hasan

Hi Hasan,
As far as I know, Outlook for Mac (Office 2011) uses Microsoft's EWS (Exchange Web Service). So you probably need to collect and focus on EWS logs, not RCA.
Anyway, Karl is right that you'd better post your question in our Exchange forum, where you can get more experienced responses:
https://social.technet.microsoft.com/Forums/exchange/en-US/home?category=exchangeserver
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

How to get outlook 2007 email on iphone 3g

Please help!! My company uses Outlook 2007 for their corporate email, and I can't figure out how to get it on my iphone. Any ideas??

Your company uses Outlook 2007 as their email client for accessing the company email account.
Does your company provide an Exchange account, an IMAP account, or a POP account?
If an Exchange Account, your company must enable ActiveSync at the Exchange Server in order for your to access the Exchange account via ActiveSync with the iPhone's mail client - which provides for Push access with the email account, and over the air syncing for contact info and calendar events with your online address book and calendar at the Exchange Server.
You can access an Exchange account as an IMAP account with the iPhone's mail client if IMAP account access is enabled for your Exchange account at the incoming mail server.
Regardless, best to contact your company IT department about the required account email account settings for accessing your account with the iPhone's mail client.

How to get rid of automatically created server accounts in iCal and Mail?

I have recently setup an OS X 10.6.2 Server for our small office. I got the domain name wrong in the initial install and fixed this by doing a complete clean reinstall of OS X 10.6 server (then upgrade to 10.6.2).
The problem is that one of the OS X 10.6.2 clients had been setup to talk to the server prior to the rebuild. Now on this client, I cannot work out how to get rid of or change the automatically created server accounts in iCal and Mail - everytime you login, these are recreated using the old domain name (and of course don't work).
In Mail if you remove the server account (from Accounts in Preferences), it just pops back again. I even removed every trace of the old domain name from the apple.com.mail.plist file but when I re-open Mail that darned server account (with the old domain name) just pops up again.
In iCal its slightly different in that you can remove the account and it stays away while you have iCal open. But as soon as you close and re-open it, that server account just pops up again!
I thought it might be something to do with Kerberos and found a Kerberos file on the client which had the old domain name throughout it - I changed all these references to the new domain name, but still the same behaviour in Mail and iCal.
This is doing my head in. Any ideas?
Message was edited by: davidav

I suggest you ask in the snow leopard server forum
http://discussions.apple.com/category.jspa?categoryID=264

How to get Outlook 2013 to display server response messages

Similar Messages

Maybe you are looking for