How to get Partner Tab in MIGO while reversal mvt type

how can we get Partner Tab while doing Migo in detail data. while doing a reversal thru reservation

I did the same but due to some problem in transferring request we were not able to get result again when I transfered request i could get the partner tab
thanks.
can you suggest some thing for another problem
we made 2 P.O in one case we did migo and miro there was no problem i.e while MIGO we got an entry for MIGO FI
stock   dr
GR/IR     cr
but when we made MIGO for second P.O   we are getting FI entry
stock        1000    dr
gr/ir           1000    cr
purchase price var 500   dr
rounding off expense   500   cr .
I am not able to get the reason why we are not getting this purchase price variance and rounding of exp entry
where is mistake in making P.O or mistake started in MIGO.
pls suggest something.

Similar Messages

How to get the last error for while loop?

How to get the last error for while loop? I just want transfer the last error for while loop, but the program use the shift register shift all error every cycle.

What do you mean by "get" and "transfer"?
If the shift register is not what you want, use a plan tunnel instead.
Typically, programmers are interested in the first, not last, error.
Can you show us your code so we have a better idea what you are trying to?
LabVIEW Champion . Do more with less code and in less time .

Not showing Excise invoice tab in Migo while Display

Dear SAPient's,
While displaying material document in MIGO. No Excise Invoice tab is showing altough it is there while creating GRN.
please Do needful.
warm Regards,
Bijay jha

Hi,
As you want to see "Excise "Tab in MIGO while displaying material document in MIGO t.code, 1st check do you have authorization to view Excise document, If yes, You can view the excise details in MIGO t.code.
2ndly check, During goods receipt , did the excise duties are captured in MIGO t.code.If yes , you can view all details if you have authorization.
Also check did that material which is excisable have CIN master data in J1ID t.code.
NOTE: To capture excise duties in t.code:MIGO, you need to do following settings:(check did you have such in your system,,,)
Select check boxes of "EI capture" & "Post EI in MIGO" in MIGO Settings segment in Maintaining Excise Group setting in following path:
SPRO --- >Logistics general - > tax on Goods Movements- >India --- >Basic setting --- >Maintain Excise Groups
Also set entry of 101 Movement Type for capturing Excise Duties in following path:
SPRO --- >Logistics general - > tax on Goods Movements- >India - >Business Transactions->Specify Which Movement Types Involve Excise Invoices
Regards,
Biju K

How to get "tones" tab in drop down menu

how to get "tones" tab in drop down menu

I assume that you are referring to the categories on your iTunes library (?), if you are then go into Edit > Preferences and on the General tab make sure that Tones is ticked
You can also enable the left-hand sidebar on iTunes 11 on a PC via control-S, which then allows you to view the sections of your library (those enabled in Preferences) via that sidebar, and if you have iOS devices they will also show on that sidebar when connected.

How to get Simulator tab in VC ?

VC only shows
Design
Layout &
Source tab
How to get Simulator tab also ...?

Hi purav,
as Michael wrote, the simulator tab is part of an older VC version. I asked a colleague in the past, he told me that this simulator tab was available in Visual Composer 6, but in the latest version, this tab is no longer in use. There was also a debug button in the task panel toolbar, but this button is also no longer available in the latest version.
Best Regards,
Marcel

How to get shipping tab in PO

Hi,
how to get shipping tab in PO? Whether it is based on Import Vendor?
If it is yes then how we do find import vendor in the system?
Regards,

Hi
First I think there is no relation between Import vendor and shipping data, STO is internal activity and its link with SD Module
IF you do Sd and MM intragtion properly,shipping data will come on shipping tab
check following points
IN supplying plant
1) material mainatin to same sales organization.distrubition channel and division
2) To set up sto proocess for plant toplant in a company codecomopany process you need to do following config,
1. Go to SPRO --- MM --- Purchasing -
Purchase order -
Set up Stock Transport order
2. Firest step is to define shipping data for plants, here you have set rthe data for both the plants who are doing transaction.
For eg. XYZ1 as supplying plant & ABC1 as receiving plant are the two plants from company code XYZ
Set data for plant XYZ1 as give the value of sales organization for eg for XYZ company sales organization XYZS will be responsible & other data as distribution channel & division.
3Create customer master with sales organizatio XYZS and assigen to plant ABC1
3. Second step is to assign delivery type to supplying plant & document type that should be NL and as per our example it is to supplying plant XYZ1 & doc type UB
4. Next step is optional whether you want to use one step procedure or two step procedure.
5. You need to set up master data alaso such as XYZ1 .
6. You need to set up receiving plant ABC1 as customer in company code XYZ.
With this minimum requirement you can set up Intercompany process with delivery.
Process will be as follow,
1.Create Purchase order with supplying plant as vendor XYZ1 & plant as ABC1 from receiving plant.
2.Process Outbound deleivery with VL10B
3. Post Goods Issue from supplying plant.
4. Post Good receipt in receiving plant.
Regards
Kailas Ugale

Under music my artists tab disappeared but still have albums, songs etc how to get artists tab back?

Under music the artists tab disappeared but still have albums, songs etc.
how to get artists tab back?

Hi Gary gar,
Welcome to the Apple Support Communities!
It sounds like the options at the bottom of the Music application may have been edited. You can click the More section on the far right, then choose Edit in the top right. You can then drag any options you want to that bottom bar and rearrange them.
Browse and play - iPhone
http://help.apple.com/iphone/7/#/iph3cf21a82
Tired of tapping More? To rearrange the buttons, tap More, then tap Edit and drag a button onto the one you want to replace.
Have a great day,
Joe

How to get classification for a given material and material type in MM

Hello Friends,
One of my developer colleagues is struggling to find out : how to get classification for a given material and material type in MM?
He is looking for probable table and table fields to Select from.
I would appreciate seriously any help in this regard.
~Yours Sincerely

Hi
Below given the flow and table details for a given class and class type.
- Table KLAH --> This contains the "Internal class no" [ for the given Class & Class type ]
- Table KSML --> This contains the " internal character numbers " [ nothing but characteristics attached to the class ] , which can be fetched with the above fetched internal class no
- Table AUSP --> This table contains the objects ( material ) attached to the internal characters of that class
- Table CABNT --> This table contains the "Description" for the internal character numbers.
- award points if this is ok

How to get the tab when is it pressed?

I have the following situation:
I have an array of JTextField inside a scroollpane. The size of my array is nine or ten depends on some rules. But my window show just four JTextField. So I would like to know how to get the event when I press "tab", just to show the others JTextField while I'm pressing "tab". Because I need this event to scrooll down or scrooll up.
I tried the keylistener, but when I press "tab" any method(keypressed, keyreleased, keytyped) is called.
I also tried the focuslistener. If this event I could scrooll down or scrooll up, but I couldn't do both!!
Can somebody help me??
Thanks anyway!!
Gin

JTextField implements Scrollable interface, which provides information to the enclosing container such as JScrollPane.
Hence when the tab event is fired, you can compute the Rectangle area that should be visible and then call the 'scrollRectToVisible()' method in JTextField. This will inform the JScrollPane to scroll to the rectangle that you mention.
HTH

How to get current tab name or tab id or related info?

Hi ,
I would like to hide/show tabs according to users' page privileges list. So I need get current tab ID or tab Name in runtime environment to know if show/hide it for current user. :APP_USER
Could you please provide any info about this requirement? Or do you have alternative method to control tabs' hide/show?
thanks
Ruiping

最爱用中文 wrote:
Hi Jari,
Thanks for your info. Even if set authorize schema to tabs, I still need to get the relationship between "current tab" and "privilege&users". So I think evrm's hard-code method above is avaliable.I agree with Jari: APEX provides Authorization schemes specifically for this purpose. You need to reverse your thinking on how to implement this.
For more information consult the documentation on APEX security, specifically using authorization schemes to restrict access to pages and control rendering of components.
Tutorial: Adding Security to your Database Application (APEX 4.0)
Use Authorization Schemes to control access/rendering for security ("only managers see/access this page and it's associated tab"); and Conditions to control rendering for functional reasons ("region only displayed if account is in arrears").
Authorization Schemes have the benefits of being reusable, performing better, and allowing central maintenance of security-related code. This makes it easier to change the implementation—say moving from role information held in database tables to groups defined in LDAP.
I worked for a number of years with an application where authorization schemes are not properly used (decisions made before my involvement) and all security and business logic relating to rendering and processing is wrapped up in spaghetti code in conditions. It's impossible to maintain.
It is of course advisable to make both authorization scheme and business logic condition code more reusable and maintainable by locating it in API packages.

How to get active tab strip name using standard function ?

Dear all,
I have 5 Tab strip in my view, how can i know which tab strip is active during runtime ?
Best Regards
Fernand

HI
I hope you may be looking at this thread , hope its a similar requirement as yours
How to get the selected Tab from a TabStrip.
Thanks

Coded UI -VSTS 2012 How to get the tab details from UITabContainerPane(UI Test Control)

Hi Team,
I am quite new to Coded UI. I am trying out the possibility of Coded UI for Spotfire Report Validations which is available in web portal. I have three tabs on my web page. How can get the list of tabs and act on each. In the recorded script i could see that
under UITabContainerPane I can see the tab coming under UITabContainerPane(UITestControl). I am not sure from this parent how will i get the childs to get access to each tabs. Please advice.
Thanks & Regards,
Divya

I tried the following code however when i do a quick watch on div i get a timeout.
public partial class UIMap
public void selectTab()
HtmlDiv div = new HtmlDiv();
div.SearchProperties[HtmlDiv.PropertyNames.Name] = "tab";
HtmlControl controls = new HtmlControl();
controls.SearchProperties.Add(HtmlControl.PropertyNames.Class, "singleTabContainer");
UITestControlCollection collection = controls.FindMatchingControls();

How to get elive tab

how to get elive tab

Right, so does this mean I won't be able to do anything about it? Just have to work on them on an older computer?

How to get partner related information in soa composite

hi,
I have a SOA composite that receives a B2B inbound message from a trading partner.
I have couple of identifiers defined for that trading partner. But using the properties tab in the B2B component of composite I can get access to only one identifier(which is probably used to identify the from party in the first place) of the trading partner.
Is there api to accesses values of other identifiers defined for that trading partner.
Any Idea!!
Thanks,
Anil

The api for getSenderId says
"Returns the sender identification associated with the message
Returns: String sender identification type and value. Example: DUNS 123456789"
In my case I have the partner configured with following identifiers:
DUNS 123456789
PHONE 1000000
If DUNS is used to identify the partner sending the message getSenderId() will return "DUNS 123456789", but I want to access PHONE value. How do I get it?
Thanks,
Anil

How I get firefox tab history even sessionstore.bak file is not working after renamed?

My pc is restart due to power failer. I lost my important tabs. Session restore is not working. Then I renamed sessionrestore.bak file to sessionrestore.js. But still not working. I want get my all tab in sessionrestore.bak again. So please help me to do this.
If any JavaScript function to filter url from sessionrestore.bak is also ok.
Thanks

Do you have clean backup copies of all the sessionstore files? Please do that first to avoid possibly having them deleted or overwritten.
These threads have suggestions on how to "mine" the old files to extract the URLs:
* Using Firefox's Browser Console (formerly known as Error Console): https://support.mozilla.org/en-US/questions/969046#answer-471950
* Using Firefox developer tool "Scratchpad": http://forums.mozillazine.org/viewtopic.php?f=38&t=622036&start=60&p=12098147#p12098147
* Using a third party website: https://firefox-session-restore.herokuapp.com/

How to get Partner Tab in MIGO while reversal mvt type

Similar Messages

Maybe you are looking for