How to get passwords of apps users

12.0.6 and 10.2.0.2.0
We have hundreds of users and they all have complains once in a while
For this purpose, we need to login witht hier accounts so we have to ask them the passwords
Is there anyway we can get to know the password from backend without asking the users
Please advice

Hi;
12.0.6 and 10.2.0.2.0
We have hundreds of users and they all have complains once in a while
For this purpose, we need to login witht hier accounts so we have to ask them the passwords
Is there anyway we can get to know the password from backend without asking the usersIf your question how i can learn users password wihtout asking them, My answer for this question is : its not possible. Because as i know users's password keep in db side enycrpted.
Regards;
Helios

Similar Messages

How to get Reports for specific User that how many password has been reset using FIM SSPR in FIM 2010 R2 SSPR

Hi,
How to get Reports for specific User that how many password has been reset using FIM SSPR in FIM 2010 R2 SSPR
Regards
Anil Kumar

Hello there Anil,
A simple way to quickly get a overview is to look at the request history within the portal environment (note that this will expire in a few day based on your environment, after that you would need to FIM Reporting Module - but you could increase this to
maybe 60 days to so, watch the DB size).
To do this you could create some custom search scopes of do some custom queries. The creator of the SSPR activities always has the same GUID so you can use that so search.
In your search scope you can use the following XPath to play with.
- All Password Reset Requests - /Request[Creator='b0b36673-d43b-4cfa-a7a2-aff14fd90522' and Operation='Put']
- All Completed Password Reset Requests - /Request[Creator='b0b36673-d43b-4cfa-a7a2-aff14fd90522' and RequestStatus=‘Completed']
You can play with the "RequestStatus".
Hope this helps.
Almero Steyn (http://www.puttyq.com) [If a post helps to resolve your issue, please click the "Mark as Answer" of that post or "Helpful" button of that post. By marking a post as Answered or Helpful, you help others find the answer
faster.]

How to get the ESS & MSS users in ECC 6.0 into portal

Hi Experts
How to get the ESS & MSS users in ECC 6.0 into portal
Thanks
Daya

Hi,
You need to have SSO in between ECC and portal and use ABAP engine as your UME.
then ECC users can directly login to portal using the same user id and password.
Or you can create the ECC system in portal and user mapping should be done for every user to the ECC system.
Thanks,
gopal

How can reset password of bulk users in one time through AD or script?

how can reset password of bulk users in one time through AD or script?

Hello Mr. Lovely,
Do you have ActiveDirectory Module which shipped with Windows Server 2008 R2? If you have it, you can complete this task very easily.
#First, you need to import ActiveDirectory Module
Import-Module ActiveDirectory
#Second, generate a SecureString which contains the password.
$securePwd = ConvertTo-SecureString -String "P@ssw0rd!" -Force -AsPlainText
#Third, find the Active Directory users ,and use Set-ADAccountPassword for resetng the password.
Get-ADUser -Filter {Name -like "Test*"} | Set-ADAccountPassword -NewPassword $securePwd
Also, you can review following link for more details about the Active Directory cmdlets.
Active Directory Cmdlets in Windows PowerShell
http://technet.microsoft.com/en-us/library/ee617195.aspx
Best Regards,
Greg Gu
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

How to change password for apple user id

how to change password for apple user id

If you can't remember your current password then you should be able to get it reset via this page : http://iforgot.apple.com
If you know your current password then on your phone you can try tapping on your id in Settings > Store and you might be able to change it on your account's screen, or on your computer's iTunes you can log into your account via the Store > View Account menu option and change it on there

How to get list of active users with the details like samaccountname, name, department, job tittle, email in active directoy?

how to get list of active users with the details like samaccountname, name, department, job tittle, email in active directoy?

You can use third party software True Last Logon 2.9.You can export the file in excel for report creation.You can use the trial version this will achieve what you are looking for.
True Last Logon displays the following Active Directory information:
--Users real name and logon name
--Detailed account status
--Last Logon Date & Time
--Last Logon Timestamp (Replicated value)
--Account Expiry Date & Time
--Enabled or Disabled Account
--Locked Accounts
--Password Expires
--Password Last Set Date & Time
--Logon Count
--Bad Password Count
--Expiry Date
--You can also query for any other attribute (Example: Description, telephone Number, custom attibutes etc)
Refer the below link for trial version:
http://www.dovestones.com/products/True_Last_Logon.asp
Best Regards,
Sandesh Dubey.
MCSE|MCSA:Messaging|MCTS|MCITP:Enterprise Adminitrator |
My Blog
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Cant Figure out how to get out of App's like Twitter

I just got my new Q5 (Traded in Curve) \i figured out most of the phone but have not been able to figure out how to get out of App's like Twitter or any browser Apps once \i am in there. I used to have the nice little "back button" on the Curve but no more Back Button on this one Ive tried swipping every which way but loose with no luck. Even when I am in my photos, I can figure out how to go back to the main menu (other than to turn the phone off and turn it back on) Is there a Back button somewhere or is my phone just not working right. please help
Solved!
Go to Solution.

Hello tomanator
To close app, swipe up from the bottom of the screen, and tap X at bottom right of each app.
• Click Likes to appreciate those who helps you
• If your issue solved, mark the best post in your thread as Solution

How to get the list of users who has access for list of tcodes.

How to get the list of users who has access for list of tcodes.

Go to transaction SUIM, this has a number of reports for users/authorisations
open the Where used>Autorization Values>In Users
and double click to execute
in authorisation object, enter S_TCODE
then press the "Enter Values" button
It will offer entry boxes to put the transaction code you are interesed in.
Then execute and the list of users with access to this transaciton code will be returned.

My ipod touch got wet and is no longer working - i purchased a new ipod touch and want to know how i get my purchased apps onto my new ipod

my ipod touch got wet and now is broken - I purchased a new ipod touch and want to know how I get my purchased apps onto my new ipod touch

To restore app data, the apps have to be in the iTunes library of the computer on which you do the restore. The iPod ackup that iTunes makes does not included synced media like apps and music.
To redownload iTunes purchases see:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

How to get the room id & user id in our component

Hi Experts,
Collaboration -> Rooms -> Room Directory
It will show the available rooms
Select restricted room tab in that.
That will show the restricted room list, if you are not a member of the room you can request the room by clicking context menu of the room and select the Request Membership option. Then it will send the mail to the owner of the room.
In that UI commend they mapped with the roomid and userid.
I need to know how to get the room id & user id in our component.
How to get the Room Id dynamically?
Can anybody help me for this?
Helpful answers will appreciate.
Thanks and Regards,
Kathiresan R

Hi Kathiresan,
you can get the Room ID and the User ID over the API.
Getting User ID within WebDynpro application:
IUser user = WDClientUser.getCurrentUser().getSAPUser();
String logonId = user.getUniqueId();
Getting User ID within custom Portal Component:
IPortalComponentRequest request = (IPortalComponentRequest) httpRequest;
IUser user = request.getUser();
String logonId = user.getUniqueId();
Getting Room Id of a user who belongs to this room:
IUser user = request.getUser();
IRooms roomsAPI = (IRooms) PortalRuntime.getRuntimeResources().getService(IRooms.PORTAL_SERVICE_ID);
IRoom[] myRooms = roomsAPI.getAllRoomsForUser(user);
String roomId = "";
for (int i=0; i<myRooms.length; i++) {
IRoom room = myRooms<i>;
if (room.getName.equals('nameOfRoomToFind')) {
roomId = room.getId();
Greets
Denis

Let me know how to get screen size of user..

Hi.
I'm going to change a container size in a screen, dynamically.
I want to know that an user's screen is 1024X768 or others..
Let me know how to get screen size of user's computer.
Best Regards.
Kil - Nam.

Look at Re: SAPgui window size (+)
Regards

How to get system status and user status ?

how to get system status and user status for the given production order?
In which PP table we can
find these?
Thanks&Regards
Satish

Hi Ram,
Use the FM "STATUS_READ" to read both the system and user statuses for an Order.
Alternatively, the following tables store the user and system status info:
JSTO- Status object information
JEST- Individual Object Status
Hope this helps.
Let me know if u need further information.
Regards,
Sonal

HT204034 How to get an Apple App store account without a credit card?

Does anyone know how to get an Apple App store account without a credit card?
When I sign in with my Apple ID it says I did not have an account with the App store, but in order to create one it requires a credit card.
There is NO None option as some articles show when selecting a credit card.

Hello SandraLAVixen,
I understand you would like information on how to use an Apple ID without a credit card. The following article may help:
Create an iTunes Store, App Store, or iBooks Store account without a credit card or other payment method - Apple Support
If you already have an Apple ID
If you've already created your Apple ID, you'll need to add a payment method when you first use it to sign in to the iTunes Store, App Store, or iBooks Store. But you can optionally remove the payment method after you sign in to the store. You won't be asked for a payment method again until you make your first purchase.
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D

How to get event when app is minimized.

How to get event when app is minimized in only windows app, not phone version.

Hi,
Suspending Event will be called when a windows store app is minimized. It will not hit the Suspending Event when minimised while debugging, So you need to trigger it manually from the VisualStudio Toolbar.
Also Read
Application Lifecycle for windows apps
Pradeep AJ

How to change password for sidadm user on HP-UX

Hello
How to change password for <sidadm> user on HP-UX

Hello Jan,
       1.      Log on to the operating system with the <sid>adm user.
       2.      Open a shell.
       3.      Enter the command passwd.
       4.      Enter the old and new passwords
Rohit

How to get passwords of apps users

Similar Messages

Maybe you are looking for