How to get past Final Cut Pro X hanging at 95% exporting to YouTube?

Final Cut Pro X takes hours to process a project to share through YouTube and then hangs at 95%.  What can I do to fix this?

See if you can first upload the video in lesser quality, so if it is HD 1080p, try to scale it down SD or large 540p. You can do that by unchecking the "set size automatically" and choosing the size. Also ensure first that the faster encode (single pass) is on. Then upload the video and see what happens. By the way, how long is your video?

Similar Messages

  • How do I stop Final Cut Pro 10.1 from  introducing artifacts?

    How do I stop Final Cut Pro 10.1 from introducing artifacts?
    Can someone please tell me what do do differently so that my edited video does not develop artifacts that were not in the original camera file.  My Sony HDR CX900 produces crazy detailed XAVC S video that FCPX seems to import with no problem but FCPX is introducing artifacts: some on import and more on share. The artifact in the examples below appears above and below the horizontal rope line on this model boat. Please look closely. It doesn't look to bad here, but it dances on my screen. Also, the video generally degrades much more than I would have hoped. How can I get more professional results?  Sorry for the long post, but more information now might save time and questions.
    Below is a portion of a frame opened in quicktime directly from camera's card.
    Below is the associated Inspector for above frame
    Here is the same after it is imported into FCPX. Optimized and Proxy Media were created, but FCPX seems to select what to play so I can't tell you which one is shown here.
    Here is the associated Inspector capture from FCPX.
    Here is the same frame once again after it is Shared as ProRes 422. Note the horizontal lines above and below the rope lines on this model yacht.
    Here is Inspector for the above file.
    Here is the same once again after it is Shared as H.264 Better Quality.
    I tried converting to Proress with 5Dto RGB and Brorsoft Video Converter. They both went though the process, but introduced similar artifacts.
    How can I get more professional results?
    And here is the associated Inspector for the above video.
    I tried converting to Proress with 5Dto RGB and Brorsoft Video Converter. They both went though the process, but introduced similar artifacts.
    How can I get more professional results?

    Russ H.
    When I right click on the clip in the browser and select Transcode Media, the dialog box opens, Optimize Media is checked, but OK is greyed out. Transcode is not an option. I think this points to the fact that FCPX is doesn't need to transcode XAVC-S or FCPX can't transcode XAVC-S. This is a new Sony codec produced by the new HDR CX900. The codec is HD at 50Mbps.
    Tom Wolsky,
    I selected Optimized Media in the viewer and both the timeline and exports (422 and H.264) look great.
    The 24 second long exported video jumps a couple of times as if skipping a frame, as it plays. Could this be related to 29.97 instead of 30fps?
    Thank you so much for getting the image right. Now if I can just eliminate those couple of small jumps.

  • How to upgrade my Final Cut Pro 6 to X

    How to upgrade my Final Cut Pro 6 to X?

    There is no upgrade to FCPX, you have to buy it for $299.99. Yes, Russ is right, FCPX is very different than previous versions, I realized that I would have to start from scratch with it. Look up free tutorials online, there are a few good ones. If you try and just jump in, you'll get very frustrated very fast. Take the time to learn it before you try any important projects. Read my post:
    https://discussions.apple.com/message/23411640#23411640

  • How Can I transfer Final Cut Pro X to another computer

    How can I transfer Final Cut Pro X to another computer without connecting the two

    As Kappy said, download it from the App Store - this will give you a brand new copy. However unlikely, it's just possible you might be copying a corrupt version from the original computer.
    In the App Store, make certain you use the same Apple ID that the App was purchased with.
    Andy

  • How do you import final cut pro projects into imovie? (like you create a pr

    How do you import final cut pro projects into imovie?
    (like you create a project in final cut but i want to save it, and import it into imovie..

    Hi -
    Mr. Ross is right, there is no direct way to export your project with all it's elements into iMovie.
    If, on the other hand, you have a completed sequence in FCP that you want to export as a finished element, then import into iMovie for you to re-edit or apply titles, music, etc. you would:
    In FCP:
    Click on the Sequence Icon you want to export in your browser.
    Go to the menu File > Export > Quicktime Movie. Give your movie a name a navigate to where you want it stored. Make sure you choose Settings: Current Settings and have the Make Movie Self Contained checked. Click Save.
    Close FCP and open iMovie.
    In iMovie:
    Go to the menu File > Import > Movies and navigate to the movie you just exported from FCP. Choose if you want your movie imported in it's original size, etc.
    Click Import. Your movie will be imported into iMovie.
    Note that using this method only gives you only the elements that made up your FCP sequence, so this may not give you the flexibility you need.
    Hope this helps.
    MtD

  • HT4589 how can I reinstall Final Cut Pro 10.0.6, this action may correct my issues

    how can I reinstall Final Cut Pro 10.0.6, this action may correct my issues

    Thanks, I have found this on the "APPLE" support site; Final Cut Pro X: How to remove and reinstall Final Cut Pro X on; http://support.apple.com/kb/HT5149, which after reading through increased my trepidation ! Your directions are frightingly concise but Just what I needed..

  • How can i buy final cut pro with my account p.s its no u.s id?

    how can i buy final cut pro with my account p.s its no u.s id?

    You are wanting to change your account to US to buy FCPX? Do you have a credit card at least?

  • TS4522 I have a finished project, but Final Cut Pro has grayed out the export option. How do I fix this to upload my file to youtube and burn dvds?

    Hi guys, I really need help trying to figure out why Final Cut Pro will not allow me to export my project. I have done this in the past and had no problems at all with other projects, and I have done nothing different from what i can tell. Any help???

    Hey Tom,
    Thankyou for your help. No, I have done this and it does not work. I have tried clicking and dragging, selecting the file in the project library, selecting individual files etc etc etc. The only thing that may have helped me out was last night...I clicked on a tab in FCP on the far right side (that must have something to do with exporting as well) and a small screen popped up after clicking it stating i cannot export the file while it is still referencing media off of the camera. I dont understand this either? I do have to have my camera connected before FCP will RECOGNIZE the media clips, but they have all been imported to my external hard drive and once i click import from camera, it is complete within seconds, so the hundreds of video clips i am using are obviously saved on there somewhere already....im at a loss here as to what to do. Do i have to literally download ALL MEDIA in each project to my computers hard drive before final cut pro will allow me to export any of the projects i create?? This seems like such backward thinking...I dont have nearly enough room on my computers intenal memory to do this with all my video clips!!!

  • How can I get my Final Cut Pro 7 to Work with 10.8 Lion?

    I get these two messages and then Final Cut Pro shuts down. Please don't tell me to use FCProX because I don't have time to learn a new system and need to edit a project today. Anyone who has real info on this please help! Thank you SO MUCH! xoxo

    Use Disk Utility to repair the permissions on your system disk.
    Download Preference Manager (free) from Digital Rebellion
    http://www.digitalrebellion.com/prefman/
    to trash your FCP preferences.
    MtD

  • HT5127 how do i get the final cut pro X trial for an additional 30 days

    My trail 30days for Final Cut Pro X expired but I remember reading that you can get it for an additional 30days is this true?

    There are 2 ways  .............   you buy a new Mac (or use a different one) and the trial will work for a further 30 days.
    This way you can keep using the trial forever, but it will cost you around £1000 every month to renew your computer.
    The other  way that is free  ............  at the end of each month you completely erase the hard drive and reinstall the OS and all the apps etc.

  • How do I take Final Cut Pro off one computer and move it to a new one?

    I'm using Final Cut Pro Academic, and I can only run the program on one computer. If I'm getting a new computer, how do I move the program from my old computer to my new computer? Is there a way to "deauthorize" my old computer? If there is, I can't seem to find it.
    Any help you could give would be greatly appreciated.
    Thanks,
    Doug

    Excellent! Do I need to do anything to ensure the the program installs on the new computer? Do I need to make sure the computer is connected to the Internet when I uninstall the program from the old computer?

  • How can I make Final cut pro 7 and Yosemite work?

    Hi dear Apple.
    I have this huge problem with Final cut pro 7 and Yosemite.
    I have tried to install it on a Mac book pro that has Yosemite but it doesn't work.
    I have an I mac with finalcut pro 7 working on Lion but I need to upgrade it to Yosemite to be able to use CC Adobe.
    I have a feature film worth 6,7 million SEK with Final cut pro 7 and I can't translate it to XML files to premiere cause it is in its last editing process. I get an error everytime I try. Also the last version of Fcp (X) ***** for a professional editor. So.. My only option is to finish this film in Fcp7.
    How can I use Yosemite and still be able to keep Fcp7?
    Please help me or do something about this issue soon. I bought fcp7 for 11000 SEK at the time that was quite expensive. 

    Hi Meg the dog! Thanx for answering!
    I know it was left to die 4 years ago. I just think its ****** up.. I work with documentaries and it takes quite a while to finish. I have done one for 6 years now. If I had known that Fcp7 was left to die I would never had started to edit 6 years ago...
    I did try this recommended on the forum by another user:
    Go to the app location in finder, CTRL click on the app and choose [Show Package Contents]. A folder [Contents] appears, click on it and choose [MacOS]. You'll see a Unix executable. Double click, you'll start Terminal. At the same time fcp will launch. After fcp is launched, close terminal and confirm when asked. Now fcp is up and running. Close fcp and the next time, just open fcp the normal way. DONE!
    But it doesn't work for me. I can't launch fcp7.
    I have Fcp7 Installed on my I mac and I wonder if that will effect fcp7 if I upgrade to Yosemte?
    I tryed to export XML to work on premiere and this is what happends:
    Any recommendations? I am going crazy here..

  • HT5127 how do you remove final cut pro x

    i had installd a final cur pro x and i  install a final pro cut  but it does not come up so how can i get red of the final pro cut x and find the other one thanks

    Proper installation is to install Final Cut Studio first.  Then install Final Cut Pro X.
    The Final Cut Pro X installation will place the Final Cut Studio apps into a folder called "Final Cut Studio".  Since you can't have two "Final Cut Pro" apps in the same folder.  Then you'd launch FCP X from the Applications folder, and lanuch FCP 7 from the Applications > Final Cut Studio folder.
    Both can live on the same system at the same time quite easily.
    Here is the Apple support document that explains it all in detail for various types of installation.
    http://support.apple.com/kb/HT4722

  • How do I uninstall final cut pro x?

    Hi there.
    Is there a proper way to uninstall Final Cut Pro X, Motion 5, and the new Compressor from my system (10.6.8), or can I just thrash the 3 apps?
    I'd also like to make sure to delete the downloaded additional content, and that my Final Cut Studio (FCP 7.0.3, etc) that's also in this computer doesn't get affected.
    I searched hi and lo and couldn't find any answer of discussion about it. The manual also doesn't say.
    Thank you.

    Hi there.
    I have a way for you to uninstall FCPX, but it may be incomplete (as in it might not delete everything).  Do not use this if you have Final Cut Studio and you want to keep it as this will render it useless and you will have to reinstall.  First delete the program itself.  If you are using a developer preview of Lion follow these steps:
    1. Open Launchpad and find FCPX, Motion 5, and Compressor
    2. Click and hold on the icon, then click the x in the top left corner of the wiggling icon.
    3. Skip down below after the Snow Leopard Part.
    Snow Leopard Steps:
    1.  Find a Mac uninstallation program (Here the one that I use: http://www.freemacsoft.net/AppCleaner/)
    2.  Launch App Cleaner.
    3.  Click on the application folder in your dock and find the 3 apps.
    4.  Drag them into the window that appears when you open App Cleaner.
    5.  Click delete, and then type the administrator password if it asks for one.
    6.  Skip down below.
    Remove (I think all) of the additional content:
    1. Click on finder.
    2. Press CMD + Shift + G
    3. Copy and paste this (replacing username with your actuall username): /Users/Username/Library
    4. Look for and delete the Final Cut Pro, Motion, and Compressor folders.
    5. Follow Step 2 above.
    6. Follow Step 3 above except paste this (and don't replace anything): /Library/Application Support
    7. Look for and delete the Final Cut Pro, Motion, and Compressor folders.

  • How to recover project final cut pro x

    Hi,
    I was working for several hours on a project with Final Cut Pro X and suddently I saw the beach ball spinning and FCP X frozed.  The last action that I did was to ad a title on a scene.
    I already used twice that same type of title on my timeline and I didn't had problem before. Now, when I open the project, FCP X doesn't respond...
    My question is how can I recover my projet ?  Is their a Autosave Vault somewhere ?
    Pleas... help me :-(
    Pierre

    OK,
    I just find a way to work around that problem.
    I dragged my Problematic project out of the «Final Cut Projects». It took a while...
    I relaunched FCP X and I was able to open this project becaus I worked with a sub-timeline.  Whien It opened, I trashed the last title that I made and I quit FCP X.
    I placed the project back in the «Final Cut Projects».
    I crossed my fingers and I open FCP X and everything is back in line.  Ouf!!!
    Thanks for your support and I hope this workaround will help others fighting to get back in line.

Maybe you are looking for

  • GL account

    hi, Can any one help me against GL account statement/ledger  with the opening balane, debit amount, credit amount, closing balance particulerly for Balance sheet a/c. which is required like tally or focus ledgers for giving income tax autharities use

  • How do I create an update form, in a search.asp page.

    I have a search.asp page which when submitted transfers to the results.asp page. In the search I would like to also create an insert statement. The search.asp page has the following. Form: searchForm (Post) Text Field: KeywordSearch List Menu: Catego

  • How do extract one page from one pdf document and save as a new pdf?

    How do I extract one page from a pdf document and create a new document?

  • Plan cost in Co03 - Cost Itemization

    Hi all, I enter Co03 and Go to Cost - Cost Itemization - Plan Cost. This Plan Cost is constance after i TECO this order. So I want to know Where does SAP store this Constance Plan Cost (PLAN COST after Teco) ? Best Regard,

  • Restricting Authorization for movement types for Storage Location

    Hi Xperts I have a requirement that 313 & 315 material movements should not have any BBD/SLED check.However , 314 & 316 should have BBD/SLED check. Suppose there are two storage locations : A(Good Stock) & B(Blocked Stock). I want one User-ID should