How to get photos to show as same size
I transfered photos from iPhoto to Aperture.
Many of the photos were taken with different cameras or a film scanner or downloaded from an email.
in iPhoto they show in the view screen as the same size, IOW's they fill the entire view window screen.
In Aperture they are different sizes, I am thinking based on file size.
Is there a way to adjust the view screen to have all the images fill the screen without adjusting the image (enlarge) size.
Example:
To fill the screen with my Nikon DLSR's the screen is 33% but my Film scanner Tiff photos need a 100% to fill the screen.
I hope I explained the issue properly.
Greg
Greg,
I'm unable to replicate your problem. I found a project in my library which has 3:2 aspect ratio DSLR photos, as well as 4:3 point-and-shoot photos. I switched to the "Viewer" mode, and I can arrow back and forth between them and they will as much of the viewer as possible.
Is there a way to adjust the view screen to have all the images fill the screen without adjusting the image (enlarge) size.
What is the "view screen"?
To fill the screen with my Nikon DLSR's the screen is 33% but my Film scanner Tiff photos need a 100% to fill the screen.
How exactly are you viewing your photos? Do you have zoom on, trying to view the photos?
nathan
Message was edited by: Mr Endo
Similar Messages
-
my old emails and documents are not showing up in email or finder both from the same date and I cannot find them anywhere. I do not believe I have any archive settings on. Any idea how I get them to show up?
Hello gpbondi,
The following article provdies step-by-step instructions for downloading your purchases both in iTunes and on your devices.
Download past purchases
http://support.apple.com/kb/HT2519
Cheers,
Allen -
How to get photos on ipod onto pc
my computer recently crashed and i lost all of my photos that were saved on my computer. fortunately i have them all saved on my photo ipod. i was just wondering how to get photos off of my ipod and back onto my computer. thanks!
http://discussions.apple.com/message.jspa?messageID=797432#797432
That is a link to get your songs back, in case you lost those too.
As for your pictures, this may or may not work, but it's worth a shot.
Also, unless you put the full picture onto the iPod (there is a setting to only put what would be viewable on the ipod onto the ipod), they may turn out smaller.
1. Open iTunes, open Preferences (in the Edit menu). This will stop iTunes from seeing the iPod, so it won't try to update it. You can see the above link for more inforation about that.
2. Open the iPod in My Computer. (may show up as a removable disk or as the name of your iPod, funess' iPd, for example.
This is where I become unsure of how this will work
Try finding the photos in the iPod's folder that you just opened. See if you can drag them to another place on your computer. That may or may not work, but it's worth a shot, in my opinion
I hope this helps! -
how to get photos from mac to iPhone 6? when i try it just comes up iCloud instead of my photos
Make sure Settings > iCloud > Photos > iCloud Photo Library (Beta) = "Off"
Then sync your iPhone using iTunes and make sure your sync settings for photos are set correctly in iTunes. -
How to get photos from an email message into iPhoto?
Not sure if this is for the iPhoto forum or the Mail forum, but here we go:
I'm trying to figure out how to get photos I've received by email (through Mail) into iPhoto. I seem to remember seeing Jobs demonstrate it onstage a year or two ago but I can't remember what he did. I recall it was a simple one or two step process.
Any help?Still works for me
on an e-mail with photos attached go to the Save button next to the attachments list, point to the triangle to the right of Save inside the button and hold the left mouse button down - a menu will appear with save all at the top entry, a list of photos below that and "add to iPhoto" as the bottom entry - move your pointer down to the "add to iPhoto" and release and your photo will be a new event in iPhoto
Larry Nebel -
Acrobat X Pro. How to get tab to show up in Microsoft Office ribbon?
Acrobat X Pro. How to get tab to show up in Microsoft Office ribbon?
Hi ebender888,
Which Office version are you using?
If it's Office 2013 then Acrobat 10 pdfmaker is not compatible.
Please refer: http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html#main_ PDFMaker_compatible_applications
Regards,
Rave -
How to get two parameters in the same line of selection screen?
hello
i need to get my selection csreen like bellow.
r1 radiobuttion -some space --p1 parameter
i should not get the parameter in the next line of radiobuttion.
how to get two parameters in the same line of selection screen?hi....
modify the following code
it will work
SELECTION-SCREEN BEGIN OF BLOCK SL1 WITH FRAME TITLE TEXT-003.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 10(15) TEXT-001
FOR FIELD P1.
SELECTION-SCREEN POSITION POS_LOW.
PARAMETERS : P1 TYPE C USER-COMMAND R2 RADIOBUTTON GROUP R2 DEFAULT 'X',
P2 TYPE SCARR-CARRNAME,
P3 TYPE CHAR1 RADIOBUTTON GROUP R2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK SL1. -
How to get photos from iPhoto back onto a SD card. I have a MacBook Pro with built in SD card slot. I have tried "Export" but this does not work.
It's best to export the photos to a folder and then drag the folder onto the memory card. Memory cards are usually formatted for PCs, FAT 32, which doesn't permit more than a limited number of files in the root directory. Putting the photos in a folder gets around that limitation.
OT -
How to get photos from camera or memory card into new macbook?
how to get photos from camera or memory card into newly announced macbook? thank you joanlvh
And to diversify the use of that port, you could get this specialized adapter:
http://store.apple.com/us/product/MJ1K2AM/A/usb-c-digital-av-multiport-adapter
The cost of admission is modest - at $79 - for what all that it does. -
so when i plug any of my devices into laptop windows recognizes it but itunes wont. how to get itunes to show device pluged in
Hello, joegoducks.
Thank you for visiting Apple Support Communities.
If your device is not recognized by iTunes, I would recommend the steps in the article below. Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H. -
I cannot get photos to show full screen in slideshow
I'm cannot get photos to show in full screen on slideshow while mirroring to my TV
I don't use netflix yet on mine but the slow startup I might be able to help. I just restarted mine and in maybe 5 seconds is restarted.
If you have a lot of programs running in the background that may be causing the slow start or shutdown. To close those running programs, 4 finger upto get to the running programs and to close them, tap one and hold for a second and flip upwards,, it will go off the top of the screen, closing it. Do this with all that you want closed, there will only be the main screen you can't close that will be left.
I also shut off location services, Bluetooth and under safari there a use data option which for some reason turned on but I could have clicked yes somewhere and those got turned on, but I turned them off since I don't need them on.
Then try a restart. -
How i get photos in iphone4s from windows7 pc?
now i am using iphon4s. it is an enjoyable experience to me. it is my first iphone use, that is why i dont understand how i get photos from my windows7 pc.? plz help me...i have haul of imotional pictures in my pc which i want to attach with me 24/7 through my iphone.....
Hi
This should help you:
http://support.apple.com/kb/ht4236
Hope this helps -
i am in the caribbean and we speak english but netflix shows everything in spanish or some other foreign language and im clueless about how to get it to show in english can someone please help me with this issue
bump
-
How to get photos from pc to iphone ?
how to get photos from pc to iphone?
1. Connect your iDevice to your computer with the USB connector. Open iTunes and select your device from the left sidebar. Then, select the photos tab from the top menu.
2. Organize and sync.
First choose where you’d like to sync your photos from. I use iPhoto, but you can use any photo management system.
Check the box next to each album &/or event you’d like to sync.
Alternatively, you could put all the photos you want to transfer into a separate folder on your computer, and choose to sync just that folder from the drop down menu.
Notice that I’ve checked the box “Include videos” so any included videos will also sync.
When your selections are made, click “Apply” and the photos will sync to the photo library on your device. -
TS3697 how to get photos into itunes
New to itunes want to know how you get photos from pc into itunes. step by step would be appreciated. ta
You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
Cheers, Tom
Maybe you are looking for
-
HI all, In Which table could I get the customer open items up to some date...?
-
I have two devices (Iphone and Ipad) on the same Apple ID. When I go to Icloud and click at the "find Iphone" I see only one of my devices. How can I do to see both of them?
-
Hi, Oracle released OIM 9.1 but with NO upgrade path included. Oracle promises to roll out the upgrade patch by June 08. Hope it materializes. It is still not clear if they would add any more (older) OS and App Server versions to the supported list b
-
Dear Experts and friends, I have created a infoset using the logical database sdf, and have created a query adding two more tables( mara and marm) giving conditions. The problem is when i try to add some fields under basic list for list output the me
-
Illustrator CS3 crashes in mac os 10.5.8
hi, in the last days my illustrator (and photoshop, and Dremaweaver) has been crashing all the time, for no reason (i think!). Someone can help me in this issue? thanks! below the report: Process: Adobe Illustrator [394] Path: /App