How to get planned value in project module

Dear all,
Please can any one tell me the table name where the planned value is stored.
Navigation:
In project self service there is tab called reporting-->planned value
I could not able to find the planned value in any of the tables.
Please any one help me.....
Thanks
Prakash.V

Hi,
Please check these forums regarding your question:
http://forums.oracle.com/forums/category.jspa?categoryID=3
best regards

Similar Messages

How to get sysnr value in a Function Module

Hi all,
I need to get the sysnr(system number) value of the R/3 system. I execute a RFC function module and need to get the value of sysnr of the system it executes in as a return parameter. Can somebody tell me how to get this value in the function module and return it.
Thanks and Regards,
Pratik

Hello Pratik
The system number has to be defined in the RFC destination. Thus, select on your local system (where you call the RFC function module) the corresponding RFC destination from table <b>RFCDES</b>. In field RFCDES-RFCOPTIONS you will find a string like this:
H=<ip address>,S=21,R=N, ...
S=system number
Regards
Uwe

How to get parameter value from report in event of value-request?

Hi everyone,
The customer want to use particular F4 help on report, but some input value before press enter key are not used in event of "at selection-screen on value-request for xxx", How to get parameter value in this event?
many thanks!
Jack

You probably want to look at function module DYNP_VALUES_READ to allow you to read the values of the other screen fields during the F4 event... below is a simple demo of this - when you press F4 the value from the p_field is read and returned in the p_desc field.
Jonathan
report zlocal_jc_sdn_f4_value_read.
parameters:
p_field(10)           type c obligatory, "field with F4
p_desc(40)            type c lower case.
at selection-screen output.
perform lock_p_desc_field.
at selection-screen on value-request for p_field.
perform f4_field.
*&      Form f4_field
form f4_field.
*" Quick demo custom pick list...
data:
    l_desc             like p_desc,
    l_dyname           like d020s-prog,
    l_dynumb           like d020s-dnum,
    ls_dynpfields      like dynpread,
    lt_dynpfields      like dynpread occurs 10.
l_dynumb = sy-dynnr.
l_dyname = sy-repid.
*" Read screen value of P_FIELD
ls_dynpfields-fieldname = 'P_FIELD'.
append ls_dynpfields to lt_dynpfields.
call function 'DYNP_VALUES_READ'
    exporting
      dyname     = l_dyname
      dynumb     = l_dynumb
    tables
      dynpfields = lt_dynpfields
    exceptions
      others     = 1.
check sy-subrc is initial.
*" See what user typed in P_FIELD:
read table lt_dynpfields into ls_dynpfields
    with key fieldname = 'P_FIELD'.
*" normally you would then build your own search list
*" based on value of P_FIELD and call F4IF_INT_TABLE_VALUE_REQUEST
*" but this is just a demo of writing back to the screen...
*" so just put the value from p_field into P_DESC plus some text...
concatenate 'This is a description for' ls_dynpfields-fieldvalue
    into l_desc separated by space.
*" Pop a variable value back into screen
clear: ls_dynpfields.
ls_dynpfields-fieldname = 'P_DESC'.
ls_dynpfields-fieldvalue = l_desc.
append ls_dynpfields to lt_dynpfields.
call function 'DYNP_VALUES_UPDATE'
    exporting
      dyname     = l_dyname
      dynumb     = l_dynumb
    tables
      dynpfields = lt_dynpfields
    exceptions
      others     = 0.
endform.                                                    "f4_field
*&      Form lock_p_desc_field
form lock_p_desc_field.
*" Make P_DESC into a display field
loop at screen.
    if screen-name = 'P_DESC'.
      screen-input = '0'.
      modify screen.
      exit.
    endif.
endloop.
endform.                    "lock_p_desc_field

How to get the values of Select-options from the screen.

The value of parameter can be obtained by function module 'DYNP_VALUES_READ' but How to get the values of Select-options from the screen? I want the F4 help values of select-options B depending on the values in Select-option A.So I want to read the Select-option A's value.

Hi,
Refer this following code..this will solve your problem...
"Following code reads value entered in s_po select options and willprovide search
"help for s_item depending upon s_po value.
REPORT TEST.
TABLES : ekpo.
DATA: BEGIN OF itab OCCURS 0,
ebelp LIKE ekpo-ebelp,
END OF itab.
SELECT-OPTIONS   s_po FOR ekpo-ebeln.
SELECT-OPTIONS s_item FOR ekpo-ebelp.
INITIALIZATION.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_item-low.
DATA:
dyn_field TYPE dynpread,
temp_fields TYPE TABLE OF dynpread,
zlv_dynpro TYPE syst-repid.
zlv_dynpro = syst-repid.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname     = zlv_dynpro
      dynumb     = syst-dynnr
      request    = 'A'
    TABLES
      dynpfields = temp_fields
    EXCEPTIONS
      OTHERS     = 0.
LOOP AT temp_fields INTO dyn_field.
    IF dyn_field-fieldname EQ 'S_PO-LOW'.
        SELECT * INTO CORRESPONDING fields OF TABLE itab FROM ekpo
        WHERE ebeln EQ dyn_field-fieldvalue.
        EXIT.
    ENDIF.
ENDLOOP.

How to get the value of a variable in FOX?

Hi,
In the FOX program how to get the value of a variable defined in planning area?
can anyone give me some sample code?
thanks

Adding to the last reply,
you can use VARI(variable) to get the count of the values.
In the latest version of BPS, you may also use the following new foreach construct:
FOREACH var IN VARIABLE variable_id.
Regards - Ravi

How to get default values while using the transaction "BP"

Hi Group,
I have a query on how to get default values while using the transaction <b>BP</b>?
The thing is:
when I enter into the transaction "BP", I need to see some default values to some of the input fields in the screen.
how can I achieve this?
So please kindly let me know the procedure to achieve this.
Thanks & Regards,
Vishnu.

Hi,
The events of BDT can be used to default some fields on creating a partner.
For this create a function module for ISDAT. attach that event in BUS7.
In the ISDAT funtion modulethe following code should be used.
For example to set the nationality:
I_BUSDEFAULT-NATIO = 'DE.
CALL FUNCTION 'BUP_BUPA_FIELDVALUES_SET'
EXPORTING
i_busdefault = I_BUSDEFAULT
Regards, Smita.

How to Get Resource value which are referred in code behind file using IResourceProvider

Hi Everyone,
Currently I'm working on moving the Resource file from "App_GlobalResources" to Database by using IResourceProvider. I created a CustomResourceProvider project using ResourceProviderFactory and able to get the resource values from DB which
are used in aspx page.
But i'm not able to get the values which are referring from code behind file.
Ex: Label1.Text = Resources.Common.Car; // This is still coming from resx file.
Can any one please let me know how to get the value from DB instead of resx file which are referred in cs file.
Appreciate your help.
The below code uses the ResourceProviderFactory which calls this method and gets it from DB. Please let me know if you need any more info.
public class DBResourceProviderFactory : ResourceProviderFactory
public override IResourceProvider CreateGlobalResourceProvider(string classKey)
return new DBResourceProvider(classKey);
public override IResourceProvider CreateLocalResourceProvider(string virtualPath)
// we should always get a path from the runtime
string classKey = virtualPath;
if (!string.IsNullOrEmpty(virtualPath))
virtualPath = virtualPath.Remove(0, 1);
classKey = virtualPath.Remove(0, virtualPath.IndexOf('/') + 1);
return new DBResourceProvider(classKey);
Regards, Ravi Neelam.

Hi Ravi Neelam.
>>Currently I'm working on moving the Resource file from "App_GlobalResources" to Database by using IResourceProvider.
Based on this message, your issue related to web application, questions related to Asp.Net should be posted in
Asp.Net forum.
Please reopen a new thread in that forum. You will get more efficient response.
Regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to get SENSOR_PROPERTY_CHANGE_SENSITIVITY value?

I can't get the correct SENSOR_PROPERTY_CHANGE_SENSITIVITY value. Example: I want to get the SENSOR_PROPERTY_CHANGE_SENSITIVITY value of SENSOR_TYPE_ACCELEROMETER_3D sensor, but I can only get VT_UNKNOWN when I use ISensor::GetProperty method. I use
the followed code, I can get three times SENSOR_DATA_TYPE_TIMESTAMP's value. But the SENSOR_PROPERTY_CHANGE_SENSITIVITY values of the SENSOR_TYPE_ACCELEROMETER_3D include SENSOR_DATA_TYPE_ACCELERATION_X_G, SENSOR_DATA_TYPE_ACCELERATION_Y_G
and SENSOR_DATA_TYPE_ACCELERATION_Z_G when it is setted. How to get SENSOR_PROPERTY_CHANGE_SENSITIVITY value?Thanks.
void GetReportSensitivity(ISensor *pSensor, PROPERTYKEY key)
wprintf(L"GetReportSensitivity begin\n");
HRESULT hr = S_OK;
DWORD cVals = 0, i, j;
IPortableDeviceKeyCollection* pKeys = NULL; // Input
IPortableDeviceValues* pValues = NULL; // Output
PROPERTYKEY pk; // Keys
PROPVARIANT pv = {}; // Values
hr = CoCreateInstance(CLSID_PortableDeviceKeyCollection, NULL, CLSCTX_INPROC_SERVER, IID_PPV_ARGS(&pKeys));
hr = pKeys->Add(SENSOR_PROPERTY_CHANGE_SENSITIVITY);
hr = pSensor->GetProperties(pKeys, &pValues);
IPortableDeviceValues *pChangeSensitivities; // This contains the {data field => change sensitivity} mapping
hr = pValues->GetIPortableDeviceValuesValue(SENSOR_PROPERTY_CHANGE_SENSITIVITY, &pChangeSensitivities);
hr = pChangeSensitivities->GetCount(&cVals);
wprintf(L"cVals = %d\n", cVals);
for (i = 0; i < cVals; i++)
wprintf(L"GetReportSensitivity i = %d\n", i);
hr = pValues->GetAt(i, &pk, &pv);
for (j = 0; j < SENSORDATATYPENUM; j++)
if (IsEqualPropertyKey(pk, g_sensorDataTypeMapping[j].sensorDataType) == 0)
break;
wprintf(L"%s: ", g_sensorDataTypeMapping[j].strSensorDataFormalType);
PrintPropvariantValue(pv);

Hi phenix76,
Thanks for posting in MSDN forum.
Form your description, you code is related to sensor API programming. C++ forum may not a good chioce to ask this issue, I would like suggest you post this to the
Windows Hardware WDK and Driver Development forum . I will help you move this to there. Thanks for understanding.
Best regards,
Shu Hu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to get the values from popup window to mainwindow

HI all,
   I want to get the details from popup window.
      i have three input fields and one search button in my main window. when i click search button it should display popup window.whenever i click on selected row of the popup window table ,values should be visible in my main window input fields.(normal tables)
   now i am able to display popup window with values.How to get the values from popup window now.
   I can anybody explain me clearly.
Thanks&Regards
kranthi

Hi Kranthi,
Every webdynpro component has a global controller called the component controller which is visible to all other controllers within the component.So whenever you want to share some data in between 2 different views you can just make it a point to use the component controller's context for the same. For your requirement (within your popups view context) you will have have to copy the component controllers context to your view. You then will have to (programmatically) fill this context with your desired data in this popup view. You can then be able to read this context from whichever view you want. I hope that this would have made it clear for you. Am also giving you an [example|http://****************/Tutorials/WebDynproABAP/Modalbox/page1.htm] which you can go through which would give you a perfect understanding of all this. In this example the user has an input field in the main view. The user enters a customer number & presses on a pushbutton. The corresponding sales orders are then displayed in a popup window for the user. The user can then select any sales order & press on a button in the popup. These values would then get copied to the table in the main view.
Regards,
Uday

How to get return values from task flow in af:region ?

Hi!
I'm working with a taskFlow that is rendered inside a popup using the "popup inside a region pattern" (http://www.oracle.com/technology/products/adf/patterns/popupregionpattern.pdf), but now this taskFlow has an input parameter and a return value definition. So the question is how to get a value returned by this taskFlow thas is called inside a region?
Any suggestion?
Thanks in advance!

Hi,
write the value to a shared memory scope like session and read it in the regionNavigation listener. If you follow the paper you refer to then the listener determines of the viewId is null, this a return happens. It wuld then look in the memory scope for the return value.
Another option would be to use an object that you pass as an argument to the task flow you open in the popup. Then you change the object you passed in, which then makes the return information available in teh calling flow. The object you pass in would have to be in a shared scope too
Frank

How to get each value from a parameter passed like this '(25,23,35,1)'

Hi
One of the parameter passed to the function is
FUNCTION f_main_facility(pi_flag_codes VARCHAR2) return gc_result_set AS
pi_flag_codes will be passed a value in this way '(25,23,35,1)'
How to get each value from the string
like 25 first time
23 second time
35 third time
1 fourth time
I need to build a select query with each value as shown below:-
(SELECT t2.org_id, t4.description
from org_name t2, ref_org_name t3, code_table t4
where t2.att_data = t4.code
and t3.ref_code = t2.att_type
and t2.att_type = 25 and t3.code_type = t4.code_type
and to_date('01-JAN-10', 'DD-MON-YY') between t2.att_start_date AND t2.att_end_date) q1,
(SELECT t2.org_id, t4.description
from org_name t2, ref_org_name t3,code_table t4
where t2.att_data = t4.code
and t3.ref_code = t2.att_type
and t2.att_type = 23 and t3.code_type = t4.code_type
and to_date('01-JAN-10', 'DD-MON-YY') between t2.att_start_date AND t2.att_end_date) q2,
(SELECT t2.org_id, RTRIM(xmlagg(xmlelement(e, t4.description || ';')
ORDER BY t4.description).EXTRACT('//text()'), ';') AS DESCRIPTION
from org_name t2, ref_org_name t3,code_table t4
where t2.att_data = t4.code
and t3.ref_code = t2.att_type
and t2.att_type = 35 and t3.code_type = t4.code_type
and to_date('01-JAN-10', 'DD-MON-YY') between t2.att_start_date AND t2.att_end_date
group by t2.org_id) q3,
(SELECT t2.org_id, t4.description
from org_name t2, ref_org_name t3, code_table t4
where t2.att_data = t4.code
and t3.ref_code = t2.att_type
and t2.att_type = 1 and t3.code_type = t4.code_type
and to_date('01-JAN-10', 'DD-MON-YY') between t2.att_start_date AND t2.att_end_date) q4
Please help me with extracting each alue from the parm '(25,23,35,1)' for the above purpose. Thank You.

chris227 wrote:
I would propose the usage of regexp for readibiliy purposes and only in the case if this doesnt perform well, look at solutions using substr etc.
select
regexp_substr( '(25,23,35,1)', '\d+', 1, 1) s1
,regexp_substr( '(25,23,35,1)', '\d+', 1, 2) s2
,regexp_substr( '(25,23,35,1)', '\d+', 1, 3) s3
,regexp_substr( '(25,23,35,1)', '\d+', 1, 4) s4
from dual
S1 S2 S3 S4
"25" "23" "35" "1"In pl/sql you do something like l_val:= regexp_substr( '(25,23,35,1)', '\d+', 1, 1);
If t2.att_type is type of number you will do:
t2.att_type= to_number(regexp_substr( '(25,23,35,1)', '\d+', 1, 1))Edited by: chris227 on 01.03.2013 08:00Sir,
I am using oracle 10g.
In the process of getting each number from the parm '(25,23,35,1)' , I also need the position of the number
say 25 is at 1 position.
23 is at 2
35 is at 3
1 is at 4.
the reason I need that is when I build seperate select for each value, I need to add the query number at the end of the select query.
Please see the code I wrote for it, But the select query is having error:-
BEGIN
IF(pi_flag_codes IS NOT NULL) THEN
SELECT length(V_CNT) - length(replace(V_CNT,',','')) FROM+ ----> the compiler gives an error for this select query : PLS-00428:
*(SELECT '(25,23,35,1)' V_CNT FROM dual);*
DBMS_OUTPUT.PUT_LINE(V_CNT);
-- V_CNT := 3;
FOR L_CNT IN 0..V_CNT LOOP
if L_CNT=0 then
V_S_POS:=1;
V_E_POS:=instr(pi_flag_codes, ',', 1, 1)-1;
else
V_S_POS:=instr(pi_flag_codes,',',1,L_CNT)+1;
V_E_POS:=instr(pi_flag_codes, ',', 1, L_CNT+1)-V_S_POS;
end if;
if L_CNT=V_CNT then
V_ID:=TO_NUMBER(substr(pi_flag_codes,V_S_POS));
else
V_ID:=TO_NUMBER(substr(pi_flag_codes,V_S_POS,V_E_POS));
end if;
VN_ATYPE := ' t2.att_type = ' || V_ID;
rec_count := rec_count +1;
query_no := 'Q' || rec_count;
Pls help me with fetching each value to build the where cond of the select query along with the query number.
Thank You.

How to get selected value from selectOneRadio ???

Hi...i want to how to get selected value from selectOneRadio and use it in another page and in backing bean.
Note i have about 10 selectOneRadio group in one page i want to know value of each one of them.
Plzzzzzzzz i need help

You have a datatable in which each row is a question, correct?
Also in each row you have 5 possible answers that are in a radio, correct?
So,
You need to put in your datatable model, a question, and a list of answers (5 in yor case) and the selected one.
So you will have a get to the question, an SelectItem[] list to populate the radios and another get/set to the selected question.
ex:
<h:selectOneRadio value="#{notas.selectedString}" id="rb">
<f:selectItem itemValue="#{notas.valuesList}"/>
</h:selectOneRadio>
Search the web for examples like yours.

How to get actual value from LOV list

Like Subject says: How to get actual value from LOV list. Any help will be appreciated.
Thanks.

Thanks Shay, I did it with bind variable because I'm not using JSF. Is there any chance to post solution using standard JSTL or HTML expression. I have something like this: LOV displays some Companies names:
<html:select property="UserJobCompanyId"
                         disabled="${!bindings[\'UserJobCompanyId\'].updateable}"
                         onchange="submitform();">
              <html:optionsCollection label="prompt" value="index" property="UserJobCompanyId.displayData"/>
            </html:select>and I want to get CompanyID of selected Company.
Thanks, again.

How to get column value from DB grid

Hi!
I wander how to get col value from GridControl?
My app consists of one rowsetinfo with two
columns CODE and DESCRIPTION and a jbutton
titled SELECT. When user clicks SELECT button
the app should show the value of the CODE col
of the selected row in GridControl.
I wander how to make this action ?
XxpsTransTimesMasterIter.setAttributeInfo( new AttributeInfo[] {
CODEXxpsTransTimesMasterIter,
DESCRIPTIONXxpsTransTimesMasterIter} );
XxpsTransTimesMasterIter.setName("XxpsTransTimes");
XxpsTransTimesMasterIter.setQueryInfo(new QueryInfo(
"XxpsTransTimesMasterIterViewUsage",
"lov.XxpsTransTimes",
"CODE, DESCRIPTION",
"XXPS_TRANS_TIMES",
null,
null
));

Hi,
You could attach an ActionListener on the JButton, and try the following code :
NavigationManager fm = NavigationManager.getNavigationManager();
DataItem dataItem = fm.getFocusedControl().getDataItem();
ImmediateAccess col_code = null;
String code = null;
if (dataItem != null && dataItem instanceof RowsetAccess) {
RowsetAccess rowset = (RowsetAccess)dataItem;
try {
col_code = (ImmediateAccess) rowset.getColumnItem("CODE");
code = col_code.getValueAsString();
} catch (DuplicateColumnException de) {
return;
} catch (ColumnNotFoundException ce) {
return;
} catch (SQLException se) {
return;
JTextField tf = new JtextField();
tf.setText(code);
I haven't tested this code.
I am curious to know, the Object type of the dataItem.If it doesnot happen to be RowsetAccess ..try.. ScrollableRowsetAccess OR ImmediateAccess.
Your code would change accordingly, depending on the instance.Refer to the product documentation for this.
Do let me know, if this works.
TIA
Sandeep

How to get string value from xml in JSF??

In JSF How to get string value from xml, .ini and properties file. I want to get string value from xml or text to JSF

Just use the appropriate API's for that. There are enough API's out which can read/parse/write XML, ini and properties files. E.g. JAXP or DOM4J for xml files, INI4J for ini files and Sun's own java.util.Properties for propertiesfiles.
JSF supports properties files as message bundle and resource bundle so that you can use them for error messages and/or localization.

How to get planned value in project module

Similar Messages

Maybe you are looking for