How to get plant wise Vendor Balance

Dear All ,
Kindly tel me How to Get Vendor Balance at Plant level.
Regards
Girish

Hi Girish,
we can give the customer balance through Plant wise in standard SAP
But vendor balance not possible in plant wise.
For that you can do customise userexit
Regards
Surya

Similar Messages

  • How to display Plant wise Trail Balance

    Dear SAP Experts,
    Can you let me have the T-code to review Plant wise Trail Balance?
    Best Regards...

    Hi,
    Thanks for your support experts. Business area is a good option because it will display both B/S and PnL items. Profit Center will only show PnL Items.
    We have not implemented business areas although the company is still running. Once it is configured, I will make it as a required entry so that all accounting documents will require this field to complete the process. Then it will show the complete balances of the business areas in the Trial Balance. Any data entered before this configuration will not be useful isn't it?
    Please correct me if I am wrong.
    One more thing, should I configure it after the year end (V6) or from now on?
    Thank you once again for your support experts...

  • How to get plant wise distribution channels

    My requirement as follows.
    i want to get the materials combination of  plant and distribution channels..
    how to mix the plant and distribution channel..
    is there any code for that...

    SELECT a~matnr
             a~werks
             b~vkorg
             b~vtweg
      FROM marc AS a INNER JOIN
           mkve AS b ON a~matnr = b~matnr                    
      INTO TABLE itab WHERE a~matnr IN s_matnr
                           AND a~werks IN s_werks.
    Please reward if useful.

  • Profit Center wise Vendor Balance

    Dear Sir,
    Kindly guide us as how can we get a report / information for "PRFOFIT CENTER wise VENDOR Balances " . I tried with FBL1n but it give Balance without Profit Center . We are using ECC-6 .
    We assure to give full points for the suggested solution pl .
    Kindly help me pl .
    Rgds
    B Mittal

    Hi BV,
    You will not get Profit Center wise payables information from FBL1N,though you can see the profit center field in FBL1N. This Profit center is the profit center sitting in BSEG table and with ECC 6.0 if you are using new GL, then Profit center wise details are available in FAGLFLEXA.
    The other report as mentioned in one of the replies above is also there but its presentation is not so good as of FBL1N.
    And the other option is to develop a Z report for Profit center wise payables. We have done it for receivables and it is working fine.
    Regards,
    SAPFICO

  • Plant wise trial balance

    Hi,
    My Client is asking the plant wise balance sheet.
    We have only company code and we are not using business area concept and we are working on ECC 6.0.
    If we implemented business area concept, is it possbile to get the plant wise trail balance.
    Please guide me
    Aparna

    Hi,
    Are you mapped your plant to single profit center?if so,you will create report painter report for trail balance.
    if you created your plant as a segment and assinged segment to all your profit centers.then you can create customer trail balance report per segment.
    hope this helps you.
    Thanks,
    Rau

  • In ME2N  report for PO- How to get or add Vendor name in ALV grid output

    Hl Everyone
    How to get  or add Vendor Name and payment terms in the ALV grid output for the follwing reports like ME2N and ME2V.
    cuurently i am in 4.7 E version.
    Kindly suggest..........
    thanks in advance
    Regards
    Prashanth

    Hi Pankaj
    I knew that vendor name field is avaiable in ECC versions, but how to get the same field(vendor name) in 4.7 E vesion.
    Kindly suggest
    Regards
    Prashanth

  • Profit center wise vendor balances

    Hi guys,
    My client want to vendor balances with profit center wise. I know t.code s_ac0_52000888 it displays reconsilation account wise balances I want to  profit center wise balances not reconsilation account wise balances its urgent please help me
    thanks
    syam

    Dear
    Use T.code FBL1N - Display/Change Line Items.
    when you execute the report , select changelayout and select the field profit center, vendor balance and profit center are displayed.
    when the profit center is displayed, select filter and enter the profit centers and profit center wise vendor balances will be displayed.
    Alternately, use dynamic selections in T.code FBL1N selection screen.
    Please let me know if you need more information.
    Assign points if useful.
    Regards
    MSReddy

  • Purchase org wise Vendor Balance

    Dear All ,
    We have a requirement where client wants to view purchase org wise vendor balance since we have two purchase org and vendor supplies to both the purchase org do we have a report where we can see the vendor balances based on purchase organization
    Regards
    Vikas

    Hi,
    Vendor balances : Go to T.code S_ALR_87012093 Or S_ALR_87012079 - Vendor Business and click on  Dynamic selections(Shift+F4) double click on  Business Area and put on the business area and save then Execute (F8)
    Customer Balances :  Go to T.code S_ALR_87012186 Or S_ALR_87012169 - Customer Sales and click on  Dynamic selections(Shift+F4) double click on  Business Area and put on the business area and save then Execute (F8
    Thanks,
    Raviteja
    Edited by: Ravi Teja.T on Jan 4, 2012 12:29 PM

  • Business area wise vendor Balance

    Please i want to know the tcode for Business area wise Vendor Balance, and Customer Balance.
    Thanks in Advance,
    Anand

    Hi,
    Vendor balances : Go to T.code S_ALR_87012093 Or S_ALR_87012079 - Vendor Business and click on  Dynamic selections(Shift+F4) double click on  Business Area and put on the business area and save then Execute (F8)
    Customer Balances :  Go to T.code S_ALR_87012186 Or S_ALR_87012169 - Customer Sales and click on  Dynamic selections(Shift+F4) double click on  Business Area and put on the business area and save then Execute (F8
    Thanks,
    Raviteja
    Edited by: Ravi Teja.T on Jan 4, 2012 12:29 PM

  • How to get DIVISION wise report in Controlling?

    Hi,
    How to get DIVISION wise report in Controlling? I am not trying to get Division in COPA report but i am not able to see Division Characteristic in Operating concern Data structure.
    Kindly help me - where can i get good Controlling report with Division wise? why i am not able to see the Division characteristic in COPA report?
    Thanks
    Kishore

    HI,
    Check this:
    KEA0 ->Data stucture (Display) ->Extras(Menu) -> Display fixed fields. In this pop-up you will see 'Division' (SPART).
    If this field is defined as Segment level characteristic (KEQ3), then you can build reports on this characteristic using KE35.
    Hope this helps.

  • How to create plant wise STO from multiple requisition through Me59N

    How to create plant wise STO from multiple requisition through Me59N

    Due to the different supply plants the system does not know which one
    to use and therefore throws the error message.
    The only workaround would be to create the PO's seperatly per PR item.
    Hoep this helps you

  • Default profit centers Plant wise for Balance Sheet tax relevant Items.

    Dear All,
    We have an issue in profit center acccounting.
    In balance sheet accounts, Vat input tax payable, TDS payable, Cenvat clearing etc are picking profit center from 3KEH. When Exicse is getting captured cenvat clearing account having the profit center but while doing the MIRO cenvat clearing do not have profit center & plant.
    Why it is so?
    Basically we are doing the following steps.
    1. Purchase order creation ME21N.
    2.Goods received via migo
    3. invoice receipt via miro.
    At the time of miro posting, system creates automatically accounting document, with default profit center maintained in 3KEH, which are assigned to Vat input tax payable, TDS payable, other tax accounts. For GR/IR clearing account right profit center is picking without any mistake, while doing MIGO & MIRO.
    We need to extract the Balance Sheet profit center wise at plant level.
    Derivation rule is created for this balance sheet account along with Valuation area condition to post to correct profit center maintained under Tcode: 3KEI . But system is taking only default profit center (3KEH).
    I have checked configuration and the following areas like Material master costing view, tax code areas, and account group but did not find any mistake.
    Please advice and Guide us, how to get correct profit center at plant level for these balance sheet accounts instead of default. (I want to make default profit centers plant wise).
    It is urgent.
    Thanks,
    Shailendra Gupta.

    Hi!
    You can use following report :
    S_ALR_87013336 (Report for Balance sheet at Profit Center and Group Level).
    Hope this will help.
    Thanks & Regards,
    Taral Patel

  • Plant wise trail balance

    Friends,
    My client want to see the Plant Wise balancesheet.
    Please suggest me how should i configure for this.
    they want to see plant wise balancesheet like how we get in f.01.
    I will assign full points to all of you.
    Thank you.
    Regards,
    Reva Naik

    hiii
    In most of the cases SAP facilitates reporting as Business area wise , we have to define Business areas for plant wise , then u will get reports according to Business areas .
    In most of the cases Bus. Area = Plant = Profit Segment
    Hope ur problem will b solved
    can u tell me the confg of TB in Financial Statement Vetrsion ( OB58 ) , i tried the confg of TB but system is calculating Profit defaultly , i didn't assign any GL Acct also... is there any provision to configure TB as per Client's grouping....
    help me
    regards
    ramki

  • Plant wise Vendor List

    Dear All,
    I want to find the list of vendor's plant wise. As you all know the vendor is related to Pur.Org. I am able to get the list based on Pur.Org fro Std SAP tables. But my requirement is to get it plant wise & there are 2 or 3 plants assigned to the same Pur.Org which makes it a prob. So please send a solution to crack the same.
    One more thing from std SAP table LFM2 also I tried but my search didnt find any result.
    Thanks in advance!
    Rgds,
    SAP FC

    choose the table LFA1and in field selection choose WERKS (plant) and run it.
    but it may not help u since vendor is created either at company code level or purchase organization level.
    regards,
    indranil

  • Plant wise Vendor

    We have one Company code and one Purchasing organization and 9 Plants.Now i want to see Plant / Profit centre wise vendors list.
    Is there any specific T-code for Plant wise /Profit centre wise vendors? How to Process this requirement!

    HI,
    Try MKVZ & s_alr_87012086 tcodes,
    Thanks & Regards,
    Kiran

Maybe you are looking for