How to get poster art in the RSS feed using Podcast Producer workflow

With podcast producer there are standard workflow which create atom feeds. I can not figure out how to automatically generate a poster image (or any type of images) associated with the video to show in the rss feed. Anyone got this to work?
Here is the feed of the test site:
feed://switch.macsenior.net:8171/podcastproducer/atom_feeds/4C9A6B5A-4D09-4394-A 846-5407C8BF8FBD
I like to show poster art of an random frame of the movie.

You actually are publishing images. For example:
http://switch.macsenior.net:8171/podcastproducer/feed_logos/4C9A6B5A-4D09-4394-A 846-5407C8BF8FBD.png
http://switch.macsenior.net:8171/podcastproducer/attachments/4C9A6B5A-4D09-4394- A846-5407C8BF8FBD/2EFF4653-5E35-4F9F-B0D1-14C797DAB1C8.png
You aren't seeing these images because of the way Safari parses feeds. Try using curl from the command line or another browser. Safari and Podcast Producer really don't play well together. A good example is trying to use the SSL port to view feeds.
If you'd like to change the image to something common for all episodes in a workflow, select Window > Workflow Inspector in Podcast Composer. Be careful with your image dimensions, as it is posted unaltered.

Similar Messages

I excluded iphone from controls in Keynote. How I get it back on the list to use Keynote remote?

I excluded iphone from controls in Keynote. How I get it back on the list to use Keynote remote?

Welcome to the Apple Community.
If you haven't turned find my phone off on the device, it should just reappear next time it is connected to an appropriate network. If you have turned off find my phone, turn it back on.

How to get form input in the same portlet using pageflow

Hi this is premkumar
i created 2 portlet in a portal how to get form input in the sampe portlet using
pageflow
help as early as possible

Do to the complexity of the program we need to run it with sequences. This is because we need to aquire data with DAQ until it reaches a certain point and then stop collecting so that it can do its process (only once for all times criteria is met), and then loop around till again collecting after DAQ drops back below certain point looking to once again reach that point. Another flat sequence is going outside of this where I want to put the prompt and have a user input to affect how many times that that the inner loop is run (No a For Loop instead of the while loop will not work either for other reasons).
I just want to know if after the program starts you can have a user input that will change the effect of the rest of the programs action based on the number inputed.

How to get BOM compoents at the lowest level using BOM tables?

I am doing a report based on CK13N wherein i hav material and plant as the selection parameters and based on that i get the product costing of the entire BOM.
I pass material to MAST.get the BOM num and usage
Pass it to STAS and get STLKN (ITEM NODE NUMBER)
After that i pass STLKN and STLNR(BOM number) to STPO to get the BOM subitems based on UPSKZ(Sub items indicator). But that fails because UPSKZ is nt set for all the assemblies.
So hw do i get the BOM components at the lowest level USING these TABLES

Ashwin
1) As Taj Said, Sub item is not actually a item or component.
2) The sub item number what we are viewing the sub item sceen will be 001,002 like ,it not mean any item
3) For Example a car has 4 wheels, so the item/component description is WHEEL
4) The BOM Quantity of wheel is 4
5) In BOM General item over view, you can select the wheel then click subitem
6) This will lead to sub item screen
7) There you can see subitem 001,002,003 then installation point,subitem text,qty etc
8) Against installation point you can decalre Front Left,Front Right,Rear Left,Rear Left
9) Against sub item text,qty you can declare Front Left wheel-1,Front Right wheel-1, Rear Left wheel-1, Rear Right wheel-1 no
9) This does not mean there are addition Sub items for wheel (ie) additional BOM component)
10) Just declaring the positions for fitting in the car to ease the Assembly Person for fixing the wheel
11) So if you get the cost for WHEEL as assigned in BOM item then ok, don't worry about sub item cost
Reward me if my answer is helpful
K.Prabakaran

Not Seeing the RSS Feed in Podcast in any iPhone or apple product

Hi,
I'm currently developing a podcast type site in Wordpress and one of the functions they want is the ability to pull an RSS feed of their posts with podcasts into the Podcast app.
I'm using feedburner and have it configured for podcasts and when I try to add the feed manually to Podcast on an iPhone 4 running ios 7 it adds it but it says there are 0 episodes. (on a side note when I try to add it to iTunes I get the same problem) and I get the same problem on an iPhone 5 running ios7.
I suspect there is something about the feed that apple products don't like but since I'm using feedburner and it should be adjust the feed accordingly I'm not sure where the issue is. The feedburner URL is: http://feeds.feedburner.com/timbuild1/IYPr
if anyone can shed any light it would be greatly appreciated, I've searched for hours and read tons of posts, forum posts and articles but I can't find any answers.
thanks

hehe if somebody knows something this is def you Roger about first thing with seeing pic in itunes i think that i read all possible posts on web in last 7 days and nights and this is not working on my pc with control-click (Windows) but i don't care ! i wait for apple do magic bug fixing on new itunes version. And now about main problem. iOS devices are capable displaying chapter images because this is working right now with some podcast on my phone, i give you pic example iphone 4 iOS 6.1.2
in first pic you can see streaming podcast and chapters (little white dots on bar),second picture is first song with cover of single playing, and if you look close right from the clock zzz simbol is chapter logo, if you press it you will be see pic no.3 so this def working but working when you mad your podcast on mac with garage band ! that's why i write about format ids, tags etc
http://i.imgur.com/vy33H9y.png
http://i.imgur.com/g4P5iM1.png
http://i.imgur.com/zDOIwrC.png
i test your podcast episode 36 then episode 33 and 31 ! bad news my friend no chapters and no pictures only one main pic. but when i test your podcast in downcast app in my iphone wooo i see text i see your pic i see chapters i see everything. so that mean it's working everywhere like mine except iphone and ipad app and now we come to theory of garage band things tags in m4a files. you write that you have done all this in podcast maker not garage band. This is now real mistery to me !
i analyze your file here and you have in last section menu1 and menu 2 so maybe problem is somwhere around this, not in format id because you have ok format id like one that working ok

HT1819 How would I go about changing the RSS feed for an already established podcast?

Hello! My co-host and I have recently acquired a website for our show, and we'd like to change the feed for our podcast, but I'm unable to find any real way to do it. Can anyone give me an assist?

Hi Bonesaw,
Whether you grap or snap continuously is up to you. If you don't care about viewing continuously you can snap continuously. Another option is to use the IMAQ sequence VI which grabs a series of images. You can then save those images without worrying about the buffer.
For the buffer you can use the Acquired buffer number output of the Grab acquire VI as the buffer input to your copy acquired buffer VI.
The reason that only the last image is saved is because you are using the same file path for each save. That means that you are overwriting each image when a new image comes up. You can avoid this by building the file path and incorporating the increment counter in the file path. That will give you a new file name for each iteration of the loop.
Nick Keel
Applications Engineering
National Instruments
Nick Keel
Product Manager - NI VeriStand and Model Interface Toolkit
National Instruments

How do I get the RSS feeds to work in iWeb'08 when published to FTP server?

There are so many unresolved questions because I have published to an FTP server (Netfirms). HOWEVER, my next task at hand is to resolve the issue of a non-working RSS feed and download capabilities.
The published website is www.vibrationalvoyages.com.
When using Cyberduck to upload to Netfirms, I have to call the file name vibrationalvoyages.com because Netfirms organizes my files under a main folder called www (I also purchased the .org and .net extensions along with the singular spelling of the title, have forwarded those url's to the .com extension, which means I have different website names under Netfirm's main folder www, all pointing to www.vibrationalvoyages.com).
I have to drop the www. in front of vibrationalvoyages.com when publishing to a folder on my computer so, when Cyberduck uploads the files into the main www folder, they are read correctly and published as www.vibrationalvoyages.com. In Cyberduck, the ftp address to upload is vibrationalvoyage.netfirms.com
Before uploading, I use iTweak to insert the Statcounter tracking codes. Then, I use Rage to optimize the site to cut down on the weight (lots of photos). Then, finally, I get to upload which takes about an hour and a half.
SO, HOW DO I GET THE RSS FEEDS TO WORK AS WELL AS THE OPTION TO DOWNLOAD AN MP3 RECORDED MEDITATIONS? I eventually also want to include the download option of podcasts.
Please help! I am doing the best I can to stay in love with Mac but he is turning out to be a pot load of work and the love affair is wearing a little thin.
I haven't even asked about why iWeb still calls some pages 'The family picnic" or why it switches the url addresses to the individual pages. Probably because in the early stages, I copied an entry rather than just do a new one... but I'll worry about that later. I want to get this 'fixed' first and then I'll address the issue, following Roddy's advice to another writer about installing a flash player, for easy download of the MP3 meditations and for when I record the lessons as podcasts. Until I get this RSS issue resolved, however, podcast downloads are out of the question!

Thank you for checking, Tom,
I'm confused. What do YOU get when you push the feed button? And why is it working on yours and not either of my machines?
Today, my Mac (w/Safari 4) gets the same error message: Safari can’t open the page Safari can’t open the page “feed:http://vibrationalvoyages/vibrationalvoyages.com/DivineLight_Vibrations_Principles_andApplications/rss.xml”. The error is: “The feed could not be loaded because the content is not in a known feed format.”
My little ASUS (with a Linux operating system) gets a screen that says "The requested URL was not found". The URL on that page is http://vibrationalvoyages./vibrationalvoyages.com/DivineLight_Vibrations_Principles_andApplications/rss.xml
On both error messages, the URL I was checking was:
http://www.vibrationalvoyages.com/DivineLight_Vibrations_Principles_and_Applications/Divine_Light_Vibrations_Principles_ andApplications.html
The last URL was, of course, the URL generated by iWeb.
So, my question still is:
HOW CAN I GET MY FEEDS TO WORK PROPERLY? If the problem is there shouldn't be an http:// after feed: then, how do I get iWeb to set it up properly?
Any ideas?
GG

How do I get the RSS Feed to work when loading onto server other than .mac?

Does anyone have any knowledge of this? I am uploading a site created in iWeb on to a Media Temple which of course, disables many key functions in iWeb. One thing it supposedly doesn't disable though, is the RSS Feed, provided you input the proper URL when publishing the site. However, after nearly 20 tries with as many variations on the url as I could think of, nothing seems to work. Anyone have any insight? Many thanks in advance.

It takes two things...
1. Entering the correct base URL in the Publish to Folder window, and...
2. Uploading the correct files to your server
Number 1
When you select "Publish to Folder", there should be a little text field where you are asked to enter in a URL. What you need to enter here is the base URL for your site, and in most cases this is simply your domain name: http://www.yourdomain.com That's it. Nothing more. iWeb will then take this URL base and generate a functioning RSS feed URL.
Number2
When you select "Publish to Folder", you are asked to specify a folder INTO which iWeb will save the files necessary for the functioning of your site. You will need to upload only the CONTENTS of this specified folder, which includes only TWO items: an index.html file & your sitefolder. You must upload only these two items to your server WITHOUT the enclosing folder (the one you told iWeb to publish into.
If you satisfy the above two conditions (and only if you satisfy these two conditions), then you will end up with a functioning, automatically generated RSS feed from iWeb on your own server. There are other ways of achieving this endpoint (a functioning RSS feed), but this is the ONLY way to get iWeb to do all the work for you.

How can I include the article text/body in the RSS feed of the wiki updates section?

I recently migrated from Snow Leopard Server to Lion Server. Largely, because some people had trouble accessing via their PC under SLS.
Our primary tool is the wiki.
In Snow Leopard Server, we could generate an RSS feed for specific saved searches or recent changes/updates, adjust article length in the RSS feed, etc. Using a feed burner, like Feed My Inbox, we were able to have a daily digest "emailed" to a mailing list. Whereby, we'd get an email of any wiki articles that had changed, along with text from the body, so we can see the changes to the article in the email.
With Lion Server, the only RSS "feed" we can find appears to be on the Updates page. Which is fine. Are there others?
Second, the we can't seem to change the article "length" at all. All we see on the Updates feed is the title, change date, who made the change. We used to be able to see a few sentences of the article body/text for each article...not just the title, but some of the changes.
Of course, our feed burner, now only sends along the article title in the digest...no text beyond that.
We've used the built in push notification in Lion Server, but again, that sends a nice email saying Wiki Article Title "X" has been modified by User "Y" with the date/time stamp. You can click the link to read more, but no article /body is sent.
Is there a way to generate an RSS feed/link that shows not just the recent updated titles, but the first few lines of text in the article body itself in the index/summary?
I appear to be missing an easy way to generate RSS feeds, based on search criteria. And changing the article length in the sidebar, to max, never seems to show any of the wiki article.
How can I show a portion of the wiki article body/text underneath the title of the article in the RSS feed in Lion Server? Not just the article title and changed date?

About a month ago, I spend zillion hours to migrate from Eudora to Mail.
Eudora has been wonderful to me since Day 1 back in the early 90's. But, it has been discontinued as a commercial product. I had used the Japanese version of Eudora for several years, but it did not like communicating with Exchange at work.
I tried and tried various email clients before settling on Mail.
When I pictured interactions among my Mac, iPhone, and whatever email client I choose, Mail was just the simplest way. But, Mail is not Eudora. And, I dearly miss Eudora.
If there is no way to alter the contents of received email in Mail, I would have to adopt your approach on a case-by-case basis.
Thanks for your help, though.

I just wanted to know how to stop loading of rss feeds automatically ? In prior to FF 11 the rss feeds would display if there was no internet connection

I just wanted to know how to stop loading of rss feeds automatically ? In prior to FF 11 the rss feeds would display if there was no internet connection but now in newer version it would say live bookmark failed to load and doesn't display any feeds, in previous version it would atleast display feeds but in newer version it won't display anything:(

hello Nitin1234, the handling of live bookmarks was changed quite fundamentally starting in firefox 13 & upwards in order to improve the overall performance of the browser - now rss feeds won't get updated in the background anymore but will only be fetched when you're actively accessing them. this is probably leading to the unwanted side-effect that you're experiencing, unfortunately i don't know any way around that.
nevertheless please [[Update Firefox to the latest version|update firefox to the latest version]] (16.0.1 at the moment) to stay secure on the web, since there have been many [https://www.mozilla.org/security/known-vulnerabilities/firefox.html highly critical vulnerabilities fixed] since firefox 11/13!

How to get a snapshot of the first frame inside application.onPublish?

Hi there!
application.onPublish = function (client, p_stream)
//How to get a snapshot of the first frame and save it to a specified directory?
//Or post the snapshot image to a specified URI for restoring?
Anyone knows how to do this ?
Regards!

This can be accomplished 2 ways that i know of ffmpeg and PHP with the php way flash takes a snapshot of the videoframe and then sends it PHP to be saved as a jpeg....with the ffmpeg way you simply batch process the entire directory holding the flv wich is external to flash although this can also be automated using PHP........I can send you a package containing both methods but installation will be up to you.............unless you wanted to pay me to help. I'm busy and can't do probono work right now.

How you get album art

Hi all,
How you get album art for every song,i mean ,is there any software.

You could've read this post about 5 posts down:
/discussions/board/message?board.id=music&thread.id=9017
640K Should be enough for everybody
El_Loco Nokia Video Blog

HOW points get you privileges within the community

1. Create an account.
2. Receive welcome email: "Welcome to Apple Support Communities! ... "Participate: Check out the community by reading existing discussions and see what the latest buzz is about. Got answers? Post responses, enlighten the community, and earn points! See how points get you privileges within the community."
3. Go to link to see how points get you privileges.
4. Read what points are...
OK, so it explains how to get points and that they give you privileges, but no mention of how points get you privileges or link to that information. Not that I really care, but pointing it out. Is it just another "status" in our communities for people to feel good about [authoratative, look at me], or does it really provide something worthwhile relative to being helpful and providing Apple's support for them?

Refer to ... 'More like this', this page, right hand column, bottom entry ... 'What's the benefit of accruing points in Apple communities'
Carolyn Samit's excellent answer details all the levels and the justification for taking part in community discussions.
Personally, simply scouting around the different sections is an education in itself and I would heartily recommend you to take an interest.

How to get maximal value from the data/class for show in Map legend

I make WAD report that using Map Web Item.
I devide to four (4) classes for legend (Generate_Breaks).
I want to change default value for the class by javascript and for this,
I need to get maximal value from the class.
How to get maximal value from the data/class.
please give me solution for my problem.
Many Thx
Eddy Utomo

use this to get the following End_date
<?following-sibling::../END_DATE?>
Try this
<?for-each:/ROOT/ROW?>
==================
Current StartDate <?START_DATE?>
Current End Date <?END_DATE?>
Next Start Date <?following-sibling::ROW/END_DATE?>
Previous End Date <?preceding-sibling::ROW[1]/END_DATE?>
================
<?end for-each?>
o/p
==================
Current StartDate 01-01-1980
Current End Date 01-01-1988
Next Start Date 01-01-1990
Previous End Date
================
==================
Current StartDate 01-01-1988
Current End Date 01-01-1990
Next Start Date 01-01-2005
Previous End Date 01-01-1988
================
==================
Current StartDate 01-01-2000
Current End Date 01-01-2005
Next Start Date
Previous End Date 01

I deleted most visited, latest headlines, getting started, yahoo, youtube, apple in mozilla's folder,how to get it back like the first time i installed? thx

i deleted most visited, latest headlines, getting started, yahoo, youtube, apple in mozilla's folder,how to get it back like the first time i installed? thx

if you hid the menu bar and the navigation bar simply press the alt button, this will bring back the menu bar and form there you can right click and select which bars you want shown

How to get poster art in the RSS feed using Podcast Producer workflow

Similar Messages

Maybe you are looking for