How to get prefs to stick

For whatever reason, whenever I start up ID, the glyph palette is in the middle of the screen. I close it. Put my palettes where I want them. Save the file to the desk top. Reboot ID and there it is again and palettes all over the place. I know I'm having a brain freeze but how do you get changes to stick WITHOUT having to make a new workspace.
I should probably add that searching for 'preferences' returns 0 files when I do a search.

Try resetting the wokspace. But it also soounds like the current workspace XML file may be corrupt. You could try deleting any XML file in your workspaces folder that has the designation current included in its name.

Similar Messages

Qosmio X770-n404 How to get illumination to stick ON in Bios?

Just received a brand new Qosmio X770-n404 from toshiba last week
The lighted keyboard words fine when turn on
However when turned off, and illumination set in BIOS to on, it wont stay on after windows starts
I go back to Bios and it says illumination off
How can i get illumination to stick ON off in bios?
(im talking the illumintion option, not keyboard back light)

ok thats what i thought its supposed to do
so let me restate clearly, what my problem is:
first i go to bios, i sent illumination to ON
then of course i hit the SAVE option to store the settings
i exit and the laptop reboots
now, as soon as the laptop starts, the media buttons and the red strip above the mouse pad are illuminated
the laptop continues to boot, after i enter my password and the windows desktop begins to open, the lights cut off
The only way i can cut them back on at this point is to hit Fn-Z to either turn them ON, or turn them on with the timer(which is not exactly the same as JUST having the illumination on)
i reboot back into bios, the illimunation option is turned OFF
i turn it back on
wash - rinse - repeat.....
So im wondering if i have a software or hardware problem. When i set the illumination to ON , shouldnt it STAY on? and not go off once i enter windows?

Finally figured out how to get Faces to "stick"

I have a smart album of photos with no faces, and I could not get rid of 6 photos - tried deleting the faces, redoing them, but nothing would get iPhoto to "accept" the photo had no unassigned names.
I did the following:
1. Opened the offending photo
2. Went into "edit" mode
3. Reverted to the original (photo had been previously edited)
4. Went into "Info" mode
5. Lo and behold, there in a far corner and/or a part of the photo I had previously edited out, was an unassigned name.
6. Deleted this unassigned name
...Viola, the photo no longer had no name assigned. This fixed all 6 of my offending photos.
Don't know if this will help anyone else, but it did get rid of this frustrating problem for me.

Thanks for the GREAT information. However I did use the connection string provided by Carl Prothman at http://www.carlprothman.net/Default.aspx?tabid=87#OLEDBProviderForOracleFromOracle, because I couldn't get yours to work. I didn't need to download ODAC101040.exe because "OraOLEDB10.dll" is installed with the "Universal" version that supports Unicode, and is located in the bin directory. Again thanks.
Regards,
GW

I have a new MacAir and don't know how to get info from my USB stick and my SD photo card. Can anyone help me please?

I have a new MacBook Air and don't know how to get info from my USB stick and get info from my SD card. Can anyone help, please?

Plug the stick and/or card into the appropriate slots on the side of your Air. Do you see icons for the devices appear on the desktop? Click into them to see what files are there.
Matt

Enyone know how to get USB stick back to normal after creating a USB boot disk for Mavericks?

Enyone know how to get USB stick back to normal after creating a USB boot disk for Mavericks? https://discussions.apple.com/message/23527458#23527458

You should just be able to erase it using Disk Utiilty. I did with my 8Gb.
If not I have a USB deep format tool, but it only works with Windows: http://tinyurl.com/mwor6s9
You can download that and unzip it, then run it on a PC to fully erase and format the flash drive. Format it in FAT, and then the Mac will read and mount it so you cna once again format it with HFS extended for Mac use.

How to get Hibernate 3.2.5 running on OracleAS 10.1.3.1 / OC4J 10.1.3.2

Hi all,
I have installed the OracleAS 10.1.3.0 patched to OracleAS 10.1.3.1/OC4J 10.1.3.2.
I am trying to get Hibernate 3.2.5 with Hibernate EntityManager 3.3.1 running on the server, but I am not able to succeed.
I want to provide Hibernate as a shared lib, because I´ll have several applications using it. Actualyl I´ll have many EJB-JAR deployed, that will use Hibernate as the underlying implementation of EJB3.0/JPA specification.
I tried to copy the Hibernate JARs to home/applib directory and also register Hibernate as a shared lib through EM, but both failed when I deployed my application.
I am trying to deploy my EJB-JAR in two different manners:
1) Via EM, deploying the EJB-JAR file and checking Hibernate lib as dependency
2) Copying the EJB-JAR file into home/applications directory and add ejb-module tag to application.xml
Both fail.
How can get Hibernate for JPA running on OracleAS 10.1.3.1 / OC4J 10.1.3.2, in order to make it available for many differente application modules (ejb-jars) ?
Note: I prefer deploying EJB-JAR directly into home/applications in order the have the classes shared over for all application, so they can communicate to each other. Instead of deploying my ejb-jar within EARs and making each module isolated from each other.
Thanks

Check Debu's blog for this:
http://debupanda.blogspot.com/2007/01/using-hibernate-as-pluggable-ejb-3-jpa.html
--olaf

How to get your sound quality great in Vi

Guys,
Ive installed vista64 since i did a major upgrade along with my X-FI Gamer Fatality Soundcard, i always thought it dont sound great at all.
Ive just figured out why, in the sound options of the control panel where you can select the quality of sound always select 48hz studio quality dont go for the 96hz studio quality.
Do this in all the sound settings for each device and then tailor it to 5. or stereo which every you prefer, then goto the creative console and match it eg 5., stereo etc.
If needed test the channels and see how nice it sounds. as you will notice so long as you have a decent setup it will sound more fuller in apps and games.
I was using 96hz studio quality and always thought why it sounded so flat but as soon as i changed it to 48hz studio quality its sounding like i was using XP again, wmp sounds really good, full 5.ch and so are my games.
You can say now im totally satisfied with vista 64/32, sounds great and it plays all my games really well. Anyways i hope this helps all you out there, let us know how you get on.

RejZoR wrote:
You can get best sound with this plugin for WinAMP:
http://forums.winamp.com/showthread....readid=267586?
Thanks for that link! That plugin brings the sound back to very close to what I had with XP.

How to get the form reference in .js page from .jsp page

hi
i have written one form in jsp page omething like:-
<html:form action="/shopping" onsubmit="return false;">
can anybody tell me,how to get the form reference in .js page from .jsp page ,
i have tried:-
var formRef = document.forms[0];
butits not working.
Thanks.

Its very simple......y cant u prefer google...Bad
c this example...
function submit()
alert("textbox"+ document.forms[0].name.value);//to get textbox value in js
document.forms[0].submit();//to submit jsp page using js
<html:html>
<html:form action="/shopping" onsubmit="submit()">
<html:text property=name>
learn to search in google..
</html:form>
</html:html>

How to get the user piveliges in Solaris

Dear All,
In solaris how to get the user priveliges,
Example:lsuser -f "user name"
In AIX the above command will show the user priveliges,that user having su access or not like that,I want to know in Solaris,i gone through "ppriv" it not giving the valid information.
Kindly tell me how to get the user priveliges.
Regrads,
Venkatachalam.M

-K- (!),
I followed your suggestions and it works well now. Do you know why I prefer to see the UI in english ? Because the help and everything else (documentation) is in english making very difficult to find in the french UI what is referred to in the english on-line help.
Merci de votre aide !
Christian

Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player. Does anyone know how to get around this?

Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player. Does anyone know how to get around this? I don't know how to wipe the hard drive, and the support online doesn't seem to work.

As posted previously:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
If installing Leopard the process is similar in some respects. If you wish to begin anew then after selecting the target disk click on the Options button and select the Erase and Install option then click on the OK button. To install over an existing system do the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

How to get text when mousing over image?

Hey there, I am extremely new to Flash, but know other Adobe programs so tend to learn quickly.
I desperately need to find out how to get text to pop up when i mouse over PART of the image and i havent been able to find any help online in the last two days (pulling my hair out in stress).
Now i uploaded a rough mock up i did on Photoshop, so you can see when i mouseover the top layer of the cake i need a line to stretch out and the text to pop up at the end of it. Similarly if i moused over the cherry another piece of text needs to come up in the same manor.
Also since i need it to be a website link so what format do i open it with when i go to FILE- NEW?
Honestly thank you so much in advance to anyone that helps

First you have to choose if you want to handle devices. If not and you want to stay in Flash I'll stick on topic.
In the HTML version you could either use a good old fashioned image map (they're still fine in the HTML5 era) or you could use a layering technique (here's a random layering example).
In Flash you can do it a few different ways. If you intend on keeping the image intact as a single object then you'll be essentially doing the same as an image map. You can draw invisible hitareas on the various parts of the object and have those areas trigger a specific function that will display your text. If you break up the image into the separate parts then you can directly assign those parts to fire off a function themselves.
First I'd like to know your desired direction.

Apple Mail - how to get the first word in a sentence to auto-capitalize

How to get the first word in a sentence to auto-capitalize
Anwar

something to look forward to then, because we get used not to use our shift button any more, since iPhone and iPad do it for us. entourage and other ms stuff do it. pages does it too now (put it on in the auto-correct in preferences). bizarre however some loose the capitalization when you copy the text. pages to stickies or mail does not. that's good !

How to get the list of only installed bundled application on mac os X through programmatically???

how to get the list of only installed bundled software on mac os X through programmatically???

I think what you get is below;
App Store
Calculator
Calendar
Contacts
Dashboard
Dictionary
DVD Player
FaceTime
Font Book
Game Center
Image Capture
iTunes
Launchpad
Mail
Messages
Notes
Photo Booth
Preview
QuickTime Player
Reminders
Safari
Stickies
System Preferences
TextEdit
Time Machine
Twitter
Activity Monitor
AppleScript Editor
Audio MIDI Setup
Bluetooth File Exchange
Boot Camp Assistant
ColorSync Utility
Console
DigitalColor Meter
Disk Utility
Grab
Grapher
Keychain Access
Migration Assistant
Network Utility
RAID Utility
System Information
Terminal
VoiceOver Utility
X11
XQuartz
Note if you buy a new Mac with ML preinstalled the list may be larger.

How to get instance of Class with its type parameters

Hi,
Have any of you folks been dealing with generics long enough to show me how this should be written? Or point me to the answer (I have searched as well as I could).
I boiled down my situation to the included sample code, which is long only because of the inserted comments. And while boiling I accidentally came across a surprise solution (a bug?), but would obviously prefer a smoother solution.
My Questions (referred to in the code comments):
#1. Is there a way to get my parameterized type (classarg) without resorting to using the bogus (proto) object?
#2. Can anyone understand why the "C" and "D" attempts are different? (All I did was use an intermediate variable????) Is this a bug?
Thanks so much for any input.
/Mel
class GenericWeird
   /* a generic class -- just an example */
   static class CompoundObject<T1,T2>
      CompoundObject(T1 primaryObject, T2 secondaryObject)
   /* another generic class -- its main point is that its constr requires its type class */
   static class TypedThing<ValueType>
      TypedThing(Class<ValueType> valuetypeclass)
   // here I just try to create a couple of TypedThings
   public static void main(String[] args)
      // take it for granted that I need to instantiate these two objects:
      TypedThing<String>                        stringTypedThing = null;
      TypedThing<CompoundObject<String,String>> stringstringTypedThing = null;
      // To instantiate stringTypedThing is easy...
      stringTypedThing = new TypedThing<String>(String.class);
      // ...but to instantiate stringstringTypedThing is more difficult to call the constructor
      Class<CompoundObject<String,String>> classarg = null;
      // classarg has got to be declared to this type
      //    otherwise there will rightfully be compiler error about the constructor call below
      // This method body illustrates my questions
      classarg = exploringHowToGetTheArg();
      // the constructor call
      stringstringTypedThing = new TypedThing<CompoundObject<String,String>>(classarg);
   } // end main method
   // try compiling this method with only one of A,B,C,D sections uncommented at a time
   private static Class<CompoundObject<String,String>> exploringHowToGetTheArg()
      Class<CompoundObject<String,String>> classarg = null;
      /* Exhibit A: */
////     classarg = CompoundObject.class;
         results in compiler error "incompatible types"
         found   : java.lang.Class<GenericWeird.CompoundObject>
         required: java.lang.Class<GenericWeird.CompoundObject<java.lang.String,java.lang.String>>
               classarg = CompoundObject.class;
                                        ^
         I understand this. But how to get the type information?
      /* It's obnoxious, but it looks like I will have to construct a temporary
          prototype instance of type
             CompoundObject<String,String>
          in order to get an instance of
             Class<CompoundObject<String,String>>
          (see my Question #1) */
      CompoundObject<String,String> proto = new CompoundObject<String,String>("foo", "fum");
      /* Exhibit B: */
////     classarg = proto.getClass();
         results in compiler error: "incompatible types"
         found   : java.lang.Class<capture of ? extends GenericWeird.CompoundObject>
         required: java.lang.Class<GenericWeird.CompoundObject<java.lang.String,java.lang.String>>
               classarg = proto.getClass();
                                        ^
      /* Exhibit C: */
////     classarg = proto.getClass().asSubclass(proto.getClass());
         results in compiler error: "incompatible types"
         found   : java.lang.Class<capture of ? extends capture of ? extends GenericWeird.CompoundObject>
         required: java.lang.Class<GenericWeird.CompoundObject<java.lang.String,java.lang.String>>
               classarg = proto.getClass().asSubclass(proto.getClass());
                                                     ^
      /* Exhibit D: (notice the similarity to C!): */
////     Class tmp1 = proto.getClass();
////     classarg = tmp1.asSubclass(tmp1);
      /* It compiles (see my Question #2) */
      return classarg;
   } // end method exploringHowToGetTheArg()
} // end class GenericWeird

Thanks so much, Bruce. (Oh my goodness, how would I have ever come up with that on my own?)
So in summary
This doesn't compile:
      classarg = (Class<CompoundObject<String,String>>)CompoundObject.class;but these do compile:
      classarg = (Class<CompoundObject<String,String>>)(Class)CompoundObject.class;or
      Class coclass = (Class)CompoundObject.class;
      classarg = (Class<CompoundObject<String,String>>)coclass;And this doesn't compile:
       classarg = proto.getClass().asSubclass(proto.getClass());but this does:
       Class tmp1 = proto.getClass();
       classarg = tmp1.asSubclass(tmp1);

How to get satisfaction from Verizon.

By now a few of you, very few actually have figured it out how to get from Verizon what you felt was satisfactory. In some cases like mine my wife and I exchanged our defective new Fascinates for brand new working Fascinates. Some of you prefer a different phone altogether and a tiny minority have been successful although based on what I have read you were given a used different phone. I am going to try to put together a do's and dont's that might help you wind up with a product that you may be happy with.
Do:
I recommend starting with the person that sold you the phone and 2 year extension, he took your money and got a commission, make him work for it.
Remember the only thing that matters is your phone will not receive phone calls and text messages, this is the most important function a phone must fulfill, it is worthless if it cannot reliably perform this basic task.
Be polite but firm, do not back down. You will be lied to in a variety of ways some unintentional some quite on purpose.
Always get the name of who you are dealing with and at the first no; escalate to the person they answer to, remember they will lie and tell you a supervisor is not available, this is a lie 98% of the time.
Don't:
Try to resolve your problem on a Sunday.
There is no written policy on how any rep. will help you, so whatever you say ok to is all you will get.
Expect a phone number given here from someone that is satisfied will work for you, It will not, it is not the number that get's it done is what you say and how you say it.
Waste your time with the first person that answers the phone, they do not have the authority to really give you what you want.
Ok in conclusion keep this in mind, the reset's and the *228 don't fix anything you are wasting your time. If you have a phone that fails to receive calls the only thing that will fix it is a phone that works. Also if you are not good with words, you are passive or too nice, don't make the call yourself find a spouse, significant other or a good friend that you know can talk and verbally fight and won't back down.
Good Luck friends.

Certainly the LG Voyager supports syncing contacts with a supported address book app on your computer?
With Wimdoze, the iPhone supports syncing contacts with Outlook 2003, 2007, or 2010 along with syncing calendar events and notes or with the address book app used by Outlook Express or Windows Mail called Windows Contacts for syncing contacts only, and with the Address Book on a Mac.
You need to get the contacts from the Voyager into a supported address book on your computer - the contacts should already be available on your computer someplace. Not a good idea to depend on a cell phone alone for contacts, which can be lost or stolen or damaged by accident.

How to get prefs to stick

Similar Messages

Maybe you are looking for