How to get printer to work on Yosemite beta

just downloaded the Yosemite beta but now my printer software doesn't work and I am not able to print or even scan from my computers.....any suggestions?
I'm using an OfficeJet Pro 8600 all-in-one printer

Similar Messages

How to get Google Gmail working in Yosemite? (not just in Mail)

How to get Google Gmail working in Yosemite? Mail is working. Gmail is coming to Mail. I want to use gmail in Google on the web as I have in the past.

MrAtheist wrote:
It's even an irony that this forum doesnt work on safari at all. All the buttons are just ... buttons. Nothing works when you click on it (i.e. filtering, tagging, etc).
Even more ironic is the fact that I use nothing but Safari, and it works correctly in Gmail, as well as on this site.

How to get Photoshop CS4 working with Yosemite

After downloading Yosemite 10.9.5 on my Mac I can no longer access Photoshop CS4. I get a 150:30 error?

This strategy solved about 1/2 of my problems and I was really surprised! I had a website I created in Homepage with 100+ photos of my artwork. I had linked a new iWeb site I did to the old site a couple of years ago when I learned Homepage would no longer be supported and it worked fine until the last few months when none of the old photos would load. This has helped load some links but not all and maybe only the thumbnails and not the larger photos. One odd thing...when I loaded idisk, the web folder didn't seem to work so I created a new one with a sites and pictures as instructed...have no idea where it is ...or where my site is stored... Help!

Can't get Canon iR-ADV C5250 printer to work on Yosemite

Can't get Canon iR-ADV C5250 printer to work on Yosemite; keep getting "printer is not responding."
I did try and install the driver for Mavericks first. I *have* deleted printer and appropriate /Library files. And re-installed using "UFRII_v10.06.00_Mac.dmg" which is the equivalent of what worked on the previous Macbook Air.
We do use Dept. ID Management. I know how to set that up. Although we do not use a PIN. Again in other macs and computers that's not an issue.
PAHU? :-)
Thanks!
David

Hi David,
Sorry for the late reply. Printer not responding is typically an issue with the protocol or the wrong network address. Easiest way to check that the correct IP address has been used is to enter the IPv4 address into a web browser on the Mac. This should result in you connecting to the internal web page of the C5250. If this does happen, then you know the IP address used to create the printer was correct.
As for the protocol, the UFR2 driver supports LPD and HP Jetdirect-Socket. It does not support IPP. And there have been some users who have found even the LPD protocol will not communicate with the printer, so check that you are using HP Jetdirect-Socket. If you cannot remember what protocol was used when creating the queue, then you can open System Information (Applications > Utilities) and then select Printers in the left column. If you have more than one printer on this Mac, the top right pane will list them. Select the C5250 to see its information in the bottom right pane. Then look for the entry of URI. This is the print queue. It should show socket://ip-address, indicating the HP Jetdirect-Socket was used. If it shows lpd or ipp then you know one of the other protocols was used.
Hope this helps. Reply if you need more assistance.
PaHu

I have purchased itunes match but the cloud will not load on my ipad 4.the only music that will show up is stuff that i bought from the itunes store.any ideas on how to get this to work?

i have purchased itunes match but the cloud will not load on my ipad 4.it works on my iphone 5 & it originally worked on my ipad.the only music that will show up is stuff that i bought from the itunes store.any ideas on how to get this to work?

On the MBP, in iTunes, switch to Song view and enable the iCloud Status column by pulling down View > View options and selecting the option for "iCloud Status." Close the small window. Look for any tracks that have a status of "waiting." If you see several of them disable iTunes Match while holding down the Option key. Quit iTunes, wait a few seconds, then open it again and turn iTM back on. Let it compelete the scan. Wait until all tracks that are "waiting" have a status of either "matched" or "uploaded."
On the iPad, turn off iTunes Match then launch the Music app and let the contents clear out. Power cycle the iPad for good measure, then re-enable the service once all the tracks in iTunes have been processed.

When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly. Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal. In mixed mode it works fine. Any ideas on how to get 5.0 working?

When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly. Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal. In mixed mode it works fine both placed. Any ideas on how to get 5.0 working? I thought 5.0Ghz was supposed to have a wider range. Do I need to change a setting on the Macbook Pro?
Thanks, W

I'm not sure if you understand that 5 GHz has some upsides, but also some very significant downsides.
The upside is that the 5 GHz signal will allow faster speeds.
The downside is that you must always give up something in order to gain something else.Unfortunately, the marketing hype about 5 GHz does not go into very many details about this.
In the case of 5 GHz, the 5 GHz signals are much weaker than 2.4 GHz signals, so they do not travel as far or penetrate any obstructions like walls or ceilings nearly as well as 2.4 GHz signals. In many cases, in order to get good 5 Ghz performance, you literally have to have almost a line-of-sight relationship between your computer and the wireless router.
If you have a new dual band router, which broadcasts both a 2.4 GHz and 5 GHz signal simutaneously, your Mac will connect to the best signal quality automatically depending on its location in relation to the router. In the same room, without any obstructions, it will connec to 5 GHz. But, take the laptop down the hall a few rooms and around the corner and the Mac will connect to the 2.4 GHz signal because at that location, the 2.4 GHz signal is not only stronger, it is also faster.

ITunes wont open for me. it keeps saying "the Disc "untitled playlist" cannot be read. An unknown error occurred (-69)." don't know how to get it to work. Please help

iTunes wont open for me. it keeps saying "the Disc "untitled playlist" cannot be read. An unknown error occurred (-69)." don't know how to get it to work. Please help

It is likely a hardware failure
http://support.apple.com/kb/TS3694?viewlocale=en_US#error1

YES! How to make PRINT QUOTAS WORK with 10.4

How to make PRINT QUOTAS WORK in 10.4
After struggling for quite some time, I finally found a pretty simple way to make print quotas work.
First, I’ll tell you our setup. We have 3 different computer centers with a variety of eMacs and new Intel iMacs, all clients are running 10.4.8, and each of those 3 centers has its own HP Laserjet 4200 printer. Our dual G5 server is running Server v.10.4.8. Client computers and printers have static IP addresses. All clients are bound to the server with the standard WorkGroup Manager/ LDAPv3 Directory Access scheme - such that all students login to the clients with their network username/password to mount their home directory on the client.
Next, I’ll tell you what does not work. IF YOU WANT PRINT QUOTAS TO WORK, you cannot use Workgroup Manager to assign a printer to any managed user account, user group, or computer group. Why? Because when you go to a client, and Show Info on the printer that is being pushed by Workgroup Manager, you’ll see that the queue name is not the queue that you’ve setup in Server Admin. Instead, you’ll see the queue name is “MCX” or something along those lines. Even if you manually edit the Workgroup print preference file that is being pushed to clients, it still will not work.
Drawbacks of my technique: In my case, students will see all 3 printers (1 from each lab) available to them no matter which lab they are in. Not the best, but for now I think it’ll be worth it to be able to control wasteful printing. Students may be able to move/delete the preference file (see below), but they’ll only be hurting themselves, as they won’t have any printers at all then.
Okay, here’s how I did it:
1. If you have setup any printers to be pushed out via Workgroup Manager’s preference enforcement to individual users, usergroups, or computer groups, turn those preferences off and leave them off.
2. Delete any existing printers in your Printer Setup Utility and/or Server Admin. Add and setup a new printer queue using the Server Admin> Print service. I added the printer through the Server Admin application, not Printer Setup Utility (may not matter). However, I did go into that latter utility to set the model of the printer. Now, back in Server Admin, edit the printer queue to turn on these services IPP, LPR (bonjour off), and of course check off the enforce quotas box. (No student Windows clients, so I didn’t tinker with SMB print service). I went ahead and specified the standard cover sheet – it will be handy while troubleshooting.
3. In Workgroup Manager, select the users that you want to enforce quotas upon, go to the Printer Quota tab (not the preference pane) and, in my case, I selected All Queues and specified a quota, and clicked Save.
4. Delete all printers that appear in the Printer Setup Utility from each client computer (I know, UGH).
5. For all network users, you need to edit a preference file and put it into each user’s home directory. That file is “com.apple.print.favorites.plist” and as you guessed, it needs to go into the Library> Preferences folder of every one of your network users’ home directories. Now, the content of that file is crucial… what it should show is the name of the queue(s) you created in Server Admin above, and be immediately followed by an “@” and the address of the server that is hosting that queue. For example, my queue’s name is TCStudentQ and the server’s address is student.mydomain.org… so my preference file has this entry: [email protected]. If you have more than one queue, you’ll have more entries. Be sure that the network user has at least Read level access under Group or Others. I’d recommend making the server System account the Owner of the file, and be sure to lock the file so the users can’t easily trash it. If you don’t know how to create this file in the first place, what you can do is go to a client computer, and log into the client with a dummy network account. Then open Printer Setup Utility, and you should see the queue you created in step 2. Add that printer, and then the file will be created in your dummy account’s home directory under Library> Preferences. Now you can use that file to distribute to other user’s folders… but don’t forget that each user needs Read level access.
6. That’s it. Works for me. When they exceed the quota, all that spits out is the cover page. It’d be nice if there was a quota monitor utility on the client side so users can see how many pages they have remaining and when the quota will automatically reset. I plan to start the quota on a Monday morning and go on a weekly duration. Not sure what a good starting point is… perhaps 25 pages every school week.
7. Hey Apple Computer, Inc. Server Developers & Project Managers, I truly hope you’re reading this and can explain why print quotas don’t function as you have documented and advertised. I don’t mean to toot my own horn, but I’ve spent way too much time discovering this workaround, and I know it will help thousands of others with the same problem. I can see where your Print Quota system breaks down, and I think you need to fix these issues or at least document them. Don’t forget to fix serious 10.4 Server bugs before leaving it behind for 10.5 Server – many of us will continue using 10.4 Server for at least another year or two.

David,
Your assumption that I didn't read the documentation is incorrect. I read that 10.4 documentation over and over - followed it to the letter to no avail. Perhaps it was updated in the last few weeks? So, do you have a fully operable printer quota system in conjunction with a managed computer or user group that has a managed printer pushed to the group via Workgroup Manager? I can push a managed printer to a managed group without a problem, but the quotas won't be enforced unless I use the workaround above and cut Workgroup Manager's managed/pushed printer out of the picture.
I know this is a user-to-user forum - however, I'm also aware that Apple tech support often chime in here, so it doesn't hurt to post a message to them in the context of a larger posting about a 'known issue'. I have used the server feedback form... hasn't seemed to me to be very helpful in the past.

Has anyone figured out how to get speech recognition working with sticky keys enabled on mountain lion?

I'm trying to use speech recognition to input text on my iMac running the latest mountain lion, 10.8.3.
I have sticky keys enabled.
When I try to start speaking by pressing the function key twice nothing happens. I can only get it to work if I disable sticky keys.
The same problem occurs with all the other modifier keys as shortcut, they do not work with sticky keys.
When I try to select a different shortcut, I am unable to select a two key combination, but am limited to one.
If I select the F6 key, or any other single key, I am able to start speech recognition. However the second time that I press the key, it does not stop recognition and process my words. Instead, it restarts the recognition.
Has anyone figured out how to get speech recognition working with sticky keys enabled?
Or a way to get an individual key shortcut to start on the first press and process it on the second?
Or a way to get key combinations to work, as specified by the help:
Dictation On and Off
To use Dictation, click On.
When you’re ready to dictate text, place the insertion point where you want the dictated text to appear and press the Fn (function) key twice. When you see the lighted microphone icon and hear a beep, the microphone is ready for you to speak your text.
Shortcut
By default, you press the Fn (Function) key twice to start dictation. If you like, you can choose a different shortcut from the menu.
To create a shortcut that’s not in the list, choose Customize, and then press the keys you want to use. You can press two or more keys to create your shortcut.

I noticed with version 10.8.4 of OS X that I am now able to select F6 to activate, and the return key to complete the speech recognition. This is still different than the description of how these should function that's included in the help, but at least it's an improvement.

I just got the iphone 4s and i cant figure out how to get siri to work it seems to be the old voice command. HELP!

i just got the iphone 4s and i cant figure out how to get siri to work it seems to be the old voice command. HELP!

Did you enable Siri in settings?
Settings > General > Siri > ON
If Siri is off, all you get when pressing the home button for 1 second is the old Voice Control.

Facebook like button is not working, I have used the muse widget and created code from facebook. Does anyone know how to get this to work?

Facebook like button is not working, I have used the muse widget and created code from facebook. Does anyone know how to get this to work?

Hi connally25,
Below is a link to a video tutorial on how to add a Facebook Log button, please check if you have followed the same steps to add the video.
http://tv.adobe.com/watch/learn-adobe-muse-cc/adding-a-facebook-like-button/
If you have followed the steps correctly and the button still does not work; here is a link to a forum thread which might help solving the issue:
Facebook Follow Widget not working
Regards
Sonam

I have updated to OS X 10.9 and now can't open Aperture, message reads You can't use this version of the application "Aperture" with this version of OS X. You have "Aperture" 3.2.3... all i need to know is how to get Aperture to work again..help !

I have just updated to OS X 10.9 and now find that I can't open Aperture to access photos etc, message reads : You can't use this version of the application "Aperture" with this version of OS X. You have "Aperture" 3.2.3... whichj is not a lot of help, i have limited technical ability and all i need to know is how to get Aperture to work again...help !

Software Update?

I have a 4s iPhone which I loaded the new Os on last night. Now I can not connect to iTunes. A message comes up saying i need 10.6.3 or later but I am running 10.6.1 as I have an older Mac. Anyone have ideas how to get this to work?

I have a 4s iPhone which I loaded the new Os on last night. Now I can not connect to iTunes. A message comes up saying i need 10.6.3 or later but I am running 10.6.1 as I have an older Mac. Anyone have ideas how to get this to work?

Its not telling you to update your iPad, its telling you you need to download a recent version itunes on your computer.
Go here to download the newest version of iTunes.
http://www.apple.com/itunes/?cid=OAS-US-DOMAINS-itunes.com

How to get printer IPAddress using java code

Hi all,
Can some one suggest in java
1) how to get printer IPaddress
2) send a printer job to a particular printer either by using printer name or by printer IPaddress ?

Hi all,
Can some one suggest in java
1) how to get printer IPaddress
2) send a printer job to a particular printer either by using printer name or by printer IPaddress ?

How to get WLAN card working on Tecra M1?

I just bought a Tecra M1, 2nd Hand. Great! There is XP installed but no Toshiba tools. I can't manage to get access to my WLAN router. Seems as if the WLAN connection isn't installed yet. As I know from my Satellite Pro M30, there are Toshiba tools for that, they work smart.
Maybe I would need the drivers - WXP finds unknown hardware during start up - could be the WLAN device - who knows.
When I check the network connections, I find 1934 and LAN adapter, but no WLAN device. I already ran the XP assistant for WLAN connections, entered SSID and hex Key; but no WLAN device shows up.
So, has anybody an idea how to get the WLAN working?
Is there a possibility to get the M1 Toshiba Software or can I use my SatPro Software?
Thanks so far Jan

My question seems to be difficult... No reply at all
But keeping on searching I found some links to other Toshiba sites
There I found the required drivers for the WLAN
Once the driver is installed, the WLAN device was proper configurable.
The second hardware device that was found and specified as unknown, was the IR Device. I took a driver from my SatPro CD. All fine so far.
By that way: I couldnt find the utilities for download, but I tries to uses the SatPro CD - that works
Hoping that my experiences will help somebody else I mark my question as being answered.
So far Jan

How to get printer to work on Yosemite beta

Similar Messages

Maybe you are looking for