How to get project into timeline

I am making a movie of pictures.  I have all of the picture organized in the project area.  Now I need to bring them down into the timeline so I can add transistions and music.  I just can't figure out how to move the pictures there.  I would appreciate some help.  Thank you

If your pictures are in the upper left they're in the project browser, which is the timeline, and your window will look something like this:
You are not in project library. The button in the upper left is a button that takes you to the project library where all your projects are kept.
The Events Library only holds video, so if your project only has stills it may well be empty.
You may be confused because the window arrangement can be swapped so that the project browser, the timeline, is at the bottom:
You can do that if you wish but you don't have to. You can add any transitions or music or whatever to the project browser either when it's in the upper portion of the screen or when it's in the lower portion of the screen.

Similar Messages

  • How to get text into a timeline

    I do not understand how to get text into a timeline in Premiere Pro.  I can work in titles more or less, change fonts and sizes, but I do not get how to insert the text into the timeline.  Am I even starting at the right place, going into "titles" first?

    Once you have made your title, drag it from the project panel to V2 on your timeline above your other footage.

  • How to get audio into Adobe Premiere Elements 12?

    How to get audio into Adobe Premiere Elements 12?
    I have filmed an air show with a very good camera JVC pro
    And when I pick up the clips in Adobe Premiere Elements 12, it works too, but only without sound.
    I think I tried everything for 4 days now.
    Sound in my computer works perfectly
    I go to where the video files are located and try to run them in VLC or in Nero Kwik so it works fine with both audio and video.
    I have checked the sound card.
    Yes, I have tried everything so now I'm so tired of this lousy so I'm ready to throw this program at the dump.
    It's not normal if you will keep on producing audio for over 4 days at Adobe
    The old Elements 9 worked fine. Offer some of would consider developing it again. I do not know how I should do.
    My name is Thore Hult
    live in Karlshamn in Sweden

    Thore Hult
    On what computer operating system is your Premiere Elements 12 working on? Have you updated it from 12 to 12.1 Update using an opened project's Help Menu/Update. If not, please do so.
    For your immediate problem.
    What is the model/settings for the JVC camera that recorded you video. I want to get at the properties of your source video including the file extension.
    Since you are getting video, but no audio, please download and install the free codec utility named GSpot to see what is shows
    for your Audio Name and Status.
    http://www.headbands.com/gspot/
    The other properties of the file there would also be of interest.
    When you import your source file into the project, do you see any "conforming" activity going in a progress bar at the bottom right corner of the workspace?
    If so, do you wait for it to complete before you move forward in the project?
    Can you get sound in any of your Premiere Elements projects with this current JVC file or other?
    Can we assume that your troubleshooting has included checking
    a. Volume control within the project
    b. Edit Menu/Preferences/Audio Hardware ASIO
    Let us start here and then we can decide what next if necessary.
    Thanks.
    ATR

  • I'm trying to make a holiday card, but can't figure out how to get photos into the card.

    I'm trying to make a holiday card, but can't figure out how to get photos into the card.

    Selectto( s) and create the card - if you want to add more photos ot it drag then to the card project in the source pane on the left
    LN

  • I have Maveriks. I downloaded numerous ACID Fonts and purchased Stuffit as instructed by ACID Fonts in order to use them. However, now I am unable to figure out how to get them into my Font Family drop down list or insert into Pages. PLS HELP!

    I have Maveriks. I downloaded numerous ACID Fonts and purchased Stuffit as instructed by ACID Fonts in order to use them. However, now I am unable to figure out how to get them into my Font Family drop down list or insert into Pages. PLS HELP!

    Hi FancyJean!
    Here is an article for you about using Font Book and installing fonts that you have downloaded:
    Mac Basics: Font Book
    http://support.apple.com/kb/ht2509
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • Anyone know how to get subtitles into Quicktime movies?

    With Quicktime now supporting subtitles. Does anyone know how import subtitles into Quicktime movies?
    After following the instructions from Apple's support pages for timed text, I tried pasting in timed text. This displays text below the video in an ugly black bar, but isn't recognised as subtitles by Quicktime. Ideally, I'd like to convert srt files into a compliant format, but without knowing the correct format, it's a little difficult.

    There haven't been any really clear instructions on how to get subtitles into QuickTime movies yet. Apple has posted a QuickTime component that will convert an SCC file into QuickTime and you'll find that here.
    http://developer.apple.com/samplecode/ClosedCaptionImporter/index.html
    Also, a discussions user has posted instructions on how to CC a QuickTime movie in this thread.
    http://discussions.apple.com/thread.jspa?messageID=5756610&#5756610
    And here's another thread you may find helpful links in.
    http://discussions.apple.com/thread.jspa?messageID=5720947&#5720947

  • How to get project GUID from project name?

    How to get project GUID from project name in Campaign mgmt ?

    hello,
    have a look in table CGPL_PROJECT.
    regards,
    Frédéric

  • How to get tabs into a column on left edge of Firefox window?

    How to get tabs into a column on left edge of Firefox window?
    I've looked extensively for the answer but haven't found it yet.

    I found the Tree Style Tab ad-on does this.
    Mike

  • SQL query - how to get parameters into a function within a SELECT statement

    Hi,
    I have SQL query roughly as follows
    SELECT A, B, C, MAX(CASE...) AS "D_NAME", FunctionX(B, C, "D_NAME")
    FROM...
    WHERE...
    How to get alias "D_NAME" as a valid parameter into FunctionX?

    Hi,
    user8819407 wrote:
    Hi,
    I have SQL query roughly as follows
    SELECT A, B, C, MAX(CASE...) AS "D_NAME", FunctionX(B, C, "D_NAME")
    FROM...
    WHERE...
    How to get alias "D_NAME" as a valid parameter into FunctionX?Either
    (1) repeat the calculation or
    (2) compute it in a sub-query
    Here's an example of (2)
    WITH  got_d_name  AS
        SELECT A, B, C, MAX(CASE...) AS "D_NAME"
        FROM...
        WHERE...
    SELECT  A, B, C, D_NAME, FunctionX (B, C, D_NAME)
    FROM    got_d_name
    ;A column alias (like d_name) can be referenced in the ORDER BY clause of the query where it was defined, but that's the only place in that query where it can be referenced.

  • How to get data into BI system

    Hi Experts,
             I am a newbie to SAP BI. Please guide me how to get the data from tha R/3 tables into BI system tables. When I check the data in SE11 in R/3 (for ex: VBAK, VBAP...... etc), I could see all the records. Now how can I get the same data in BI system tables? When I check in BI system with Tcode SE11, I couldn't find any data for the tables VBAK,VBAP..... etc. Please guide me how to fill these tables in BI from R/3. Points will be rewarded for the solutions.
    Regards,
    Ravi

    Hi Ravi,
        U can follow the link and know how to get data from R/3 to BI.
    <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/28/4c553c42360a40e10000000a114084/frameset.htm">data sources</a>
       Still I give overview to u. U need to create data source in R/3 side, replicate them in BI and use them in your info source to load the data. Data source are of two type application specific (system generated) and generic (customer defined). Data Extraction can be based on table, view or infoset query.
    hope this helps.
    Regards,
    Purvang
    Assigning Point is to say Thanks in SDN *

  • TS3697 how to get photos into itunes

    New to itunes want to know how you get photos from pc into itunes. step by step would be appreciated. ta

    You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
    Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
    Apple - iPad - Guided Tours
    http://www.apple.com/ipad/videos/
    Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
    How to - Articles & User Guides & Tutorials
    http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
    iPad How-Tos  http://ipod.about.com/lr/ipad_how-tos/903396/1/
    You can download this guide to your iPad.
    iPad User Guide for iOS 5
    http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
     Cheers, Tom

  • How to get documents into adobe reader iphone

    hi all -- new to my iphone -- i want to read pdfs using the adobe reader -- how do i get pdfs loaded into ???? so the phone can download it

    hazardzzz,
    Please take a look at the following FAQ document to see if it helps you get started with Adobe Reader on your iPhone.
    How to get PDF documents into Adobe Reader for iOS (iPhone on iOS 7 version)

  • Windows XP User:  I Don't Understand How To Get Photos Into iTunes

    So I have hundreds of photos living in Picasa on my XP PC. How can I get them into iTunes (or anywhere for that matter) in a manner that they can be viewed via Apple TV?
    I own Adobe Photoshop and ImageReady; are those potential solutions?
    Help.
    TIA

    Hello BillyGoat
    You can sync Photos to Apple TV from windows, knowledge base article 305139 (http://docs.info.apple.com/article.html?artnum=305139) describes how to to it.
    Cheers,
    John
      Mac OS X (10.4.9)  

  • Getting Projects into RH Server

    Hi All
    I'm evaluating RoboHelp, and RoboHelp Server. Currently all
    our docs are in Word format and we want to produce on line web
    help. I've made a test project, generated WebHelpPro, Word and PDF
    Docs, but can't for the life of me get the project to appear in
    Robohelp
    My RH Server projects are stored in the default path:
    "C:\Program Files\Adobe\RoboHelp Server 6.0\Servers\1\Projects\"
    (seems really dumb that I can't locate my data outside the program
    directory when I install the project--I mean, who the heck stores
    data in the prgram directory--but I'll cross this bridge later).
    When I publish the web help pro file, I get the edit
    destination dialog, and no matter what I enter ti doesn't work.
    I've no idea what server name I'm supposed to be entering: my
    physical server anme, odbc source name (I'm using SQL server 2005),
    my SQL server instance name. I either get connection failed or it
    sits there forever "copying files" (actually just displaying a
    progress indicator (I have 5 pages in my test project).
    Does anyone have any idea how to get RH Server and RH HTML
    working together?
    Thanks in advance
    Mark

    Sorry you folks are having a problem. I am not a "real" web
    administrator, but I have set up RoboEngine and RoboHelp Server for
    many years. It can definitely be a hassle setting it up for the
    first time. This was especially true for me, since I am
    self-taught. I'll try to pass along a few things I have learned.
    I'll address what I know. First to Mark's question:
    I know it may sound strange, but there is a very good reason
    why the "real" content is published to a folder under Program
    Files. Most Windows IIS administrators routinely create "virtual"
    folders for all their web sites in general (having nothing to do
    with RoboHelp Server). This is considered a best practice for
    Windows security reasons. So, the server path you mention is one
    such virtual folder.
    As for your physical server name, this would be either a
    domain name (mycompany.com) or an IP address that is listed among
    the available domains on your web server. (It occurs to me that you
    may be trying to test this on your local computer and not a
    dedicated web server. If that is the case, you would normally just
    put in the name of your computer or
    http://localhost )
    I think the reason the server is "waiting" is because it
    cannot find the destination or for some reason the permission is
    not set correctly.
    I realize you may have already done this, but regarding the
    ODBC issue, you would first create an empty database in SQL Server,
    create a System DSN and then point to that database in
    Configuration Manager (You must open Configuration Manager on the
    Web Server itself. You cannot access this from the RoboHelp
    authoring application).
    Lavonna, invariably these issues revolve around "Windows NTFS
    Permissions" that must be carefully set up beforehand. I'm sure
    that's what tech support was referring to. You may already have
    seen them, but I am posting these links below. The last one is
    especially important.
    Adobe
    RoboHelp Server 6 - Getting Started
    An
    article I wrote for the Adobe Developer Network on RoboHelp Server
    6
    Permissions
    required for RoboHelp Server 6
    Finally, while I realize this doesn't help you now, there is
    better news ahead. I found out at the STC Conference in Minneapolis
    during a "sneak peek" of the new Adobe RoboHelp 7 that installation
    and configuration will be much easier.
    Thanx, and sorry if I didn't solve your problem. Perhaps
    someone else can chime in.
    John

  • How to get music into itunes

    Ok. I buy a song NOT from itunes and have it on my computer. I have it in the "my music" folder - how do I get it into itunes easily?
    Thanks!

    Open itunes, click "Help".
    Type "importing music" into the search bar.
    It should tell you how to import music already on your computer.

Maybe you are looking for