How to get Quicktime to always open full screen?

If I click a video file I want to watch it. So I have a script to get it to play straight away, but how do I get quicktime to go full screen when a video file is loaded?

Command-f after the file has opened.
Use QuickTime Player Pro to set the movie "Presentation" properties to have the file open at full screen at launch.

Similar Messages

How can I get Top Sites to open full screen?

How can I get Top Sites to open full screen?

http://support.apple.com/kb/PH11881
System Preferences > General
Uncheck the box beside "Close windows when quitting an application".

Since upgrade to 3.6.7 the emoticons window on a forum I use always opens full screen, not as a small window. How can I get it to open as a small screen again.

Since upgrading to 3.6.7, when I go to a forum I'm active on and click the emoticons icon in the reply box, the emoticons window opens full screen, and not as a small screen like it did before. I can click on the box to make it small again, but next time I open it, it's back to full screen. Ok, not a major problem, but really rather annoying. I've tried to find a way to get it back to opening the way it did before, but to no avail. Does anyone know how I can solve this little problem?
== I upgraded to 3.6.7

No-one got any ideas on this then? It's definitely a firefox problem, as when I open the forum page (mentioned in the OP) with Opera or Chrome, the emoticons window opens as a small window, same as FF used to before the upgrade.

Cant get quicktime to always open media files

I'm a very new Mac OS user so forgive me if this has been answered elsewhere or I'm just dumb and don't know what I'm doing.
I'm trying to get some media files (WAV for example) to always open with QuickTime instead of iTunes. When I do Open With, Other, and select QuickTime and check Always Open With, it only changes that files association, not every WAV file.
When I right click and do Get Info, the Change All button never un-grays. As before, I can only change the association of that one file.
The QuickTime panel is set properly but I believe that only refers to the plugin. I've looked thru iTunes but can only find a button to make it the default player, not a way to un-make it the default.
Any suggestions??
Zach

Hello Zach:
Rather than me put you through hoops, I suggest you post in the Quicktime forum:
http://discussions.apple.com/category.jspa?categoryID=122
There are people there that are expert (I am not one) with the QT application.
Barry
P.S. There are no dumb questions, but many dumb answers.

How can I force Firefox to open a new window (tab) a certain size. I need a smaller box but it always opens full screen.

I get tired of having to click on the upper right box every time I need the smaller window, which is VERY frequently. I teach college online and need to see only a portion of the large screen as the rest may distract me while grading. This COULD prove unfair to my students.

Don't know if this is the answer you want, but it gives you an idea of what you can do.
* Using the window.open method<br>http://www.javascript-coder.com/window-popup/javascript-window-open.phtml
You can resize an existing window with a bookmarklet, but you would have to be able to initiate the bookmarklet from the window.
* javascript:self.resizeTo(642,364);self.moveTo(0,0);
* http://dmcritchie.mvps.org/firefox/kws.htm look for "resize -" in the k.html file listed.

3G Nano: How do I get my photos to display full-screen?

Hi,
I have a 3G Nano.
When I go into PHOTOS the left 1/2 of the screen is always taken up by the menu selections and I have not yet figured out how to get the photos to display full screen. What am I doing wrong?
Please excuse... this is my first iPod...

Select "All Photos" from the menu to the left of those half pictures. Press the center button and you will get "thumb nails of your photos. Run your finger around the touch wheel and a yellow box will highlight the picture. If you start with the first picture and press the center button again you will bring up a full screen pict. To go to the next pict use the touch wheel in a clockwise manner to see each pict. Go to back to the photo menu and go to settings to try out some neat tricks and even add music. Don't ever be worried about asking a question. The only dumb question is the one you didn't ask! I got my nano yesterday and I have some questions that the "help" didn't address also

Reader XI do NOT want opening FULL SCREEN!

I am running Adobe Reader XI Version 11.0.2 on a Dell Windows 7 workstation with dual monitors. We generally have a dozen applications open and we bounce all around between them. Whenever I open a PDF document which ever monitor it was opened on last, it will open maximized on the display. I do *NOT* want it to open maximized and I have searched high and low, tried setting Preference settings for Full Screen, Documents, everything I can find and no matter what I do, as soon as I open a PDF it's full screen. I can get it to change how the document appears in the full screen view, like fit page or zoom to width, but it always opened FULL SCREEN!
How do I turn this feature OFF?!?!?!?!?!

I think I found the cause of the issue. In my case, I use the Adobe Customization Wizard XI to create a transform file for installation. One of the options I have enabled is under Direct Connect. Under the "Property" table I have the option DISABLE_BROWSER_INTEGRATION set to YES. I originally set this value because I didn't want PDFs to open within IE in my environment, I wanted it to open in Acrobat. I found that in version XI, the usual place to control this setting within Acrobat was no longer there. In previous versions, I would go to Edit > Preferences > Internet and enable/disable the option to "Display PDF in browser".
The workaround that I have done for now is create a separate transform file with the option set to NO. I uninstall Acrobat and reinstall it with the new transform file. To prevent PDFs from opening within IE, I have to go into Manage add-ons within IE and disable the "Adobe PDF Reader" add-on. The problem is that disabling the add-on within IE is profile-specific, which means that if I have multiple users that share the same computer, I will have to change that setting for each user, which is a bit inconvenient.
I was hoping that this setting would be as easy as finding it in the registry somewhere and changing it there, but no such luck for me. I looked over the registry and didn't see where the key or value was located. Hopefully someone else with more knowledge than me can solve this puzzle.

I have recently had to fire my web designer who was using iWeb. Now I'm trying to figure out how to get the site to open in iWeb on my new MacBook Pro. Is there a way?

I have recently had to fire my web designer who was using iWeb. Now I'm trying to figure out how to get the site to open in iWeb on my new MacBook Pro. Is there a way?

Firstly iWeb CAN'T IMPORT any kind of published html code as it has no import facility. You can however add html code, javascript and css by selecting the html snippet and placing it on your page the entering the code in here and clicking on Apply. You DO NOT create a shape as you say - you use the html snippet and place your code in there.
There are not really a lot of ways in which you can write code - if you want to enter small amounts of code, then you would use an ordinary text editor to do this such as Text Edit on a Mac or Text Wrangler. If you want to add code to iWeb like this, then you would either use the html snippet method in iWeb itself or you would have to publish the site to a local folder from iWeb and open the relevant html page with a text editor and add the additional code in this way and then publish. However, if he decided to add the code with a text editor, then you would have to upload the pages directly to the server using an ftp client - if you try to upload the site directly from iWeb, all the extra code will be overwritten.
As for checking whether the site was created using iWeb, all you need do is view the site in Safari and then click on View and then select View Source Code and it will tell you.
Even thoough extra code was added to the site and he might well have done this by publishing to a local folder and adding the code with a text editor, he should still have the domain file for the site too.
Ask again. I'm sure that for adding quick code, most would not want to use programmes such as Dreamweaver, but a simple text editor will suffice. As OT already said, if he claims that he does not have the domain.sites file, then try Flux 4 which is a web design programme and has full import facilities. At least this way, if he just gives you the published version of the site, you have some way of opening it.
You can download a free trial of Flux 4 and you can also purchase the full version from the Mac App Store if you decide you like it.

How to get my images always order by file name, and not by time of captur, in all the folders in the library?

How to get my images always order by arquive name, and not by time of captur, in all the folders in the library?
Sorry for the poor english, but im portugues.
In the library we can change the order of classification of image by, time of capture, name of file etc... I'm wondering if its possible define to be always by the name of file.
It ´s possible?
And i have other question, in print label we have an option to auto rotate to feet in page to have the image using the maximum area in the page (auto rotate, zoom etc), its possible to change the orientation of the rotation to be always in the other direction?

The Muvos are USB Mass Storage devices and do not have the ability to display track information based upon ID3 tags.
The Zens all read and display track info based upon ID3 tag information that is either gathered from an online source or entered by the end-user.
If you want the track information displayed instead of the ID3 tag information, you could edit the ID3 tags and rename the title to whatever you have as the file name. Not sure why your file names would differ so much from the ID3 tag info though, almost all of my content has the same name for the filename as it does on the ID3 tag title.

When I single finger click on my iMac Trackpad, on a .pdf document, (happens in a webpage only) Quicktime app. always opens the document and not Adobe or Preview! If a document has severaI Quicktime opens one page only. Can anyone assist?

When I single finger click on my iMac Trackpad, on a .pdf document, (happens in a webpage only) Quicktime app. always opens the document and not Adobe or Preview! If a document has severaI pages Quicktime will only show one page. So, not very useful!!
Can anyone assist?

More threads: https://support.mozilla.org/en-US/search?q=fbi&asked_by=&answered_by=&w=2&a=1&sortby=1&esab=a

How to get videos from touch, in full resolution?

How to get videos from touch, in full resolution?
I tried email, but that compresses them.

Import them as you would from any digital camera.
http://manuals.info.apple.com/enUS/iPod_touch_iOS4.1_UserGuide.pdf

How do i get my videos to be full screen when editing and viewing on ipad 2

How do i get my videos to be full screen when editing and viewing on ipad 2. When editing videos in imovie the video isnt zoomed in all the way, this is with imported videos as well as ipad videos... Please help!!

Oh, unless you shot tall.
If you shoot vertical/tall video it cannot be zoomed all the way out in the exit.
Shoot wide, or edit in a different editing app.

How to get quicktime movie into FCP X?

how to get quicktime movie into FCP X?

What exactly are you trying to do that using the import files function won't accomplish?
Russ

How to get Quicktime for iPod touch

How to get Quicktime on an Ipod touch

You already have it.
It is built into the ios.
There is nothing to get.

How to make apps. open full screen at start up in Mavericks?

Hi everyone,
Last week i just bought a mac & im new to mac osx. i just wanted to know when i put some apps like calendar to start at login,i put them in full screen mode but when i restart osx, it will open in regular window not full screen,interesting thing is, some apps like mail & utorrents open full screen at start up but some apps like safari & calendar dont,
is there any way to make any apps to open in full screen at start up or even when everytime u open app from dock. i searched google but couldnt find any real solution for this issue.
if you help me ill be gratful,sorry for my bad eng.
Thankx

If you want to open all applications you want in full screen, open the apps and put them in full screen. Then, go to System Preferences > General, and untick "Close windows when quitting an application".
By doing this, when you reopen the apps they will open at the point where you left them when you closed them (in full screen)

How to get Quicktime to always open full screen?

Similar Messages

Maybe you are looking for