How to get radio behavior for multiple embedded movies on a single page?

Hi,
I've got a single XHTML page with multiple embedded movie objects. The movies all play fine. I would like to convert the page to achieve a radio-style behavior for the movies so only one is running at any time. That is, if I click on a movie that's not running, the movie that is running will stop before the new movie begins. Any ideas on how this can be achieved? This might be more of a javascript question, but I was hoping somebody might have already done something similar. Thanks.
Paul

Roy,
It's an ugly solution but you can always add a hidden dummy structure item or KF and add all variables in the first executed query in the workbook.
- Find the query that has the most of the infobjects used in the other queries.
- Make sure this query is executed first in WB by removing/adding it in WB.
- Create the hidden dummy KF and add all the extra variables to this KF.
Solution usually works fine for me, but its not really feasible if the queries are have to many different infoobjects.
BR //Joakim

Similar Messages

Switch between multiple quicktime movies on a single page

I want them to play in a single window but use clickable links to switch between .mov files. I am working in DW CS5.

It depends on the code you are using to play the movies but it could be done with javascript. Although unless you are streaming the Quicktime movies, like a youtube, you will be forcing the user to download all the movies to load the page. If they are not setup to stream then you might want to load a separate page for each movie. If you show us the code you are currently using to play the movie we can help you through the process.

How do I mail merge from multiple Numbers sheets into a single Pages doc?

I am trying to mail merge in a Pages doc with more than one Numbers file as a source.
I am unable to do this, because the target fields only reference a single Numbers sheet. Fields needed from other Numbers sheets to populate my Pages doc show up as 'untargeted' and the merge attempt fails.
Can anyone help?
Thanks!

shefletch wrote:
I am trying to mail merge in a Pages doc with more than one Numbers file as a source.
I am unable to do this, because the target fields only reference a single Numbers sheet. Fields needed from other Numbers sheets to populate my Pages doc show up as 'untargeted' and the merge attempt fails.
The User Guide is clear: we may merge from ONE Numbers table.
Reorganize your datas so that they are available to the merge process from the first table of the first sheet of the used document.
External references are your friends to do that.
Yvan KOENIG (VALLAURIS, France) mercredi 9 septembre 2009 18:01:34

Qry:How to get different price for each price list (variable area) in order

1-How to get different price for each price list (variable area) in order for sale. for the opportunity to display and select multiple prices.
2- I add a location store from a table in line item and I want to see this area in order,.
I 'm created 2 field location(item line and order), 1 table location
I tried this for exemple : select $ [userfieldlocation.OITW]

Thanks Suda for your answer,
the Formatted Search for prices is OK, but for the Item locations in warehouse this is not so simple,
I must have several (at least 2) locations for the item in the Warehouse and a track of this location and search possibilities.
read carefully and imagine how (Management warehouse locations)
I added a user table '@Location' who linked to a user field 'U_Location in Item master data --> lnventory data line and an ather user field 'U_Location' in sales order
I met the value of location in the table (list of locations for any warehouse), I select the location of each item while receiving merchandise in the user field of inventory data line (Item M data) and this value appears in the sales order 'U_Location' user field ( only the location value in the default warehouse for this Item)
or
create an user field 'location' in Good receipt PO to fill it while receiving merchandise that appears in the sales order to give possibility to find/select the location of the item at this order and in Item master data
I think we will use all these tables
@LOCATION
PDN1
OITM
OITW
OWHS
RDR1
Juste a another question : where you found this and What is: ' 38.1.0 '
Is it in document (System information):Item=38 Pane=1 ??
Thanks,
Ouchen

How to suppress License Information for multiple logon screen?

Hi,
While LOGIN we will get "License Information for multiple logon screen" will displayed.
How to suppress that screen.
Regards,
Bala

>
bala virupaksha wrote:
> Hi,
>
> While LOGIN we will get "License Information for multiple logon screen" will displayed.
> How to suppress that screen.
>
> Regards,
> Bala
and why would you want to do that?
does your contract with SAP say, that you may use multiple logins for free? would SAP's contract-issue department agree that -in your case- it's not necessary to record multiple logins?
have you read this part of the SAP license policy?
SAP gives express notice that the accessing of a system by more
than one person using one and the same named user constitutes
a breach.
tell me this does not apply to you ...

How to get the data from multiple nodes to one table

Hi All,
How to get the data from multiple nodes to one table.examples nodes are like A B C D E relation also maintained
Regards,
Indra

HI Indra,
From Node A, get the values of the attributes as
lo_NodeA->GET_STATIC_ATTRIBUTES( IMPORTING STATIC_ATTRIBUTES = ls_attributesA ).
Similarily get all the node values from B, C, D and E.
Finally append all your ls records to the table.
Hope you are clear.
BR,
RAM.

How to get Open Balance for the year and Total Ending Balance?

For a given account, how to get Open Balance for the year (Cumulative Ending Balance) and Total Ending Balance (Cumulative Ending Balance)?
Is there any function module available? or should I read from some tables? Please advice.

Hello Paul,
You could try calling one of the following BAPIs - see which one meets your requirement. They are documented well so shouldn't be a problem finding out the correct one for your requirements.
BAPI_GL_GETGLACCBALANCE
BAPI_GL_GETGLACCCURRENTBALANCE
BAPI_GL_ACC_GETBALANCE
BAPI_GL_ACC_GETCURRENTBALANCE
BAPI_GL_ACC_GETPERIODBALANCES
BAPI_COND_VAL_DECRE_BALANCES
You might have to put in some of your own logic after the BAPI call to get what you want.
Hope this helps,
Cheers,
Sougata.
p.s. Also look at FM FAGL_GET_ACCOUNT_BALANCE
Edited by: Sougata Chatterjee on May 7, 2008 11:47 AM

How to create one TO for multiple TRs

Dear All,
how to create one TO for multiple TRs, kindly suggest me
Regards,
balu

As for your question: it is discussed in sAP online help:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f841f24afa11d182b90000e829fbfe/frameset.htm
Sorry I misunderstood your question.
The above mentioned solution won't create one single TO from multiple TR.
Edited by: Csaba Szommer on Aug 11, 2010 9:46 AM

A^b = n ,How to get the value for a ?

a^b = n ===> n = Math.pow(a,b)
How to get the value for a ?
dose Java have API to get the value for a ?
Thanks for help~~~

a^b = n
=>
a = n^(1/b)
So,
a = Math.pow(n,1.0/b)

How to Get Missing Dates for Each Support Ticket In My Query?

Hello -
I'm really baffled as to how to get missing dates for each support ticket in my query. I did a search for this and found several CTE's however they only provide ways to find missing dates in a date table rather than missing dates for another column
in a table. Let me explain a bit further here -
I have a query which has a list of support tickets for the month of January. Each support ticket is supposed to be updated daily by a support rep, however that isn't happening so the business wants to know for each ticket which dates have NOT been
updated. So, for example, I might have support ticket 44BS which was updated on 2014-01-01, 2014-01-05, 2014-01-07. Each time the ticket is updated a new row is inserted into the table. I need a query which will return the missing dates per
each support ticket.
I should also add that I DO NOT have any sort of admin nor write permissions to the database...none at all. My team has tried and they won't give 'em. So proposing a function or storable solution will not work. I'm stuck with doing everything
in a query.
I'll try and provide some sample data as an example -
CREATE TABLE #Tickets
TicketNo VARCHAR(4)
,DateUpdated DATE
INSERT INTO #Tickets VALUES ('44BS', '2014-01-01')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-05')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-07')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-03')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-09')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-11')
So for ticket 44BS, I need to return the missing dates between January 1st and January 5th, again between January 5th and January 7th. A set-based solution would be best.
I'm sure this is easier than i'm making it. However, after playing around for a couple of hours my head hurts and I need sleep. If anyone can help, you'd be a job-saver :)
Thanks!!

CREATE TABLE #Tickets (
TicketNo VARCHAR(4)
,DateUpdated DATETIME
GO
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-01'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-05'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-07'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-03'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-09'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-11'
GO
GO
SELECT *
FROM #Tickets
GO
GO
CREATE TABLE #tempDist (
NRow INT
,TicketNo VARCHAR(4)
,MinDate DATETIME
,MaxDate DATETIME
GO
CREATE TABLE #tempUnUserdDate (
TicketNo VARCHAR(4)
,MissDate DATETIME
GO
INSERT INTO #tempDist
SELECT Row_Number() OVER (
ORDER BY TicketNo
) AS NROw
,TicketNo
,Min(DateUpdated) AS MinDate
,MAx(DateUpdated) AS MaxDate
FROM #Tickets
GROUP BY TicketNo
SELECT *
FROM #tempDist
GO
-- Get the number of rows in the looping table
DECLARE @RowCount INT
SET @RowCount = (
SELECT COUNT(TicketNo)
FROM #tempDist
-- Declare an iterator
DECLARE @I INT
-- Initialize the iterator
SET @I = 1
-- Loop through the rows of a table @myTable
WHILE (@I <= @RowCount)
BEGIN
-- Declare variables to hold the data which we get after looping each record
DECLARE @MyDate DATETIME
DECLARE @TicketNo VARCHAR(50)
,@MinDate DATETIME
,@MaxDate DATETIME
-- Get the data from table and set to variables
SELECT @TicketNo = TicketNo
,@MinDate = MinDate
,@MaxDate = MaxDate
FROM #tempDist
WHERE NRow = @I
SET @MyDate = @MinDate
WHILE @MaxDate > @MyDate
BEGIN
IF NOT EXISTS (
SELECT *
FROM #Tickets
WHERE TicketNo = @TicketNo
AND DateUpdated = @MyDate
BEGIN
INSERT INTO #tempUnUserdDate
VALUES (
@TicketNo
,@MyDate
END
SET @MyDate = dateadd(d, 1, @MyDate)
END
SET @I = @I + 1
END
GO
SELECT *
FROM #tempUnUserdDate
GO
GO
DROP TABLE #tickets
GO
DROP TABLE #tempDist
GO
DROP TABLE #tempUnUserdDate
Thanks,
Shridhar J Joshi
<If the post was helpful mark as 'Helpful' and if the post answered your query, mark as 'Answered'>

How to get the date for the first monday of each month

Dear Members,
How to get the date for the first monday of each month.
I have written the following code
SELECT decode (to_char(trunc(sysdate+30 ,'MM'),'DAY'),'MONDAY ',trunc(sysdate+30 ,'MM'),NEXT_DAY(trunc(sysdate+30 ,'MM'), 'MON')) FROM DUAL
But it look bith complex.
Abhishek
Edited by: 9999999 on Mar 8, 2013 4:30 AM

Use IW format - it will make solution NLS independent. And all you need is truncate 7<sup>th</sup> day of each month using IW:
select sysdate current_date,
        trunc(trunc(sysdate,'mm') + 6,'iw') first_monday_the_month
from dual
CURRENT_D FIRST_MON
08-MAR-13 04-MAR-13
SQL> Below is list of first monday of the month for this year:
with t as(
          select add_months(date '2013-1-1',level-1) dt
            from dual
            connect by level <= 12
select dt first_of_the_month,
        trunc(dt + 6,'iw') first_monday_the_month
from t
FIRST_OF_ FIRST_MON
01-JAN-13 07-JAN-13
01-FEB-13 04-FEB-13
01-MAR-13 04-MAR-13
01-APR-13 01-APR-13
01-MAY-13 06-MAY-13
01-JUN-13 03-JUN-13
01-JUL-13 01-JUL-13
01-AUG-13 05-AUG-13
01-SEP-13 02-SEP-13
01-OCT-13 07-OCT-13
01-NOV-13 04-NOV-13
FIRST_OF_ FIRST_MON
01-DEC-13 02-DEC-13
12 rows selected.
SQL> SY.

How to get column names for a specific view in the scheme?

how to get column names for a specific view in the scheme?
TIA
Don't have DD on the wall anymore....

or this?
SQL> select text from ALL_VIEWS
2 where VIEW_NAME
3 ='EMP_VIEW';
TEXT
SELECT empno,ename FROM EMP
WHERE empno=10

How to get Alerts mail for adapter engine errors in SAP PI 7.0

Hi Friends,
I configured Alerts in PI 7.0. with the help of t-code u2018ALRTCATDEF and created a new alert catergory.
In container tab i have mentioned all give below elements.
SXMS_MSG_GUID, SXMS_RULE_NAME, SXMS_ERROR_CAT, SXMS_ERROR_CODE, SXMS_FROM_PARTY, SXMS_FROM_SERVICE, SXMS_FROM_NAMESPACE, SXMS_FROM_INTERFACE, SXMS_TO_PARTY, SXMS_TO_SERVICE, SXMS_TO_NAMESPACE,SXMS_TO_INTERFACE
I am getting alerts when I manually test the alerts configurations by running the report u2018RSALERTTESTu2019.
I am getting mail as :
Alert ID: ##00009##
Dear Administrator,
This is with respect to XI Scenario. During processing of XML file from ECC or XYZ Server, Following error has been occured:
Message ID:
Interface:
NOTE: To check the file name, go to SXMB_MONI and search for above message ID.
Double click on that message ID and click on error in left hand tree.
Please take appropriate action in co-ordination with respective functional and BASIS consultant.
But When I am getting a error , I am not getting an alert mail. Right now iam doing in XI Development.
I am not getting an Alert mail , when my message is in status of : System Error . Error catergory is : XI_J2EE_ADAPTER_JDBC.
Kindly tell how to get alert mail for error catergory : XI_J2EE_ADAPTER_JDBC and in Adapter engine errors.
How to get alert mail when my message is failed with any reason in Adapter engine.
Waiting for quick replay. Please help me out.
Regards,
Ahmed.

Hi thanks for quick reply.
As per your given link : http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/14877. [original link is broken]
I have done all these steps. But still little problem.
as per link he is getting Error description , error message id , alert rule..
In my case I am not getting these information. when my messages failed. When I am doing manully testing the alert getting an mail as :
Alert ID: ##00009##
Dear Administrator,
This is with respect to XI Scenario. During processing of XML file from ECC or XYZ Server, Following error has been occured:
Message ID:
Interface:
NOTE: To check the file name, go to SXMB_MONI and search for above message ID.
Double click on that message ID and click on error in left hand tree.
Please take appropriate action in co-ordination with respective functional and BASIS consultant.
Is it okay the body of mail??.
I am not getting alert mail when my messages failed in adapter engine and Integration Engine.
Ex my message is failed in AE:as below.
My messages flow as : SAP --> XI --> DB.
Messages is success (in ECC moni)> XI moni also success> XI Adapter engine getting error as (Status: System Error) and (Error Category : XI_J2EE_ADAPTER_JDBC).
Regards,
Ahmed.

How to get the ItemKey for a Workflow triggered by an event in Oracle Apps

Hello,
I have added a custom sub process to the seeded "OM Order Header" workflow. The process sends a notification. There are a few attributes in the body of the message tied to this notification, to which I am trying to assign values to using the syntax:
SetItemAttrText (itemtype, itemkey, attrname, attrvalue).
I have the internal names for the item type and attribute name, but don't know how to get the value for the item key. I understand the item key is supposed to be unique for each item type and is automatically generated by the workflow engine when the work flow fires. Is there a built-in function or some means to get this value?
Regards,
Smita

Have you tried to query WF_ITEMS? -- http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=WF_ITEMS&c_owner=APPLSYS&c_type=TABLE
bde_wf_item.sql - Runtime Data of a Single Workflow Item [ID 187071.1]
Thanks,
Hussein

How to get the order for these decorations?

hello,
I want to programatically resize all the controls, indicators and decorations on the front panel.
I am getting the references of all the controls and indicators and able to resize them, as each n every control and indicator has a tabbing order set to it.
I am also getting the references of all the decoration used on the front panel but not able to get the order.
how to get the order for these decorations?

The order of the decorations is the same as the back to front order. So you
can change it by bringing decorations to front, or sending them to the back.
It has been suggested many times that decorations should have labels as well
as controls, but at the moment there is no way to tell which reference
belongs to which decoration (besides position and order).
Regards,
Wiebe.

How to get radio behavior for multiple embedded movies on a single page?

Similar Messages

Maybe you are looking for