How to get real time date from Sunny Boy Inverters through SMA Webbox?

Hello,
I was looking on how to communicate with three Sunny Boy Inverters that are linked to a SMA webbox. Currently we get a daily summary of the solar production, but we would like to have real time data uploaded into LabVIEW. The people of SMA said that I needed to use "RS485 protocols" with a software they have called YASDI (http://www.sma.de/en/products/software/yasdi.html); however, I keep finding other information that says that I can communicate with my inverters using the SMA OPC server (http://www.sma-america.com/en_US/products/software/sma-opc-server.html). I also found this forum, http://forums.ni.com/t5/LabVIEW/Sunny-Island/m-p/809129/highlight/true#M368718, where I understood that I don't need to use the OPC server, but instead I can use UDP communication to get the data. I found another forum that talks about using the YASDI :http://forums.ni.com/t5/LabVIEW/help-with-Sunny-Boy-inverter/m-p/293273/highlight/true#M153892.
I've tried to communicate with the people of the forums and I haven't gotten any responses; therefore, I wanted to see if I can get cleared up on this issue. Do I need to use OPC server to communicate with my inverters through the webbox or can I just use UDP in LabVIEW?
Any help would be greatly appreciated,
Thanks
Jose

Hello,
I got a response from Vincezo: http://forums.ni.com/t5/LabVIEW/Sunny-Island/m-p/1794786. I'm currently working with the VI to communicate with the webbox through UDP. Since the PRC protocols to communicate with the webbox are in JavaScript Object Notation (JSON), I'm not sure if the data-in string has to be in JSON format. However, the only error I'm getting is 56 in the UDP read function. I've tried increasing the size of the bytes and timeout, but I keep getting this error. If anyone can help me with this part I would very grateful.
Thanks,
Jose

Similar Messages

WLST: How to get "Activation Time" data from a managed server ?

Hello,
does someone knows how to get the "Activation Time" (Time when the managed server was started) of a managed server via WLST under WLS 8.1 & 9.2 ?
Thx a million.

Under 9.2
connect()
serverRuntime()
print cmo.getActivationTime()
print java.util.Date(cmo.getActivationTime())
<Markus Jessl> wrote in message news:[email protected]..
Hello,
does someone knows how to get the "Activation Time" (Time when the managed
server was started) of a managed server via WLST under WLS 8.1 & 9.2 ?
Thx a million.

HOW to update real time data from sap to other application?

We have two option of passing data from sap to other system.
1. web service
2. through idoc.
can anyone tell me advantages & disadv. of these two options.
Which scenario shd we use web service & idoc.
How is idoc triggerred.?
Is it only through user exit?
Kindly suggest any other ways for interacting with a 3rd party system which does not use a file.

Dear Libin,
IF you are using sap sytem as a sender then its better to use idoc's. Actually both systems (idoc and webservice) have there own advantages and disadvantages. Look up sdn for more info.
My personal choice would be idoc since with webservices you would need special tools like xml spy or altova and the skill to analyze and run those tools.,, its a little tedious..
Rgds
joel

How to get the measurement data from IMU using SBRIO through SPI?

Hi All,
I’am trying to use the SPI communication protocol to realize the bridge between my Vectornav VN100 IMU chip and the LABView through the SBRIO 9602. I amended the SPI sample code from NI website based on my own device and configuration. It compiled and ran well. The problem is the IMU we are using need a 16 bytes command and it will give back a response containing the measurement data. But it seems that with the code I have, I can only send an at most 32 bits command once. Hope anyone who has experience in IMU implementation on LABView could give me some help! Thanks a lot!
Nick

Kyle,
Thank you very much!
I attached the amended program and the Manual Sheet of the IMU I am using.
Since I only need to one port, I just amended the configuration for port 1 and adjusted the code for my device.
I think the problem exist in the data sending mechanism, you can check the requirement out in P12 and P13 of the manual sheet.
Best Regards!
Nick
Attachments:
Vectornav VN100.pdf ‏1774 KB
spi_dual_port_example.zip ‏755 KB

How to Integrate real time data between 2 database servers

How to Integrate real time data between 2 database servers
May 31, 2006 2:45 AM
I have a scenario where the data base (DB2 400) is maintained by AS 400 application and my new website application based on j2ee platform access the same database also but the performance is very low. So we have thought of introducing new oracle data base which will be accessed by j2ee application and all the data from db 400 database will be replicate to oracle data base. In that scenario the only problem is of real time data exchange between 2 databases. How do we achieve that considering both the application As400 and j2ee website application are running in parallel and accessing the same information lying on DB2 400 database. We have to look at transaction management also.
Thanks
Panky
DrClap
Posts:25,835
Registered: 4/30/99 Re: How to Integrate real time data between 2 database servers
May 31, 2006 11:16 AM (reply 1 of 2)
You certainly wouldn't use XML for this.
The process you're looking for is called "replication". Ask your database experts about it.
I predict that after you spend all the money to install Oracle and hire consultants to make it replicate the DB2/400 database, your performance problem will be worse.
panks
Posts:1
Registered: 5/31/06 Re: How to Integrate real time data between 2 database servers
May 31, 2006 11:55 PM (reply 2 of 2)
Yeajh I now that its not a XML solution.
Replication is one of the option but AS400 application which uses DB2/400 DB is highly loaded and proposed website also uses the same database for retrieval and updation purpose.All the inventory is maintained in the DB2/400 database so I have thought of introducing new oracle database which will be accessed by new website and it will have all the relevant tables structure along with data from DB2/400 application. Now whenever there is a order placement from new website then first it should update the oracle database and then this data shuold also migrate to db2/400 application at real time so that the main inventory which is lying on db2/400 should be updated on real time basis because order placement is aslo possible from As400 application. So the user from As400 application should not get the wrong data.
Is it possible to use MQ products??
-Panky

Hi,
the answer to your question is not easy. Synchronization or integration or replication data between 2 (or more) database servers is very complicated task, even though it doesn't look like.
Firstly I would recommend to create good analysis regarding data flow.
Important things are:
1) what is primary side for data creation. In other words on which side - DB2 or Oracle - are primary data (they are created here) and on which side are secondary data (just copies)
2) on which side are data changed - only in DB2 side or only on Oracle side or on both sides
3) Are there data which are changed on both side concurrently? If so how should be conflicts solved?
4) What does it mean "real time"? Is it up to 1 ms or 1s or 1 min or 1 hour?
5) What should be done when replication will not work? I mean replication crash etc.
BTW. The word "change" above means INSERT, UPDATE, DELETE commands.
Analysis should be done for every column in every table. When analysis is ready you can select the best system for your solution (Oracle replication, Sybase replication server, MQ, EJB or your proprietary solution). Without analysis it will be IMHO gunshot into the dark.

How to get the real-time data from a CCD camera in labview?

I am going to setup a monitor system and need to acquire the intensity of each pixel at each second from a CCD camera. Also, I need to to some simple calculations with these real-time data at every moment to get my finanl output in this monitor system.
How may I do this using Labview?
Thank you very much.
Kai

We don't have special powers, so we can't guess if you have Imaq Vision or not, if your camera comes with a LabVIEW driver, if it has an USB interface, or firewire, or a dedicated NI card, if you just want to detect a move, or a change in intensity, etc...
So, try to be more specific with your question, that will helps a lot
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...

How to get real time information about how many user are logged in and thei

I use tomcat as my server platform in Ubuntu for a war file.
I know in order to get real time information about how many user are logged in, we can count how many active sessions exist by a SessionCounter code. However, I have to permit HttpSessionListener in web.xml of tomcat. From other users' experiences, the configuration is complexed and has some errors.
Here's the link:http://www.stardeveloper.com/article...1112001&page=1
In order to get users' ip, in jsp, use request.getremotehost() or
request.getremoteaddress() by editing the jsp file.
I wonder if there's some open source software to use for these two purposes.
Thank you!

That url is missing a few bits. The ... in the middle doesn't help.
we can count how many active sessions exist by a SessionCounter code.
However, I have to permit HttpSessionListener in web.xml of tomcat.
From other users' experiences, the configuration is complexed and has some errors.And have you tried it? The configuration isn't that complex.
What errors do you mean? Errors in tracking people, variance in the count? Probably related to internet issues and nothing you can do will alleviate them.

How to get the complete data from Webdynpro using a RFC

hi guys,
A form is created in the webdynpro, when that pdf form is called the user have to provide the key field ie the employee number in the form and then when he press the 'go' button a rfc is called and it gives all the details of the employee in the form. Then the user have to input some fields in the form and he have press the submit button. My problem is here, when the user is going to press the submit button that form will be converted to a stream (binary) of data and it is sent to one of the import parameter used in the RFC.
I have created a RFC and created a import parameter of data type XSTRING, since i want to see what exactly R3 is receiving from web dynpro i am writing this contant in the sever as a text file. When i saw that text file i cant see the complete data.
And when i searched in R3 the capacity of xstring is 1024 CHAR, so i dont know how to capture the entire data from webdynpro into my R3.
I give the code what i worte please tell me am i missing anything in my code, or is there any data type which can hold more than 500kb of data which is coming from webdynpro.
FUNCTION ZSEND_MAIL_ATTACHMENT.
""Local Interface:
*" IMPORTING
*"     VALUE(OUT_PLACE_LEVEL) TYPE XSTRING OPTIONAL
*"     VALUE(BIN_DATA) TYPE INDX_CLUST OPTIONAL
*" TABLES
*"      IT_MESSAGE STRUCTURE SOLISTI1
Data Declaration
DATA: gd_cnt TYPE i,
      gd_sent_all(1) TYPE c,
      gd_error TYPE sy-subrc,
      tab_lines LIKE sy-tabix.
Structure Declaration
DATA : BEGIN OF it_file OCCURS 0,
          row(255),
         END OF it_file.
DATA : BEGIN OF i_split OCCURS 0,
row(50),
END OF i_split.
Internal Table Declaration
data : it_receivers like table of SOMLRECI1 with header line."occurs 0.
DATA : objbin LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE. "sOLIX
DATA : it_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE.
data : wa_receiver like table of SOMLRECI1 with header line.
data : it_receiver like table of SOMLRECI1 with header line.
data : v_bin_data like SOLISTI1 occurs 0 with header line.
DATA : gd_doc_data LIKE sodocchgi1 OCCURS 0 WITH HEADER LINE.
*data bin_data1 like table of solix with header line.
REFRESH : objbin, it_packing_list, it_receivers, wa_receiver.
CLEAR   : objbin, it_packing_list, wa_receiver, it_receivers.
DATA V_SUBJECT(255) VALUE 'HI'.
gd_doc_data-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( it_message ).
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SENDFILE'.
gd_doc_data-obj_descr = v_subject.
gd_doc_data-sensitivty = 'O'.
APPEND GD_DOC_DATA.
Appending The Internal Table it_packing_list
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
it_packing_list-doc_type = 'RAW'.
it_packing_list-body_num = tab_lines.
APPEND it_packing_list.
*CALL FUNCTION 'GUI_UPLOAD'
*EXPORTING
*filename = V_FILE_PATH
*filetype = 'BIN'
*TABLES
*data_tab = BIN_DATA.
move bin_data to v_bin_data.
append v_bin_data.
*move soli to bin_data.
LOOP AT V_BIN_DATA into objbin.
MOVE v_bin_data TO objbin-line.
    APPEND objbin.
ENDLOOP.
CLEAR it_packing_list.
DESCRIBE TABLE objbin LINES tab_lines.
it_packing_list-transf_bin = 'X'.
it_packing_list-head_start = 1.
it_packing_list-head_num = 1.
it_packing_list-body_start = 1.
it_packing_list-doc_type = 'PDF'.
it_packing_list-body_num = tab_lines.
it_packing_list-doc_size = tab_lines * 255.
APPEND it_packing_list.
data file(255) value '/tmp/bali.txt'.
*Appending The Internal Table it_receivers
close dataset '/tmp/bali.txt'.
open dataset '/tmp/bali.txt' for output in text mode encoding default.
if sy-subrc = 0.
loop at objbin.
transfer objbin to '/tmp/bali.txt'.
endloop.
else.
write 'hi'.
close dataset '/tmp/bali.txt'.
endif.
it_receiver-receiver = '[email protected]'.
it_receiver-rec_type = 'U'.
it_receiver-com_type = 'INT'.
APPEND wa_receiver.
move wa_receiver[] to it_receiver[].
append it_receiver.
*Move wa_receiver[] to it_receivers[].
Clear it_receivers.
if i_OUT_PLACE_LEVEL NE 0.
loop at it_receivers into wa_receiver.
   loop at it_receivers into wa_receiver.
**Function Module To Post The Message To Externa Mail
     CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       EXPORTING
         document_data              = gd_doc_data
         put_in_outbox              = 'X'
         commit_work                = 'X'
       TABLES
         packing_list               = it_packing_list
         CONTENTS_TXT               = objbin
         receivers                  = it_receivers
       EXCEPTIONS
         too_many_receivers         = 1
         document_not_sent          = 2
         document_type_not_exist    = 3
         operation_no_authorization = 4
         parameter_error            = 5
         x_error                    = 6
         enqueue_error              = 7
         OTHERS                     = 8.
     clear wa_receiver.
ENDFUNCTION.

You have to convert your long string to a table of shorter strings.
There may be other ways, but one possibility is to use a loop to process you string.
while (there is something left)
   put the next e.g. 1024 characters in a new row of your table
endwhile
If you need to reconstruct your string from the table, don't use simple concatenation since it will remove blanks at the end of lines. Believe me (from experience) sooner or later this will happen.
Instead you need to either set the subsections of your long string, or insert from the end of your table and keep shifting the contents (probably less efficient) right

How to get the time length from send record command to record video really?

I have two buttons. Record/Stop
I press Record button to record the video and press Stop
button to stop recording.Now,I spend 1986 ms from press Record
button to press Stop button.
But the flv file's length is 1920 or 1910 or 1915 ms.
So I want to get the time length from send record command to
record video really.
Can you give me some suggests.
Thanks!

maybe you have lag in publishing.... are you try watch de
NetStream.liveDelay() method?
or start counting when NetStream.onStatus has
"NetStream.Record.Start" and "NetStream.Record.Stop" in information
objects....

How to get a time part from Date datatype

Hi,
I would like to know how to extract the timestamp alone from DATE datatype? If my input is '27-SEP-2011 23:59:00' I need the output as 23:59:00. I am surprised to see that there are no in-built functions for this or may be I am wrong. Basically I need to remove the date part from DATE data type and get the time.Please assist.
-Thanks
Edited by: user9546145 on Sep 27, 2011 2:24 PM
Edited by: user9546145 on Sep 27, 2011 2:25 PM

Hi,
user9546145 wrote:
Hi,
I would like to know how to extract the timestamp alone from DATE datatype? Be careful! In Oracle, TIMESTAMP means a datatype, similar to but distinct from DATE. You'll avoid confusion if you don't use the word "timestamp" to mean anything else.
There is a built-in function, TO_CHAR:
TO_CHAR (dt_col, 'HH24:MI:SS')Depending on how you plan to use the time, TRUNC is another handy built-in function:
dt_col - TRUNC (dt_col)is a NUMBER (not less than 0, but less than 1) which is suitable for many tasks, such as finding the average time.
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables, and also post the results you want from that data.
Explain, using specific examples, how you get those results from that data.
Always say which version of Oracle you're using.

How to get/process the Data from XMLSocket?

Hello All,
I'm using Adobe Professional CS6, and Actionscript 3.0.
To start with I have a C# program that basically just feeds data out from a Server in the form of XML data. I then have a Flash program that should receive the data and then I'll do some stuff with it. We had this working in Actionscript 1.0 but we need to upgrade the code to Actionscript 3.0, but instead of just trying to convert stuff over to the new Actionscript version, I'm going to re-write the program.
So far I've basically just defined some EventListeners most of which I found examples of online for using XMLSockets. As of now the Flash program will connect an XMLSocket to the Server that is feeding out the data, and the server feeding the data resends new data every 5-10 seconds or so.
So when a grouping of XML Data comes in on the port I defined, the following Function gets executed for handling the incoming data. For my EventListener's Function for "socket.addEventListener(DataEvent.DATA, dataHandler);" ("socket" is defined as --> var socket = new XMLSocket(); ). So when the new data comes in it executes the above function.
The trouble I'm having is declaring a new variable of type "XML" and then using that variable to pull out individual "nodes/children" from the incoming XML Data. I found an example online that was very close to what I want to do except instead of using an XMLSocket to get data constantly streaming in they use the "URLLoader" function to get the XML data. I know I'm receiving the XML data onto the server because if I set the (e: DataEvent) variable defined in the function "head" to a string and then run a trace on that I can see ALL of the XML data in the "Output Window".
But I can't seem to be able to set (e: DataEvent) to a XML variable so I can access individual elements of the XML data. The example I found (which uses the URLLoader instead) uses this line (myXML = new XML(e.target.data);) to set the XML Variable, which won't work for mine, and if I try to do the same thing in my code it simply prints this for as many lines as there is XML data --> "[object XMLSocket]"
MY CODE:
*I left out the other Functions that are in my code for the EventListeners you'll see defined below, except for the one in question:
                         ---> "function dataHandler(e: DataEvent):void"
import flash.events.IOErrorEvent;
import flash.events.ProgressEvent;
import flash.events.SecurityErrorEvent;
import flash.events.DataEvent;
var socket = new XMLSocket();
socket.addEventListener(Event.CONNECT, connectHandler);
socket.addEventListener(Event.CLOSE, closeHandler);
socket.addEventListener(DataEvent.DATA, dataHandler);
socket.addEventListener(IOErrorEvent.IO_ERROR, ioErrorHandler);
socket.addEventListener(ProgressEvent.PROGRESS, progressHandler);
socket.addEventListener(SecurityErrorEvent.SECURITY_ERROR, securityErrorHandler);
var success = socket.connect('server.domain.name.local',3004);
The code in this function was used from an example I found online as described above in the post:
          LINK --> http://www.republicofcode.com/tutorials/flash/as3xml/
// The Commented out code (*in blue) will show ALL the xml data inside the "Output Window":
function dataHandler(e: DataEvent):void {
          // var myStr:String = e.data;
          var xml:XML;
          xml = new XML(e.target.data); //<--- THIS DOESN"T WORK (I DONT THINK 'target' IS CORRECT HERE)??
          if (socket.connected)
                    // trace(myStr)
                    trace(xml);
The Output from the line "trace(xml)" will show this data below in the "Output Window" (*FYI There should be 6 lines of XML Data on each 'update'):
[object XMLSocket]
[object XMLSocket]
[object XMLSocket]
[object XMLSocket]
[object XMLSocket]
[object XMLSocket]
Could someone show or point me in the right direction on this. I want to be able to access specific parts of the incoming XML Data.
Here's some sample XML Data:
<MESSAGE VAR="screen2Display" TEXT="CSQ_1" />
<MESSAGE VAR="F1_agentsReady" TEXT="111" />
<MESSAGE VAR="F1_unavailableAgents" TEXT="222" />
<MESSAGE VAR="F1_talkingAgents" TEXT="333" />
<MESSAGE VAR="F1_callsHandled" TEXT="444" />
<MESSAGE VAR="F1_ABDRate" TEXT="555" />
Any thoughts or suggestions would be greatly appreciated..!
FYI:
I'm VERY new to Actionscript/Flash Developing (*about a week now), so go easy on me haha...
Thanks in Advance,
Matt

Hey Guys, thanks ALOT for the replies!!
Andrei1 and Sinious,
The code I show above is actually just what I found in an example online, and its what i was trying to show you what "they" used
in the URLLoader example. I wasn't trying to use URLLoader, but it was the closest example I found online to what I was trying to
do in terms of processing the XML Data, and not how I read it in. So XMLSocket IS definetly what I'm trying to use because the Server
I'm receiving the XML Data from "pushes" it out every 10 seconds or so. So yea I definatly want to use XMLSocket and not URLLoader...
Sorry for the confusion...
The example you show:
     var xml:XML = new XML(e.data)
Is actually what I had in my original code but I couldn't get it to show anything in the "Output Window" using the trace() method on
it, so I assumed I wasn't doing it correctly...
What my original code was in the "dataHandler()" Function was this:
function dataHandler(e: DataEvent): void
    var xml: XML = XML(e.data);
    if (socket.connected)
        trace(xml);
        msgArea.htmlText += "*socket.connected = TRUE\n"
    } else {
        msgArea.htmlText += "*socket.connected = FALSE\n"
OUTPUT:
And what I get when I run a Debug on it is, in the "msgArea", which is just a simple Text Box w/ Dynamic Text on the main frame it prints:
    "socket.connected = TRUE
     socket.connected = TRUE
     socket.connected = TRUE
     socket.connected = TRUE
     socket.connected = TRUE
     socket.connected = TRUE"
It prints that message 6 times in the msgArea for each XML Message that comes in (*which I think 6 times because there
are 6 "sections/nodes" in the XML Data). But then NOTHING prints in the "Output Window" for the "trace(xml)" command.
Not sure why nothing is showing in the "Output Window", maybe the XML is not complete? But I could see data in the "Output
Window" when I set "e.data" to a string variable, so I know the Data is reaching the program. Since I could see the XML Data in
a string variable, does that mean I can rule out that the XML Data coming in is considered a "complete" XML Document?
Because I wasn't sure if to be considered a complete XML Document it would need to have this included in the message..?
                    "<?xml version="1.0"?>"
For the tests I'm running, one single XML message which is being pushed out from the server looks like this:
<MESSAGE VAR="screen2Display" TEXT="Call_Queue_1" />
<MESSAGE VAR="F1_agentsReady" TEXT="111" />
<MESSAGE VAR="F1_unavailableAgents" TEXT="222" />
<MESSAGE VAR="F1_talkingAgents" TEXT="333" />
<MESSAGE VAR="F1_callsHandled" TEXT="444" />
<MESSAGE VAR="F1_ABDRate" TEXT="555" />
Would I need to include that "Header" in the XML message above?
               i.e. "<?xml version="1.0"?>"
Or do I need to be more specific in the trace command instead of just using "trace(xml)"?
Also yes, I already have a Flash Policy file setup and working correctly.
Anyway, thanks again guys for the replies, very much appreciated!!
Thanks Again,
Matt

How to get year,month,date from a Date object?

thanks

The getTime() method will return the number of milliseconds since January 1, 1970, 00:00:00 GMT. You can then write a number of functions to calculate the date from this.
The toString() function returns a string with the current value of the object - i.e 2002-10-17 (it's unusual formatting (YYYY-MM-DD) is useful when validating an input in real time, though beyond this, I've no idea why they put it this way around). You can then use string function substirng() to break this down into parts.
i.e. if your Date object was called today:
String DD = today.toString().substring()(8)
String MM = today.toString().substring()(5,2)
String YYYY = today.toString().substring()(0,4)
There are other methods (see API) - but these have been deprecated - that means, although they can be used, they are not recomended.
There is also a Calendar object, though this seems to have the same problems.
Hope this helps :)

How to get the refreshed data from Input schedule while using evsnd

Hi Experts,
                 I am using EvSnd function for sending the data from a Input schedule.
Acc                Value
xx----
    xy------        10
    xz-------       20
these above cell value 10,20 are getting sent by evsnd function which is written in different cell.
Now after successfully sending, how I can see these are also getting refreshed, like in Evdre
Acc                Value
xx----
        30
    xy------        10
    xz-------       20
Thanks
Anupam

Thanks my friend.
But the point is I need to show the updated data for all the cells (for xx, xy,xz). The point is if I use the evsnd then after the data has been sent, those two cells xy & xz will be blank once again. And so if the user will not be able to check what the data they have sent for these member from that sheet.
              They have to get a report which will show the figures.
And we can't even use the evgts in the xy/xz cell as the formula is going to be erased as soon as the user enter the data in that.
so how we can do the sheet similar to evdre ip schedule..where after every data send the cell range shows latest data.

How to get the raw data from particular document's schedule ?

Hello,
I am now able to get the data from a document usign RESTful Web Services SDK and what I need is to
get the data not from the current version of the document but from the schedule that were executed some time ago
with the older data than the current data.
Any hints ?

Hey Jacek,
Please, look at the /schedules into Raylight API.
Regards,
Anthony

How to get the history data from r3?

Hi Experts,
I have loaded stock data for jan through the flat file load.
The stock consists for 2,9,16,23,30 th dates of Jan.
Remaining dates stock came from R3.
so problem is stock seems double(Not exactly) for one site(Plant).
i checked in BI and i dont see any stock data for 31st Jan but it is there in R3.
So how to get the data for 31st jan from R3 it is using the 2LIS_03_BX Extractor (Tables - MSEG,BSEG).
i am really stuck up here please help me out..
Thanks in advance,
Regards,
<BMP>

You can get it from LBWE transaction in R/3 side:
for example see below:
Sales and Distribution (SD)          : application 11, 13, 08 (in LBWE T-code)
Materials Management (MM)        : application 03, 02
Logistics Execution (LE)               : application 12
Quality Management                  : application 05
Plant Maintenance (PM)              : application 04, 17
Customer Service (CS)               : application 18
Project System (PS)                   : application 20
SAP Retail                                    : application 40,43,44,45

How to get real time date from Sunny Boy Inverters through SMA Webbox?

Similar Messages

Maybe you are looking for