How to get registered for BBS
Hi
I bought a curve 9320 with which i got a 6 months free Black berry services ( BBS).
For the activation of BBS i have sent a msg BBSFREE at 121 but my services is not activated.
After calling in customer care they told me that they have activated my services on their hand and told me that you will have to register your phone to avail services.
I donno how to register phone to activate my BBS.
Plzzzzzz tell me how to register.
1. This is a user-to-user community support forum. We are not RIM employees, but volunteers who enjoy assisting other users. RIM personnel rarely comment on queries posted here.
2. Who is this you are calling?
3. You have your mobile phone number listed as your "My Mobile Provider" or carrier. Putting your phone number out on the internet on these public forums for the world to see, is not wise. To change that, at the top of this page click on My Settings > Personal Profile > Personal Information, and in the entry block for "Carrier" type the name of your mobile provider.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
HT5051 How do you register for icloud
Ii have a new iPad 2, and I am a new apple user. Apparently when I bought this I bought a cloud!!!! However, I have no idea how to get registered with it, ( if you have to) and/ or how to transfer any documents onto it. Some 'laymen' advice would be good, cheers
You didn't 'buy' iCloud because at basic level it's free.
These pages will guide you through the process:
Get Started with iCloud
http://www.apple.com/icloud/setup/ios.html
iCloud Help
These are the things which iCloud can do:
•Provides one main @me.com email address and up to three 'aliases' (additional addresses).
•Allows you to sync your calendars between your Mac(s) and iOS devices.
•Ditto with contacts
•Ditto with Safari bookmarks
•Provides a conduit which copies photos taken on any one device onto all the others
•Provides a fairly basic photo gallery (populated only from iPhoto for iOS)
•Provides 'Find My iPhone/iPad' to locate a missing device that is able to connect to a network
•Backs up the contents of your iPhone
•Syncs iWork documents (only) between your Mac and your iPhone
•Tracks the location of your friends (only with their permission)
More details with illustrations and videos here:
http://www.apple.com/icloud/what-is.html -
How to get Text for nodes in Tree Structure
Hi Friends,
How to get Text for nodes in Tree Structure
REPORT YFIIN_REP_TREE_STRUCTURE no standard page heading.
I N I T I A L I Z A T I O N
INITIALIZATION.
AUTHORITY-CHECK OBJECT 'ZPRCHK_NEW' :
ID 'YFIINICD' FIELD SY-TCODE.
IF SY-SUBRC NE 0.
MESSAGE I000(yFI02) with SY-TCODE .
LEAVE PROGRAM.
ENDIF.
class screen_init definition create private.
Public section
public section.
class-methods init_screen.
methods constructor.
Private section
private section.
data: container1 type ref to cl_gui_custom_container,
container2 type ref to cl_gui_custom_container,
tree type ref to cl_gui_simple_tree.
methods: fill_tree.
endclass.
Class for Handling Events
class screen_handler definition.
Public section
public section.
methods: constructor importing container
type ref to cl_gui_custom_container,
handle_node_double_click
for event node_double_click
of cl_gui_simple_tree
importing node_key .
Private section
private section.
endclass.
*& Classes implementation
class screen_init implementation.
*& Method INIT_SCREEN
method init_screen.
data screen type ref to screen_init.
create object screen.
endmethod.
*& Method CONSTRUCTOR
method constructor.
data: events type cntl_simple_events,
event like line of events,
event_handler type ref to screen_handler.
create object: container1 exporting container_name = 'CUSTOM_1',
tree exporting parent = container1
node_selection_mode =
cl_gui_simple_tree=>node_sel_mode_multiple.
create object: container2 exporting container_name = 'CUSTOM_2',
event_handler exporting container = container2.
event-eventid = cl_gui_simple_tree=>eventid_node_double_click.
event-appl_event = ' '. "system event, does not trigger PAI
append event to events.
call method tree->set_registered_events
exporting events = events.
set handler event_handler->handle_node_double_click for tree.
call method: me->fill_tree.
endmethod.
*& Method FILL_TREE
method fill_tree.
data: node_table type table of abdemonode,
node type abdemonode.
types: begin of tree_node,
folder(50) type c,
tcode(60) type c,
tcode1(60) type c,
tcode2(60) type c,
text(60) type c,
text1(60) type c,
text2(60) type c,
end of tree_node.
data: wa_tree_node type tree_node,
t_tree_node type table of tree_node.
wa_tree_node-folder = text-001.
wa_tree_node-tcode = text-002.
wa_tree_node-text = 'Creditors ageing'.
wa_tree_node-tcode1 = text-003.
wa_tree_node-text1 = 'GR/IR aging'.
wa_tree_node-tcode2 = text-004.
wa_tree_node-text2 = 'Bank Balance'.
append wa_tree_node to t_tree_node.
clear wa_tree_node .
wa_tree_node-folder = text-005.
wa_tree_node-tcode = text-006.
wa_tree_node-text = 'Creditors ageing'.
wa_tree_node-tcode1 = text-007.
wa_tree_node-text1 = 'Creditors ageing'.
wa_tree_node-tcode2 = text-008.
wa_tree_node-text2 = 'Creditors ageing'.
append wa_tree_node to t_tree_node.
clear wa_tree_node .
wa_tree_node-folder = text-009.
wa_tree_node-tcode = text-010.
wa_tree_node-text = 'Creditors ageing'.
wa_tree_node-tcode1 = text-011.
wa_tree_node-text1 = 'Creditors ageing'.
wa_tree_node-tcode2 = text-012.
wa_tree_node-text2 = 'Creditors ageing'.
append wa_tree_node to t_tree_node.
clear wa_tree_node .
node-hidden = ' '. " All nodes are visible,
node-disabled = ' '. " selectable,
node-isfolder = 'X'. " a folder,
node-expander = ' '. " have no '+' sign forexpansion.
loop at t_tree_node into wa_tree_node.
at new folder.
node-isfolder = 'X'. " a folder,
node-node_key = wa_tree_node-folder.
clear node-relatkey.
clear node-relatship.
node-text = wa_tree_node-folder.
node-n_image = ' '.
node-exp_image = ' '.
append node to node_table.
endat.
at new tcode .
node-isfolder = ' '. " a folder,
node-n_image = '@CS@'. "AV is the internal code
node-exp_image = '@CS@'. "for an airplane icon
node-node_key = wa_tree_node-tcode.
node-text = wa_tree_node-text .
node-relatkey = wa_tree_node-folder.
node-relatship = cl_gui_simple_tree=>relat_last_child.
endat.
append node to node_table.
at new tcode1 .
node-isfolder = ' '. " a folder,
node-n_image = '@CS@'. "AV is the internal code
node-exp_image = '@CS@'. "for an airplane icon
node-node_key = wa_tree_node-tcode1.
node-relatkey = wa_tree_node-folder.
node-relatship = cl_gui_simple_tree=>relat_last_child.
node-text = wa_tree_node-text1.
endat.
append node to node_table.
at new tcode2 .
node-isfolder = ' '. " a folder,
node-n_image = '@CS@'. "AV is the internal code
node-exp_image = '@CS@'. "for an airplane icon
node-node_key = wa_tree_node-tcode2.
node-relatkey = wa_tree_node-folder.
node-relatship = cl_gui_simple_tree=>relat_last_child.
node-text = wa_tree_node-text2.
endat.
append node to node_table.
endloop.
call method tree->add_nodes
exporting table_structure_name = 'ABDEMONODE'
node_table = node_table.
endmethod.
endclass.
*& Class implementation
class screen_handler implementation.
*& Method CONSTRUCTOR
method constructor.
create object: HTML_VIEWER exporting PARENT = CONTAINER,
LIST_VIEWER exporting I_PARENT = CONTAINER.
endmethod.
*& Method HANDLE_NODE_DOUBLE_CLICK
method handle_node_double_click.
case node_key(12).
when 'Creditors'.
submit YFIIN_REP_CREADITORS_AGING via selection-screen and return.
when 'Vendor'.
submit YFIIN_REP_VENDOR_OUTSTANDING via selection-screen and return.
when 'Customer'.
submit YFIIN_REP_CUSTOMER_OUTSTANDING via selection-screen and
return.
when 'GR/IR'.
submit YFIIN_REP_GRIR_AGING via selection-screen and return.
when 'Acc_Doc_List'.
submit YFIIN_REP_ACCOUNTINGDOCLIST via selection-screen and return.
when 'Bank Bal'.
submit YFIIN_REP_BANKBALANCE via selection-screen and return.
when 'Ven_Cus_Dtl'.
submit YFIIN_REP_VENDORCUST_DETAIL via selection-screen and return.
when 'G/L_Open_Bal'.
submit YFIIN_REP_OPENINGBALANCE via selection-screen and return.
when 'Usr_Authn'.
submit YFIIN_REP_USERAUTHRIZATION via selection-screen and return.
endcase.
endmethod.
endclass.
Program execution ************************************************
load-of-program.
call screen 9001.
at selection-screen.
Dialog Modules PBO
*& Module STATUS_9001 OUTPUT
text
module status_9001 output.
set pf-status 'SCREEN_9001'.
set titlebar 'TIT_9001'.
call method screen_init=>init_screen.
endmodule. " STATUS_9001 OUTPUT
Dialog Modules PAI
*& Module USER_COMMAND_9001 INPUT
text
module user_command_9001 input.
endmodule. " USER_COMMAND_9001 INPUT
*& Module exit_9001 INPUT
text
module exit_9001 input.
case sy-ucomm.
when 'EXIT'.
set screen 0.
endcase.
endmodule.
exit_9001 INPUTyou can read the table node_table with nody key value which imports when docubble click the the tree node (Double clifk event).
Regards,
Gopi .
Reward points if helpfull. -
How do people register for more than one person on a form?
We had a lot of complaints last year from organizations who sent several employees to our training. It took a long time for them to process these one at a time. How do people register for more than one person on a form?
Hi thearcca,
This entirely depends on the form you create, you can add multiple choice button and ask for the no. of employees the organization wants to register.
Also, you can add corresponding text field for the names.
Thanks,
Vikrantt Singh -
How to get classification for a given material and material type in MM
Hello Friends,
One of my developer colleagues is struggling to find out : how to get classification for a given material and material type in MM?
He is looking for probable table and table fields to Select from.
I would appreciate seriously any help in this regard.
~Yours SincerelyHi
Below given the flow and table details for a given class and class type.
- Table KLAH --> This contains the "Internal class no" [ for the given Class & Class type ]
- Table KSML --> This contains the " internal character numbers " [ nothing but characteristics attached to the class ] , which can be fetched with the above fetched internal class no
- Table AUSP --> This table contains the objects ( material ) attached to the internal characters of that class
- Table CABNT --> This table contains the "Description" for the internal character numbers.
- award points if this is ok -
How to get LASTDAY for each and every month between given dates..
Hi Friend,
I have a doubt,How to get LASTDAY for each and every month between given dates..
for ex:
My Input will be look like this
from date = 12-01-2011
To date = 14-04-2011
And i need an output like
31-01-2011
28-02-2011
31-03-2011
is there any way to achieve through sql query in oracle
Advance thanks for all helping friendsHere's a 8i solution :
select add_months(
trunc(
to_date('12-01-2011','DD-MM-YYYY')
,'MM'
, rownum ) - 1 as results
from all_objects
where rownum <= ( months_between( trunc(to_date('14-04-2011','DD-MM-YYYY'), 'MM'),
trunc(to_date('12-01-2011','DD-MM-YYYY'), 'MM') ) );
The above two query is worked in oracle 11GActually the first query I posted is not correct.
It should work better with
months_between(
trunc(to_date(:dt_end,'DD-MM-YYYY'),'MM'),
trunc(to_date(:dt_start,'DD-MM-YYYY'),'MM')
)Edited by: odie_63 on 12 janv. 2011 13:53
Edited by: odie_63 on 12 janv. 2011 14:11 -
How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?
If you bought a CC for team, you can log in at http://adobe.com and insert the e-mail that you gave at the moment at the purchase and than you can manage and see you product/plan/team.
If I was not clear you can use the following link to help you solving your issue:
Creative Cloud Help | Manage your Creative Cloud for teams membership
If your not clear about this situation, contact with an agent of Adobe, by chat or phone. Use the following link to see the type of support you have on this matter:
http://adobe.com/getsupport
I think this will help you.
Regards -
Re: how to get apps for iphone 3g 4.2.1
Re: how to get apps for iphone 3g 4.2.1 all apps support higher version help....
Sep 24, 2013 6:34 AM (in response to Rajmit)
I still have an old 3G which I use mostly as a ipod/radio. By accident I found you can overide the i-tunes block.
1. Select Apps in Apps store icon on the phone.
2. Choose App to download
3. At "Instal" button press it QUICKLY in blocks of 3 presses, keep doing this until it overides the i-tune warning, then if there were legacy versions for os 4.2.1 it says something like "this app is for os 5 or above", but gives you a choice to download an older version. Select this.
Sometimes it says the Apps is for newer hardware, requiring motion sensors, front camera's etc.. just got to accept these ones don't work on legacy hardware.
4. Download does not work for all Apps, esp. newer ones written after os 4.21 or if the developer doesn't have the vintage apps archived- e.g. Instagram downloads, but won't run (wants to update), or WSJ and Barrons stalls and goes through a download loop.
I am not making this up, as I bought this old 3g unit on e-bay, after a complete factory reset I now have:
- Tune-in, FB, Pandora,Skype, Twitter, Bloomberg, MSNBC, Forbes, Marketwatch, Viber, amongst a host of other news apps like LATimes.
Some Apps will download ok, and then at activation says its too old and no longer supported e.g Whats App.
Otherwise, good luck. Tune-in, Pandora, Skype and Twitter is all I need to keep me happy with an old unit, even though I've got newer hardware. Never let anything die unnaturally.I still have an old 3G which I use mostly as a ipod/radio. By accident I found you can overide the i-tunes block.
1. Select Apps in Apps store icon on the phone.
2. Choose App to download
3. At "Instal" button press it QUICKLY in blocks of 3 presses, keep doing this until it overides the i-tune warning, then if there were legacy versions for os 4.2.1 it says something like "this app is for os 5 or above", but gives you a choice to download an older version. Select this.
Sometimes it says the Apps is for newer hardware, requiring motion sensors, front camera's etc.. just got to accept these ones don't work on legacy hardware.
4. Download does not work for all Apps, esp. newer ones written after os 4.21 or if the developer doesn't have the vintage apps archived- e.g. Instagram downloads, but won't run (wants to update), or WSJ and Barrons stalls and goes through a download loop.
I am not making this up, as I bought this old 3g unit on e-bay, after a complete factory reset I now have:
- Tune-in, FB, Pandora,Skype, Twitter, Bloomberg, MSNBC, Forbes, Marketwatch, Viber, amongst a host of other news apps like LATimes.
Some Apps will download ok, and then at activation says its too old and no longer supported e.g Whats App.
Otherwise, good luck. Tune-in, Pandora, Skype and Twitter is all I need to keep me happy with an old unit, even though I've got newer hardware. Never let anything die unnaturally. -
[JS][CS3]how to get refrence for source file
Hi All
I am new and learning javascript Gradually Could any one help on this as i do have a code for load style but don't know how to get refrence for "source file" and "targetDoc"
targetDoc.importStyles(charImport, sourceFile, clashPolicy);
targetDoc.importStyles(paraImport, sourceFile, clashPolicy);
Can any one figure it out
Many ThanksI'm not sure what you are trying to achieve, could you please elaborate?
Do you want to load all the styles from one document into all 100 documents, or do you want all the styles from the 100 documents into 1 document or what is the goal?
The following will let you choose a folder of files, open each of the files in it and import the styles from source document. It is not a complete script, make sure to test and modify before running on anything else than test files :-)
var MyFolderWithFiles = Folder.selectDialog ("Choose a folder");
var sourceFile = File.openDialog("Choose the styles source");
var myFiles = MyFolderWithFiles.getFiles("*.indd");
for(i = 0; i < myFiles.length; i++) {
theFile = myFiles[i];
app.scriptPreferences.userInteractionLevel = UserInteractionLevels.NEVER_INTERACT;
var targetDoc = app.open(theFile, true);
app.scriptPreferences.userInteractionLevel = UserInteractionLevels.INTERACT_WITH_ALL;
targetDoc.importStyles(ImportFormat.CHARACTER_STYLES_FORMAT, sourceFile, GlobalClashResolutionStrategy.LOAD_ALL_WITH_OVERWRITE);
targetDoc.importStyles(ImportFormat.PARAGRAPH_STYLES_FORMAT, sourceFile, GlobalClashResolutionStrategy.LOAD_ALL_WITH_OVERWRITE);
targetDoc.close(SaveOptions.YES);
Thomas B. Nielsen
http://www.lund-co.dk -
I have canceled my account same day and joining because the convert PDF to word did not convert correctly how to get credit for cancelled membership
You need to contact Adobe Customer Support :
They will check and assist you. (Live Chat)
Contact Customer Care -
How do I register for iMessage
How do i register for imessage. it is not working for me.
Do you have an AppleID? When you go to iMessage it should ask for your AppleID for registration.
-
HT3529 How do i register for imessage on my ipod touch?
How do you register for Imessage on the Ipod touch?
Click on the app on your iPod while connected to wifi and follow the steps
-
How to get appstore for mac os x 10.4.11?
how to get appstore for mac os x 10.4.11?
Go to Apple menu -> About this Mac. If you have a G3, G4, or G5 processor you can't access the App Store at all.
If you have an Intel Mac, updating to 10.6.6 is described here:
https://discussions.apple.com/docs/DOC-2455 -
Hi,
How to get Reports for specific User that how many password has been reset using FIM SSPR in FIM 2010 R2 SSPR
Regards
Anil KumarHello there Anil,
A simple way to quickly get a overview is to look at the request history within the portal environment (note that this will expire in a few day based on your environment, after that you would need to FIM Reporting Module - but you could increase this to
maybe 60 days to so, watch the DB size).
To do this you could create some custom search scopes of do some custom queries. The creator of the SSPR activities always has the same GUID so you can use that so search.
In your search scope you can use the following XPath to play with.
- All Password Reset Requests - /Request[Creator='b0b36673-d43b-4cfa-a7a2-aff14fd90522' and Operation='Put']
- All Completed Password Reset Requests - /Request[Creator='b0b36673-d43b-4cfa-a7a2-aff14fd90522' and RequestStatus=‘Completed']
You can play with the "RequestStatus".
Hope this helps.
Almero Steyn (http://www.puttyq.com) [If a post helps to resolve your issue, please click the "Mark as Answer" of that post or "Helpful" button of that post. By marking a post as Answered or Helpful, you help others find the answer
faster.] -
My mac OS X did not come with GarageBand, how do get it for free?
My mac OS X did not come with GarageBand, how do get it for free?
I don't want to pay for garageband because it should have come with my laptop but it didn't. I got it used so that might be the problem. Also I installed leopard on it. I'm not sure if that would affect it at all. Please help. Thanks.Okay, so you bought the machines used?
What OS version was on it when you bought it?
You bought Snow Leopard (10.6.x) and installed it?
The original version is important because there were some OS versions that did not include iLife (incl. Garageband) - you had to get it separately. And, the retail Snow Leopard disk does not include it.
So, if that is correct, then it doesn't have to have it installed. In any case, you can still buy a retail version of iLife with the full suite of apps from online retailers; either version 09 or 11 will work with your OS. Or you can just buy Garageband at the app store.
Maybe you are looking for
-
Looking for simple graphics editor
PHOTOSHOP (even elements) is way too complicated for little old me - can anyone recommend a simple program - a graphics editor - the main thing I need to do is place a piece of text over an existing image. is there a little apple applet that does som
-
Outlook will no longer sync with device
I'm hoping someone can help me figure this out. I have Outlook 2003, and have been able to sync it with my Verizon Tour in the past. Two days ago, it stopped syncing the calendar portion. The address book and memo pad are still syncing like normal
-
Why can't I play some of my songs?
I just updated to iOS 5, and as I was scrolling through my songs on my iPod touch, a large majority of the songs names are tinted in grey, and cannot be played. Why is this? And how can I fix it? Anyone?
-
HT4906 Iphoto not able to link with icloud- more $$
So is this just another revenue stream for apple- I have to pay for a new Iphoto download - no update showing. Is that correct?
-
ABAP Objects: Private variable with reference to global internal table
Hello. I want an object that can hold a private reference to a global internal table so that when one of it's methods are invoked, the global table contents are modified. Simplification of scenario: class myObject definition. public section. me