How to get report for cost estimates material cost only

Hi Gurus,
We have requirement in sales order costing that we need to develope report which shows only Material cost for all BOM levels.
Normally at lower levels cost of Material and activity cost will be treated as Material cost for next level. Here I want to consider only material cost not activity cost at lower levels
Pls suggest the logic and tables for exploding BOM and fetching material cost only.
Thanks
Sneha

Sneha
If you tick the "Roll up" indicatorfor each cost component in Cost Comp Str OKTZ, then overheads do not get added to the material cost... This is my understanding about it.. Is it behaving some thing different in your case??
br, Ajay M

Similar Messages

How to get classification for a given material and material type in MM

Hello Friends,
One of my developer colleagues is struggling to find out : how to get classification for a given material and material type in MM?
He is looking for probable table and table fields to Select from.
I would appreciate seriously any help in this regard.
~Yours Sincerely

Hi
Below given the flow and table details for a given class and class type.
- Table KLAH --> This contains the "Internal class no" [ for the given Class & Class type ]
- Table KSML --> This contains the " internal character numbers " [ nothing but characteristics attached to the class ] , which can be fetched with the above fetched internal class no
- Table AUSP --> This table contains the objects ( material ) attached to the internal characters of that class
- Table CABNT --> This table contains the "Description" for the internal character numbers.
- award points if this is ok

How to get Reports for specific User that how many password has been reset using FIM SSPR in FIM 2010 R2 SSPR

Hi,
How to get Reports for specific User that how many password has been reset using FIM SSPR in FIM 2010 R2 SSPR
Regards
Anil Kumar

Hello there Anil,
A simple way to quickly get a overview is to look at the request history within the portal environment (note that this will expire in a few day based on your environment, after that you would need to FIM Reporting Module - but you could increase this to
maybe 60 days to so, watch the DB size).
To do this you could create some custom search scopes of do some custom queries. The creator of the SSPR activities always has the same GUID so you can use that so search.
In your search scope you can use the following XPath to play with.
- All Password Reset Requests - /Request[Creator='b0b36673-d43b-4cfa-a7a2-aff14fd90522' and Operation='Put']
- All Completed Password Reset Requests - /Request[Creator='b0b36673-d43b-4cfa-a7a2-aff14fd90522' and RequestStatus=‘Completed']
You can play with the "RequestStatus".
Hope this helps.
Almero Steyn (http://www.puttyq.com) [If a post helps to resolve your issue, please click the "Mark as Answer" of that post or "Helpful" button of that post. By marking a post as Answered or Helpful, you help others find the answer
faster.]

How to get report for deleted line items from sales orders

Dear FRIENDS,
please infirm the t.code or report for viewing the deleted line items from sales ordrers.
Kindly do the neeedful.
regards,
N.M.PAWAR

Hi,
With transaction SE16 you can view table CDHDR for header changes and
CDPOS for item changes. This includes deletion.
OR
GO to VA03 - Display Sales order -> Put order no : don't press enterbutton. -> Go to Enviornment -> changes -> You will get details
Date ItmNo. SLNo Action
Hope this help please close the thread if answers

How we can get report for system shutdown for perticular year.

Dear Friend,
How we can get report for system shutdown for perticular year.
i.e. i want to know at what time and what date system has been shutdown for ther of 2006.
Thanks,
Sachin

Dear Sir,
Thanks,
But from system log file SM21 i have got only the time not date on which it has been shutdown and restart.
And another thing is that 15 dats before Log file data is atomatically deleted, so cant get it back.
Can you provide me is any another solution? i.e by heating perticular T code report come>
Sachin

Customized report for cost centers by different cost centers

Hi All,
Customized report for cost centers by different cost centers:
I need to build a customised report with the following format:
Cost element columns | Cost center 1 | cost center 2 | cost center 3, etc -> dynamic cost center columns
CE 1 .............................. amount xxx | . amount xxx | .. amount xxx
CE 2 .............................. amount xxx | . amount xxx | .. amount xxx
CE 3 .............................. amount xxx | . amount xxx | .. amount xxx
CE 3 .............................. amount xxx | . amount xxx | .. amount xxx
User selection screen:
Controlling are:
Fiscal Year:
From period to period:
cost center group ... <range of CC group> or
cost center value ... <range of CC value>
Questions:
From the above selection screens, I need to pull out all the data stored in the table: COEP
But, the problem is that inside this table, there is no cost center or cost center group stored; and therefore the program should be smart enough to pull out all the documents from the table: COEP and then make sure that the document / list of documents that pull out should belongs to the cost center or cost center group, as well as date range.
KIndly advise how functional description/design should be built in order ABAPer can understand the requirement?
What should be the tables to refer in order meet the requirement.
Similar Standard SAP cost center report should be S_ALR_87013611 - Cost Centers: Actual/Plan/Variance, but this report read from many tables.

Hi,
Please find the logic below & try it at your system-
Here cost center group is not possible (also i not checked it so do it on your own simultaneously i am trying the same).
Use Table BSEG-> in bseg give the cost center-> with the help of cost center find the account number (field HKONT)-> take this GL account number & got to table COEP-> in this give the GL account number at field 'offsetting account' (field GKONT) & you will get the line item.
Try it & let me know if you have any question.
Thanks

Report for Comparison of Material Qty

Hi All,
I need to Develop an Interactive report for Comparison of Material Qty. ordered through Purchase requisition, ordered material through PO and corresponding Material Receipt report.
Can Someone Give a brief description about this & fields tcode & tables regarding this report.A sample code would be much appreciated.
Thanks & regards,
Ravi S

To get the material number combined with the PO text you will need the help of an ABAP programmer. The programmer can create a report for you using the function module READ_TEXT in the function group STXD. The tables to use are:
STXH - STXD SAPscript text file header
STXL - STXD SAPscript text file lines
The selection screen should have at least the following:
OBJECT - STXH-TDOBJECT
NAME - STXH-TDNAME
LANGUAGE - STXH-TDSPRAS
TEXTID - STXH-TDID
You find the information for these fields by going to the PO text entry screen and displaying the header information under Goto -> Header. For materials, the object is MATERIAL, the name is "material number", the language is "EN", and the text ID is BEST. You can use this program to get long text in lots of places like information records, purchase order texts, etc.
Hope this helps.

I AM DEVELOPING THE Z-REPORT FOR SHELF AGEING MATERIAL

HI
USER WANTS Z-REPORT FOR SHELF AGEING MATERIAL WITH STOCK QTY AND STOCK VALUE.
I WANT TABLE NAME FOR SHELF AGEING MATERIAL REPORT.
SPECIALLY, FOR DAYS (REMAINING SHELF LIFE PERIOD FOR MATERIAL IN DYAS)

Hi,
Ask the abaper to write an query from the table S032 there you can find the option of last good receipt date and the last goods issue issue date.
consider the various good mvt in between these dates calcuate the diffence betwee the current date and the last good issue date, so that you can abel to get the stock list that is not moving for more than 60 days,120 days etc
You can also use MC46, MC50, MB5M - expiration date list . In case if that does not solve their requirement then you need take logic from client and you need to develop own report
pherasath

How 2 creat report for displaying the details of a Delivery Document using

how to create report for displaying the details of a Delivery Document using the tables LIKP, LIPS
thank you
regards,
jagrut bharatkumar shukla
points will be rewarded

HI
I AM GIVING YOU MY DELIVERY DOCUMENT CODE...MODIFY IT ACCORDING TO YOUR REQUIREMENT
*& Report ZDELIVERY                                *
report zdelivery message-id z9bhu          .
types: begin of t_likp,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
*           LFDAT TYPE LIKP-LFDAT,      "Delevery Date
*           WAERK TYPE LIKP-WAERK,      "Currency
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
       end of t_likp.
types: begin of t_lips,
           vbeln type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,
*           MEINS TYPE LIPS-MEINS,      "Base Unit of Measure
           vgbel type lips-vgbel,      "Doc no of the reference document
        end of t_lips.
types: begin of t_vbpa,
           vbeln type vbpa-vbeln,      "SD DocumenT Number
           posnr type vbpa-posnr,      "Item number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,      "Customer Number 1
       end of t_vbpa.
types: begin of t_kna1,
           kunnr type kna1-kunnr,      "Customer Number 1
           name1 type kna1-name1,      "Name 1
           ort01 type kna1-ort01,      "City
           adrnr type kna1-adrnr,      "Address
       end of t_kna1.
types: begin of t_li_vbpa,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
*           LFDAT TYPE LIKP-LFDAT,      "Delevery Date
*           WAERK TYPE LIKP-WAERK,      "Currency
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
           vbeln1 type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,      "Net Price
*           MEINS TYPE LIPS-MEINS,      "Base Unit of Measure
           vgbel type lips-vgbel,      "Doc no of the reference document
           vbeln3 type vbpa-vbeln,     "SD DocumenT Number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,      "Customer Number 1
       end of t_li_vbpa.
types: begin of t_final,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
           vbeln1 type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,      "Net Price
           vgbel type lips-vgbel,      "Doc no of the reference document
           vbeln3 type vbpa-vbeln,     "SD DocumenT Number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,     "Customer Number 1
           name1 type kna1-name1,      "Name 1
           ort01 type kna1-ort01,      "City
           adrnr1 type kna1-adrnr,     "Address
           name2 type kna1-name1,      "Name 1
           ort02 type kna1-ort01,      "City
           adrnr2 type kna1-adrnr,     "Address
           name3 type kna1-name1,      "Name 1
           ort03 type kna1-ort01,      "City
           adrnr3 type kna1-adrnr,     "Address
       end of t_final.
*            D A T A D E C L A R A T I O N
*&*********Internal Table Declaration****************&*
data: it_likp type standard table of t_likp.
data: it_lips type standard table of t_lips.
data: it_vbpa type standard table of t_vbpa.
data: it_kna1 type standard table of t_kna1.
data: it_li_vbpa type standard table of t_li_vbpa.
data: it_li_vbpa_temp type standard table of t_li_vbpa.
data: it_final type standard table of t_final.
*&*********Work Area Declaration********************&*
data: wa_likp type t_likp.
data: wa_lips type t_lips.
data: wa_vbpa type t_vbpa.
data: wa_kna1 type t_kna1.
data: wa_li_vbpa type t_li_vbpa.
data: wa_li_vbpa_temp type t_li_vbpa.
data: wa_final type t_final.
*&*********Data Declaration************************&*
data: d_vbeln type likp-vbeln.
data: flag type i value 0.
*           S E L E C T I O N S C R E E N   D E C L A R A T I O N
selection-screen begin of block block2 with frame title text-001.
select-options: s_vbeln for d_vbeln obligatory.    "Delivery no
selection-screen end of block block2.
*            A T S E L E C T I O N - S C R E E N   E V E N T S
*AT SELECTION-SCREEN.
*PERFORM VALIDATE_DATA.
*            S T A R T   O F S E L E C T I O N     E V E N T S
start-of-selection.
perform fetch_data.
perform merge_data_kna1.
*INCLUDE Z9BT_SH_***4_FORMS.
call function 'OPEN_FORM'
exporting
*   APPLICATION                       = 'TX'
*   ARCHIVE_INDEX                     =
*   ARCHIVE_PARAMS                    =
    device                            = 'PRINTER'
*   DIALOG                            = 'X'
*   FORM                              = ' '
   language                          = sy-langu
*   OPTIONS                           =
*   MAIL_SENDER                       =
*   MAIL_RECIPIENT                    =
*   MAIL_APPL_OBJECT                  =
*   RAW_DATA_INTERFACE                = '*'
*   SPONUMIV                          =
* IMPORTING
*   LANGUAGE                          =
*   NEW_ARCHIVE_PARAMS                =
*   RESULT                            =
exceptions
   canceled                          = 1
   device                            = 2
   form                              = 3
   options                           = 4
   unclosed                          = 5
   mail_options                      = 6
   archive_error                     = 7
   invalid_fax_number                = 8
   more_params_needed_in_batch       = 9
   spool_error                       = 10
   codepage                          = 11
   others                            = 12
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
sort it_final by vbeln.
loop at it_final into wa_final.
call function 'START_FORM'
exporting
*   ARCHIVE_INDEX          =
   form                   = 'Z9BT_DELIVERY'
   language               = sy-langu
*   STARTPAGE              = ' '
*   PROGRAM                = ' '
*   MAIL_APPL_OBJECT       =
* IMPORTING
*   LANGUAGE               =
exceptions
   form                   = 1
   format                 = 2
   unended                = 3
   unopened               = 4
   unused                 = 5
   spool_error            = 6
   codepage               = 7
   others                 = 8
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'WRITE_FORM'
exporting
   element                        = 'ITEM_LIST'
   function                       = 'SET'
   type                           = 'BODY'
   window                         = 'MAIN'
* IMPORTING
*   PENDING_LINES                  =
* EXCEPTIONS
*   ELEMENT                        = 1
*   FUNCTION                       = 2
*   TYPE                           = 3
*   UNOPENED                       = 4
*   UNSTARTED                      = 5
*   WINDOW                         = 6
*   BAD_PAGEFORMAT_FOR_PRINT       = 7
*   SPOOL_ERROR                    = 8
*   CODEPAGE                       = 9
*   OTHERS                         = 10
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'END_FORM'
* IMPORTING
*   RESULT                         =
exceptions
   unopened                       = 1
   bad_pageformat_for_print       = 2
   spool_error                    = 3
   codepage                       = 4
   others                         = 5
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endloop.
call function 'CLOSE_FORM'
* IMPORTING
*   RESULT                         =
*   RDI_RESULT                     =
* TABLES
*   OTFDATA                        =
exceptions
   unopened                       = 1
   bad_pageformat_for_print       = 2
   send_error                     = 3
   spool_error                    = 4
   codepage                       = 5
   others                         = 6
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
*&      Form VALIDATE_DATA
*       text
* --> p1        text
* <-- p2        text
form validate_data .
select single vbeln into wa_likp-vbeln
                    from likp where vbeln in s_vbeln.
append wa_likp to it_likp.
if sy-subrc <> 0.
flag = 1.
endif.
endform.                    " VALIDATE_DATA
*&      Form FETCH_DATA
*       text
* --> p1        text
* <-- p2        text
form fetch_data .
select a~vbeln
       a~erdat
       a~kunnr
       a~kunag
       a~traty
       b~vbeln
       b~posnr
       b~matnr
       b~arktx
       b~lfimg
       b~netpr
       b~vgbel
       c~vbeln
       c~parvw
       c~kunnr
         into table it_li_vbpa
                from likp as a
                left outer join lips as b on a~vbeln = b~vbeln
                inner join vbpa as c on b~vgbel = c~vbeln
                where a~vbeln in s_vbeln and
                c~parvw = 'RE'.
endform.                    " FETCH_DATA
*&      Form MERGE_DATA_KNA1
*       text
* --> p1        text
* <-- p2        text
form merge_data_kna1 .
if it_li_vbpa[] is not initial.
it_li_vbpa_temp[] = it_li_vbpa[].
sort it_li_vbpa_temp by kunnr.
delete adjacent duplicates from it_li_vbpa_temp comparing kunnr.
loop at it_li_vbpa into wa_li_vbpa.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunag.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunnrb.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
endloop.
endif.
if it_li_vbpa_temp[] is not initial.
select kunnr
        name1
        ort01
        adrnr into table it_kna1 from kna1
                    for all entries in it_li_vbpa_temp
                    where kunnr = it_li_vbpa_temp-kunnr.
endif.
loop at it_li_vbpa into wa_li_vbpa .
wa_final-vbeln = wa_li_vbpa-vbeln.
wa_final-erdat = wa_li_vbpa-erdat.
*it_final-LFART = it_li_vbpa-LFART.
wa_final-kunnr = wa_li_vbpa-kunnr.
wa_final-kunag = wa_li_vbpa-kunag.
*it_final-VSTEL = it_li_vbpa-VSTEL.
wa_final-traty = wa_li_vbpa-traty.
wa_final-vbeln1 = wa_li_vbpa-vbeln.
wa_final-posnr = wa_li_vbpa-posnr.
wa_final-matnr = wa_li_vbpa-matnr.
wa_final-arktx = wa_li_vbpa-arktx.
wa_final-lfimg = wa_li_vbpa-lfimg.
wa_final-netpr = wa_li_vbpa-netpr.
*wa_final-GEWEI = it_li_vbpa-GEWEI.
*it_final-VOLUM = it_li_vbpa-VOLUM.
*it_final-VOLEH = it_li_vbpa-VOLEH.
wa_final-vgbel = wa_li_vbpa-vgbel.
wa_final-vbeln3 = wa_li_vbpa-vbeln.
*wa_final-PARVW = wa_li_vbpa-PARVW.
wa_final-kunnrb = wa_li_vbpa-kunnrb.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnr.
if sy-subrc = 0.
wa_final-name1 = wa_kna1-name1.
wa_final-ort01 = wa_kna1-ort01.
wa_final-adrnr1 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunag.
if sy-subrc = 0.
wa_final-name2 = wa_kna1-name1.
wa_final-ort02 = wa_kna1-ort01.
wa_final-adrnr2 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnrb.
if sy-subrc = 0.
wa_final-name3 = wa_kna1-name1.
wa_final-ort03 = wa_kna1-ort01.
wa_final-adrnr3 = wa_kna1-adrnr.
endif.
append wa_final to it_final.
clear wa_final.
endloop.
endform.

How to get Text for nodes in Tree Structure

Hi Friends,
How to get Text for nodes in Tree Structure
REPORT YFIIN_REP_TREE_STRUCTURE no standard page heading.
                   I N I T I A L I Z A T I O N
INITIALIZATION.
AUTHORITY-CHECK OBJECT 'ZPRCHK_NEW' :
                  ID 'YFIINICD' FIELD SY-TCODE.
IF SY-SUBRC NE 0.
    MESSAGE I000(yFI02) with SY-TCODE .
    LEAVE PROGRAM.
ENDIF.
class screen_init definition create private.
Public section
public section.
    class-methods init_screen.
    methods constructor.
Private section
private section.
    data: container1 type ref to cl_gui_custom_container,
          container2 type ref to cl_gui_custom_container,
          tree type ref to cl_gui_simple_tree.
    methods: fill_tree.
endclass.
Class for Handling Events
class screen_handler definition.
Public section
public section.
    methods: constructor importing container
               type ref to cl_gui_custom_container,
             handle_node_double_click
               for event node_double_click
               of cl_gui_simple_tree
               importing node_key .
Private section
private section.
endclass.
*&                        Classes implementation
class screen_init implementation.
*&                        Method INIT_SCREEN
method init_screen.
    data screen type ref to screen_init.
    create object screen.
endmethod.
*&                        Method CONSTRUCTOR
method constructor.
    data: events type cntl_simple_events,
          event like line of events,
          event_handler type ref to screen_handler.
    create object: container1 exporting container_name = 'CUSTOM_1',
                   tree exporting parent = container1
                     node_selection_mode =
            cl_gui_simple_tree=>node_sel_mode_multiple.
    create object: container2 exporting container_name = 'CUSTOM_2',
    event_handler exporting container = container2.
event-eventid = cl_gui_simple_tree=>eventid_node_double_click.
    event-appl_event = ' '.   "system event, does not trigger PAI
    append event to events.
    call method tree->set_registered_events
         exporting events = events.
    set handler event_handler->handle_node_double_click for tree.
     call method: me->fill_tree.
endmethod.
*&                        Method FILL_TREE
method fill_tree.
    data: node_table type table of abdemonode,
          node type abdemonode.
types:    begin of tree_node,
          folder(50) type c,
          tcode(60) type c,
          tcode1(60) type c,
          tcode2(60) type c,
          text(60) type c,
          text1(60) type c,
          text2(60) type c,
          end of tree_node.
data: wa_tree_node type tree_node,
            t_tree_node type table of tree_node.
wa_tree_node-folder = text-001.
wa_tree_node-tcode = text-002.
wa_tree_node-text = 'Creditors ageing'.
wa_tree_node-tcode1 = text-003.
wa_tree_node-text1 = 'GR/IR aging'.
wa_tree_node-tcode2 = text-004.
wa_tree_node-text2 = 'Bank Balance'.
append wa_tree_node to t_tree_node.
clear wa_tree_node .
wa_tree_node-folder = text-005.
wa_tree_node-tcode = text-006.
wa_tree_node-text = 'Creditors ageing'.
wa_tree_node-tcode1 = text-007.
wa_tree_node-text1 = 'Creditors ageing'.
wa_tree_node-tcode2 = text-008.
wa_tree_node-text2 = 'Creditors ageing'.
append wa_tree_node to t_tree_node.
clear wa_tree_node .
wa_tree_node-folder = text-009.
wa_tree_node-tcode = text-010.
wa_tree_node-text = 'Creditors ageing'.
wa_tree_node-tcode1 = text-011.
wa_tree_node-text1 = 'Creditors ageing'.
wa_tree_node-tcode2 = text-012.
wa_tree_node-text2 = 'Creditors ageing'.
append wa_tree_node to t_tree_node.
clear wa_tree_node .
node-hidden = ' '.                 " All nodes are visible,
    node-disabled = ' '.               " selectable,
    node-isfolder = 'X'.                                    " a folder,
    node-expander = ' '.               " have no '+' sign forexpansion.
    loop at t_tree_node into wa_tree_node.
      at new folder.
        node-isfolder = 'X'.                      " a folder,
        node-node_key = wa_tree_node-folder.
               clear node-relatkey.
        clear node-relatship.
        node-text = wa_tree_node-folder.
        node-n_image =   ' '.
        node-exp_image = ' '.
        append node to node_table.
      endat.
     at new tcode .
        node-isfolder = ' '.                          " a folder,
        node-n_image =   '@CS@'.       "AV is the internal code
        node-exp_image = '@CS@'.       "for an airplane icon
        node-node_key = wa_tree_node-tcode.
         node-text = wa_tree_node-text .
                 node-relatkey = wa_tree_node-folder.
        node-relatship = cl_gui_simple_tree=>relat_last_child.
      endat.
      append node to node_table.
    at new tcode1 .
        node-isfolder = ' '.                          " a folder,
        node-n_image =   '@CS@'.       "AV is the internal code
        node-exp_image = '@CS@'.       "for an airplane icon
        node-node_key = wa_tree_node-tcode1.
                 node-relatkey = wa_tree_node-folder.
        node-relatship = cl_gui_simple_tree=>relat_last_child.
          node-text = wa_tree_node-text1.
     endat.
      append node to node_table.
       at new tcode2 .
        node-isfolder = ' '.                          " a folder,
        node-n_image =   '@CS@'.       "AV is the internal code
        node-exp_image = '@CS@'.       "for an airplane icon
        node-node_key = wa_tree_node-tcode2.
                 node-relatkey = wa_tree_node-folder.
        node-relatship = cl_gui_simple_tree=>relat_last_child.
        node-text = wa_tree_node-text2.
     endat.
      append node to node_table.
    endloop.
    call method tree->add_nodes
         exporting table_structure_name = 'ABDEMONODE'
                   node_table = node_table.
endmethod.
endclass.
*&                        Class implementation
class screen_handler implementation.
*&                        Method CONSTRUCTOR
method constructor.
   create object: HTML_VIEWER exporting PARENT = CONTAINER,
                  LIST_VIEWER exporting I_PARENT = CONTAINER.
endmethod.
*&                 Method HANDLE_NODE_DOUBLE_CLICK
method handle_node_double_click.
case node_key(12).
when 'Creditors'.
submit YFIIN_REP_CREADITORS_AGING via selection-screen and return.
when 'Vendor'.
submit YFIIN_REP_VENDOR_OUTSTANDING via selection-screen and return.
when 'Customer'.
submit YFIIN_REP_CUSTOMER_OUTSTANDING via selection-screen and
return.
when 'GR/IR'.
submit YFIIN_REP_GRIR_AGING via selection-screen and return.
when 'Acc_Doc_List'.
submit YFIIN_REP_ACCOUNTINGDOCLIST via selection-screen and return.
when 'Bank Bal'.
submit YFIIN_REP_BANKBALANCE via selection-screen and return.
when 'Ven_Cus_Dtl'.
submit YFIIN_REP_VENDORCUST_DETAIL via selection-screen and return.
when 'G/L_Open_Bal'.
submit YFIIN_REP_OPENINGBALANCE via selection-screen and return.
when 'Usr_Authn'.
submit YFIIN_REP_USERAUTHRIZATION via selection-screen and return.
endcase.
endmethod.
endclass.
Program execution ************************************************
load-of-program.
call screen 9001.
at selection-screen.
Dialog Modules PBO
*&      Module STATUS_9001 OUTPUT
      text
module status_9001 output.
set pf-status 'SCREEN_9001'.
set titlebar 'TIT_9001'.
call method screen_init=>init_screen.
endmodule.                 " STATUS_9001 OUTPUT
Dialog Modules PAI
*&      Module USER_COMMAND_9001 INPUT
      text
module user_command_9001 input.
endmodule.                 " USER_COMMAND_9001 INPUT
*&      Module exit_9001 INPUT
      text
module exit_9001 input.
case sy-ucomm.
when 'EXIT'.
set screen 0.
endcase.
endmodule.
        exit_9001 INPUT

you can read the table node_table with nody key value which imports when docubble click the the tree node (Double clifk event).
Regards,
Gopi .
Reward points if helpfull.

How to take report for Employee past pay results!!!

Hi Experts,
I would like to know how to generate report for employee's past pay roll, which gives information pertaining to employee's pay hike if any and other details.
Please advice...subbu14blueatgmail.com
Thank you in advance for your help.
Regards,
Subbu

Hi,
Pc00_M40_calc though you can do the live run then
go PC00_m99_CWTR here you can select the payroll period button
There you can give the payroll area and selection periods.
Then you can give the company code, and what ever you can personnel area wise and all.
Below that screen you need to select the Lay out variant.
Then you can execute that report.
Then you will get the wage types and the amount.
Any query's let me know.
Thanks and Regards,
Revathi.

How to Get the Job, Cost center, Position description using select query

Hi all,
How to get the Job, Cost center, Position description through select query without using the Function module?
thanks,
Prasad

use adhoq query and take the report chose both text and value

How to generate report for Service sheet - ECC 6.0

Hi
Can anyone let me know regarding how to generate reports for service sheets entered
regards
Sanjay

Hi,
Get Service Entry Sheet with following T.codes:
1.MSRV6
2.ML84
Regards,
Biju K

How to get report in excel format instead of pdf from oracle forms.

Hi,
How to get report in excel format instead of pdf from oracle forms.
Form & Report developer 10g
report format .rdf

create a report using report builder.
call the report from form using the following procedure
DECLARE
     RO_Report_ID REPORT_OBJECT;
     Str_Report_Server_Job VARCHAR2(100);
     Str_Job_ID VARCHAR2(100);
     Str_URL VARCHAR2(100);
     PL_ID PARAMLIST ;
BEGIN
PL_ID := GET_PARAMETER_LIST('TEMPDATA');
     IF NOT ID_NULL(PL_ID) THEN
DESTROY_PARAMETER_LIST(PL_ID);
     END IF;
     PL_ID := CREATE_PARAMETER_LIST('TEMPDATA');
     RO_Report_ID := FIND_REPORT_OBJECT('RP2RRO');
     Add_Parameter(pl_id,'P_SUPCODE',TEXT_PARAMETER,:CONTROL.S_CODE);
Add_Parameter(pl_id,'P_INVOICE_NO',TEXT_PARAMETER,:CONTROL.IN_NO);
Add_Parameter(pl_id, 'PARAMFORM', TEXT_PARAMETER, 'NO');
     SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_FILENAME, 'INVOICE_REG_DETAILS.rep');
     SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_COMM_MODE, SYNCHRONOUS);
     SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_EXECUTION_MODE, BATCH);
     SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_DESTYPE, FILE);
     SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_DESFORMAT, 'SPREADSHEET');
     SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_SERVER, 'rep_dbserver_frhome1');
     Str_Report_Server_Job := RUN_REPORT_OBJECT(RO_Report_ID, PL_ID);
     Str_Job_ID := SUBSTR(Str_Report_Server_Job, LENGTH('rep_dbserver_frhome1') + 2, LENGTH(Str_Report_Server_Job));
     Str_URL      := '/reports/rwservlet/getjobid' || Str_Job_ID || '?server=rep_dbserver_frhome1';
     WEB.SHOW_DOCUMENT(Str_URL, '_SELF');
     DESTROY_PARAMETER_LIST(PL_ID);
END;

How to get LASTDAY for each and every month between given dates..

Hi Friend,
I have a doubt,How to get LASTDAY for each and every month between given dates..
for ex:
My Input will be look like this
from date = 12-01-2011
To date = 14-04-2011
And i need an output like
31-01-2011
28-02-2011
31-03-2011
is there any way to achieve through sql query in oracle
Advance thanks for all helping friends

Here's a 8i solution :
select add_months(
         trunc(
           to_date('12-01-2011','DD-MM-YYYY')
         ,'MM'
       , rownum ) - 1 as results
from all_objects
where rownum <= ( months_between( trunc(to_date('14-04-2011','DD-MM-YYYY'), 'MM'),
                                  trunc(to_date('12-01-2011','DD-MM-YYYY'), 'MM') ) );
The above two query is worked in oracle 11GActually the first query I posted is not correct.
It should work better with
months_between(
   trunc(to_date(:dt_end,'DD-MM-YYYY'),'MM'),
   trunc(to_date(:dt_start,'DD-MM-YYYY'),'MM')
)Edited by: odie_63 on 12 janv. 2011 13:53
Edited by: odie_63 on 12 janv. 2011 14:11

How to get report for cost estimates material cost only

Similar Messages

Maybe you are looking for