How to 'get rid' of a page flow template

I added a page flow template instead of a page flow and wanted to delete it (get rid of it forever) but couldn't see how to. So I selected 'exclude project content'. Then I created a new page flow with the same name but it went back to the other item I excluded. Then I tried to change it to a page flow but I couldn't get it back into my project. I finally closed JDev and deleted the project and am starting over. How does one delete one of these?

I'm not sure I understand you correct.
If you want to get rid of the template, go to the file system folder and just delete the template file. If your jdev was open you have to refresh the project. It's normaly better to close jdev before deleting the template in the file system and then start jdev again. Jdev then will rescan the directories and delete the file from the jpr file.
Timo

Similar Messages

  • "Portal Content Area Builder" how to get rid of this page heading?

    "Portal Content Area Builder" how to get rid of this page heading?
    Hi All
    I have created a Single page Website..??? by using folders.
    when a user click on any link that call a folder but not a page and that folder is displayed with the layout specified in "Content Area Page" however there is no such option available to change the Heading <Title>Page title</Title> for browsers so for every folder called it displays a Oracle defined Content area page title.
    "Portal Content Area Builder"
    Is there anywork around for this.
    Thanks.
    Rakesh.

    This problem is fixed in Release 2. There is no supported workaround in 3.0.

  • How to get rid of the main text box in the back of the page AND move things

    I usually work in Adobe Illustrator, Photoshop, and InDesign, but am creating two newsletter templates in Pages for a colleague, since it will be easier for her. But, for the life of me, I can't figure out how to get rid of the main text box in the back of the page that is driving me crazy. I just want a nice blank page that I can do whatever I want with. AND, I can't figure out how to select things so that I can move them, like shapes and text boxes. Some things seem to move fine, then other things just sit there. I am at the end of my rope!!!

    Hi, Dylan. Welcome to Discussions.
    If you're referring to the area where you just start typing when you open a new blank document, you can't get rid of it. But you also don't have to use it. You can insert text boxes and size and position them as you desire. Just be sure they're defined as Fixed on Page. When one is full and you want to continue it to another page (or to the side), click in the blank blue box on the lower right side of the text box. That will create another box and your overflow text will flow into it. Then position it where needed.
    Also, you can create a text box the width of the page and then set it for 2 or more columns.
    When you want to send something to the back and you may want to access it again later, just use the send backward command. If you send it all the way to the back, it will be behind the main text layer (where it will be safe from acvcidental movement) but you will have to click outside the work area and then drag the pointer to the object to select it.
    Hope this helps to get you started.
    Walt

  • How to get rid of the Login page in Portal?

    Hi Guys,
    I have a newly developed intranet portal project for my company which does not need login no more. I hope you can help me how to get rid of the login page in portal which is I know in every application you create, there should be a login. Is this possible that I can just simply type in to the URL address bar my application then it will no longer ask for any logins? Please help! Many thanks!
    Russel

    Hi Russel,
    You can give public access to pages, applications etc. Users won't need to supply a username/password then, while you still can hide some of the pages to authorized people.
    Check the access tab for pages and the manage tab for applications.

  • Printing Docs - how to get rid of 3 inch wasted space on right side of page

    I tried to print out : Communicating With Objects
    http://developer.apple.com/mac/library/documentation/Cocoa/Conceptual/CocoaFunda mentals/CommunicatingWithObjects/CommunicateWithObjects.html
    After trying several different settings and printed only the first page until I got the print more or less the way I wanted it, however...
    I have a standard HP Color Laserjet 2600n, looked at all the printing preferences, and all four margins are set at (.25 inch), yet when the pages print out there are about 2.5 inches of wasted space on the left side. The space is there for the Table of Contents, but there is nothing printed there, the space is blank.
    So I clicked on the Table of Contents header, so the TOC became hidden and the window only contained the text and images, then when I tried to print, I found that now there were about 3 inches of white space on each page on the right hand side. This is somewhere around a 40% waste in paper, trees, etc.
    One would think that expensive as printing is, there would be a way to save paper by optimizing coverage on each page as much as possible.
    Another curious thing is that the size of the text on the screen is easy to read at Safari normal (default) settings, yet when the first page is printed the text is really small.
    In order to get the size of the print on the paper to be easily readable, I had to click on the large [a][A] at the top of the Safari window twice (+ 2 sizes). The text on the window was fairly large, but the print became easy to read. There was still an excessive amount of wasted space, which just goes against the grain...
    Does anybody have a clue how to get rid of all the wasted space on each page ? There has to a simple way, this is 2010 and we've been doing this for 25+ years now.
    I am sure it is something simple that I am overlooking ? I'd be grateful for any help.
    Thank You,
    Bill Hernandez
    Plano, Texas

    What browser are you using? Try downloading a PDF if one is available, or try printing from XCode's Deveoper Documentation window.

  • Hi, I have this green mark (with pointing arrow looks like a link) on some words show on my window screen when I open a web page, I wonder if it is a virus link or such. Need help how to get rid of it. Thanks

    Hi, I have this green mark (with pointing arrow looks like a link) on some words show on my window screen when I open a web page, I wonder if it is a virus link or such. Need help how to get rid of it. Here's the example:
    WING
    GAMES
    MAJORITY
    Thanks

    If the third link you posted (the link containing the word "majority") does not look like the following then you inadvertently installed adware.
    That particular page should resemble the following:
    The word "majority" in the third paragraph should not be a link and should not have the green icon associated with it.
    To learn how this may have occurred, and how to prevent it from occurring in the future, read How to install adware
    Most so-called "news" websites are nothing more than entertainment outlets that cater to prurient interests, and contain advertisements that leave the user about three clicks away from installing junk. If you decide to frequent those websites, Safari's "Reader" feature helps minimize that exposure.
    Try it:

  • How do I get rid of a page number that's not in the header of a Pages doc?

    On one of my pages document is a page number beside the header area but not in the header.
    I can't select it, can't find anything in the Pages help to tell me how that page number came about and how to get rid of it.

    Try Format > Advanced > Make Master objects selectable.
    S.

  • HT1349 How do I get rid of web pages I'm through viewing?

    How do I get rid of web pages I'm through viewing?

    Not sure exactly what you mean but while you are using Safari, just tap the X on the left side of the tab to close a it. Only the active tab shows the X. You have to tap on a tab to make it active or the foremost window.
    If you want to clear the history - Settings>Safari>Clear History.
    These are instructions for Safari in iOS 5. What version are you running?

  • I've an iMac with OS X 10.4.11. Sudden email problem: every received email has, after the header, 1 - 2 pages of technical data (e.g., Dkim-Signature, Domainkey-Signature, etc.) I don't know why this now happening, and I don't know how to get rid of it.

    I have an iMac using OS X 10.4.11. Beginning several days ago, all incoming emails have, after the usual email header and before the message appears, one to two pages of technical data (e.g., Dkim-Signature, Domainkey-Signature, Content-Transfer-Encoding, etc.). This is similar and more complex that the info one receives when an undeliverable email bounces back. I don't know where this stuff comes from, or how it came, and I don't know how to get rid of it. Any ideas? I'm something of a newbie to computers (um, what's a Tag?).

    That just sounds like the mail headers. Most people don't know (or care) about them so they're usually hidden.
    Check Mail -> Preferences -> Viewing -> Show header detail
    I'm guessing it's set to 'All'. Switch it to 'Default' or None as you prefer.

  • How can get rid of indent in pages?

    it's been hours I am trying to figure out how to get rid of the indents that i am getting automatically while using pages. I am not pressing any Tab. I am used to of using MS Office, and now this is annoying how I have to waste my time figuring this out! HELP NEEDED!

    Greetings Harde sean,
    Welcome to the Apple Support Communities!
    It sounds to me like you have have tab stops in the document you are working on in Pages causing an indent. To move or set these tab stops, please use the information located in the attached link. 
    Set tab stops - Pages Help
    Cheers,
    Joe

  • How eo get rid of the annoying pop-up box just below the search box on the mozilla home page when I open mozilla?

    how eo get rid of the annoying pop-up box just below the search box on the mozilla home page when I open mozilla?

    That is the snippet container.
    You can hide that container or set the <b>browser.aboutHomeSnippets.updateUrl</b> pref to an empty String on the <b>about:config</b> to make Firefox use some default snippets.
    *http://kb.mozillazine.org/about:config
    You can hide the box that shows the snippets with code in userContent.css
    *http://kb.mozillazine.org/Editing_configuration
    You can use the ChromEdit Plus or Stylish extension to have easier access to the customization files.
    *ChromEdit Plus: http://webdesigns.ms11.net/chromeditp.html
    <pre><nowiki>@-moz-document url(about:home){
    /* hide snippet container on the about:home page */
    #snippetContainer { display: none !important; }
    }</nowiki></pre>
    Can you attach a screenshot if you mean something else?
    *http://en.wikipedia.org/wiki/Screenshot
    Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).

  • I have a problem mackeeper keep opening up another tab and these little green circle stuff keep popping up on the page and overtime my cursor hover over it it pops up a little box with stuff in it does anyone have an idea how to get rid of it?

    i have a problem mackeeper keep opening up another tab and these little green circle stuff keep popping up on the page and overtime my cursor hover over it it pops up a little box with stuff in it does anyone have an idea how to get rid of it?

    You installed a variant of the "VSearch" trojan. Remove it as follows.
    This malware has many variants. Anyone else finding this comment should not expect it to be applicable.
    Back up all data before proceeding.
    Triple-click anywhere in the line below on this page to select it:
    /Library/LaunchAgents/com.2c232f1e4d12129e.agent.plist
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
    Repeat with each of these lines:
    /Library/LaunchDaemons/com.2c232f1e4d12129e.daemon.plist
    /Library/LaunchDaemons/com.2c232f1e4d12129e.helper.plist
    Restart the computer and empty the Trash. Then delete the following items in the same way:
    /Library/Application Support/2c232f1e4d12129e
    /System/Library/Frameworks/v.framework
    The trouble may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
    This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
    In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere  should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
    Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
              Install system data files and security updates (OS X 10.10 or later)
    or
              Download updates automatically (OS X 10.9 or earlier)
    if it's not already checked.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • IOS warning new 'Pages' How to get rid of it

    I don't want to use Maverick(I tried with complete Keychain disaster bug and all) and I don't want Pages 13!
    Using Pages 9 on iOS and Mac OS 10.8.x is okay for me.
    How to get rid of the iOS in-app warning to update Pages?

    You can hide your purchases, which you can do from the QuickLinks > Purchased option from the main page in the iTunes Store on your computer. This won't hide any apps that are on your device, just those in your purchase history when you go to re-download any. Whether it will stop the new app update available messages, I'm not sure.

  • When opening safari , i get a yahoo page. why ? and how to get rid of it?

    when opening safari , i get a yahoo page. why ? and how to get rid of it?

    Check the links below for options to remove the Adware
    http://www.adwaremedic.com/index.php
    Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support
    You may need to force quit Safari, the. Reopen Safari while holding the Shift key.

  • Amost every page I open, Firefox asks whether to enable Flash player. How to get rid of this nagging pest ?

    Amost every page I open, Firefox takes a line off my netbook screen to ask whether to enable Flash player.
    How to get rid of this nagging pest ?

    downloaded 17MB flash installer from Adobe website.
    This download did not run properly, reporting that it had some error.
    Still plagued with FireFox queries about Flash.
    Don't much care about having flash plugin in FireFox.
    Prefer to download a flash file, scan with virus checker, then play it with VideoLAN.
    So I disabled Flash plugin to "Never Ask" but still the noxious popup
    "FireFox has prevented the outdated plugin "Adobe Flash" from running on helpx.adobe.com. Continue Blocking ? Allow ... X"

Maybe you are looking for

  • Ical not syncing to computers

    Hoping someone can help. We have a Macbook and an iMac with all latest software updates running OS 10.5.4. The ical on the computers will not update to stay in sync despite multiple attempts at syncing including resetting sync data. Th odd thing is o

  • Time machine will not back up to time capsule

    Time machine will not back up to my Time Capsule on my MacPro running SnowLeopard. Error message says it cannot access the backup file. I have reset the TC, and erased the drive and I get the same error on initial backup. I can see the volume and dra

  • IOS 8 Problem to play video on web site

    I updated my iPad Air from iOS 7 to iOS 8 and now I can not to play video on web site drtuber.com. All my another equipments based on IOS 7  are playing the same video on the same web site normally as usually. I think that it is a problem with iOS8 P

  • Syn. between Oracle, Access and SQL Server

    In my system, it involved three different db i.e. Oracle, MS Access, MS SQL Server. Is there way to perform syn. automatically when the data of one of the db is changed? p.s. Three DB is located on different NT Server machine.

  • Use PI between J2EE and CRM for JCO/RFC?

    Hello, I have a question concerning the use of PI RFC-Adapter: is it possible to use PI as an intermediator between a Netweaver J2EE System which connects to another system (eg. ABAP) using JCO/RFC (giving the following setting: [NW Java -> JCO] -> [