How to get rid of compounded keys on WebI report

Hello,
I am (very) new to Business Objects and Web Intelligence, and have created a Universe on a BW multicube. 
When I setup the WebI report doc, the Fiscal year (and Fiscal Period/year) are showing with the Fiscal Variant as a prefix (e.g. Z3/2009). 
Using a formula to 'strip' the characteristic to 2009 confuses the data (as there is no 'key' of 2009, only Z3/2009).
Filtering by Fiscal Variant (the Z3 part) doesn't seem to change things, or even putting the fiscal variant in as a column (these techniques used to work quite nicely in Bex and Web Bex). 
Is there some magic I have missed in the Universe building process (which I have purposefully kept very simple, as there are plenty of these to build!!). 
I am sure folks have seen (and sovled) this before, as Fiscal Year (and Fiscal Period/year) must be used often, and these are standard SAP time fields. 
However, i can find nothing in help or even forums (perhaps I am not searching for correct key words). 
I haven't tried building the universe off a Bex Query, and am kind of reluctant to do this, as it builds in another layer to maintain. 
Anyone know how to get rid of the compounded part of the (fiscal year) objects? 
Your help and comments are much appreciated. 
Regards, 
Martin.

Hi Ingo,
I am also facing the same problem.
I have an object Showing (TR/1223xxxx). I was able to remove "TR/" in bex by dragging the compunded object in Rows section and supressing it to "No Display" but in Webi I am still getting (TR/1223xxxx).
In Webi if I create a formula and trim the above value, i am getting "#UNAVAILABLE" in Key Figures, i.e. measures (smar Measures)
Is there a way to get rid of this compunded value.
One more requirement, in Bex Query, I am giving dislay as "Key and Text" but in Webi, i get only "Text" for that object. I have to explicitply drag and use the Object - key (detail object of that particular dimension). Is there a way to get both Key and Text in Webi using a single object.
Kindly help. Thank You!
Edited by: Aikansh on Mar 9, 2012 8:49 AM

Similar Messages

How to get rid of compound information from nodes

Hi expert,
       I have a hierarchy used for cost center in the report, when displaying cost center, its compound 'controlling area' is also displaying. such as for a node, its key value is 'CM01FIAC_FR_EA', in wich 'CM01' is for controlling area. I am trying to remove controlling area from display of cost center.
       for cost center, I have removed its compound from displaying by adding controlling area into row and setting it as 'no display', but for nodes of cost center hierarchy, compounds are still ther. please tell me how to get rid of compound information from nodes?
Many Thanks,

Hi Phani,
      cost center is displayed in hierarchy, I have remove compound from leaf of hierarchy, but compound is still there in nodes. also eventhough I set suppress result for controlling area, its result is still in the report. so you reference does not resolve my problem.
Many Thanks,

How to get rid of compound value in hierarchy

Hello,
I want to use hierarchy of cost centers in bex report.
I don't want to see the compound value 1000 (controlling area) as part of the keys.
For example, instead of -
1000IS3
     1300
     1400
I want to see -
IS3
     1300
     1400
1300 and 1400 are the cost centers and IS3 in a higher level.
Is it possible?
Thank you,
Hadar

Hadar,
Add a drilldown by Controlling Area to your report, then set it's properties to 'No Display'. That should give you the desired results.
Hope this helps...
Bob

How to get rid of unassigned values in the report

hai to all,
here is the issue,
while running a report(sales per country), iam getting the data,after that when i drill down on sales document number iam getting some unassigned data, with Sales document number as #, and some value in the keyfigure.what is the reason behind this?
Here is another issue that i want to find all the sales documents which have the value # in the report?, is it possible? the same case with Customer country, on the same report.
pl anyone help me
br
venkat/shyam

Hi Shyam.
Regarding the first issue: Well, you've loaded some data records into your cube where the "Sales Doc Field" is empty. Did you load through PSA? The best way to scan your PSA (I believe) is to find the underlying table and have a look at it via SE16. In this way you don't have to scan through every data single package. This can be done via "display data flow" from your cube and switch on technical names. There you have it. (It's called /BIC/B00...etcetc you might have to add i few zeroes though when you enter it into SE16). Get request ID from "Infocube Managment". In SE16 seelction screen use F2 to set the "sales Doc No." field even to blank.
Second issue is a bit easier: in your query (or a working copy of your query) restrict on "Sales Doc No" or "Customer Coutry" to only include value "#". In the same way you can remove the unassigned values be excluding value "#".
Hope this works for you.
Chears, Jørn

I've got OSX/Genieo.A virus on my mac and don't know how to get rid of it and why I have it

I've got OSX/Genieo.A virus on my mac and don't know how to get rid of it and w I have it

There is no need to download anything to solve this problem.
You installed the "Genieo" malware. The product is a fraud, and the developer knowingly distributes an uninstaller that doesn't work. I suggest the procedure below to disable Genieo. This procedure may leave a few small files behind, but it will permanently deactivate the malware (as long as you never reinstall it.)
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
Triple-click anywhere in the line below on this page to select it:
/Library/Frameworks/GenieoExtra.framework
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.
If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder should open with an item named "GenieoExtra.framework" selected. Move that item to the Trash. You'll be prompted for your administrator password.
Move each of these items to the Trash in the same way:
/Applications/Genieo.app
/Applications/Reset Search.app
/Applications/Uninstall Genieo.app
/Library/LaunchAgents/com.genieo.completer.update.plist
/Library/LaunchAgents/com.genieo.engine.plist
/Library/LaunchAgents/com.genieoinnovation.macextension.plist
/Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
/Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
/usr/lib/libgenkit.dylib
/usr/lib/libgenkitsa.dylib
/usr/lib/libimckit.dylib
/usr/lib/libimckitsa.dylib
~/Library/Application Support/com.genieoinnovation.Installer
~/Library/LaunchAgents/com.genieo.completer.download.plist
~/Library/LaunchAgents/com.genieo.completer.update.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those listed above, move them as well. Some of these items will be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
Step 2
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Your web browser(s) should now be working, and you should be able to reset the home page and search engine. If not, stop here and post your results.
Make sure you don't repeat the mistake that led you to install this trojan. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad has a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If youever download a file that isn't obviously what you expected, delete it immediately.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that this Internet criminal has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
Finally, be forewarned that when Genieo is mentioned on this site, the attacker sometimes shows up under the name "Genieo support." He will tell you to run a fake "uninstaller." As he intends, the uninstaller does not completely remove the malware, and is in fact malware itself.

How to get rid of the weblogic.kernel.Default errors and warning?

Hi there,
When i'm running my application deployed on WLS8.1 SP3 and the application is running fine, but the following error and warnings were thrown.
2004-08-05 11:26:30,453 [ExecuteThread: '13' for queue: 'weblogic.kernel.Default'] ERROR com.bea.wlw.runtime.core.util.Config - Failed to obtain connection to datasource=cgDataSource, using generic DB properties
<Aug 5, 2004 11:26:30 AM SGT> <Error> <WLW> <000000> <Failed to obtain connection to datasource=cgDataSource, using generic DB properties>
2004-08-05 11:27:12,281 [ExecuteThread: '13' for queue: 'weblogic.kernel.Default'] WARN org.apache.jcs.config.OptionConverter - Could not find value for key jcs.default.elementattributes
2004-08-05 11:27:12,282 [ExecuteThread: '13' for queue: 'weblogic.kernel.Default'] WARN org.apache.jcs.engine.control.CompositeCacheConfigurator - Could not instantiate eAttr named 'jcs.default.elementattributes', using defaults.
2004-08-05 11:27:12,308 [ExecuteThread: '13' for queue: 'weblogic.kernel.Default'] WARN org.apache.jcs.config.OptionConverter - Could not find value for key jcs.system.groupIdCache.elementattributes
2004-08-05 11:27:12,308 [ExecuteThread: '13' for queue: 'weblogic.kernel.Default'] WARN org.apache.jcs.engine.control.CompositeCacheConfigurator - Could not instantiate eAttr named 'jcs.system.groupIdCache.elementattributes', using defaults.
2004-08-05 11:27:12,386 [ExecuteThread: '13' for queue: 'weblogic.kernel.Default'] WARN org.apache.jcs.config.OptionConverter - Could not find value for key jcs.region.CodeTableCache.elementattributes
2004-08-05 11:27:12,386 [ExecuteThread: '13' for queue: 'weblogic.kernel.Default'] WARN org.apache.jcs.engine.control.CompositeCacheConfigurator - Could not instantiate eAttr named 'jcs.region.CodeTableCache.elementattributes', using defaults.
2004-08-05 11:27:13,527 [ExecuteThread: '13' for queue: 'weblogic.kernel.Default'] WARN com.bea.wlw.netui.script.el.NetUIReadVariableResolver - Could not create a ContextFactory for type "com.bea.netuix.servlets.script.PortalVariableResolver$PortalContextFactory" because the ContextFactory implementation class could not be found.
May i know why this is so? How to get rid of these error and warnings?
Thanks
Derek
Message was edited by derekchan at Aug 4, 2004 8:41 PM
Message was edited by derekchan at Aug 4, 2004 8:42 PM

you didnt seem to have configured the datasource / connection pool / database control with proper db properties
you should check your configuration to see if you have done it right and then you should check your application and the properties settings in the controls to ensure they are right.

How to get rid of the black border around the artboard

Hopefully my last question for tonight.
I need to get rid of the black border around the artboard. The two images show my drawing lined up with the art board and then inside the artboard. The dark gray is not the artboard.
As you see, the artboard has a black border. I need to get rid of it. It shows up in my project when my color key is green. The black won't go to transparent.
So how-to get rid of the border? Thanks
***Update***
I figured it out. View > Hide Artboards. Maybe this will help someone. Doesn't change the fact my spider looks like a tick:)

Doesn't change the fact my spider looks like a tick:)
Try to get hold of a real spider and take a look at its anatomy, specially where the legs sprout from :-)

How to get rid of the on screen volume display?

how to get rid of the on screen volume display, it stays on even after reboot. and when i hit the volume button another one shows on top of it.

Sounds like a key on the keyboard is stuck down. Does it disappear if you disconnect the keyboard?

How to get rid of the new bottom layer with piano roll etc. in arrange??

Hey guys,
Just a quick question i suppose.
I work with 2 screens.
When I double click a midi event, i want the piano roll to open in a floating window, just like it used to be, and not in the new bottom layer (pop up) bar in the bottom of the arrange window. I want this because i like to edit on the second screen while still haveing an overview of my arrange on my 1st screen.
Does anyone know how to do this? Or perhaps know how to get rid of this new bar all together?
I hope someone does....
thanks in advance!
cheers,
PM

how annoying is it to go to a seperate screen set and then click a midi region just to edit it?
You haven't grasped the concept of screensets.
In the "old" way of working, in your arrange, you double-click on a region, which opens that region in an editor. You may have to move the editor position/size etc. You make your edits, and then close the window.
The screenset way of doing this is simpler and quicker. In your arrange, you select your region (one click, rather than a double click). You then hit a key command, lets' say "2" to switch to your editor screenset, which has the eitor or combination of editors you use, in link mode. As soon as you hit your 2 key, the editors will be recalled at the precise locations you specified, showing you the contents of your selected region.
When you are finished editing, just hit "1" to go back to your main arrange window.
Once you get used to this, you'll find it's a lot quicker and more efficient than all that rsi double clicking and window closing...

How to get rid of shadowed border around screen on MacBook Pro?

Just wondering if anyone knows how to get rid of this shadowed border on the screen of my macbook pro. I think my young daughter made it appear when she was striking various keys at random on my computer when I was not there. The cursor does not work when its over the shadow (i.e. will not depress the red 'x' button to exit a window and I have to drag window out from under shadow to close it).
It also appears in the middle of screen when airplay is turned on. (See screen shots below)
I have been unable to find any other discussion on this issue.
Above is screen normally and below is when airplay is turned on. Please help, thanks.

Hi rose_hedley,
I'm wondering if you have restarted your computer by now and if that helped.
That border is from Exposé with Show Desktop enabled (F11).
Mac Basics: Exposé (Mac OS X v10.6 and earlier)
http://support.apple.com/kb/ht2503
Need to temporarily clear the clutter? Press F11 and watch all your windows scamper away.
Take care,
Nubz

Icons in finder bar; what do they mean and how to get rid of them

Hi I notice these icons in my finder bar. I'm confused; what are they there for and how to get rid of them?
Thanks for the help!

One is a Flash movie project and the other two a PDF files - you usually have them in your Finder window bar because you've dragged them to that location. You can get rid of them by selecting the icon with the Command key held down and drag them to the Desktop - poof! - they'll disappear.
Clinton

How to get rid of ROWID in Join query -- ORA-00918: column ambiguously defined

Hi, All
the source of my data block is from two tables Emp and Title. My select statements is:
select a.name, b.title, b.start_date, b.end_date from Emp a, Title b where a.id = b.emp_id
But at run time, I got "ORA-00918: column ambiguously defined"
the wrapped statement becomes:
SELECT ROWID,a.name, b.title, b.start_date, b.end_date from Emp a, Title b where a.id = b.emp_id
I run the query in SQL*PLUS, found out it was ROWID caused problem.
Can anybody tell me how to get rid of ROWID? or I missed something in datablock defination?
Thanks in adance.
Deborah

I guess you are using oracle 7.x. In Oracle 8 and onwards, database lets you select ROWID from the views based on multiple views as long as view definition does not contain any aggregated functions or DISTINCT in it. Now coming back to forms ..Forms runtime engine uses ROWID to identify rows uniquely unless specified otherwise. If you are using forms 4.5/5.0 against Oracle 7.x , then change these properties and you should be able to run the form.
BLOCK PROPERTY
Key Mode : can be either updateable OR Non-updateable
( Certainly not 'Unique' .. That forces forms runtime engine to use ROWID to identify unique rows. )
ITEM PROPERTY
Identify one of the block items as unique. And then set the following property
Primary Key : True.
This should take care of rowid problem.
Regards,
Murali.
Hi, All
the source of my data block is from two tables Emp and Title. My select statements is:
select a.name, b.title, b.start_date, b.end_date from Emp a, Title b where a.id = b.emp_id
But at run time, I got "ORA-00918: column ambiguously defined"
the wrapped statement becomes:
SELECT ROWID,a.name, b.title, b.start_date, b.end_date from Emp a, Title b where a.id = b.emp_id
I run the query in SQL*PLUS, found out it was ROWID caused problem.
Can anybody tell me how to get rid of ROWID? or I missed something in datablock defination?
Thanks in adance.
Deborah

How to get rid of freeform input layer

Hey。Somehow i have started getting a gray layer for drawing letters every time i have a text input field。i dont know how to get rid of it permanently。also i can no longer hold down a letter to get a capital letter and the autocorrect doesnt work。help！justin

how annoying is it to go to a seperate screen set and then click a midi region just to edit it?
You haven't grasped the concept of screensets.
In the "old" way of working, in your arrange, you double-click on a region, which opens that region in an editor. You may have to move the editor position/size etc. You make your edits, and then close the window.
The screenset way of doing this is simpler and quicker. In your arrange, you select your region (one click, rather than a double click). You then hit a key command, lets' say "2" to switch to your editor screenset, which has the eitor or combination of editors you use, in link mode. As soon as you hit your 2 key, the editors will be recalled at the precise locations you specified, showing you the contents of your selected region.
When you are finished editing, just hit "1" to go back to your main arrange window.
Once you get used to this, you'll find it's a lot quicker and more efficient than all that rsi double clicking and window closing...

Somehow i have got mackeeper and the smartsearchnet on mac air. I do not know how to get rid of it! please help me

I have got mackeeper and smart search.net on my Mac air. I am new to mac's so i am so lost in how to get rid of things. Im not sure how i got it but i just want it gone now mac book is only a couple months old so running all latest programmes on it. Can anyone help me please?

You may have installed a variant of the "VSearch" ad-injection malware. Follow Apple Support's instructions to remove it.
If you have trouble following those instructions, see below.
Malware is always changing to get around the defenses against it. This procedure works as of now, as far as I know. It may not work in the future. Anyone finding this comment a few days or more after it was posted should look for a more recent discussion, or start a new one.
The VSearch malware tries to hide itself by varying the names of the files it installs. To remove it, you must first identify the naming pattern.
Triple-click the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
/Library/LaunchDaemons
In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "LaunchDaemons" may open. Look inside it for two files with names of the form
          com.something.daemon.plist
and
           com.something.helper.plist
Here something is a variable string of characters, which can be different in each case. So far it has always been a string of letters without punctuation, such as "cloud," "dot," "highway," "submarine," or "trusteddownloads." Sometimes it's a meaningless string such as "e8dec5ae7fc75c28" rather than a word. Sometimes the string is "apple," and then you must be especially careful not to delete the wrong files, because many built-in OS X files have similar names.
If you find these files, leave the LaunchDaemons folder open, and open the following folder in the same way:
/Library/LaunchAgents
In this folder, there may be a file named
          com.something.agent.plist
where the string something is the same as before.
If you feel confident that you've identified the above files, back up all data, then drag just those three files—nothing else—to the Trash. You may be prompted for your administrator login password. Close the Finder windows and restart the computer.
Don't delete the "LaunchAgents" or "LaunchDaemons" folder or anything else inside either one.
The malware is now permanently inactivated, as long as you never reinstall it. You can stop here if you like, or you can remove two remaining components for the sake of completeness.
Open this folder:
/Library/Application Support
If it has a subfolder named just
           something
where something is the same string you saw before, drag that subfolder to the Trash and close the window.
Don't delete the "Application Support" folder or anything else inside it.
Finally, in this folder:
/System/Library/Frameworks
there may an item named exactly
            v.framework
It's actually a folder, though it has a different icon than usual. This item always has the above name; it doesn't vary. Drag it to the Trash and close the window.
Don't delete the "Frameworks" folder or anything else inside it.
If you didn't find the files or you're not sure about the identification, post what you found.
If in doubt, or if you have no backups, change nothing at all.
The trouble may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
          Install system data files and security updates (OS X 10.10 or later)
or
          Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

I keep getting a community toolbar error message. I am running Yosemite. I have no idea what it is referring to. Any help on how to get rid of it?

I am getting a community toolbar error message on Safari. Does anyone know how to get rid of it? I am running Yosemite. Thank you!

To remove the "Conduit" spyware, take the steps below.
Triple-click the line below on this page to select it:
~/Library/Application Support/Conduit
Copy the selected text to the Clipboard by pressing the key combination command-C. From the Finder menu bar, select
          Go ▹ Go to Folder…
Paste into the box that opens (command-V), then press return. A Finder window should open with a folder named "Conduit" selected. If it does, delete the selected item.
Repeat with these lines:
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin /Applications/Toolbars
You may be prompted for your login password. Next, copy this line:
/Library
Select Go to Folder… again and paste. Don't delete the Library folder. Delete only the following items inside it, if they exist.
          Application Support/Conduit
          InputManagers/CTLoader
          LaunchAgents/com.conduit.loader.agent.plist
          ScriptingAdditions/ct_scripting.osax
Close the Finder windows you opened. Log out and log back in.
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Remove any extensions with the word "Conduit" in the description, and any others you don't know you need. If in doubt, remove all of them.

How to get rid of compounded keys on WebI report

Similar Messages

Maybe you are looking for