How to get rid of empty track.

Ok, another question for you. How do I get rid of empty track? I've got my film and then loads of empty track that I cant get rid of and when I put it into Quicktime it copies all the empty stuff too and it takes twice as long.

You explained it fine. FCP recognizes the end of your sequence. YOu can't delete the end. If you are getting loads of black at the end of your movie that would suggest that you have a clip somewhere way down the line that you are not seeing. Press shift-z to fit the timeline in the timeline window. Your movie should fill the timeline. If not, look at the end of the timeline and delete any media that you don't want to be included.

Similar Messages

How to get rid of "empty" volume

I have a Standard setup of Leopard Server.
When each user connects to the server the get an option to mount an "empty" volume. What's this and can I get rid of it without breaking anything?

Workgroup Manager that is. Thanks, that did the trick.
Also, all you need to do is select 'None' then save and it gets rid of the var in the process.
Message was edited by: Christiaan

How to get rid of empty lines in a file?

How can read a file "text.txt", delete all the empty lines and restore it to same filename "text.txt" without using a temporary file?

Ages ago I ruined an 8" floppy disk drive by doing something similar to
this: let b1 b2 ... bn nl be a series of blanks followed by a newline
character (nl) and let c1 ... cm be a sequence of other characters. Let
the total relevant sequence be:
b1 b2 ... bn nl c1 ... cm
Reverse the entire sequence: cm ... c1 nl bn ... b2 b1 and then
reverse the first m bytes: c1 cm nl bn ... b2 b1. Now repeat the entire
thing for the sequence c1 ... cm by checking for more blank lines in it.
After this has all finished, simply truncate the file.
The advantage of this method was that I only needed to be able to swap
two bytes in a file; the disadvantage was that the floppy disk drive
couldn't handle it ;-)
kind regards,
Jos

How to get rid of empty space in module pool screen?

Hello Experts,
In module pool, I have 2 table controls inside 2 separate boxes in the same screen. Based on some conditions I hide the first table control. It's all working fine. But the space where first table is created remains blank in the screen. I don't want that.If the first table control is hidden the second table control should occupy the empty space. I do not want empty space in the screen.
How can I acheive this.Is there anything I can set in the screen attribute level.
Thanks.
Yasin.

Hi Yasin,
As you said you have 2 sub screen areas and also 2 subscreens.
when hide the First subscreen from First Subscreen area, you need to assign the second subscreen on to the first subscreen area and a dummy subscreen on to second subscreen area, this is a kind of work around and bit tricky playing with screen elements
in Top Include
data dynnr type sy-dynnr value '100' " your default Subscreen number
in PBO
call subscreen sub1 including sy-repid dynnr1 " First Sub screen area
call subscreen sub2 including sy-repid dynnr2 " Second sub screen area
in PAI
module call_dyn_number.
in program.
case ok_code.
when 'HIDE'. " When you hide the first table control
dynnr1 = '200' " This is your second table control containing Screen number
dynnr2 = '300'. "This is a Dummy Screen Number which doesnt contain any screen elements so output is plain
" Note: This is a crude IDEA only as you try to implement you need to adjust this for the expected outcome
" I implemented this earlier but dont have complete ref at this moment
endcase.
Hope this serves your purpose
Cheerz
Ram

Adobe reader shows a horizontal empty window in OSX 10.9.3 after uninstalling Acrobat 8. How to get rid of it?

Adobe reader shows a horizontal empty window in OSX 10.9.3 after uninstalling Acrobat 8. How to get rid of it?

Macintosh HD > Library > Internet Plug-ins
Look for these two files.
AdobePDFViewerNPAPI.plugin
AdobePDFViewer.plugin
Right click on those and select “Move To Trash”.
Restart the computer.

How to get rid of tracking device/virus on iPad

HI , I think I may have a tracking device on my ipad, I received what ai thought was an email from my son and clicked on the link - something I dont normally do and now I cant log in to any of my memberships on safari and when I attempted to follow a link from an email from trademe it flashed past a site that said tracking - it was so fast i couldnt see the full name but i think it had ray in it as well, now I cant acess app store update , should I remotely erase my device and re start ? how do i get back in and reset everything is this the best way to get rid of this tracking thing , Im worried that if I erase it I wont be able to get back into it again,

I would go into settings>safari>clear autofill names and passwords, also clear cookies and history first, before resetting anything else. If that doesn't work then go into settings>scroll to the bottom and tap reset, then reset all settings. This will delete passwords, your WiFi settings and any other settings you have that you have to enter.
It is possible, as you have discovered to have what is known as drive by 'viruses' not really a virus but something that redirects your browser to another site with the intention of obtaining your details or causing you to be billed for a service you didn't want it you store credit card or bank details on your device.. Used to happen a lot with **** sites on PC's.
As above, I would delete the email. BUT advise your son that his mail account may be compromised with a bot auto sending emails to all in his contacts list, so he can fix it too.

How do I get rid of ad track king?

How do I get rid of ad track king for good?

The best that you can do is Settings>Privacy>Advertising>limit ad tracking>On.

I've got OSX/Genieo.A virus on my mac and don't know how to get rid of it and why I have it

I've got OSX/Genieo.A virus on my mac and don't know how to get rid of it and w I have it

There is no need to download anything to solve this problem.
You installed the "Genieo" malware. The product is a fraud, and the developer knowingly distributes an uninstaller that doesn't work. I suggest the procedure below to disable Genieo. This procedure may leave a few small files behind, but it will permanently deactivate the malware (as long as you never reinstall it.)
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
Triple-click anywhere in the line below on this page to select it:
/Library/Frameworks/GenieoExtra.framework
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.
If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder should open with an item named "GenieoExtra.framework" selected. Move that item to the Trash. You'll be prompted for your administrator password.
Move each of these items to the Trash in the same way:
/Applications/Genieo.app
/Applications/Reset Search.app
/Applications/Uninstall Genieo.app
/Library/LaunchAgents/com.genieo.completer.update.plist
/Library/LaunchAgents/com.genieo.engine.plist
/Library/LaunchAgents/com.genieoinnovation.macextension.plist
/Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
/Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
/usr/lib/libgenkit.dylib
/usr/lib/libgenkitsa.dylib
/usr/lib/libimckit.dylib
/usr/lib/libimckitsa.dylib
~/Library/Application Support/com.genieoinnovation.Installer
~/Library/LaunchAgents/com.genieo.completer.download.plist
~/Library/LaunchAgents/com.genieo.completer.update.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those listed above, move them as well. Some of these items will be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
Step 2
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Your web browser(s) should now be working, and you should be able to reset the home page and search engine. If not, stop here and post your results.
Make sure you don't repeat the mistake that led you to install this trojan. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad has a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If youever download a file that isn't obviously what you expected, delete it immediately.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that this Internet criminal has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
Finally, be forewarned that when Genieo is mentioned on this site, the attacker sometimes shows up under the name "Genieo support." He will tell you to run a fake "uninstaller." As he intends, the uninstaller does not completely remove the malware, and is in fact malware itself.

How to get rid of title bar of a quicktime window?

The main problem:
I want to display the title info etc about each track as they play in iTunes. How can I do that on an otherwise black screen (desktop) (I don't want to use the visualizer with its psychedelic patterns).
Background:
I want to play music from iTunes (many pieces in a row - for like a full day). While this is happening I want the title etc of the tune to be displayed on the screen, like white smallish text against a black background in the lower right hand corner. At the same time I want slides to be displayed on the screen.
So, with iPhoto I can run a slide show but only while one piece of music is playing.
Instead I can have the desktop slowly change (from system preferences) with images from a folder every 5 seconds. That's not too bad. Looks good, actually, except for that annoying menu bar at the top! Well, black tape can hide that one (or a second display and move it over there). Now iTunes can play away all day.
As to how to get the title etc of the song playing displayed I was thinking about somehow extracting it from iTunes with applescript, then paste it into the text track of a quicktime movie, and display that little movie in a small window. I have figured out how to get rid of the controller from the window. But, I can not figure out how to get the title bar of the quicktime window to go away - that is I want a window with nothing around it, neither controllers nor title bar nor anything. How do I create such a window. Any good ideas out there?
Or is there a totally different way of obtaining the same effect?
Thanks.
G4 Mac OS X (10.4.8)

Hi,
You could try posting at the QuickTime discussion area. There might be an iTunes visualizer that allows you to make a slideshow with track info. It has been a while since I tried making a SMIL file, but I think you could do what you want with that. Not sure how you create a streaming text of track information. I would have to do some reviewing.
gl,

How to get rid of the "other" memory

I need steps to find a way how to get rid of the "other" memory. Ive tried deleting my photos. But my memory is still low. My iphone 4 is a 8GB and still that isnt much, and to have this "other" memory take most of it up is making me mad. HELP PLEASE!!!!!!

About “Other”:
http://support.apple.com/en-us/HT202867
Go step by step and test.
1. Start up in Safe Mode.
    http://support.apple.com/kb/PH11212
2. Backup your computer.
3. Empty Trash.
   http://support.apple.com/kb/PH13806
4. Disk space / Time Machine ?/ Local Snapshots
Local backups
   http://support.apple.com/kb/ht4878
5. Delete old iOS Devices Backup.
    iTunes > Preferences > Devices
    Highlight the old Backups , press “Delete Backup” and then “OK”.
    http://support.apple.com/kb/HT4946?viewlocale=en_US&locale=en_US
6. Re-index Macintosh HD.
    This will take a while. Wait until it is finished.
    System Preferences > Spotlight > Privacy
    http://support.apple.com/kb/ht2409
7.Try OmniDiskSweeper. This will give the storage size details of the items.
   https://www.omnigroup.com/more
   Select Macintosh HD and click “Sweep Selected Drive” at the bottom.
   Be careful. Delete only the files that can be safely deleted. If you are not sure about any file, don’t touch it.
8. Move iTunes, iPhoto and iMovie media folders to an external drive.
    iTunes
    http://support.apple.com/en-us/HT201562
    iPhoto
    http://support.apple.com/kb/PH2506
    iMovie
    http://support.apple.com/kb/ph2289

How to get rid of the other from the MacBook Air Memory?

How to get rid of the other from the MacBook Air Memory? I reviewed my newly purchased MBA ear;y 2014 i7 8GB RAM and there was 24+ GB of "Other". I have Yosemite. I have restored to factory with no luck. is there a memory cleaner or process to eliminate what is not needed in Other? I know some files there are settings, and such but not 24+ GB worth is such of stuff.

About “Other”:
http://support.apple.com/en-us/HT202867
Go step by step and test.
1. Start up in Safe Mode.
    http://support.apple.com/kb/PH11212
2. Backup your computer.
3. Empty Trash.
   http://support.apple.com/kb/PH13806
4. Disk space / Time Machine ?/ Local Snapshots
Local backups
   http://support.apple.com/kb/ht4878
5. Delete old iOS Devices Backup.
    iTunes > Preferences > Devices
    Highlight the old Backups , press “Delete Backup” and then “OK”.
    http://support.apple.com/kb/HT4946?viewlocale=en_US&locale=en_US
6. Re-index Macintosh HD.
    This will take a while. Wait until it is finished.
    System Preferences > Spotlight > Privacy
    http://support.apple.com/kb/ht2409
7.Try OmniDiskSweeper. This will give the storage size details of the items.
   https://www.omnigroup.com/more
   Select Macintosh HD and click “Sweep Selected Drive” at the bottom.
   Be careful. Delete only the files that can be safely deleted. If you are not sure about any file, don’t touch it.
8. Move iTunes, iPhoto and iMovie media folders to an external drive.
    iTunes
    http://support.apple.com/en-us/HT201562
    iPhoto
    http://support.apple.com/kb/PH2506
    iMovie
    http://support.apple.com/kb/ph2289

How to get rid of files on time machine that no longer exist

I replaced my computer several months ago when my old one died. A large amount of data which was in a partition on my old computer is still on my time machine and is taking up a lot of space and forcing time machine to delete backups much sooner than I would like. I don't know how to get rid of it. If I try to delete that folder from an individual backup, I get the message, "The operation can't be completed because backup items can't be modified." Of course, I can't delete it from my new computer because it's not there! Any help appreciated.
Marion

The best method is to archive the contents of the TC to a disk.. archive is available via the airport utility.
Simply plug in a USB drive large enough to store all the material presently on the TC, 1TB or 2TB or 3TB.. whichever model it is.
Archive I have drawn red box around.
Once the archive has completed ..
Use the Erase disk.. just the Quick erase is ok.. takes a couple of min and then you have a nice empty drive to start loading TM backups on.

Having 200+ GB of "Other" Space in HD.. How to get Rid of it?

So I have 200 GB of other in my storage and Ive tried OmniDisk to get rid of stuff but nothing is making it have more space. Anyone have any other ideas to how to get rid of all this other space?

Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion's Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.
What is "Other" and What Can I Do About It?- Apple Support Communities

STOP "determining gapless playback info": how to get rid of it?

I have itunes 7 with macbookpro and 80 gigs of music on an external hard drive connected through USB to my Airpot Extreme 802.11n base.
I CANNOT USE itunes because it is endlessly "determining gapless playback info" (i'm using the French version who says "détermination des données de lecture sans intervalle")
though I DON'T NEED IT. This is the option that allow albums to play gapless... no such an improvement for a so slow process!
This morning it treated 200 songs in 5 hours... it has been one week i'm letting it work times to times but with this rhythm I still have to wait 350 hours = more than 15 days 24/24... without speaking of the extremely frequent cases when I have to "force to quit" and restard itunes.....
I CAN'T BEAR THAT ANYMORE... IS ALL THAT REALLY NECESSARY?
I cannot imagine this option cannot be unactivated... so please if someone can tell me how to get rid of this "determining gapless playback info" thing... I would be very happy...
Many thanks for your answer!

I'm having the exact same issue. I have a 802.11n Airport Extreme that has my 100 GB music library connected to it via the USB port, and my iTunes (on my MacBook Pro) connects to it via the Airport Disk. Each time I add a batch of new songs to the library, it takes for ever for iTunes to resolve the gapless information. I just added 30 tracks, and it took about 10 to 15 minutes, during which iTunes was completely inaccessible with the spinning beach ball.
My theory is that to determine gapless information, iTunes has to load each track into memory to analyze it. That goes by quick if the libary is direct connected, but over the network that can be a pain (especially if the mp3s are large).
I really wish Apple would make this feature "toggle-able" on a future release of iTunes.

How to get rid of locked file

I have a file that's locked that I kept in a folder titled junk because five years ago I couldn't figure out how to get rid of it. Just installed a new HD and tried to trash the folder and file. It's not working and now it's in two places because when I moved it it asked for name and password, then copied it into the trash and left it on the desktop. I know there must be a way to get rid of it. Secure Trash in Onyx didn't work. the file is nununu HFS+private data?
Any suggestions?

*Trash Problems*
If trash can't delete because an item is busy, try restarting the computer.
If trash won't delete because an item is locked, try holding down the option key when emptying the trash.
Try booting to Safe Mode (hold down the shift key while booting, restart may take a long time but let it go), sometimes just doing that works. Restart normally.
Reading
[You can't empty the Trash or move a file to the Trash in Mac OS X|http://docs.info.apple.com/article.html?artnum=106272]
[Solving Trash Problems|http://www.thexlab.com/faqs/trash.html]
[How To Fix Stubborn Trash and Why it Won't Delete|http://www.osxfaq.com/Tutorials/LearningCenter/HowTo/Trash/index.ws]
[rccharles: Discussion on trashing problem files with Terminal commands|http://discussions.apple.com/message.jspa?messageID=9168842#9168842]
*Utilities for emptying trash*
[Trash It! v3.6.1|http://www.nonamescriptware.com/?page_id=5]
[DropNuke|http://www.versiontracker.com/dyn/moreinfo/macosx/12664]
[Super Empty Trash 2.3|http://www.macupdate.com/info.php/id/16727] - Simple AppleScript applet that will empty the Trash with administrator privileges

How to get rid of empty track.

Similar Messages

Maybe you are looking for